["Fit4You"--A Programme for Prevention and Reduction of Overweight in Apprentices in the Workplace Setting]. / "Fit4U"--ein Präventionsprogramm zur Vermeidung und Verminderung von Übergewicht bei Auszubildenden im Betrieb.

The effect of health promotion at the worksite for overweight adolescents is not known. This 2-year intervention study examined the effect of a multimodal programme including nutrition counselling, sport, and life-skill training on medical and psychological outcomes. The body mass index increased slightly less in the intervention group. Semistructured interviews at the end showed that participants are highly interested in health promotion at the worksite.

Microcalorimetric methods for substrate determination in flow systems with immobilized enzymes.

The enthalpy of processes catalyzed by immobilized enzymes in the reaction cell of a LKB-flow calorimeter is used for determination of urea (0.5-5 mumol) and glucose (0.03-0.5 mumol). Accuracy is 2-5% and the time needed for one analysis is 20 min. A sensitive "enzyme thermistor" consisting of a flow through cell with an immobilized enzyme and two thermistors is described, which permits glucose determinations (0.05-1 mumol +/- 0.03 mumol) by means of temperature difference caused by reaction heat. Coupling of enzyme reactions for increasing reaction heat and consequently sensitivity in calorimetric determinations is demonstrated.

A study of oxygen isotope scrambling in the enzymic and non-enzymic oxidation of linoleic acid.

Lipoxygenases-1 and -2 isolated from soybeans were incubated with linoleic acid in the presence of a mixture of 16O2 and 18O2. The formation of 16O/18O-molecules which is indicative for a head-to head reaction of peroxy radicals was determined and compared with that produced during autoxidation of a linoleic acid emulsion in the presence of ferric ions. Lipoxygenase-1 was much less active in scrambling than lipoxygenase-2 which was comparable to that found in the autoxidation reaction.

Correlations between the 13C Content of Primary and Secondary Plant Products in Different Cell Compartments and That in Decomposing Basidiomycetes.

Relative carbon isotope ratio ([delta]13C values) of primary and secondary products from different compartments of annual plants, pine needles, wood, and decomposing Basidiomycetes have been determined. An enrichment in 13C was found for storage tissues of annual plants, because of the high level of the primary storage products sucrose and starch; however, the enrichment was even greater in leaf starch. All of these compounds had the same relative 13C enrichment in positions 3 and 4 of glucose. Secondary products in conifer needles (lignin, lipids) were depleted in 13C by 1 to 2 [per mille (thousand) sign] relative to carbohydrates from the same origin. Air pollution caused a small decrease in [delta]13C values; however, the relative content of plant products, especially of the soluble polar compounds, was also affected. Decomposing fungi showed a global accumulation of 13C by 4[per mille (thousand) sign] relative to their substrates in wood. Their chitin was enriched by 2[per mille (thousand) sign] relative to the cellulose of the wood. Hence, Basidiomycetes preferentially metabolize "light" molecules, whereas "heavy" molecules are preferentially polymerized. Our results are discussed on the basis of a kinetic isotope effect on the fructose-1,6-bisphosphate aldolase reaction and of metabolic branching on the level of the triose phosphates with varying substrate fluxes.

Electrocatalytic reduction of lipoic acid and electroenzymatic reduction of NAD(P)(+) for integrated dehydrogenase biosensors.

Biosensors for the oxidized substrates of NAD(P)(+)-specific dehydrogenases demand the reductive recycling of the coenzymes. So far, suitable catalysts for the corresponding two-electron transfer are not available. In the present paper, this transport has been realized by a combined electrocatalytical and electroenzymatic process. Lipoic acid has been reduced on graphite electrodes functionalized with Fe(II)-phthalocyanine in 95% yield at-1200 mV in phosphate buffer pH 7.0. With the electrocatalytically reduced product, dihydrolipoic acid, lipoamide dehydrogenase could reduce NAD(+) in 20% yield and thioredoxin reductase NADP(+) in 18.4% yield. So far, the combined electrocatalytic/electroenzymatic system has not yet been realized, mainly because at the potential needed for the lipoic acid reduction, a parallel one-electron reduction of NAD(P)(+) was observed, implying the dimerization of the coenzyme.

Application of fuzzy logic in multicomponent analysis by optodes.

Fuzzy logic can be a useful tool for the determination of substrate concentrations applying optode arrays in combination with flow injection analysis, UV-VIS spectroscopy and kinetics. The transient diffuse reflectance spectra in the visible wavelength region from four optodes were evaluated to carry out the simultaneous determination of artificial mixtures of ampicillin and penicillin. The discrimination of the samples was achieved by changing the composition of the receptor gel and working pH. Different algorithms of pre-processing were applied on the data to reduce the spectral information to a few analytic-specific variables. These variables were used to develop the fuzzy model. After calibration the model was validated by an independent test data set.

Bioelectronic noses: a status report. Part II.

The present state of the art to record or to mimic electronically the human senses of olfaction and taste is characterized. In this part II, strategies are outlined to utilize chemical and biological structures with their different complexities which serve as sensor elements in (bio-) electronic noses. Finally a survey is given on the computer-science aspects of odor recognition based on these elements.

Prerequisites for the on-line control of microbial processes by flow injection analysis.

Problems associated with the use of biosensors in process control, e.g. difficulties of sterilization and sensor fouling, are shortly displayed, and possibilities to overcome them are outlined. The advantages of flow injection analysis (FIA) are demonstrated and examples for efficient sampling systems connected with this method are reviewed. Special emphasis is given to problem-orientated sample pretreatments, preventing fast inactivation of immobilized enzymes in the analysis system. Examples of problem-orientated sample pretreatment units are given. A proposal for a computer-controlled self-calibrating FIA system is given.

18O pattern and biosynthesis of natural plant products.

Oxygen atoms in plant products originate from CO(2), H(2)O and O(2), precursors with quite different delta18O values. Furthermore their incorporation by different reactions implies isotope effects. On this base the resulting non-statistical 18O distributions in natural compounds are discussed. The delta18O value of cellulose is correlated to that of the leaf water, and the observed 18O enrichment (approximately +27 per thousand) is generally attributed to an equilibrium isotope effect between carbonyl groups and water. However, as soluble and heterotrophically synthesised carbohydrates show other correlations, a non-statistical 18O distribution - originating from individual biosynthetic reactions - is postulated for carbohydrates. Similarly, the delta18O values of organic acids, carbonyl compounds, alcohols and esters indicate water-correlated, but individual 18O abundances (e.g. O from acyl groups approximately +19% above water), depending upon origin and biosyntheses. Alcoholic groups introduced by monooxygenase reactions, e.g. in sterols and phenols, show delta18O values near +5 per thousand, in agreement with an assumed isotope fractionation factor of approximately 1.02 on the reaction with atmospheric oxygen (delta18O=+23.5 per thousand). Correspondingly, a "thermodynamically ordered isotope distribution" is only observed for oxygen in some functional groups correlated to an origin from CO(2) and H(2)O, not from O(2). The individual isotopic increments of functional groups permit the prediction of global delta18O values of natural compounds on the basis of their biosynthesis.

Determination of dehydrogenase substrates by Clark-type oxygen electrodes and photosensitized coenzyme oxidation.

The photosensitized oxidation of NADPH by oxygen can be used for the determination of the reduced coenzymes by means of a Clark oxygen electrode. This method is suitable for coupling to enzyme-catalysed dehydrogenation reactions and thus for the determination of glucose-6-phosphate with glucose-6-phosphate dehydrogenase and of glucose with the combined ATP/hexokinase/glucose-6-phosphate dehydrogenase system, even with the use of immobilized mediators.

Flow-injection analysis systems with immobilized enzymes. Improvement of applicability by integration of coupled reactions, separation steps and background correction.

The specificity of enzymes is often not sufficient to simultaneously determine two parent substrates in a given matrix. Approaches to enhance the selectivity by applying the principle of an array arrangement to flow-injection analysis (FIA) systems based on several immobilized isoenzymes are successful. Immobilized enzymes and detectors in FIA systems often suffer from interferences from impurities of the matrix. Examples are given which prove that this problem can be overcome by an integrated preseparation of the analyte (pervaporation, electrodialysis) or by correction of the matrix signal based on background subtraction using computerized data accumulation and processing.

Metabolite Pools and Metabolic Branching as Factors of in-vivo Isotope Discriminations by Kinetic Isotope Effects.

Abstract Inter- and intra-molecular non-statistical isotope distributions do not only require the existence of a kinetic isotope effect on a defined enzyme catalyzed reaction, but also the prerequisite that this reaction is located at a metabolic branching point. Furthermore a metabolic and isotopic balance demand that the extent of the isotopic shift is reciprocal to the products' yields. On this base the (13)C-enrichment of L-ascorbic acid in position C-1 and the depletion of glycerol in C-1 are interpreted. The (13)C-pattern of natural malic acid is discussed as a consequence of isotope effects on the carboxylation of pyruvate and PEP and on the pyruvate dehydrogenase reaction. The patterns of natural products synthezised by transfer of "active acetaldehyde" is proposed to be due to an isotope effect on the thiamine pyrophosphate containing lyase reaction. An isotope effect on the reduction of "active formaldehyde" to "active methyl" and the existence of corresponding pools is responsible for (13)C-enrichments and depletions of natural products in positions bearing these intermediates. Finally a model for the main nitrogen pools and for isotope discriminations between α-amino, ω-amino-N and amide pools in plants is proposed.

Isotope-geochemical and mineralogical-petrographic characteristics of the pergamon altar marble.

Abstract We report preliminary results of our provenance study of marble from the Telephos Frieze of the Pergamon altar. The emphasis here is on the stable isotope geochemistry of marble. The obtained δ(13)C values (2.4 to 3.5‰) vary insignificantly. However, the δ(18)O values give two clusters. The isotopically light marbles (close to -9.5‰) derive from panels 1-8 and the heavy marbles (-3.5 to -1.0‰) derive from panels 11-50. Mineralogical, petrographic and geochemical investigations (accessory minerals, grain size distribution, rare earth elements) further refined the marble characteristics. In spite of certain differences observed (grain size distributions, isotopy and contents of certain elements) for the two marble groups, the present data support a common provenance. So far, east Aegean islands and the Marmara region are favored.

Flow injection analysis with immobilized enzymes for process control of pullulan production by fermentation.

A flow injection system is described for the parallel determination of pullulan and glucose during a fermentation of the fungus Aureobasidium pullulans. The polysaccharide was hydrolyzed by pullulanase and amyloglucosidase, immobilized to controlled-pore glass (CPG). The glucose produced was oxidized by glucose dehydrogenase and the NADH formed determined photometrically. The pullulan concentration was calculated from the difference to the response obtained for free glucose. The calibration curves for monomer and polymer were both linear between 2 mg dm-3 and 20 mg dm-3. Analysis of one sample for the determination of glucose and pullulan took about 10 min.

Stabilization of NAD(+)-dependent dehydrogenases and diaphorase by bilayer encagement.

A feasibility study aimed at stabilization of L-lactate-dehydrogenase, L-malate-dehydrogenase, alcohol-dehydrogenase and diaphorase by the recently described method of enzyme 'encagement' was conducted. This method involves derivatizing the enzymes with polyglutaraldehyde, followed by secondary crosslinking with amino derivatives of polyacrylamide. Encagement conditions were optimized for each of the four enzymes, so as to achieve the highest thermal stability combined with highest catalytic activity. Depending on the encagement conditions, residual activities were in the range of 18% to 96% with higher values in the presence of cofactors. Increases in thermal stabilization of up to 26-fold were obtained. For high retention of enzymic activity and stability, the most significant factor was the concentration of polyglutaraldehyde; the crosslinking polymers had only a negligible effect. Furthermore, the significant enhancement in thermal stability could be attained without perturbing the kinetic parameters: Km values for NADH and pH optima remained unaltered for the stabilized enzymes.

An automatic dehydrogenase-based flow-injection system: application for the continuous determination of glucose and lactate in mammalian cell-cultures.

A concept for the development of an automatic flow-injection analyzer with integrated dehydrogenase columns and its application in the control of industrial processes is presented. The system is based upon a kernel consisting of a nested-loop injection unit, pumps for the filling of the injection loops and the transport of buffer and values for switching on the one hand between sample and standard solutions and on the other hand between different enzyme columns. A Microsoft Windows 3.x application 'WIN-FIA' controls interactively the whole system and can be easily adapted to a specific solution of an analytical problem. As an example, the flow-injection system was used for the continuous determination of glucose and lactate, using glucose dehydrogenase (GDH) and lactate dehydrogenase (LDH) as indicator enzymes, in a mammalian cell-culture fermentation process. The resulting concentration values are in good agreement with those obtained by discontinuously taken standard spectrophotometric enzyme assays.

[The collection and treatment of feed samples, particularly when suspecting mycotoxins]. / Zur Entnahme und Behandlung von Futtermittelproben, insbesondere bei Mykotoxinverdacht.

The sampling-procedure for feedstuffs in the official supervision of these products is performed according to the standards decreed by the feedstuff order in which the sampling tools, the wrapping and the pattern of acting are specified. In suspicion cases for mycotoxins in feedstuffs it is suitable to complete the sampling protocol with additional informations about feed and feeding practice as well as possibly observed health disturbances in animals. In this connection attention is directed to microbial caused changes of feedstuffs, which sometimes are clearly observable. Such indications allow to accommodate sampling to a present situation and can help substantially in clearing up cases of mycotoxicoses. In scope of mycotoxin research, sampling technique and procedure will be subjected to the special scientific questions.