Advanced Materials for Energy-Water Systems: The Central Role of Water/Solid Interfaces in Adsorption, Reactivity, and Transport.

The structure, chemistry, and charge of interfaces between materials and aqueous fluids play a central role in determining properties and performance of numerous water systems. Sensors, membranes, sorbents, and heterogeneous catalysts almost uniformly rely on specific interactions between their surfaces and components dissolved or suspended in the water-and often the water molecules themselves-to detect and mitigate contaminants. Deleterious processes in these systems such as fouling, scaling (inorganic deposits), and corrosion are also governed by interfacial phenomena. Despite the importance of these interfaces, much remains to be learned about their multiscale interactions. Developing a deeper understanding of the molecular- and mesoscale phenomena at water/solid interfaces will be essential to driving innovation to address grand challenges in supplying sufficient fit-for-purpose water in the future. In this Review, we examine the current state of knowledge surrounding adsorption, reactivity, and transport in several key classes of water/solid interfaces, drawing on a synergistic combination of theory, simulation, and experiments, and provide an outlook for prioritizing strategic research directions.

Covalent Scrambling in Porous Polyarylthioethers through a Stepwise SN Ar for Tunable Bandgap and Porosity.

Porous poly(aryl thioether)s offer stability and electronic tunability by robust sulfur-aryl conjugated architecture, but synthetic access is hindered due to limited control over the nucleophilic nature of sulfides and the air sensitivity of aromatic thiols. Here, we report a simple, one-pot, inexpensive, regioselective synthesis of highly porous poly(aryl thioether)s through polycondensation of perfluoroaromatic compounds with sodium sulfide. The unprecedented temperature-dependent para-directing formation of thioether linkages leads to a stepwise transition of the polymer extension into a network, thereby allowing fine control of the porosity and optical band gaps. The obtained porous organic polymers with ultra-microporosity (<1 nm) and sulfur as the surface functional groups show size-dependent separation of organic micropollutants and selective removal of mercury ions from water. Our findings offer easy access to poly(aryl thioether)s with accessible sulfur functionalities and higher complexity, which will help in realizing advanced synthetic designs in applications such as adsorption, (photo)catalysis, and (opto)electronics.

Surface Zeta Potential of ALD-Grown Metal-Oxide Films.

Membranes are among the most promising technologies for energy-efficient and highly selective separations, and the surface-charge property of membranes plays a critical role in their broad applications. Atomic layer deposition (ALD) can deposit materials uniformly and with high precision and controllability on arbitrarily complex and large substrates, which renders it a promising method to tune the electrostatics of water/solid interfaces. However, a systematic study of surface-charge properties of ALD-grown films in aqueous environments is still lacking. In this work, 17 ALD-grown metal-oxide films are synthesized, and a comprehensive study of their water stability, wetting properties, and surface-charge properties is provided. This work represents a resource guide for researchers and ultimately for materials and process engineers, seeking to tailor interfacial charge properties of membranes and other porous water treatment components.

Sequential Infiltration Synthesis of Silicon Dioxide in Polymers with Ester Groups-Insight from In Situ Infrared Spectroscopy.

New strategies to synthesize nanometer-scale silicon dioxide (SiO2) patterns have drawn much attention in applications such as microelectronic and optoelectronic devices, membranes, and sensors, as we are approaching device dimensions shrinking below 10 nm. In this regard, sequential infiltration synthesis (SIS), a two-step gas-phase molecular assembly process that enables localized inorganic material growth in the targeted reactive domains of polymers, is an attractive process. In this work, we performed in situ Fourier transform infrared spectroscopy (FTIR) measurements during SiO2 SIS to investigate the reaction mechanism of trimethylaluminum (TMA) and tri(tert-pentoxy) silanol (TPS) precursors with polymers having ester functional groups (poly(methyl methacrylate) (PMMA), poly(ethyl methacrylate) (PEMA), polycaprolactone (PCL), and poly(t-butyl methacrylate) (PBMA)), for the purpose of growing patterned nanomaterials. The FTIR results show that for PMMA and PEMA, a lower percentage of functional groups participated in the reactions and formed weak and unstable complexes. In contrast, almost all functional groups in PCL and PBMA participated in the reactions and showed stable and irreversible interactions with TMA. We discovered that the amount of SiO2 formed is not directly correlated with the number of interacting functional groups. These insights into the SiO2 SIS mechanism will enable nanopatterning of SiO2 for low-dimensional applications.

Thiol-Functionalized Adsorbents through Atomic Layer Deposition and Vapor-Phase Silanization for Heavy Metal Ion Removal.

The removal of toxic heavy metal ions from water resources is crucial for environmental protection and public health. In this study, we address this challenge by developing a surface functionalization technique for the selective adsorption of these contaminants. Our approach involves atomic layer deposition (ALD) followed by vapor-phase silanization of porous substrates. We utilized porous silica gel powder (∼100 µm particles, 89 m2/g surface area, ∼30 nm pores) as an initial substrate. This powder was first coated with ∼0.5 nm ALD Al2O3, followed by vapor-phase grafting of a thiol-functional silane. The modified powder, particularly in acidic conditions (pH = 4), showed high selectivity in adsorbing Cd(II), As(V), Pb(II), Hg(II), and Cu(II) heavy metal ions in mixed ion solutions over common benign ions (e.g., Na, K, Ca, and Mg). Langmuir adsorption isotherms and breakthrough adsorption studies were conducted to assess heavy metal binding affinity and revealed the order of Cd(II) < Pb(II) < Cu(II) < As(V) < Hg(II), with a significantly higher affinity for As(V) and Hg(II) ions. Time-dependent uptake studies demonstrated rapid removal of heavy metal ions from aqueous environments, with Hg(II) exhibiting the fastest adsorption kinetics on thiol-modified surfaces. These findings highlight the potential of ALD and vapor-phase silanization to create effective adsorbents for the targeted removal of hazardous contaminants from water.

Development and Characterization of Electrodes for Surface-Specific Attenuated Total Reflection Two-Dimensional Infrared Spectroelectrochemistry.

Electrochemical interfaces still have remaining mysteries surrounding the interfacial region of the electrical double layer, despite being prevalent throughout the energy and water remediation industries. The electrical double layer is where many important dynamic processes such as catalysis and electron transfer occur. The goal of this work is to study the electrical double layer with two-dimensional infrared (2D IR) spectroscopy to experimentally access the details of the structural dynamics of this complex environment. However, there are several experimental challenges to applying 2D IR spectroscopy to this application, such as assuring the surface specificity of the spectrum, optimizing the signal strength while minimizing spectral distortions from dispersion and Fano line shapes, and selecting electrode materials that are both sufficiently IR compatible and conductive. Here we will discuss various considerations when designing 2D IR experiments of electrode interfaces utilizing several substrates and experimental configurations and demonstrate a robust method for 2D IR experiments of electrode interfaces under applied potential that combines nonconducting Si ATR wafers with conductive ITO and thin nanostructured films of plasmonically active Au functionalized with 3-mercapto-2-butanone (MCB). We show that layered electrodes on thin Si ATR wafers with MCB are sensitive to applied potential and that the distortions in the linear and 2D IR spectra are heavily dependent on the morphology of the Au surface.

Vibrational Probe at the Electrochemical Interface: Dependence on Plasmon Coupling and Potential of the Lineshape in Two-Dimensional Infrared Spectroscopy.

Two-dimensional infrared spectroscopy of vibrational probes at an electrode surface shows promise for studying the structural dynamics at an active electrochemical interface. This interface is a complex environment where the solution structures in response to the applied potential. A strategy for achieving the necessary monolayer sensitivity is to use a plasmonically active electrode, which enhances the electromagnetic fields that produce the spectroscopic response. Here, we show how the coupling between the plasmon and the vibrations of the molecular monolayer impacts the FTIR and 2D IR spectroscopy, with an emphasis on the electrochemical potential difference spectra. We show how mixing between the vibrational and plasmonic states gives rise to the distortions that are observed in these measurements. This provides an important step toward 2D IR measurements of vibrational probes at the electrochemical interface as a tool for probing the structural dynamics in the double layer.

Montmorillonite Membranes with Tunable Ion Transport by Controlling Interlayer Spacing.

Membranes incorporating two-dimensional (2D) materials have shown great potential for water purification and energy storage and conversion applications. Their ordered interlayer galleries can be modified for their tunable chemical and structural properties. Montmorillonite (MMT) is an earth-abundant phyllosilicate mineral that can be exfoliated into 2D flakes and reassembled into membranes. However, the poor water stability and random interlayer spacing of MMT caused by weak interlamellar interactions pose challenges for practical membrane applications. Herein, we demonstrate a facile approach to fabricating 2D MMT membranes with alkanediamines as cross-linkers. The incorporation of diamine molecules of different lengths enables controllable interlayer spacing and strengthens interlamellar connections, leading to tunable ion transport properties and boosted membrane stability in aqueous environments.

Asynchronous Double Schiff Base Formation of Pyrazole Porous Polymers for Selective Pd Recovery.

Pyrazole-linked covalent organic polymer is synthesized using an asynchronous double Schiff base from readily available monomers. The one-pot reaction features no metals as a building block or reagent, hence facilitating the structural purity and industrial scalability of the design. Through a single-crystal study on a model compound, the double Schiff base formation is found to follow syn addition, a kinetically favored product, suggesting that reactivity of the amine and carbonyls dictate the order and geometry of the framework building. The highly porous pyrazole polymer COP-214 is chemically resistant in reactive conditions for over two weeks and thermally stable up to 425 °C in air. COP-214 shows well-pronounced gas capture and selectivities, and a high CO2/N2 selectivity of 102. The strongly coordinating pyrazole sites show rapid uptake and quantitative selectivity of Pd (II) over several coordinating metals (especially Pt (II)) at all pH points that are tested, a remarkably rare feature that is best explained by detailed analysis as the size-selective strong coordination of Pd onto pyrazoles. Density functional theory (DFT) calculations show energetically favorable Pd binding between the metal and N-sites of COP-214. The polymer is reusable multiple times without loss of activity, providing great incentives for an industrial prospect.

Covalent Amine Tethering on Ketone Modified Porous Organic Polymers for Enhanced CO2 Capture.

Effective removal of excess greenhouse gas CO2 necessitates new adsorbents that can overcome the shortcomings of the current capture methods. To achieve that, porous materials are often modified post-synthetically with reactive amine functionalities but suffer from significant surface area losses. Herein, we report a successful amine post-functionalization of a highly porous covalent organic polymer, COP-130, without losing much porosity. By varying the amine substituents, we recorded a remarkable increase in CO2 uptake and selectivity. Ketone functionality, a rarely accessible functional group for porous polymers, was inserted prior to amination and led to covalent tethering of amines. Interestingly, aminated polymers demonstrated relatively low heats of adsorption, which is useful for the rapid recyclability of materials, due to the formation of suspected intramolecular hydrogen bonding.

Highly transparent Au-coated Ag nanowire transparent electrode with reduction in haze.

Ag nanowire transparent electrode has excellent transmittance and sheet resistance, yet its optical haze still needs to be improved in order for it to be suitable for display applications. Ag nanowires are known to have high haze because of the geometry of the nanowire and the high light scattering characteristic of the Ag. In this study, a Au-coated Ag nanowire structure was proposed to reduce the haze, where a thin layer of Au was coated on the surface of the Ag nanowires using a mild [Au(en)2]Cl3 galvanic displacement reaction. The mild galvanic exchange allowed for a thin layer of Au coating on the Ag nanowires with minimal truncation of the nanowire, where the average length and the diameter were 13.0 µm and 60 nm, respectively. The Au-coated Ag nanowires were suspended in methanol and then electrostatically sprayed on a flexible polycarbonate substrate that revealed a clear reduction in haze with a 2-4% increase in total transmittance, sheet resistance ranges of 80-90%, and 8.8-36.8 Ohm/sq. Finite difference time domain simulations were conducted for Au-coated Ag nanowires that indicated a significant reduction in the average scattering from 1 to 0.69 for Au layer thicknesses of 0-10 nm.