RESUMEN
Surgical planning for StereoElectroEncephaloGraphy (SEEG) is a complex and patient specific task, where the experience and medical workflow of each institution may influence the final planning choices. To account for this variability, we developed a data-based Computer Assisted Planning (CAP) solution able to exploit the knowledge extracted by past cases. By the analysis of retrospective patients' data sets, our system proposes a pool of trajectories commonly used by the institution, which can be selected to initialize a new patient plan. An optimization framework adapts those to the patient's anatomy by optimizing clinical requirements (e.g. distance from vessel, gray matter recording and insertion angle), and adapting its strategy based on the trajectory type selected.The system has been customized based on the data of a single institution. Two neurosurgeons, working in a high-volume hospital, have validated it by using 15 retrospective patient data sets, with more than 200 trajectories reviewed. Both surgeons considered ~81% of the optimized trajectories as clinically feasible (75% inter-rater reliability). Quantitative comparison of distance from vessels, insertion angle and gray matter recording index showed that the optimized trajectories reached superior or comparable values with respect to the original manual plans. The results suggest that a tailored center-based solution could increase the acceptance rate of the automated trajectories proposed.
Asunto(s)
Electroencefalografía , Técnicas Estereotáxicas , Humanos , Conocimiento , Planificación de la Radioterapia Asistida por Computador , Reproducibilidad de los Resultados , Estudios RetrospectivosRESUMEN
OBJECTIVE The purpose of this study was to compare the accuracy of Neurolocate frameless registration system and frame-based registration for robotic stereoelectroencephalography (SEEG). METHODS The authors performed a 40-trajectory phantom laboratory study and a 127-trajectory retrospective analysis of a surgical series. The laboratory study was aimed at testing the noninferiority of the Neurolocate system. The analysis of the surgical series compared Neurolocate-based SEEG implantations with a frame-based historical control group. RESULTS The mean localization errors (LE) ± standard deviations (SD) for Neurolocate-based and frame-based trajectories were 0.67 ± 0.29 mm and 0.76 ± 0.34 mm, respectively, in the phantom study (p = 0.35). The median entry point LE was 0.59 mm (interquartile range [IQR] 0.25-0.88 mm) for Neurolocate-registration-based trajectories and 0.78 mm (IQR 0.49-1.08 mm) for frame-registration-based trajectories (p = 0.00002) in the clinical study. The median target point LE was 1.49 mm (IQR 1.06-2.4 mm) for Neurolocate-registration-based trajectories and 1.77 mm (IQR 1.25-2.5 mm) for frame-registration-based trajectories in the clinical study. All the surgical procedures were successful and uneventful. CONCLUSIONS The results of the phantom study demonstrate the noninferiority of Neurolocate frameless registration. The results of the retrospective surgical series analysis suggest that Neurolocate-based procedures can be more accurate than the frame-based ones. The safety profile of Neurolocate-based registration should be similar to that of frame-based registration. The Neurolocate system is comfortable, noninvasive, easy to use, and potentially faster than other registration devices.
Asunto(s)
Procedimientos Neuroquirúrgicos , Técnicas Estereotáxicas/instrumentación , Cirugía Asistida por Computador , Tacto/fisiología , Encefalopatías/cirugía , Electrodos Implantados , Electroencefalografía/métodos , Humanos , Procedimientos Neuroquirúrgicos/instrumentación , Procedimientos Neuroquirúrgicos/métodos , Estudios Retrospectivos , Robótica , Cirugía Asistida por Computador/instrumentación , Cirugía Asistida por Computador/métodosRESUMEN
PURPOSE: Computer-assisted surgical planning methods help to reduce the risks and costs in transpedicular fixation surgeries. However, most methods do not consider the speed and versatility of the planning as factors that improve its overall performance. In this work, we propose a method able to generate surgical plans in minimal time, within the required safety margins and accounting for the surgeon's personal preferences. METHODS: The proposed planning module takes as input a CT image of the patient, initial-guess insertion trajectories provided by the surgeon and a reduced set of parameters, delivering optimal screw sizes and trajectories in a very reduced time frame. RESULTS: The planning results were validated with quantitative metrics and feedback from surgeons. The whole planning pipeline can be executed at an estimated time of less than 1 min per vertebra. The surgeons remarked that the proposed trajectories remained in the safe area of the vertebra, and a Gertzbein-Robbins ranking of A or B was obtained for 95 % of them. CONCLUSIONS: The planning algorithm is safe and fast enough to perform in both pre-operative and intra-operative scenarios. Future steps will include the improvement of the preprocessing efficiency, as well as consideration of the spine's biomechanics and intervertebral rod constraints to improve the performance of the optimisation algorithm.
Asunto(s)
Tornillos Pediculares , Fusión Vertebral , Cirugía Asistida por Computador , Humanos , Tomografía Computarizada por Rayos X/métodos , Cirugía Asistida por Computador/métodos , Columna Vertebral/cirugía , Algoritmos , Fusión Vertebral/métodosRESUMEN
Surgical planning of percutaneous interventions has a crucial role to guarantee the success of minimally invasive surgeries. In the last decades, many methods have been proposed to reduce clinician work load related to the planning phase and to augment the information used in the definition of the optimal trajectory. In this survey, we include 113 articles related to computer assisted planning (CAP) methods and validations obtained from a systematic search on three databases. First, a general formulation of the problem is presented, independently from the surgical field involved, and the key steps involved in the development of a CAP solution are detailed. Secondly, we categorized the articles based on the main surgical applications, which have been object of study and we categorize them based on the type of assistance provided to the end-user.
Asunto(s)
Cirugía Asistida por Computador , Humanos , Procedimientos Quirúrgicos Mínimamente InvasivosRESUMEN
Three dimensional visualization of vascular structures can assist clinicians in preoperative planning, intra-operative guidance, and post-operative decision-making. The goal of this work is to provide an automatic, accurate and fast method for brain vessels segmentation in Contrast Enhanced Cone Beam Computed Tomography (CE-CBCT) dataset based on a residual Fully Convolutional Neural Network (FCNN). The proposed NN embeds in an encoder-decoder architecture residual elements which decreases the vanishing effect due to deep architecture while accelerating the convergence. Moreover, a two-stage training has been proposed as a countermeasure for the unbalanced nature of the dataset. The FCNN training was performed on 20 CE-CBCT volumes exploiting mini-batch gradient descent and the Adam optimizer. Binary cross-entropy was used as loss function. Performance evaluation was conducted considering 5 datasets. A median value of Dice, Precision and Recall of 0.79, 0.8 and 0.69 were obtained with respect to manual annotations.
Asunto(s)
Redes Neurales de la Computación , Encéfalo , Tomografía Computarizada de Haz Cónico , Procesamiento de Imagen Asistido por Computador , Tomografía Computarizada por Rayos XRESUMEN
StereoElectroEncephaloGraphy (SEEG) is a minimally invasive technique that consists of the insertion of multiple intracranial electrodes to precisely identify the epileptogenic focus. The planning of electrode trajectories is a cumbersome and time-consuming task. Current approaches to support the planning focus on electrode trajectory optimisation based on geometrical constraints but are not helpful to produce an initial electrode set to begin with the planning procedure. In this work, the authors propose a methodology that analyses retrospective planning data and builds a set of average trajectories, representing the practice of a clinical centre, which can be mapped to a new patient to initialise planning procedure. They collected and analysed the data from 75 anonymised patients, obtaining 30 exploratory patterns and 61 mean trajectories in an average brain space. A preliminary validation on a test set showed that they were able to correctly map 90% of those trajectories and, after optimisation, they have comparable or better values than manual trajectories in terms of distance from vessels and insertion angle. Finally, by detecting and analysing similar plans, they were able to identify eight planning strategies, which represent the main tailored sets of trajectories that neurosurgeons used to deal with the different patient cases.
RESUMEN
PURPOSE: Focal epilepsy is a neurological disease that can be surgically treated by removing area of the brain generating the seizures. The stereotactic electroencephalography (SEEG) procedure allows patient brain activity to be recorded in order to localize the onset of seizures through the placement of intracranial electrodes. The planning phase can be cumbersome and very time consuming, and no quantitative information is provided to neurosurgeons regarding the safety and efficacy of their trajectories. In this work, we present a novel architecture specifically designed to ease the SEEG trajectory planning using the 3D Slicer platform as a basis. METHODS: Trajectories are automatically optimized following criteria like vessel distance and insertion angle. Multi-trajectory optimization and conflict resolution are optimized through a selective brute force approach based on a conflict graph construction. Additionally, electrode-specific optimization constraints can be defined, and an advanced verification module allows neurosurgeons to evaluate the feasibility of the trajectory. RESULTS: A retrospective evaluation was performed using manually planned trajectories on 20 patients: the planning algorithm optimized and improved trajectories in 98% of cases. We were able to resolve and optimize the remaining 2% by applying electrode-specific constraints based on manual planning values. In addition, we found that the global parameters used discards 68% of the manual planned trajectories, even when they represent a safe clinical choice. CONCLUSIONS: Our approach improved manual planned trajectories in 98% of cases in terms of quantitative indexes, even when applying more conservative criteria with respect to actual clinical practice. The improved multi-trajectory strategy overcomes the previous work limitations and allows electrode optimization within a tolerable time span.
Asunto(s)
Algoritmos , Encéfalo/diagnóstico por imagen , Electrodos Implantados , Electroencefalografía/instrumentación , Epilepsia/cirugía , Imagenología Tridimensional , Imagen por Resonancia Magnética/métodos , Encéfalo/cirugía , Epilepsia/diagnóstico , Humanos , Estudios RetrospectivosRESUMEN
Robot-Assisted Rehabilitation (RAR) is relevant for treating patients affected by nervous system injuries (e.g., stroke and spinal cord injury). The accurate estimation of the joint angles of the patient limbs in RAR is critical to assess the patient improvement. The economical prevalent method to estimate the patient posture in Exoskeleton-based RAR is to approximate the limb joint angles with the ones of the Exoskeleton. This approximation is rough since their kinematic structures differ. Motion capture systems (MOCAPs) can improve the estimations, at the expenses of a considerable overload of the therapy setup. Alternatively, the Extended Inverse Kinematics Posture Estimation (EIKPE) computational method models the limb and Exoskeleton as differing parallel kinematic chains. EIKPE has been tested with single DOF movements of the wrist and elbow joints. This paper presents the assessment of EIKPE with elbow-shoulder compound movements (i.e., object prehension). Ground-truth for estimation assessment is obtained from an optical MOCAP (not intended for the treatment stage). The assessment shows EIKPE rendering a good numerical approximation of the actual posture during the compound movement execution, especially for the shoulder joint angles. This work opens the horizon for clinical studies with patient groups, Exoskeleton models, and movements types.