Intrahelical Interactions in an α-Helical Coiled Coil Determine the Structural Stability of Tropomyosin.

Tropomyosin (Tpm) is a two-stranded parallel α-helical coiled-coil protein, and studying its structure is crucial for understanding the nature of coiled coils. Previously, we found that the N-terminal half of the human skeletal muscle α-Tpm (α-Tpm 140) was less structurally stable in the presence of phosphate ions than the coiled-coil protein carrier (CCPC) 140 variant with 18 mutated residues, in which all amino acid residues located at the interface between the two α-helices were completely conserved. A classical hypothesis explains that interhelical interactions stabilize the coiled-coil structure. In this study, we tested the hypothesis that the structural stability of Tpm and its variant is governed by the binding of multivalent ions that form a bridge between charged side chains located at positions b, c, and f of the heptad repeat on a single α-helical chain. We found that the structural stability of α-Tpm 140 and CCPC 140 markedly increased upon addition of divalent cations and divalent anions, respectively. We also clarified that the structural stability of the α-Tpm 140/CCPC 140 heteromeric coiled-coil molecule was governed by the stability of a less stable α-helical chain. These results demonstrated that the entire structural stability of Tpm is determined by the stability of a single α-helix. Our findings provide new insights into the study of the structure of coiled-coil proteins.

Effect of the Aspect Ratio of Coiled-Coil Protein Carriers on Cellular Uptake.

We showed previously that a rigid and fibrous-structured cationic coiled-coil artificial protein had cell-penetrating activity that was significantly greater when compared with a less-structured cell-penetrating peptide. Nanomaterials with anisotropic structures often show aspect-ratio-dependent unique physicochemical properties, as well as cell-penetrating activities. In this report, we have designed and demonstrated the cell-penetrating activity of a shorter cationic coiled-coil protein. An aspect ratio at 4.5:1 was found to be critical for ensuring that the cationic coiled-coil protein showed strong cell-penetrating activity. At an aspect ratio of 3.5:1, the cationic coiled-coil protein showed cell-penetrating activity that was similar to a less-structured short cationic cell-penetrating peptide. Interestingly, at an aspect ratio of 4:1, the cationic coiled-coil protein exhibited intermediate cell-penetrating activity. These findings should aid in the principle design of intracellular drug delivery carriers including coiled-coil artificial proteins, their derivatives, and α-helical cell-penetrating peptides as well as provide a framework for developing synthetic nanomaterials, such as metal nanorods and synthetic polymers.

Noncationic Rigid and Anisotropic Coiled-Coil Proteins Exhibit Cell-Penetration Activity.

Numerous cationic peptides that penetrate cells have been studied intensively as drug delivery system carriers for cellular delivery. However, cationic molecules tend to be cytotoxic and cause inflammation, and their stability in the blood is usually low. We have previously demonstrated that a rigid and fibrous cationic coiled-coil protein exhibited cell-penetrating ability superior to that of previously reported cell-penetrating peptides. Making use of structural properties, here we describe the cell-penetrating activity of a rigid and fibrous coiled-coil protein with a noncationic surface. A fibrous coiled-coil protein of pI 6.5 penetrated 100% of the cells tested in vitro at a concentration of 500 nM, which is comparable to that of previously reported cell-penetrating peptides. We also investigated the effect of cell-strain dependency and short-term cytotoxicity.

Superior cell penetration by a rigid and anisotropic synthetic protein.

Molecules with structural anisotropy and rigidity, such as asbestos, demonstrate high cell-penetrating activity but also high toxicity. Here we synthesize a biodegradable, rigid, and fibrous artificial protein, CCPC 140, as a potential vehicle for cellular delivery. CCPC 140 penetrated 100% of cells tested in vitro, even at a concentration of 3.1 nM-superior to previously reported cell-penetrating peptides. The effects of cell-strain-dependency and aspect ratio on the cell-penetrating activity of CCPC 140 were also investigated.

Nonvolatile flash memory based on biologically integrated hierarchical nanostructures.

The first six peptides of multifunctional titanium binding peptide-1 bestowed recombinant L-ferritin, minT1-LF, was genetically engineered and used to fabricate multilayered nanoparticle architecture. The multifunctionality of minT1-LF enables specific binding of nanoparticle-accommodated minT1-LF to the silicon substrate surface and wet biochemical fabrication of gate oxide layer by its biomineralization activity. Three-dimensional (3D) nanoparticle architecture with multilayered structure was fabricated by the biological layer-by-layer method and embedded in a metal oxide-semiconductor device structure as a charge storage node of a flash memory device. The 3D-integrated multilayered nanoparticle architecture successfully worked as a charge storage node in flash memory devices that exhibited improved charge storage capacity compared with that of a conventional monolayer structure device.

Self-repairing filamentous actin hydrogel with hierarchical structure.

A chemically cross-linked filamentous actin (F-actin) gel consisting of globular actin (G-actin) as repeating units was prepared. The F-actin gel was cross-linked by covalent bonds, and the main chain is represented by the self-assembly of G-actin with a high-ordered hierarchical structure. The gel exhibited good mechanical performance with a storage modulus >1 kPa and undergoes reversible sol-gel transitions in response to changes in the salt concentration (chemical-induced sol-gel transition) as well as to shear strain (mechanical-induced sol-gel transition). Therefore, the gel exhibits self-repairing ability through dynamic polymerization and depolymerization across the structure hierarchies under repeated shear stress.

Thermoresponsive microtubule hydrogel with high hierarchical structure.

A thermoresponsive 3D microtubule hydrogel (MT gel) was prepared by simultaneous polymerization and chemical cross-linking of tubulins. The main chain of this gel is composed of cross-linked MTs, which consists of a cylindrical assembly of tubulin covalently connected by polyethylene glycol. This gel, which contains 10 mg/mL of tubulin, exhibits a storage modulus G' as high as 1 × 10(3), which is 10 times higher than the loss modulus G'' over a wide range of frequencies. The MT gel exhibits a reversible sol-gel transition by temperature changes at 4-37 °C via depolymerization and polymerization of the MT network. Notable effects of the presence of the cross-linkage on the process of polymerization and depolymerization of tubulin were experimentally observed, and the role of the cross-linkage was discussed.

Autonomous silica encapsulation and sustained release of anticancer protein.

We present a novel method for preparing a silica carrier for the sustained release of a proteinaceous pharmaceutical. This method makes use of the silicification activity of the protein itself, which autonomously formed a protein-silica composite upon simple incubation with a silica precursor. The composite was dissolved, and the encapsulated protein was released into a culture medium, thereby sustaining the protein's activity for a long period of time.

Draft Genome Sequence of Brevibacillusreuszeri Strain NIT02, Isolated from a Laundered Rental Cloth Hot Towel.

Brevibacillus reuszeri is a Gram-positive spore-forming bacterium. Here, we present the draft genome sequence of Brevibacillus reuszeri strain NIT02, which was isolated from a laundered rental cloth hot towel.

Conversion of a monodispersed globular protein into an amyloid-like filament by appending an artificial peptide at the N-terminal.

The soluble, globular, alpha-helix-rich peptide SipA(446-684) is a domain of a bacterial protein that binds to mammalian filamentous-actin and re-arranges the host cell's cytoskeleton. We show that adding two copies of NHBP-1, a carbon nanomaterial binding peptide, to its N-terminal can induce SipA(446-684) to polymerize and assume a fibrillar structure under physiological conditions. The fibrils formed showed thioflavine T and Congo red staining profiles that are characteristic of and specific for amyloid-like structures. The alpha-helical structure of the globular protein was retained in the fibrils, suggesting the appended NHBP-1 sequence plays a key role in the formation of cross-beta spines within the fibrils. Consistent with that idea, we observed that a synthetic NHBP-1 peptide can form an amyloid-like structure under appropriate conditions. Thus, our findings add a new subtype of amyloid-like structure formation and suggest this method of assembly could be exploited in nano-biotechnology.

Interactions between bacterial flagellar axial proteins in their monomeric state in solution.

The axial structure of the bacterial flagellum is composed of many different proteins, such as hook protein and flagellin, and each protein forms a short or long axial segment one after another in a well-defined order along the axis. Under physiological conditions, most of these proteins are stable in the monomeric state in solution, and spontaneous polymerization appears to be suppressed, as demonstrated clearly for flagellin, probably to avoid undesirable self-assembly in the cytoplasmic space. However, no systematic studies of the possible associations between monomeric axial proteins in solution have been carried out. We therefore studied self and cross-association between hook protein, flagellin and three hook-associated proteins, HAP1, HAP2 and HAP3, in all possible pairs, by gel-filtration and analytical centrifugation, and found interactions in the following two cases only. Flagellin facilitated HAP3 aggregation into beta-amyloid-like filaments, but without stable binding between the two. Addition of HAP3 to HAP2 resulted in disassembly of preformed HAP2 decamers and formation of stable HAP2-HAP3 heterodimers. HAP2 missing either of its disordered terminal regions did not form the heterodimer, whereas HAP3 missing either of its disordered terminal regions showed stable heterodimer formation. This polarity in the heterodimer interactions suggests that the interactions between HAP2 and HAP3 in solution are basically the same as those in the flagellar axial structure. We discuss these results in relation to the assembly mechanism of the flagellum.

Mitochondrial localization of cellular prion protein (PrPC) invokes neuronal apoptosis in aged transgenic mice overexpressing PrPC.

Recent studies suggest that the disease isoform of prion protein (PrPSc) is non-neurotoxic in the absence of cellular isoform of prion protein (PrPC), indicating that PrPC may participate directly in the neurodegenerative damage by itself. Meanwhile, transgenic mice harboring a high-copy-number of wild-type mouse (Mo) PrPC develop a spontaneous neurological dysfunction in an age-dependent manner, even without inoculation of PrPSc and thus, investigations of these aged transgenic mice may lead to the understanding how PrPC participate in the neurotoxic property of PrP. Here we demonstrate mitochondria-mediated neuronal apoptosis in aged transgenic mice overexpressing wild-type MoPrPC (Tg(MoPrP)4053/FVB). The aged mice exhibited an aberrant mitochondrial localization of PrPC concomitant with decreased proteasomal activity, while younger littermates did not. Such aberrant mitochondrial localization was accompanied by decreased mitochondrial manganese superoxide dismutase (Mn-SOD) activity, cytochrome c release into the cytosol, caspase-3 activation, and DNA fragmentation, most predominantly in hippocampal neuronal cells. Following cell culture studies confirmed that decrease in the proteasomal activity is fundamental for the PrPC-related, mitochondria-mediated apoptosis. Hence, the neurotoxic property of PrPC could be explained by the mitochondria-mediated neuronal apoptosis, at least in part.

Development of a rapid and simple method for detection of protein contaminants in carmine.

Protein contaminants in carmine can cause dyspnea and anaphylactic reactions in users and consumers of products containing this pigment. The method generally used for detection of proteins in carmine has low reproducibility and is time-consuming. In this study, a rapid, simple, and highly reproducible method was developed for the detection of protein contaminants in carmine. This method incorporates acidic protein denaturation conditions and ultrafiltration. To prevent protein aggregation, sodium dodecyl sulfate containing gel electrophoresis running buffer was used for dispersing the carmine before filtration. An ultrafiltration device was used to separate the protein contaminants from carminic acid in the carmine solution. Two ultrafiltration devices were compared, and a cylindrical device containing a modified polyethersulfone membrane gave the best results. The method had high reproducibility.

Enhancement of protein expression in insect cells by a lobster tropomyosin cDNA leader sequence.

We describe a cis element that dramatically increases the expression levels of exogenous genes in baculovirus-infected insect cells. This 21 bp sequence element is derived from a 5' untranslated leader sequence of a lobster tropomyosin cDNA (L21). By using a transfer vector carrying L21, the expression levels of tropomyosin and luciferase were 20- and seven-fold higher with L21 than without L21, respectively. L21 has both the Kozak sequence and the A-rich sequence found in the polyhedrin leader sequence. We assume that both sequence elements are essential for the enhancement of protein expression in the baculovirus-based expression system.

Ca2+- and S1-induced conformational changes of reconstituted skeletal muscle thin filaments observed by fluorescence energy transfer spectroscopy: structural evidence for three States of thin filament.

Rabbit skeletal muscle alpha-tropomyosin (Tm) and the deletion mutant (D234Tm) in which internal actin-binding pseudo-repeats 2, 3, and 4 are missing [Landis et al. (1997) J. Biol. Chem. 272, 14051-14056] were used to investigate the interaction between actin and tropomyosin or actin and troponin (Tn) by means of fluorescence resonance energy transfer (FRET). FRET between Cys-190 of D234Tm and Gln-41 or Cys-374 of actin did not cause any significant Ca2+-induced movement of D234Tm, as reported previously for native Tm [Miki et al. (1998) J. Biochem. 123, 1104-1111]. FRET did not show any significant S1-induced movement of Tm and D234Tm on thin filaments either. The distances between Cys-133 of TnI, and Gln-41 and Cys-374 of actin on thin filaments reconstituted with D234Tm (mutant thin filaments) were almost the same as those on thin filaments with native Tm (wild-type thin filaments) in the absence of Ca2+. Upon binding of Ca2+ to TnC, these distances on mutant thin filaments increased by approximately 10 A in the same way as on wild-type thin filaments, which corresponds to a Ca2+-induced conformational change of thin filaments [Miki et al. (1998) J. Biochem. 123, 324-331]. The rigor binding of myosin subfragment 1 (S1) further increased these distances by approximately 7 A on both wild-type and mutant thin filaments when the thin filaments were fully decorated with S1. This indicates that a further conformational change on thin filaments was induced by S1 rigor-binding (S1-induced or open state). Plots of the extent of S1-induced conformational change vs. molar ratio of S1 to actin showed that the curve for wild-type thin filaments is hyperbolic, whereas that for mutant thin filaments is sigmoidal. This suggests that the transition to the S1-induced state on mutant thin filaments is depressed with a low population of rigor S1. In the absence of Ca2+, the distance also increased on both wild-type and mutant thin filaments close to the level in the presence of Ca2+ as the molar ratio of S1 to actin increased up to 1. The curves are sigmoidal for both wild-type and mutant thin filaments. The addition of ATP completely reversed the changes in FRET induced by rigor S1 binding. For mutant thin filaments, the transition from the closed state to the open state in the presence of ATP is strongly depressed, which results in the inhibition of acto-myosin ATPase even in the presence of Ca2+. The present FRET measurements provide structural evidence for three states of thin filaments (relaxed, Ca2+-induced or closed, and S1-induced or open states) for the regulation mechanism of skeletal muscle contraction.

Fluorescence resonance energy transfer between points on actin and the C-terminal region of tropomyosin in skeletal muscle thin filaments.

Fluorescence resonance energy transfer between points on tropomyosin (positions 87 and 190) and actin (Gln-41, Lys-61, Cys-374, and the ATP-binding site) showed no positional change of tropomyosin relative to actin on the thin filament in response to changes in Ca2+ concentration (Miki et al. (1998) J. Biochem. 123, 1104-1111). This is consistent with recent electron cryo-microscopy analysis, which showed that the C-terminal one-third of tropomyosin shifted significantly towards the outer domain of actin, while the N-terminal half of tropomyosin shifted only a little (Narita et al. (2001) J. Mol. Biol. 308, 241-261). In order to detect any significant positional change of the C-terminal region of tropomyosin relative to actin, we generated mutant tropomyosin molecules with a unique cysteine residue at position 237, 245, 247, or 252 in the C-terminal region. The energy donor probe was attached to these positions on tropomyosin and the acceptor probe was attached to Cys-374 or Gln-41 of actin. These probe-labeled mutant tropomyosin molecules retain the ability to regulate the acto-S1 ATPase activity in conjunction with troponin and Ca2+. Fluorescence resonance energy transfer between these points of tropomyosin and actin showed a high transfer efficiency, which should be very sensitive to changes in distance between probes attached to actin and tropomyosin. However, the transfer efficiency did not change appreciably upon removal of Ca2+ ions, suggesting that the C-terminal region of tropomyosin did not shift significantly relative to actin on the reconstituted thin filament in response to the change of Ca2+ concentration.

Simultaneous capillary electrophoretic separation and detection of P(V) and As(V) As heteropoly-blue complexes.

A capillary electrophoretic (CE) method was developed for the simultaneous determination of P(V) and As(V). A Mo(VI)-ascorbic acid reagent reacted with a mixture of trace amounts of P(V) and As(V) to form the corresponding heteropoly-blue complexes in 0.05 M acetate buffer (pH 3.5). When 0.05 M malonate buffer was used as a migration buffer, the peaks due to their migrations were well separated in the electropherogram, and the pre-column complex-formation reaction was applied to the simultaneous CE determination of P(V) and As(V) with direct UV detection at 220 nm. With the proposed method, the calibration curves were linear in the concentration range of 5 x 10(-7) - 1 x 10(-4) M, with a detection limit of 1 x 10(-7) M (a signal-to-noise ratio of 3). Interference from foreign ions was also discussed.

Hydrophilic Double-Network Polymers that Sustain High Mechanical Modulus under 80% Humidity.

The effects of water on the mechanical properties of synthetic hydrophilic polymers with double-network (DN) structures were studied under different relative humidities (RH). It was found that they could sustain nearly the same high Young's modulus as dry DN polymers in the RH range 10-80% (water content 3-17 wt %), that is, more than 102 MPa. However, when the RH exceeds 80%, DN polymers abruptly absorb large amounts of water (water content 90 wt %) and transform to a highly water-swollen "gel state" with a decrease in the Young's modulus of 3 orders of magnitude. Spectroscopic analyses revealed that water molecules below RH 80% are strongly bound to hydrophilic moieties with highly restricted mobility; water under such states improves rather than reduces mechanical properties by behaving as a plasticizer. DN polymers capable of sustaining high mechanical properties, even under RH 80%, have potential uses as hydrophilic materials.