Redox: Organic Robust Radicals and Their Polymers for Energy Conversion/Storage Devices.

Persistent radicals can hold their unpaired electrons even under conditions where they accumulate, leading to the unique characteristics of radical ensembles with open-shell structures and their molecular properties, such as magneticity, radical trapping, catalysis, charge storage, and electrical conductivity. The molecules also display fast, reversible redox reactions, which have attracted particular attention for energy conversion and storage devices. This paper reviews the electrochemical aspects of persistent radicals and the corresponding macromolecules, radical polymers. Radical structures and their redox reactions are introduced, focusing on redox potentials, bistability, and kinetic constants for electrode reactions and electron self-exchange reactions. Unique charge transport and storage properties are also observed with the accumulated form of redox sites in radical polymers. The radical molecules have potential electrochemical applications, including in rechargeable batteries, redox flow cells, photovoltaics, diodes, and transistors, and in catalysts, which are reviewed in the last part of this paper.

Core-Shell Double Gyroids Directed by Selective Solvation for ABC Triblock Terpolymers.

The formation of ABC triblock terpolymers through solution casting is still challenging. In this study, core-shell double gyroid network structures are fabricated via solution casting using poly(2,2,2-trifluoroethyl methacrylate) (PTFEMA) (F)-b-[poly(4-vinylpyridine) (P4VP) (P)]-b-[polystyrene (PS) (S)] (FPS) triblock terpolymers in N,N-dimethylformamide (DMF). Upon heat treatment, the polymer tends to form a sphere-in-lamellar structure at the F/S interface. Given the solubility properties of each component in DMF, it is anticipated that the effective volume fraction of F relative to P would increase in concentrated solutions and the effective volume fraction of S would decrease. The microphase-separated structure derived from the DMF solution consistently results in the formation of a network structure composed of a core-shell double gyroid, with F as the matrix, P as the shell, and S as the core, and their periodic lengths gradually increase to 110.8, 131.8, and 162.7 nm as increase molecular weights of PS blocks to 13.8, 20.7, and 28.8 kg mol-1. Based on the solubility properties of the polymer components highlighted in this study, the solvent selection strategy is broadly applicable to ABC triblock terpolymers featuring various polymer components, offering a more efficient avenue for fabricating core-shell double gyroid structures.

Automated Design of Li+ -Conducting Polymer by Quantum-Inspired Annealing.

Automated molecule design by computers is an essential topic in materials informatics. Still, generating practical structures is not easy because of the difficulty in treating material stability, synthetic difficulty, mechanical properties, and other miscellaneous parameters, often leading to the generation of junk molecules. The problem is tackled by introducing supervised/unsupervised machine learning and quantum-inspired annealing. This autonomous molecular design system can help experimental researchers discover practical materials more efficiently. Like the human design process, new molecules are explored based on knowledge of existing compounds. A new solid-state polymer electrolyte for lithium-ion batteries is designed and synthesized, giving a promising room temperature conductivity of 10-5 S cm-1 with reasonable thermal, chemical, and mechanical properties.

A PROXYL-Type Norbornene Polymer for High-Voltage Cathodes in Lithium Batteries.

A newly designed radical polymer with a polynorbornene backbone and unsaturated derivative of tetramethylpyrrolidine 1-oxyl (PROXYL) as pendant groups displays reversible redox at 3.75 V (vs Li/Li+ ). The robust polymer design enables the high voltage while maintaining a promising cyclability (over 1000 cycles). The polymer is also beneficial as an additive to the regular lithium iron phosphate electrodes, where the quickly responding organic material facilitates the charging reactions catalytically.

TEMPO-Substituted Poly(ethylene sulfide) for Solid-State Electro-Chemical Charge Storage.

A poly(ethylene sulfide) backbone is introduced as the main chain of a radical polymer. Anionic ring-opening polymerization of an episulfide monomer substituted with 2,2,6,6tetramethylpiperidin1oxyl (TEMPO), a robust nitroxide radical, yields the corresponding polythioether. Compared to the traditional poly(ethylene oxide) backbone, the new polymer shows a lower glass transition temperature (-10 °C), and about threefold higher solid-state ionic conductivity. The polythioether is also shown to improve the charge/discharge properties of a cathode in solid-state lithium-ion batteries.

Electrochemical characterization and thermodynamic analysis of TEMPO derivatives in ionic liquids.

In this study we investigate the reversibility of the reduction process of three TEMPO derivatives - TEMPOL, 4-cyano-TEMPO, and 4-oxo-TEMPO. The [C2mim][BF4] and [C4mpyr][OTf] ionic liquids (ILs) were used to perform cyclic voltammetry (CV) to analyse the redox potentials of the TEMPO derivatives. The former was previously shown to quench the aminoxy anion of TEMPO through a proton transfer reaction with the cation, whereas the latter supported the irreversibility of the TEMPO reduction process. In CV results on TEMPO derivatives, it was shown that [C4mpyr][OTf] could allow for a high degree of reversibility in the reduction of 4-cyano-TEMPO and a moderate degree of reversibility in the reduction of TEMPOL. In comparison, reduction of 4-cyano-TEMPO was predominantly irreversible in [C2mim][BF4], whilst TEMPOL showed complete irreversibility. 4-Oxo-TEMPO did not show any notable reduction reversibility in either IL tested. Reduction potentials showed little variation between the derivatives and 0.2 V variation between the ILs, with the most negative reduction potential being observed at -1.43 V vs. Fc/Fc+ for TEMPOL in [C4mpyr][OTf]. To explain the varying degrees of reversibility of the reduction process, four types of side reactions involving proton transfer to the aminoxy anion were studied using highly correlated quantum chemical methods. Proton transfer from the IL cation was shown to have the ability to quench all three aminoxy anions depending on the IL used. On average, TEMPOL was shown to be the most susceptible to proton transfer from the IL cation, having an average Gibbs free energy (GFE) of 10.5 kJ mol-1 more negative than that of 4-cyano-TEMPO, which was shown to have the highest GFE of proton transfer. Side reactions between water and aminoxy anions were also seen to have the potential to contribute to degradation of the aminoxy anions tested, with 4-oxo-TEMPO being shown to be the most reactive to degradation with water with a GFE of -12.6 kJ mol-1. 4-Oxo-TEMPO was found to be highly susceptible to self-quenching by its aminoxy anion and radical form with highly negative proton transfer GFEs of -47.9 kJ mol-1 and -57.7 kJ mol-1, respectively. Overall, 4-cyano-TEMPO is recommended as being the most stable of the aminoxy anions tested with TEMPOL, thus providing a viable alternative to improve solubility should the IL be tuned to maximize its stability.

AI-Assisted Exploration of Superionic Glass-Type Li+ Conductors with Aromatic Structures.

It has long remained challenging to predict the properties of complex chemical systems, such as polymer-based materials and their composites. We have constructed the largest database of lithium-conducting solid polymer electrolytes (104 entries) and employed a transfer-learned graph neural network to accurately predict their conductivity (mean absolute error of less than 1 on a logarithmic scale). The bias-free prediction by the network helped us to find superionic conductors composed of charge-transfer complexes of aromatic polymers (ionic conductivity of around 10-3 S/cm at room temperature). The glassy design was contrary to the traditional concept of rubbery polymer electrolytes, but it was found to be appropriate to achieve fast, decoupled motion of ionic species from polymer chains and to enhance thermal and mechanical stability. The unbiased suggestions generated by machine learning models can help researches to discover unexpected chemical phenomena, which could also induce a paradigm shift of energy-related functional materials.

Facile Synthesis of Poly(Glycidyl Ether)s with Ionic Pendant Groups by Thiol-Ene Reactions.

Poly(glycidyl ether)s having trifluoromethanesulfonylimide or imidazolium pendant groups are synthesized by thiol-ene reactions. The precise synthesis of a precursor polymer, poly(allyl glycidyl ether), and the following click reactions enable the facile preparation of the polyelectrolytes with the controlled length of main and side chains. The low glass transition temperature (<<0 °C) of the polyethers is beneficial to provide a conductivity as high as 10-6 S cm-1 at room temperature, without compositing any additives. The synthetic approach has advantages of clearly comparing the structural effects of the introduced functional groups and facilely preparing the comprehensive types of polymers.

Ultrathin and Stretchable Rechargeable Devices with Organic Polymer Nanosheets Conformable to Skin Surface.

Ultrathin flexible electronic devices have been attracting substantial attention for biomonitoring, display, wireless communication, and many other ubiquitous applications. In this article, organic robust redox-active polymer/carbon nanotube hybrid nanosheets with thickness of just 100 nm are reported as power sources for ultrathin devices conformable to skin. Regardless of the extreme thinness of the electrodes, a moderately large current density of 0.4 mA cm-2 is achieved due to the high output of the polymers (>10 A g-1 ). For the first time, the use of mechanically robust yet intrinsically soft electrodes and polymer nanosheet sealing leads to the fabrication of rechargeable devices with only 1-µm thickness and even with stretchable properties.

Diffusion-Cooperative Model for Charge Transport by Redox-Active Nonconjugated Polymers.

Charge transport processes in nonconjugated redox-active polymers with electrolytes were studied using a diffusion-cooperative model. For the first time, we quantitatively rationalized that the limited Brownian motion of the redox centers bound to the polymers resulted in the 103-4-fold decline of the bimolecular and heterogeneous charge transfer rate constants, which had been unexplained for half a century. As a next-generation design, a redox-active supramolecular system with high physical mobility was proposed to achieve the rate constant as high as in free solution system (>107 M-1 s-1) and populated site density (>1 mol/L).

Command Surface of Self-Organizing Structures by Radical Polymers with Cooperative Redox Reactivity.

Robust radical-substituted polymers with ideal redox capability were used as "command surfaces" for liquid crystal orientation. The alignment of the smectic liquid crystal electrolytes with low-dimensional ion conduction pathways was reversible and readily switched in response to the redox states of the polymers. In one example, a charge storage device with a cooperative redox effect was fabricated. The bulk ionic conductivity of the cell was significantly decreased only after the electrode was fully charged, due to the anisotropic ionic conductivity of the electrolytes (ratio >103). The switching enabled both a rapid cell response and long charge retention. Such a cooperative command surface of self-assembled structures will give rise to new highly energy efficient supramolecular-based devices including batteries, charge carriers, and actuators.

Cacao bean husk: an applicable bedding material in dairy free-stall barns.

OBJECTIVE: The objectives of the study were to assess the effect of cacao bean husk as bedding material in free-stall barn on the behavior, productivity, and udder health of dairy cattle, and on the ammonia concentrations in the barn. METHODS: Four different stall surfaces (no bedding, cacao bean husk, sawdust, and chopped wheat straw) were each continuously tested for a period of 1 week to determine their effects on nine lactating Holstein cows housed in the free-stall barn with rubber matting. The lying time and the milk yield were measured between d 4 and d 7. Blood samples for plasma cortisol concentration and teat swabs for bacterial counts were obtained prior to morning milking on d 7. The time-averaged gas-phase ammonia concentrations in the barn were measured between d 2 and d 7. RESULTS: The cows spent approximately 2 h more per day lying in the stalls when bedding was available than without bedding. The milk yield increased in the experimental periods when cows had access to bedding materials as compared to the period without bedding. The lying time was positively correlated with the milk yield. Bacterial counts on the teat ends recorded for cows housed on cacao bean husk were significantly lower than those recorded for cows housed without bedding. Ammonia concentration under cacao bean husk bedding decreased by 6%, 15%, and 21% as compared to no bedding, sawdust, and chopped wheat straw, respectively. The cortisol concentration was lowest in the period when cacao bean husk bedding was used. We observed a positive correlation between the ammonia concentrations in the barn and the plasma cortisol concentrations. CONCLUSION: Cacao bean husk is a potential alternative of conventional bedding material, such as sawdust or chopped wheat straw, with beneficial effects on udder health and ammonia concentrations in the barns.

Prediction of Photochromism of Salicylideneaniline Crystals Using a Data Mining Approach.

Salicylideneanilines (SAs) are photochromic compounds that undergo enol-keto photoisomerization in the solid state. Research over the past 60 years has revealed empirically that SAs with steric and planar conformations tend to be photochromic and nonphotochromic, respectively. However, increasing counterexamples in the recent literature raise questions about the nature of the relationship between structure and photochromism in SA crystals and whether the photochromism of SA crystals is predictable. This study is the first to construct a data set on SA crystals and conduct a comprehensive analysis to investigate the relationship between molecular and crystal structures and photochromism. A data mining approach revealed that the dihedral angle is the most dominant structural parameter for photochromism, followed by the Hirshfeld surface volume. SAs with neutral bulky hydrocarbon groups, such as the tert-butyl group, tend to be photochromic because such SAs have steric conformation and a loosely packed structure. In contrast, SAs with fluorine, pyridine, and pyrazine are less likely to be photochromic due to their planar conformation and densely packed structures. The photochromism of the SA crystals in our data set was predicted with high accuracy (>85%) using machine learning. The results of this study provide a useful reference for designing SA crystals with desired photochromic properties.

Chemically tailored block copolymers for highly reliable sub-10-nm patterns by directed self-assembly.

While block copolymer (BCP) lithography is theoretically capable of printing features smaller than 10 nm, developing practical BCPs for this purpose remains challenging. Herein, we report the creation of a chemically tailored, highly reliable, and practically applicable block copolymer and sub-10-nm line patterns by directed self-assembly. Polystyrene-block-[poly(glycidyl methacrylate)-random-poly(methyl methacrylate)] (PS-b-(PGMA-r-PMMA) or PS-b-PGM), which is based on PS-b-PMMA with an appropriate amount of introduced PGMA (10-33 mol%) is quantitatively post-functionalized with thiols. The use of 2,2,2-trifluoroethanethiol leads to polymers (PS-b-PGFMs) with Flory-Huggins interaction parameters (χ) that are 3.5-4.6-times higher than that of PS-b-PMMA and well-defined higher-order structures with domain spacings of less than 20 nm. This study leads to the smallest perpendicular lamellar domain size of 12.3 nm. Furthermore, thin-film lamellar domain alignment and vertical orientation are highly reliably and reproducibly obtained by directed self-assembly to yield line patterns that correspond to a 7.6 nm half-pitch size.

Thianthrene polymers as 4 V-class organic mediators for redox targeting reaction with LiMn2O4 in flow batteries.

Redox targeting reaction is an emerging idea for boosting the energy density of redox-flow batteries: mobile redox mediators transport electrical charges in the cells, whereas large-density electrode-active materials are fixed in tanks. This study reports 4 V-class organic polymer mediators using thianthrene derivatives as redox units. The higher potentials than conventional organic mediators (up to 3.8 V) enable charging LiMn2O4 as an inorganic cathode offering a large theoretical volumetric capacity of 500 Ah/L. Soluble or nanoparticle polymer design is beneficial for suppressing crossover reactions (ca. 3% after 300 h), simultaneously contributing to mediation reactions. The successful mediation cycles observed by repeated charging/discharging steps indicate the future capability of designing particle-based redox targeting systems with porous separators, benefiting from higher energy density and lower cost.

Extracting higher-conductivity designs for solid polymer electrolytes by quantum-inspired annealing.

Data-driven optimal structure exploration has become a hot topic in materials for energy-related devices. However, this method is still challenging due to the insufficient prediction accuracy of material properties and large exploration space for candidate structures. We propose a data trend analysis system for materials using quantum-inspired annealing. Structure-property relationships are learned by a hybrid decision tree and quadratic regression algorithm. Then, ideal solutions to maximize the property are explored by a Fujitsu Digital Annealer, which is unique hardware that can quickly extract promising solutions from the ample search space. The system's validity is investigated with an experimental study examining solid polymer electrolytes as potential components for solid-state lithium-ion batteries. A new trithiocarbonate polymer electrolyte offers a conductivity of 10-6 S cm-1 at room temperature, even though it is in a glassy state. Molecular design through data science will enable accelerated exploration of functional materials for energy-related devices.

Administration of insulin to newly hatched chicks improves growth performance via impairment of MyoD gene expression and enhancement of cell proliferation in chicken myoblasts.

The insulin/PI3K/Akt signaling pathway is strongly involved in the differentiation of C2C12 cells, as has been demonstrated by the addition of IGFs and insulin to culture media. In this study, we have characterized the role of insulin in chick myoblast proliferation and differentiation in vitro and in vivo, and have revealed novel details of how this exogenous hormone influences myogenic genes during differentiation. Chick myoblast cells cultured in differentiation medium (DMEM containing 2% FBS) supplemented with insulin exhibited a significant decrease in MyoD and myogenin mRNA expression after 12h of culture compared to cells cultured in differentiation media alone. MyoD and myogenin immunoreactive proteins in cells cultured in differentiation medium supplemented with insulin were quite low compared to those in control culture. Supplementation of the differentiation media containing insulin with LY294002 (a PI3K inhibitor) induced myoblast differentiation. A significant increase in MyoD and myogenin mRNA expression was observed in these cells after incubation for 12h, and the level of expression was similar to that of control cells incubated with differentiation media alone. The DNA content and the phosphor-Erk1/2 protein level were increased by the addition of insulin to the differentiation medium. These results suggest that insulin and its signaling pathway play an inhibitory role in chick myoblast differentiation. A high level of Pax7 mRNA was observed in the skeletal muscle of 3-day-old chicks administered insulin or tolbutamide at 1-day-of-age. In addition, body weight at 21 and 50 days-of-age was significantly greater for chickens administered insulin or tolbutamide at 1-day-of-age than for control chickens. These results detail not only species-specific differences in insulin action for myoblasts but also provide novel information that may be used for the improvement of chicken meat production.

Myeloperoxidase expression in diencephalon is potentially associated with fear-related behavior in chicks of laying hen.

Preventing feather pecking (FP) in adult laying hens is important for the welfare of intensively poultry farming. Fear-related behavior in growing female layer chicks may predict FP in adult hens. In this study, in two representative laying breeds (White Leghorn [WL] and Rhode Island Red [RIR]) that have different FP frequencies, we identified a candidate gene associated with fear-related behavior in chicks and FP in adult hens. In the tonic immobility test and open-field test, the behavioral activity was lower in WL chicks than in RIR chicks (P < 0.01), suggesting that WL chicks were more fearful than RIR chicks. Based on previous studies, 51 genes that have been found to be differentially expressed in the brain between high- and low-FP populations were chosen, and their expression levels were screened in the chick diencephalon. This analysis revealed that myeloperoxidase (MPO) gene expression level was higher in WL chicks than that in RIR chicks (P < 0.05). Furthermore, STRING analysis predicted the gene network including MPO and MPO-related genes and revealed the association of these genes with fear-related behavior. These results suggest that MPO is potentially associated with fear-related behavior in growing female layer chicks and FP in adult hens.

Effect of Dietary 4-Phenylbuthyric Acid Supplementation on Acute Heat-Stress-Induced Hyperthermia in Broiler Chickens.

Hot, humid weather causes heat stress (HS) in broiler chickens, which can lead to high mortality. A recent study found that HS causes endoplasmic reticulum (ER) stress. However, the possible involvement of ER stress in HS-induced physiological alterations in broiler chickens is unclear. This study aimed to evaluate the effect of the dietary supplementation of 4-phenylbutyric acid (4-PBA), an alleviator of ER stress, in acute HS-exposed young broiler chickens. Twenty-eight 14-day-old male broiler chickens (ROSS 308) were divided into two groups and fed either a control diet or a diet containing 4-PBA (5.25 g per kg of diet feed) for 10 days. At 24 days old, each group of chickens was kept in thermoneutral (24 ± 0.5 °C) or acute HS (36 ± 0.5 °C) conditions for 2 h. The results showed that thermoneutral birds supplemented with 4-PBA exhibited no negative effects in terms of broiler body weight gain and tissue weight compared to non-supplemental birds. HS increased body temperature in both the control and 4-PBA groups, but the elevation was significantly lower in the 4-PBA group than in the control group. The plasma non-esterified fatty acid concentration was significantly increased by HS treatment in non-supplemental groups, while the increase was partially attenuated in the 4-PBA group. Moreover, 4-PBA prevented HS-induced gene elevation of the ER stress markers GRP78 and GRP94 in the skeletal muscle. These findings suggest that the 4-PBA effect may be specific to the skeletal muscle in HS-exposed birds and that 4-PBA supplementation attenuated HS-induced muscle ER stress, which could be associated with a supplementation of the body temperature elevation and lipolysis.

Charge-transport kinetics of dissolved redox-active polymers for rational design of flow batteries.

Charge-transport kinetics of redox-active polymers is essential in designing electrochemical devices. We formulate the homogeneous and heterogeneous charge-transfer processes of the redox-active polymers dissolved in electrolytes. The critical electrochemical parameters, the apparent diffusion coefficient of charge transport (D app) and standard electrochemical reaction constant (k 0), are estimated by considering the physical diffusion D phys of polymer chains (D app, k 0 ∝ D phys). The models are validated with previously reported compounds and newly synthesized hydrophilic macromolecules. Solution-type cells are examined to analyze their primary responses from the electrochemical viewpoints.