Secretome of Adipose-Derived Stem Cells Cultured in Platelet Lysate Improves Migration and Viability of Keratinocytes.

Chronic wounds depict a silent epidemic challenging medical professionals worldwide. Regenerative medicine uses adipose-derived stem cells (ADSC) in promising new therapies. In this study, platelet lysate (PL) as a xenogen-free substitute for foetal bovine serum (FBS) in ADSC culture was used to create an ADSC secretome containing cytokines for optimal wound healing conditions. The ADSC secretome was tested on keratinocytes for migrational behaviour and viability. Therefore, human ADSC were characterized under FBS (10%) and PL (5% and 10%) substitution, regarding morphology, differentiation, viability, gene and protein expression. ADSC were then cultured in 5% PL and their secretome was used for stimulation of keratinocyte migration and viability. To enhance the effect, ADSC were treated with Epithelial Growth Factor (EGF, 100 ng/mL) and hypoxia (1% O2). In both PL and FBS groups, ADSC expressed typical stem cell markers. PL induced a significantly higher increase in cell viability compared to FBS substitution. ADSC secretome contained various beneficial proteins which enhance the wound healing capacity of keratinocytes. This could be optimized treating ADSC with hypoxia and EGF. In conclusion, the study shows that ADSC cultivated in 5% PL can effectively support wound healing conditions and can be considered as a promising new therapy for individual treatment of chronic wound disorders.

Size matters-in vitro behaviour of human fibroblasts on textured silicone surfaces with different pore sizes.

Capsular contracture remains a challenge in plastic surgery and represents one of the most common postoperative complications following alloplastic breast reconstruction. The impact of the surface structure of silicone implants on the foreign body reaction and the behaviour of connective tissue-producing cells has already been discussed. The aim of this study was to investigate different pore sizes of silicone surfaces and their influence on human fibroblasts in an in vitro model. Four different textures (no, fine, medium and coarse texture) produced with the salt-loss technique, have been assessed in an in vitro model. Human fibroblasts were seeded onto silicone sheets and evaluated after 1, 4 and 7 days microscopically, with viability assay and gene expression analysis. Comparing the growth behaviour and adhesion of the fibroblasts on the four different textures, a dense cell layer, good adhesion and bridge-building ability of the cells could be observed for the fine and medium texture. Cell number and viability of the cells were increasing during the time course of experiments on every texture. TGFß1 was lowest expressed on the fine and medium texture indicating a trend for decreased fibrotic activity. For silicone surfaces produced with the salt-loss technique, we were able to show an antifibrotic effect of smaller sized pores. These findings underline the hypothesis of a key role of the implant surface and the pore size and pore structure in preventing capsular contracture.

Proangiogenic effects of tumor cells on endothelial progenitor cells vary with tumor type in an in vitro and in vivo rat model.

Endothelial progenitor cells (EPCs) contribute to neovascularization in tumors. However, the relationship of EPCs and tumor-induced angiogenesis still remains to be clarified. The present study aimed at investigating the influence of 4 different tumor types on angiogenic properties of EPCs in an in vitro and in vivo rat model. It could be demonstrated that in vitro proliferation, migration, and angiogenic abilities and genetic modifications of EPCs are controlled in a tumor-type-dependent manner. The proangiogenic effect of mammary carcinoma, osteosarcoma, and rhabdomyosarcoma cells was more pronounced compared to colon carcinoma cells. Coinjection of encapsulated tumor cells, especially mammary carcinoma cells, and EPCs in a rat model confirmed a contributing effect of EPCs in tumor vascularization. Cytokines secreted by tumors such as monocyte chemoattractant protein 1, macrophage inflammatory protein 2, and TNF-related apoptosis-inducing ligand play a pivotal role in the tumor cell-EPC interaction, leading to enhanced migration and angiogenesis. With the present study, we were able to decipher possible underlying mechanisms by which EPCs are stimulated by tumor cells and contribute to tumor vascularization. The present study will contribute to a better understanding of tumor-induced vascularization, thus facilitating the development of therapeutic strategies targeting tumor-EPC interactions.-An, R., Schmid, R., Klausing, A., Robering, J. W., Weber, M., Bäuerle, T., Detsch, R., Boccaccini, A. R., Horch, R. E., Boos, A. M., Weigand, A. Proangiogenic effects of tumor cells on endothelial progenitor cells vary with tumor type in an in vitro and in vivo rat model.

Myogenic differentiation of primary myoblasts and mesenchymal stromal cells under serum-free conditions on PCL-collagen I-nanoscaffolds.

BACKGROUND: The creation of functional skeletal muscle via tissue engineering holds great promise without sacrificing healthy donor tissue. Different cell types have been investigated regarding their myogenic differentiation potential under the influence of various media supplemented with growth factors. Yet, most cell cultures include the use of animal sera, which raises safety concerns and might lead to variances in results. Electrospun nanoscaffolds represent suitable matrices for tissue engineering of skeletal muscle, combining both biocompatibility and stability. We therefore aimed to develop a serum-free myogenic differentiation medium for the co-culture of primary myoblasts (Mb) and mesenchymal stromal cells derived from the bone marrow (BMSC) and adipose tissue (ADSC) on electrospun poly-ε-caprolacton (PCL)-collagen I-nanofibers. RESULTS: Rat Mb were co-cultured with rat BMSC (BMSC/Mb) or ADSC (ADSC/Mb) two-dimensionally (2D) as monolayers or three-dimensionally (3D) on aligned PCL-collagen I-nanofibers. Differentiation media contained either AIM V, AIM V and Ultroser® G, DMEM/Ham's F12 and Ultroser® G, or donor horse serum (DHS) as a conventional differentiation medium. In 2D co-culture groups, highest upregulation of myogenic markers could be induced by serum-free medium containing DMEM/Ham's F12 and Ultroser® G (group 3) after 7 days. Alpha actinin skeletal muscle 2 (ACTN2) was upregulated 3.3-fold for ADSC/Mb and 1.7-fold for BMSC/Mb after myogenic induction by group 3 serum-free medium when compared to stimulation with DHS. Myogenin (MYOG) was upregulated 5.2-fold in ADSC/Mb and 2.1-fold in BMSC/Mb. On PCL-collagen I-nanoscaffolds, ADSC showed a higher cell viability compared to BMSC in co-culture with Mb. Myosin heavy chain 2, ACTN2, and MYOG as late myogenic markers, showed higher gene expression after long term stimulation with DHS compared to serum-free stimulation, especially in BMSC/Mb co-cultures. Immunocytochemical staining with myosin heavy chain verified the presence of a contractile apparatus under both serum free and standard differentiation conditions. CONCLUSIONS: In this study, we were able to myogenically differentiate mesenchymal stromal cells with myoblasts on PCL-collagen I-nanoscaffolds in a serum-free medium. Our results show that this setting can be used for skeletal muscle tissue engineering, applicable to future clinical applications since no xenogenous substances were used.

ADSCs and adipocytes are the main producers in the autotaxin-lysophosphatidic acid axis of breast cancer and healthy mammary tissue in vitro.

BACKGROUND: Breast cancer is the most common malignancy in women affecting one out of eight females throughout their lives. Autotaxin (ATX) is upregulated in breast cancer which results in increased lysophosphatidic acid (LPA) formation within the tumor. This study's aim was to identify the role of different mammary cell populations within the ATX-LPA axis. METHODS: Epithelial-cell-adhesion-molecule-positive (EpCAM) and -negative cells from breast tumors, adipose-derived stem cells (ADSCs) of tumor-adjacent and tumor-distant mammary fat were isolated and compared to healthy ADSCs, mammary epithelial cells (HMECs), and mesenchymal cells (MES) of healthy mammary tissue (n = 4 each) and further to well-established breast (cancer) cell lines. RESULTS: mRNA expression analyses revealed that ADSCs and MES largely expressed LPA receptor 1 (LPAR1) while epithelial cells mainly expressed LPAR6. LPA 18:1 activated all the cell populations and cell lines by rise in cytosolic free calcium concentrations. MES and ADSCs expressed ATX whereas epithelial cells did not. ADSCs revealed the highest expression in ATX with a significant decline after adipogenic differentiation in healthy ADSCs, whereas ATX expression increased in ADSCs from tumor patients. Breast (cancer) cell lines did not express ATX. Transmigration of MES was stimulated by LPA whereas an inhibitory effect was observed in epithelial cells with no differences between tumors and healthy cells. Triple-negative breast cancer (TNBC) cell lines were also stimulated and the transmigration partly inhibited using the LPA receptor antagonist Ki16425. CONCLUSIONS: We here show that each mammary cell population plays a different role in the ATX-LPA axis with ADSCs and adipocytes being the main source of ATX in tumor patients in our experimental setting. Inhibitors of this axis may therefore present a valuable target for pharmacological therapies.

A vascularized in vivo melanoma model suitable for metastasis research of different tumor stages using fundamentally different bioinks.

Although 2D cancer models have been the standard for drug development, they don't resemble in vivo properties adequately. 3D models can potentially overcome this. Bioprinting is a promising technique for more refined models to investigate central processes in tumor development such as proliferation, dormancy or metastasis. We aimed to analyze bioinks, which could mimic these different tumor stages in a cast vascularized arteriovenous loop melanoma model in vivo. It has the advantage to be a closed system with a defined microenvironment, supplied only with one vessel-ideal for metastasis research. Tested bioinks showed significant differences in composition, printability, stiffness and microscopic pore structure, which led to different tumor stages (Matrigel and Alg/HA/Gel for progression, Cellink Bioink for dormancy) and resulted in different primary tumor growth (Matrigel significantly higher than Cellink Bioink). Light-sheet fluorescence microscopy revealed differences in vascularization and hemorrhages with no additional vessels found in Cellink Bioink. Histologically, typical human melanoma with different stages was demonstrated. HMB-45-positive tumors in progression inks were infiltrated by macrophages (CD163), highly proliferative (Ki67) and metastatic (MITF/BRN2, ATX, MMP3). Stainings of lymph nodes revealed metastases even without significant primary tumor growth in Cellink Bioink. This model can be used to study tumor pathology and metastasis of different tumor stages and therapies.

Characterization of two different alginate-based bioinks and the influence of melanoma growth within.

Extrusion-based bioprinting is an established method in biofabrication. Suitable bioinks have fundamentally different compositions and characteristics, which should be examined, in order to find a perfect model system. Here, we investigate the effect of two alginate-based, yet unalike 3D-printed bioinks, pre-crosslinked alginate-dialdehyde gelatin (ADA-GEL) and a mixture of alginate, hyaluronic acid, and gelatin (Alg/HA/Gel), on the melanoma cell line Mel Im and vice versa in terms of stiffness, shrinkage, cellular behavior and colony formation over 15 days. Rheological stiffness measurements revealed two soft gels with similar storage moduli. The cells did not have a significant impact on the overall stiffness, whereas ADA-GEL (2.5/2.5%) was significantly stiffer than Alg/HA/Gel (0.5/0.1/3%). Regarding the shrinkage of printed constructs, cells had a significant influence, especially in ADA-GEL, which has covalent bonds between the oxidized alginate and gelatin. Multi-photon microscopy exhibited proliferation, cell spreading and migration in ADA-GEL with cell-cell and cell-matrix interaction, dissimilarly to Alg/HA/Gel, in which cells formed spherical, encapsulated colonies. Scanning electron microscopy and histology showed degradation and multi-layered growth on ADA-GEL and fewer examples of escaped cells on Alg/HA/Gel. Both gels serve as proliferation bioink for melanoma with more necrosis in deeper Alg/HA/Gel colonies and differences in spreading and matrix interaction. These findings show the importance of proper characterization of the bioinks for different applications.

Perspectives on the Current State of Bioprinted Skin Substitutes for Wound Healing.

Human skin is particularly vulnerable to external damaging influences such as irradiation, extreme temperatures, chemical trauma, and certain systemic diseases, which reduce the skin's capacity for regeneration and restoration and can possibly lead to large-scale skin defects. To restore skin continuity in severe cases, surgical interventions such as the transplantation of autologous tissue are needed. Nevertheless, the coverage of larger skin defects caused by severe third-grade burns or extensive irradiation therapy is limited due to the depletion of uninjured autologous tissue. In such cases, many of the patient's epidermal cells can become available using biofabricated skin grafts, thereby restoring the skin's vital functions. Given the limited availability of autologous skin grafts for restoring integrity in large-scale defects, using bioprinted constructs as skin graft substitutes could offer an encouraging therapeutic alternative to conventional therapies for large-scale wounds, such as the transplantation of autologous tissue. Using layer-by-layer aggregation or volumetric bioprinting, inkjet bioprinting, laser-assisted bioprinting, or extrusion-based bioprinting, skin cells are deposited in a desired pattern. The resulting constructs may be used as skin graft substitutes to accelerate wound healing and reconstitute the physiological functions of the skin. In this review, we aimed to elucidate the current state of bioprinting within the context of skin tissue engineering and introduce and discuss different bioprinting techniques, possible approaches and materials, commonly used cell types, and strategies for graft vascularization for the production of bioprinted constructs for use as skin graft substitutes.

Comparison of the Behavior of 3D-Printed Endothelial Cells in Different Bioinks.

Biomaterials with characteristics similar to extracellular matrix and with suitable bioprinting properties are essential for vascular tissue engineering. In search for suitable biomaterials, this study investigated the three hydrogels alginate/hyaluronic acid/gelatin (Alg/HA/Gel), pre-crosslinked alginate di-aldehyde with gelatin (ADA-GEL), and gelatin methacryloyl (GelMA) with respect to their mechanical properties and to the survival, migration, and proliferation of human umbilical vein endothelial cells (HUVECs). In addition, the behavior of HUVECs was compared with their behavior in Matrigel. For this purpose, HUVECs were mixed with the inks both as single cells and as cell spheroids and printed using extrusion-based bioprinting. Good printability with shape fidelity was determined for all inks. The rheological measurements demonstrated the gelling consistency of the inks and shear-thinning behavior. Different Young's moduli of the hydrogels were determined. However, all measured values where within the range defined in the literature, leading to migration and sprouting, as well as reconciling migration with adhesion. Cell survival and proliferation in ADA-GEL and GelMA hydrogels were demonstrated for 14 days. In the Alg/HA/Gel bioink, cell death occurred within 7 days for single cells. Sprouting and migration of the HUVEC spheroids were observed in ADA-GEL and GelMA. Similar behavior of the spheroids was seen in Matrigel. In contrast, the spheroids in the Alg/HA/Gel ink died over the time studied. It has been shown that Alg/HA/Gel does not provide a good environment for long-term survival of HUVECs. In conclusion, ADA-GEL and GelMA are promising inks for vascular tissue engineering.

Air-Pressure-Supported Application of Cultured Human Keratinocytes in a Fibrin Sealant Suspension as a Potential Clinical Tool for Large-Scale Wounds.

The treatment of large-scale skin wounds remains a therapeutic challenge. In most cases there is not enough autologous material available for full coverage. Cultured epithelial autografts are efficient in restoring the lost epidermal cover; however, they have some disadvantages, such as difficult application and protracted cell cultivation periods. Transplanting a sprayed keratinocyte suspension in fibrin sealant as biological carrier is an option to overcome those disadvantages. Here, we studied different seeding techniques regarding their applicability and advantages on cell survival, attachment, and outgrowth in vitro and thereby improve the cell transfer to the wound bed. Human primary keratinocytes were suspended in a fibrin sealant. WST-8 assay was used to evaluate the vitality for 7 days. Furthermore, the cells were labeled with CellTracker™ CM-Di-I and stained with a life/dead staining. Cell morphology, shape, and distribution were microscopically analyzed. There was a significant increase in vitality while cultivating the cells in fibrin. Sprayed cells were considerably more homogenously distributed. Sprayed cells reached the confluent state earlier than dripped cells. There was no difference in the vitality and morphology in both groups over the observation period. These findings indicate that the sprayed keratinocytes are superior to the application of the cells as droplets. The sprayed application may offer a promising therapeutic option in the treatment of large chronic wounds.

IGF-I and Hyaluronic Acid Mitigate the Negative Effect of Irradiation on Human Skin Keratinocytes.

Ionizing radiation has become an integral part of modern cancer therapy regimens. Various side effects, such as radiation dermatitis, affect patients in acute and chronic forms and decrease therapy compliance significantly. In this study, primary keratinocytes were irradiated in a 2-dimensional (2D) culture as well as on a 3-dimensional (3D) collagen-elastin matrix with doses of 2 and 5 Gy. The effect of different concentrations of IGF-I, KGF, platelet lysate (PL), high and low molecular weight hyaluronic acid (H-HA, L-HA), and adipose-derived stem cell (ADSC) conditioned medium was analyzed in respect to cell viability (WST-8), wound closure (migration), and the gene expression (quantitative real-time PCR) of 2D cultures. The 3D culture was evaluated by WST-8. A mixture of H-HA and L-HA, as well as IGF-I, could significantly stimulate the keratinocyte viability and migration which were severely reduced by irradiation. The MKI67and IL6 gene expression of irradiated keratinocytes was significantly higher after H-HA/L-HA treatment. The stimulating effects of H-HA/L-HA and IGF-I were able to be confirmed in 3D culture. A positive influence on cell viability, migration, and gene expression was achieved after the treatment with H-L-HA and IGF-I. These results open the possibility of a novel therapeutic method for both the prevention and the treatment of radiation dermatitis.

An In Vitro Approach for Investigating the Safety of Lipotransfer after Breast-Conserving Therapy.

The application of lipotransfer after breast-conserving therapy (BCT) and irradiation in breast cancer patients is an already widespread procedure for reconstructing volume deficits of the diseased breast. Nevertheless, the safety of lipotransfer has still not been clarified yet due to contradictory data. The goal of this in vitro study was to further elucidate the potential effects of lipotransfer on the irradiated remaining breast tissue. The mammary epithelial cell line MCF-10A was co-cultured with the fibroblast cell line MRC-5 and irradiated with 2 and 5 Gy. Afterwards, cells were treated with conditioned medium (CM) from adipose-derived stem cells (ADSC), and the effects on the cellular functions of MCF-10A cells and on gene expression at the mRNA level in MCF-10A and MRC-5 cells were analyzed. Treatment with ADSC CM stimulated transmigration and invasion and decreased the surviving fraction of MCF-10A cells. Further, the expression of cytokines, extracellular, and mesenchymal markers was enhanced in mammary epithelial cells. Only an effect of ADSC CM on irradiated fibroblasts could be observed. The present data suggest epithelial-mesenchymal transition-like changes in the epithelial mammary breast cell line. Thus, the benefits of lipotransfer after BCT should be critically weighed against its possible risks for the affected patients.

Influence of the autotaxin-lysophosphatidic acid axis on cellular function and cytokine expression in different breast cancer cell lines.

Previous studies provide high evidence that autotaxin (ATX)-lysophosphatidic acid (LPA) signaling through LPA receptors (LPAR) plays an important role in breast cancer initiation, progression, and invasion. However, its specific role in different breast cancer cell lines remains to be fully elucidated to offer improvements in targeted therapies. Within this study, we analyzed in vitro the effect of LPA 18:1 and the LPAR1, LPAR3 (and LPAR2) inhibitor Ki16425 on cellular functions of different human breast cancer cell lines (MDA-MB-231, MDA-MB-468, MCF-7, BT-474, SKBR-3) and the human breast epithelial cell line MCF-10A, as well as Interleukin 8 (IL-8), Interleukin 6 (IL-6) and tumor necrosis factor (TNF)-alpha cytokine secretion after LPA-incubation. ATX-LPA signaling showed a dose-dependent stimulatory effect especially on cellular functions of triple-negative and luminal A breast cancer cell lines. Ki16425 inhibited the LPA-induced stimulation of triple-negative breast cancer and luminal A cell lines in variable intensity depending on the functional assay, indicating the interplay of different LPAR in those assays. IL-8, IL-6 and TNF-alpha secretion was induced by LPA in MDA-MB-468 cells. This study provides further evidence about the role of the ATX-LPA axis in different breast cancer cell lines and might contribute to identify subtypes suitable for a future targeted therapy of the ATX-LPA axis.

Molecular Changes Induced in Melanoma by Cell Culturing in 3D Alginate Hydrogels.

Alginate hydrogels have been used as a biomaterial for 3D culturing for several years. Here, gene expression patterns in melanoma cells cultivated in 3D alginate are compared to 2D cultures. It is well-known that 2D cell culture is not resembling the complex in vivo situation well. However, the use of very intricate 3D models does not allow performing high-throughput screening and analysis is highly complex. 3D cell culture strategies in hydrogels will better mimic the in vivo situation while they maintain feasibility for large-scale analysis. As alginate is an easy-to-use material and due to its favorable properties, it is commonly applied as a bioink component in the growing field of cell encapsulation and biofabrication. Yet, only a little information about the transcriptome in 3D cultures in hydrogels like alginate is available. In this study, changes in the transcriptome based on RNA-Seq data by cultivating melanoma cells in 3D alginate are analyzed and reveal marked changes compared to cells cultured on usual 2D tissue culture plastic. Deregulated genes represent valuable cues to signaling pathways and molecules affected by the culture method. Using this as a model system for tumor cell plasticity and heterogeneity, EGR1 is determined to play an important role in melanoma progression.

Comparison of Hydrogels for the Development of Well-Defined 3D Cancer Models of Breast Cancer and Melanoma.

Bioprinting offers the opportunity to fabricate precise 3D tumor models to study tumor pathophysiology and progression. However, the choice of the bioink used is important. In this study, cell behavior was studied in three mechanically and biologically different hydrogels (alginate, alginate dialdehyde crosslinked with gelatin (ADA-GEL), and thiol-modified hyaluronan (HA-SH crosslinked with PEGDA)) with cells from breast cancer (MDA-MB-231 and MCF-7) and melanoma (Mel Im and MV3), by analyzing survival, growth, and the amount of metabolically active, living cells via WST-8 labeling. Material characteristics were analyzed by dynamic mechanical analysis. Cell lines revealed significantly increased cell numbers in low-percentage alginate and HA-SH from day 1 to 14, while only Mel Im also revealed an increase in ADA-GEL. MCF-7 showed a preference for 1% alginate. Melanoma cells tended to proliferate better in ADA-GEL and HA-SH than mammary carcinoma cells. In 1% alginate, breast cancer cells showed equally good proliferation compared to melanoma cell lines. A smaller area was colonized in high-percentage alginate-based hydrogels. Moreover, 3% alginate was the stiffest material, and 2.5% ADA-GEL was the softest material. The other hydrogels were in the same range in between. Therefore, cellular responses were not only stiffness-dependent. With 1% alginate and HA-SH, we identified matrices that enable proliferation of all tested tumor cell lines while maintaining expected tumor heterogeneity. By adapting hydrogels, differences could be accentuated. This opens up the possibility of understanding and analyzing tumor heterogeneity by biofabrication.

Tumor Cells Develop Defined Cellular Phenotypes After 3D-Bioprinting in Different Bioinks.

Malignant melanoma is often used as a model tumor for the establishment of novel therapies. It is known that two-dimensional (2D) culture methods are not sufficient to elucidate the various processes during cancer development and progression. Therefore, it is of major interest to establish defined biofabricated three-dimensional (3D) models, which help to decipher complex cellular interactions. To get an impression of their printability and subsequent behavior, we printed fluorescently labeled melanoma cell lines with Matrigel and two different types of commercially available bioinks, without or with modification (RGD (Arginine-Glycine-Aspartate)-sequence/laminin-mixture) for increased cell-matrix communication. In general, we demonstrated the printability of melanoma cells in all tested biomaterials and survival of the printed cells throughout 14 days of cultivation. Melanoma cell lines revealed specific differential behavior in the respective inks. Whereas in Matrigel, the cells were able to spread, proliferate and form dense networks throughout the construct, the cells showed no proliferation at all in alginate-based bioink. In gelatin methacrylate-based bioink, the cells proliferated in clusters. Surprisingly, the modifications of the bioinks with RGD or the laminin blend did not affect the analyzed cellular behavior. Our results underline the importance of precisely adapting extracellular matrices to individual requirements of specific 3D bioprinting applications.

Tumor­type­dependent effects on the angiogenic abilities of endothelial cells in an in vitro rat cell model.

Adequate vascularization is pivotal for tumor progression and metastasis. Tumor angiogenesis is based on a sequence of interactions between the tumor and surrounding cells and the extracellular matrix. It is widely known that a tumor can influence and control its surroundings to create favorable conditions for further growth. To investigate the influence of various tumor types on endothelial cells (ECs), an in vitro rat cell model was used and rat liver EC52 cells were co­cultured with conditioned medium derived from breast cancer MCR86, osteosarcoma ROS­1, colon cancer CC531 and rhabdomyosarcoma R1H cell lines. In a distinct tumor­type­dependent manner, the EC52 cells exhibited changes in their function and gene expression. In all functional cell culture assays (proliferation, migration, transmigration, invasion and tube formation) the breast cancer cells exerted a significant effect on the angiogenic abilities of the ECs. When comparing the various tumor cell types, only the breast and colon cancer cells led to a significant stimulation of the EC migration and invasion. Proliferation, migration, invasion and tube formation were not or only hardly influenced by the osteosarcoma or rhabdomyosarcoma cells. Similarly, the breast and colon cancer cells exhibited the strongest influence on the upregulation of EC angiogenic genes, including the ones encoding vascular endothelial growth factor A, platelet and endothelial cell adhesion molecule 1, fibroblast growth factor 2, Von Willebrand factor, C­X­C motif chemokine ligand 12 and tyrosine kinase with immunoglobulin­like and EGF­like domains 1. Therefore, it is hypothesized that tumor cells enhance the angiogenic properties of ECs, including proliferation, migration, invasion and tube formation in a tumor­type­dependent manner. This is likely based on the upregulation of pro­angiogenic genes in ECs induced by varying cytokine secretion signatures of tumor cells.

Intra- and Postoperative Blood Flow Monitoring in a Sheep Model of Uterus Transplantation.

BACKGROUND: The introduction of the opportunity to transplant a viable uterus into women for fulfilling their desire to have a child has awakened high expectations worldwide. MATERIALS AND METHODS: A sheep model was used to evaluate tools for optimizing measurement of blood flow in uterine transplantation. Intraoperatively, blood flow was measured using unidirectional Doppler and indocyanine green (ICG) fluorescence imaging. Postoperatively, an implantable Doppler probe served as a tool for clinical monitoring the patency of anastomosed vessels. RESULTS: ICG imaging showed complete vascularization of the uterus before and in short-term evaluation after surgery. The implantable Doppler probe proved to be highly suitable for assessing patency of vessels in a non-invasive way. Results of histology, and real-time polymerase chain reaction demonstrated viability of the transplanted uterus. CONCLUSION: Different methods to monitor vasculature patency have proven to be advantageous in supporting both surgeons and researchers in ensuring successful implementation of uterine transplantation.

Plasticity of patient-matched normal mammary epithelial cells is dependent on autologous adipose-derived stem cells.

Due to the increasing clinical application of adipose-derived stem cells (ADSC), e.g. lipotransfer for breast reconstruction, this study aimed to gain novel insights regarding ADSC influence on breast tissue remodeling and determine patient-dependent factors affecting lipotransfer as well as begin to address its oncological risks. The ADSC secretome was analyzed from five normal breast reduction patients and contained elevated levels of growth factors, cytokines and proteins mediating invasion. ADSC/ADSC secretomes were tested for their influence on the function of primary mammary epithelial cells, and tumor epithelial cells using cell culture assays. ADSC/ADSC secretomes significantly stimulated proliferation, transmigration and 3D-invasion of primary normal and tumor epithelial cells. IL-6 significantly induced an EMT and invasion. The ADSC secretome significantly upregulated normal epithelial cell gene expression including MMPs and ECM receptors. Our study supports that ADSC and its secretome promote favorable conditions for normal breast tissue remodeling by changing the microenvironment. and may also be important regarding residual breast cancer cells following surgery.

Bone Tissue Engineering Under Xenogeneic-Free Conditions in a Large Animal Model as a Basis for Early Clinical Applicability.

For decades, researchers have been developing a range of promising strategies in bone tissue engineering with the aim of producing a significant clinical benefit over existing therapies. However, a major problem concerns the traditional use of xenogeneic substances for the expansion of cells, which complicates direct clinical transfer. The study's aim was to establish a totally autologous sheep model as a basis for further preclinical studies and future clinical application. Ovine mesenchymal stromal cells (MSC) were cultivated in different concentrations (0%, 2%, 5%, 10%, and 25%) of either autologous serum (AS) or fetal calf serum (FCS). With an increase of serum concentration, enhanced metabolic activity and proliferation could be observed. There were minor differences between MSC cultivated in AS or FCS, comparing gene and protein expression of osteogenic and stem cell markers, morphology, and osteogenic differentiation. MSC implanted subcutaneously in the sheep model, together with a nanostructured bone substitute, either in stable block or moldable putty form, induced similar vascularization and remodeling of the bone substitute irrespective of cultivation of MSC in AS or FCS and osteogenic differentiation. The bone substitute in block form together with MSC proved particularly advantageous in the induction of ectopic bone formation compared to the cell-free control and putty form. It could be demonstrated that AS is suitable for replacement of FCS for cultivation of ovine MSC for bone tissue engineering purposes. Substantial progress has been made in the development of a strictly xenogeneic-free preclinical animal model to bring future clinical application of bone tissue engineering strategies within reach.