Highly sensitive fiber-optic accelerometer using a micro suspended-core fiber.

A compact fiber-optic accelerometer was proposed and demonstrated experimentally based on Fabry-Perot interference (FPI). The device consists of a suspended-core fiber embedded in a hollow-core fiber, forming an enclosed cavity structure. A short section of multi-mode fiber (MMF) was spliced on the leading-in single-mode fiber (SMF), which worked as a micro lens to focus the light to decrease the transmission loss. A well-defined interference spectrum was achieved by a low-fitness FP interferometer formed by both the end-face of lead-in fiber and the end-face of suspended-core fiber. Thanks to the outstretched FP cavity by suspended-core fiber, the sensor is highly sensitive to vibration along the fiber axis. Moreover, a one-dimensional mechanical transducer was used to improve the frequency band of the sensor. By the side-band filtering technology, the vibration was detected and analyzed by a simple intensity interrogation technology.

All-fiber 3D vector displacement (bending) sensor based on an eccentric FBG.

We demonstrate a fiber-optic 3D vector displacement sensor based on the monitoring of Bragg reflection from an eccentric grating inscribed in a depressed-cladding fiber using the femtosecond laser side-illumination and phase-mask technique. The compact sensing probe consists of a short section of depressed cladding fiber (DCF) containing eccentrically positioned fiber Bragg gratings. The eccentric grating breaks the cylindrical symmetry of the fiber cross-section and further has bending orientation-dependence. The generated fundamental resonance is strongly sensitive to bending of the fiber, and the direction of the bending plane can be determined from its responses. When integrated with axis strain monitoring, the sensor achieves a 3D vector displacement measurement via simple geometric analysis.

High-spatial-resolution ultrasonic sensor using a micro suspended-core fiber.

A high-resolution fiber-optic ultrasonic sensor based on a suspended-core fiber was designed and experimentally demonstrated. The intrinsic Fabry-Perot interferometer consisting of a micro suspended-core from acid corrosion of a grapefruit fiber proved highly sensitive to a wide range of ultrasonic wave (UW) frequencies. A compact interrogation system using spectral sideband filtering was constructed for UW detection. The sensor exhibited significantly improved spatial resolution and detection sensitivity by etching the suspended-core diameter to few microns. Sensor fabrication involves only fiber splicing and corrosion, which provide a self-shielding cladding surrounding and protecting the core from collisions. This sensor is an excellent candidate for high-quality UW detection.

Ultrasonic imaging of seismic physical models using a fringe visibility enhanced fiber-optic Fabry-Perot interferometric sensor.

A fringe visibility enhanced fiber-optic Fabry-Perot interferometer based ultrasonic sensor is proposed and experimentally demonstrated for seismic physical model imaging. The sensor consists of a graded index multimode fiber collimator and a PTFE (polytetrafluoroethylene) diaphragm to form a Fabry-Perot interferometer. Owing to the increase of the sensor's spectral sideband slope and the smaller Young's modulus of the PTFE diaphragm, a high response to both continuous and pulsed ultrasound with a high SNR of 42.92 dB in 300 kHz is achieved when the spectral sideband filter technique is used to interrogate the sensor. The ultrasonic reconstructed images can clearly differentiate the shape of models with a high resolution.

Compact gas refractometer based on a tapered four-core fiber.

A compact in-line interferometer is proposed and experimentally demonstrated for gas refractive index (GRI) measurement. The sensor comprises a tapered four-core fiber (TFCF) sandwiched between two single-mode fibers (SMFs), forming an in-line SMF-TFCF-SMF structure. The fiber taper acts as a bridge between the external GRI variation and the multimode interference within the TFCF segment. A high sensitivity of 1280.94 dB/refractive index unit is obtained in GRI measurement around 1.0. Temperature change only shifts the interference wavelength, and the cross-sensitivity of temperature can be ignored by intensity demodulation. The proposed gas refractometer, with its improved performance, can be a good candidate for chemical sensing or bio-sensing.

Orientation-dependent fiber-optic displacement sensor using a fiber Bragg grating inscribed in a side-hole fiber.

We propose and experimentally demonstrate an orientation-dependent fiber-optic bending sensor. The sensing probe consists of a fiber Bragg grating inscribed in both the fiber core and the surrounding cladding of a section of a side-hole fiber. We utilized a side-illumination technique using a femtosecond laser to achieve the grating structure formation. The transmission intensities of both resonances are highly sensitive bending of the fiber, and the bending response shows orientation dependence. The surrounding temperature fluctuation causes a wavelength shift, but not an intensity variation. Therefore, the proposed sensor can be employed for simultaneous measurement of bending and temperature.

High-sensitivity optical fiber relative humidity probe with temperature calibration ability.

A high-sensitivity optical fiber relative humidity (RH) sensing probe with the ability of temperature calibration is proposed and experimentally demonstrated. It consists of a simple Fabry-Perot interferometer constructed by coating a layer of thin polyimide (PI) film on the end face of single-mode fiber and an upstream fiber Bragg grating (FBG). PI is one of the organic polymer humidity-sensitive materials with good comprehensive properties. The cascaded FBG is used for temperature calibration and elimination of the temperature cross-sensitivity in the process of measuring RH. Experimental results show that this sensing probe can realize simultaneous measurement of temperature and RH. The RH response sensitivity reaches up to 986.25 pm/%RH. This sensing probe with the advantages of simple structure, compact size, high sensitivity, easy packaging, and dual-parameter measurement has an extensive application prospect.

Temperature-independent hygrometry using micromachined photonic crystal fiber.

An in-fiber Mach-Zehnder interferometer (MZI) is proposed and experimentally demonstrated for relative humidity (RH) and temperature measurements. The MZI is formed by a grapefruit-shaped photonic crystal fiber (G-PCF) cascaded with a short section of multimode fiber that serves as a mode coupler. To enhance sensitivity to humidity, femtosecond laser micromachining was performed to remove a portion of cladding of the G-PCF to expose its core to the ambient medium. The output interference spectrum is fast Fourier transformed to produce a spatial frequency spectrum that describes the intensity composition of the cladding modes in the MZI. In our investigation, it was observed that the interference dip intensity has a sensitivity of -0.077 dB/% RH to the change of RH in the range of 25%-80% RH, whereas the dip wavelength has a temperature sensitivity of ∼3.3 pm/°C in the range of 25°C-70°C. In addition, the dip intensity was insensitive to temperature. These characteristics have provided convenience in eliminating temperature cross talk and achieving accurate humidity measurement.

Sensitivity-Improved Ultrasonic Sensor for 3D Imaging of Seismic Physical Model Using a Compact Microcavity.

A sensitivity-improved ultrasonic sensor is proposed and demonstrated experimentally in this present study. The device is comprised only a fiber-optic microcavity that is formed by discharging a short section of hollow core fiber (HCF). The key to ensuring the success of the sensor relies on the preprocessing of hydrogen loading for HCF. When discharging the HCF, the hydrogen is heated up during the formation of the air bubble, which enlarges the bubble diameter, smoothens its surfaces simultaneously and decreases Young's modulus of the material of the bubble. Ultimately, this results in the probe being highly sensitive to ultrasound with a SNR of 69.28 dB. Once the compact air cavity is formed between the end face of the leading-in fiber and the top wall of the bubble, a well-defined interference spectrum is achieved based on the Fabry⁻Perot interference. By using spectral side-band filtering technology, we detect the ultrasonic waves reflected by the seismic physical model (SMF) and then reconstruct its three-dimensional image.

A Submerged Optical Fiber Ultrasonic Sensor Using Matched Fiber Bragg Gratings.

A novel kind of fiber optic ultrasonic sensor based on matching fiber Bragg gratings (FBGs) is proposed and demonstrated. The sensors consist of a pair of matching FBGs fixed to a special bracket. The bracket plays a role in stretching and squeezing the FBGs, with the push⁻pull effect efficiently coupling the ultrasonic signal to the sensor, thus, improving the sensor’s sensitivity. Side-band filtering technology-based intensity interrogation was used to detect ultrasounds in water. With the synergic effect of the matching FBGs, the sensor performed with a high signal-to-noise ratio (56.9 dB at 300 KHz, 53 dB at 1 MHz and 31.8 dB at 5 MHz) and the observed ultrasonic sinusoidal signals were undistorted and distinguishable in the time domain.

Ultrasound-to-plastic optical fiber coupling as an acoustic source probe.

An integrated ultrasonic detection system that consists of emission and detection has been proposed and demonstrated experimentally. The proposed emission source is based on plastic optical fiber (POF). In order to promote the coupling of ultrasound-to-POF, and the end of the POF is heated to form a circular pedestal. A homemade fiber Fabry-Perot interferometer is employed to evaluate the coupling efficiency of ultrasound-to-POF. The sensing head is spliced with a short section of hollow-core fiber and single-mode fiber, resulting in an air microbubble formation by discharging. The experimental results show that ultrasound can be transmitted effectively in a narrow space using the coupling method, and the compact sensor also presents a considered sensitivity for ultrasonic detection. This all-fiber ultrasonic interrogation can be integrated as a system for the application in the bioimaging field, especially the organism body.

All-fiber magnetic field sensor based on tapered thin-core fiber and magnetic fluid.

A method for the measurement of a magnetic field by combining a tapered thin-core fiber (TTCF) and magnetic fluid is proposed and experimentally demonstrated. The modal interference effect is caused by the core mode and excited eigenmodes in the TTCF cladding. The transmission spectra of the proposed sensor are measured and theoretically analyzed at different magnetic field strengths. The results field show that the magnetic sensitivity reaches up to -0.1039 dB/Oe in the range of 40-1600 e. The proposed method possesses high sensitivity and low cost compared with other expensive methods.

Fiber Bragg Grating Sensors for the Oil Industry.

With the oil and gas industry growing rapidly, increasing the yield and profit require advances in technology for cost-effective production in key areas of reservoir exploration and in oil-well production-management. In this paper we review our group's research into fiber Bragg gratings (FBGs) and their applications in the oil industry, especially in the well-logging field. FBG sensors used for seismic exploration in the oil and gas industry need to be capable of measuring multiple physical parameters such as temperature, pressure, and acoustic waves in a hostile environment. This application requires that the FBG sensors display high sensitivity over the broad vibration frequency range of 5 Hz to 2.5 kHz, which contains the important geological information. We report the incorporation of mechanical transducers in the FBG sensors to enable enhance the sensors' amplitude and frequency response. Whenever the FBG sensors are working within a well, they must withstand high temperatures and high pressures, up to 175 °C and 40 Mpa or more. We use femtosecond laser side-illumination to ensure that the FBGs themselves have the high temperature resistance up to 1100 °C. Using FBG sensors combined with suitable metal transducers, we have experimentally realized high- temperature and pressure measurements up to 400 °C and 100 Mpa. We introduce a novel technology of ultrasonic imaging of seismic physical models using FBG sensors, which is superior to conventional seismic exploration methods. Compared with piezoelectric transducers, FBG ultrasonic sensors demonstrate superior sensitivity, more compact structure, improved spatial resolution, high stability and immunity to electromagnetic interference (EMI). In the last section, we present a case study of a well-logging field to demonstrate the utility of FBG sensors in the oil and gas industry.

UW Imaging of Seismic-Physical-Models in Air Using Fiber-Optic Fabry-Perot Interferometer.

A fiber-optic Fabry-Perot interferometer (FPI) has been proposed and demonstrated for the ultrasound wave (UW) imaging of seismic-physical models. The sensor probe comprises a single mode fiber (SMF) that is inserted into a ceramic tube terminated by an ultra-thin gold film. The probe performs with an excellent UW sensitivity thanks to the nanolayer gold film, and thus is capable of detecting a weak UW in air medium. Furthermore, the compact sensor is a symmetrical structure so that it presents a good directionality in the UW detection. The spectral band-side filter technique is used for UW interrogation. After scanning the models using the sensing probe in air, the two-dimensional (2D) images of four physical models are reconstructed.

A Compact Fiber Inclinometer Using a Thin-Core Fiber with Incorporated an Air-Gap Microcavity Fiber Interferometer.

A compact fiber-optic inclinometer is proposed and experimentally demonstrated based on a Fabry-Perot interference (FFPI). The sensing head consists of a short segment of thin-core fiber (TCF) following with a piece of hollow-core fiber (HCF). High-order cladding modes have been excited because of core diameter mismatch. A clear interference spectrum has been obtained as the consequence of interference among the reflected core modes and cladding modes. Fringe contrast of the interference spectrum is highly sensitive to fiber bending with direction independence, and good linearity has been observed during the bending range from 1° to 3° with a sensitivity of 2.71 dB/deg.

Orientation-Dependent Displacement Sensor Using an Inner Cladding Fiber Bragg Grating.

An orientation-dependent displacement sensor based on grating inscription over a fiber core and inner cladding has been demonstrated. The device comprises a short piece of multi-cladding fiber sandwiched between two standard single-mode fibers (SMFs). The grating structure is fabricated by a femtosecond laser side-illumination technique. Two well-defined resonances are achieved by the downstream both core and cladding fiber Bragg gratings (FBGs). The cladding resonance presents fiber bending dependence, together with a strong orientation dependence because of asymmetrical distribution of the "cladding" FBG along the fiber cross-section.

High-Frequency Fiber-Optic Ultrasonic Sensor Using Air Micro-Bubble for Imaging of Seismic Physical Models.

A micro-fiber-optic Fabry-Perot interferometer (FPI) is proposed and demonstrated experimentally for ultrasonic imaging of seismic physical models. The device consists of a micro-bubble followed by the end of a single-mode fiber (SMF). The micro-structure is formed by the discharging operation on a short segment of hollow-core fiber (HCF) that is spliced to the SMF. This micro FPI is sensitive to ultrasonic waves (UWs), especially to the high-frequency (up to 10 MHz) UW, thanks to its ultra-thin cavity wall and micro-diameter. A side-band filter technology is employed for the UW interrogation, and then the high signal-to-noise ratio (SNR) UW signal is achieved. Eventually the sensor is used for lateral imaging of the physical model by scanning UW detection and two-dimensional signal reconstruction.

Generation of dual-wavelength square pulse in a figure-eight erbium-doped fiber laser with ultra-large net-anomalous dispersion.

A type of wave-breaking-free mode-locked dual-wavelength square pulse was experimentally observed in a figure-eight erbium-doped fiber laser with ultra-large net-anomalous dispersion. A 2.7 km long single-mode fiber (SMF) was incorporated as a nonlinear optical loop mirror (NOLM) and provided largely nonlinear phase accumulation and anomalous dispersion, which enhanced the four-wave-mixing effect to improve the stability of the dual-wavelength operation. In the NOLM, the long SMF with small birefringence supported the Sagnac interference as a filter to manage the dual-wavelength lasing. The dual-wavelength operation was made switchable by adjusting the intra-cavity polarization loss and phase delay corresponding to two square pulses. When the pump power was increased, the duration of the square pulse increased continuously while the peak pulse power gradually decreased. This square-type pulse can potentially be utilized for signal transmission and sensing.

Orientation-dependent fiber-optic accelerometer based on grating inscription over fiber cladding.

An orientation-sensitive fiber-optic accelerometer based on grating inscription over fiber cladding has been demonstrated. The sensor probe comprises a compact structure in which a short section of thin-core fiber (TCF) stub containing a "cladding" fiber Bragg grating (FBG) is spliced to another single-mode fiber (SMF) without any lateral offset. A femtosecond laser side-illumination technique was utilized to ensure that the grating inscription remains close to the core-cladding interface of the TCF. The core mode and the cladding mode of the TCF are coupled at the core-mismatch junction, and two well-defined resonances in reflection appear from the downstream FBG, in which the cladding resonance exhibits a strong polarization and bending dependence due to the asymmetrical distribution of the cladding FBG along the fiber cross section. Strong orientation dependence of the vibration (acceleration) measurement has been achieved by power detection of the cladding resonance. Meanwhile, the unwanted power fluctuations and temperature perturbations can be referenced out by monitoring the fundamental core resonance.

Experimental observation of different soliton types in a net-normal group-dispersion fiber laser.

Different soliton types are observed in a net-normal group-dispersion fiber laser based on nonlinear polarization rotation for passive mode locking. The proposed laser can deliver a dispersion-managed soliton, typical dissipation solitons, and a quasi-harmonic mode-locked pulse, a soliton bundle, and especially a dark pulse by only appropriately adjusting the linear cavity phase delay bias using one polarization controller at the fixed pump power. These nonlinear waves show different features, including the spectral shapes and time traces. The experimental observations show that the five soliton types could exist in the same laser cavity, which implies that integrable systems, dissipative systems, and dark pulse regimes can transfer and be switched in a passively mode-locked laser. Our studies not only verify the numeral simulation of the different soliton-types formation in a net-normal group-dispersion operation but also provide insight into Ginzburg-Landau equation systems.