Update on chiral recognition mechanisms in separation science.

The stereospecific analysis of chiral molecules is an important issue in many scientific fields. In separation sciences, this is achieved via the formation of transient diastereomeric complexes between a chiral selector and the selectand enantiomers driven by molecular interactions including electrostatic, ion-dipole, dipole-dipole, van der Waals or π-π interactions as well as hydrogen or halogen bonds depending on the nature of selector and selectand. Nuclear magnetic resonance spectroscopy and molecular modeling methods are currently the most frequently applied techniques to understand the selector-selectand interactions at a molecular level and to draw conclusions on the chiral separation mechanism. The present short review summarizes some of the recent achievements for the understanding of the chiral recognition of the most important chiral selectors combining separation techniques with molecular modeling and/or spectroscopic techniques dating between 2020 and early 2024. The selectors include polysaccharide derivatives, cyclodextrins, macrocyclic glycopeptides, proteins, donor-acceptor type selectors, ion-exchangers, crown ethers, and molecular micelles. The application of chiral ionic liquids and chiral deep eutectic solvents, as well as further selectors, are also briefly addressed. A compilation of all published literature on chiral selectors has not been attempted.

Quality by design-guided development of a capillary electrophoresis method for the simultaneous chiral purity determination and impurity profiling of tamsulosin.

Analytical Quality by Design principles using the design of experiments were applied for the development of a capillary electrophoresis method for the determination of enantiomeric purity and chemically related impurities of tamsulosin. From initial scouting experiments, a dual cyclodextrin (CD) system composed of sulfated ß-CD and carboxymethyl-α-CD was selected as the chiral selector. A fractional factorial resolution V+ design was used for the identification of the critical process parameters, while a face-centered central composite design and Monte Carlo simulations were employed for final optimization and defining the design space of the method. The experimental conditions of the working point were: 30 mM sodium phosphate buffer, pH 3.0, containing 40 mg/mL sulfated ß-CD and 7 mg/mL carboxymethyl-α-CD, capillary temperature 18°C, applied voltage -23 kV. Following the assessment of robustness by applying a Plackett-Burman design, the method was validated according to the International Council for Harmonization of Technical Requirements for Pharmaceuticals for Human Use guideline Q2(R1). The method allowed the quantification of the chiral impurity and three other related impurities at the 0.1 % level with acceptable accuracy and precision.

Quality by design-assisted development of a capillary electrophoresis method for the enantiomeric purity determination of tenofovir.

A CE method was developed and validated for the assessment of the chiral purity of the drug tenofovir applying a quality by design approach. Following selection of a quaternary ammonium ß-CD as chiral selector, a fractional factorial resolution V+ design was employed for identification of the critical process parameters, while a central composite design served for method optimization. The final method used a 40/50.2 cm, 50 µm id fused-silica capillary, a BGE composed of a 100 mM sodium phosphate buffer, pH 6.4, containing 45 mg/mL quaternary ammonium ß-CD, an applied voltage of 18 kV, and a capillary temperature of 22°C. Robustness was assessed by a Plackett-Burman design. The method was validated according to guideline Q2(R1) of the International Council for Harmonization of Technical Requirements for Pharmaceuticals for Human Use and enabled the determination of the (S)-enantiomer of tenofovir at the 0.1% level.

Advances of capillary electrophoresis enantioseparations in pharmaceutical analysis (2017-2020).

Capillary electrophoresis is a powerful technique for the analysis of polar chiral compounds and has been widely accepted for analytical enantioseparations of drug compounds in pharmaceuticals and biological media. In addition, many mechanistic studies have been conducted in an attempt to rationalize enantioseparations in combination with spectroscopic and computational techniques. The present review will focus on recent examples of mechanistic aspects and summarize recent applications of stereoselective pharmaceutical and biomedical analysis published between January 2017 and November 2020. Various separation modes including electrokinetic chromatography in combination with several detection modes including laser-induced fluorescence, mass spectrometry and contactless conductivity detection will be discussed. A general trend also observed in other analytical techniques is the application of quality by design principles in method development and optimization.

12-Oxo-10-glutathionyl-5,8,14-eicosatrienoic acid (TOG10), a novel glutathione-containing eicosanoid generated via the 12-lipoxygenase pathway in human platelets.

Biologically active glutathione (GSH) conjugates of oxygenated fatty acids comprise a group of pro- and anti-inflammatory lipid mediators. While arachidonic acid (AA)-derived conjugates, as the cysteinyl leukotrienes (cys-LTs) and eoxins (EXs) have pro-inflammatory properties, conjugates in tissue regeneration (CTRs) biosynthesized from docosahexaenoic acid (DHA) exhibit pro-resolving activity. Human platelets express abundant amounts of platelet-type 12-lipoxygenase (pt12-LOX) and leukotriene C4 synthase (LTC4S). However, the only two described GSH conjugates formed by platelets are the AA-derived cys-LTs and the recently reported maresin CTRs (MCTRs). While cys-LTs are biosynthesized in a transcellular mechanism via the action of 5-LOX and LTC4S, MCTR1 is formed by 12-LOX and a yet unidentified GSH S-transferase (GST). Here, we present a novel GSH conjugate formed from AA via the 12-LOX pathway in human platelets. The 12-oxo-glutathione adduct, 12-oxo-10-glutathionyl-5,8,14-eicosatrienoic acid (TOG10), was identified by mass spectrometry using positive electrospray ionization. The structural proposal is supported by fragmentation data of the labeled metabolite obtained after incubation of deuterated AA (AA-d8). In platelets as well as in HEK293 cells stably expressing pt12-LOX, TOG10 biosynthesis was inhibited by the 12-LOX inhibitor ML-355 (5 µM), which confirms the involvement of pt12-LOX. Interestingly, TOG10 was formed independently of LTC4S in platelets. This is in accordance with the observation that the conjugate was also generated by AA-stimulated HEK_12-LOX cells in absence of LTC4S. Nevertheless, TOG10 can also be formed by LTC4S as the biosynthesis in HEK_12-LOX_LTC4S cells was reduced by the specific LTC4S inhibitor TK04a. In summary, TOG10 was identified as a new AA-derived GSH conjugate generated in human platelets via the action of pt12-LOX in combination with a GST.

Capillary electrophoresis-based enzyme assays for ß-lactamase enzymes.

Generic in-capillary as well as offline CE-based enzyme assays were developed for serine-ß-lactamases and metallo-ß-lactamases. The hydrolysis of benzylpenicillin to benzylpenicilloic acid was analyzed using 100 mM sodium phosphate solution, pH 6.0, as a background electrolyte. In-capillary assays employed an uncoated as well as a polyethylene oxide-coated capillary, while the offline assays employing long end and short end injection were performed in an uncoated capillary. Using procaine hydrochloride or 4-hydroxybenzoic acid as internal standard, the respective assays were validated with regard to linearity, LOD and LOQ, repeatability, precision, and accuracy. The assays were applied to the determination of the Michaelis-Menten parameters Km and Vmax of Bacillus cereus penicillinase as well as New Delhi metallo-ß-lactamase 1 and Verona integrin-encoded metallo-ß-lactamase 2. Furthermore, the inhibition of the enzymes by irreversible and competitive inhibitors was evaluated. Comparable data were obtained with all assays. The use of a simple substrate ensured broad applicability to the various types of ß-lactamases.

Cyclodextrin-mediated capillary electrophoresis enantioseparation of dansylated ß-amino acids with bicyclo[2.2.2]octane, bicyclo[3.1.1]heptane and cyclopenta[d][1,2]oxazole core structures.

The present study investigated the separation of bicyclic ß-amino acids with bicyclo[2.2.2]octane, bicyclo[3.1.1]heptane and cyclopenta[d][1,2]oxazole core structures by capillary electrophoresis using native cyclodextrins as well as neutral and charged derivatives as chiral selectors. The amino acids were derivatized with dansyl chloride to provide a UV chromophore. Separations were carried out at 20°C in a 48.5/40 cm, 50 µm fused-silica capillary at an applied voltage of 20 kV. Fifty millimolar sodium phosphate background electrolytes pH 2.5 and 7.2 containing either 5 or 30 mg/mL of the CDs were used. For the majority of the investigated CDs, enantioseparations could only be achieved at pH 2.5 when the analytes are positively charged. Successful enantioseparations as negatively charged analytes at pH 7.2 were only observed for few compounds. In the case of methyl-γ-cyclodextrin, opposite enantiomer migration order was observed in pH 2.5 or 7.2 background electrolytes. Dependence of the enantiomer migration order on the size of the cavity of the cyclodextrins was also found. Furthermore, the degree of methylation of ß-cyclodextrin derivatives affected the migration order of several analyte enantiomers.

Liquid chromatography-coupled mass spectrometry analysis of glutathione conjugates of oxygenated polyunsaturated fatty acids.

Glutathione (GSH) conjugates of oxygenated polyunsaturated fatty acids comprise a group of pro-inflammatory and pro-resolving lipid mediators formed in immunocompetent cells. While the pro-inflammatory conjugates such as the cysteinyl leukotrienes (cys-LTs), eoxins (EXs) and five-oxo-GSH conjugate (FOG7) derive from arachidonic acid (AA), the group of conjugates in tissue regeneration (CTRs) such as maresin CTRs (MCTRs), protectin CTRs (PCTRs) and resolvin CTRs (RCTRs) are biosynthesized from docosahexaenoic acid (DHA). Here, we present a gradient UPLC-MS/MS method for the analysis of pro-inflammatory and pro-resolving GSH conjugates using positive electrospray ionization (ESI(+)) and collision-induced fragmentation for unambiguous identification and structural information, and a negative ionization (ESI(-)) mode for quantification of the GSH conjugates. The method was employed to detect GSH conjugates in human platelets and macrophages. MCTRs were detected in platelets upon addition of exogenous docosahexaenoic acid (DHA) and the biosynthesis was independent on leukotriene C4 (LTC4) synthase activity. Pathogenic bacteria stimulated the formation of EXs and PCTRs in M2 macrophages, whereas Ca2+-ionophore activated the biosynthesis of LTC4 in M1 and M2 macrophage phenotypes. Together, our methodology covers the qualitative and quantitative analysis of GSH conjugates and gives an analytical basis for the detection and structural elucidation of cysteinyl-containing lipid mediators.

Quality by design-assisted development of a capillary electrophoresis method for the chiral purity determination of dexmedetomidine.

Dexmedetomidine is a selective α2 -adrenergic agonist used for patient sedation, while its enantiomer levomedetomidine has no sedative effects. As CE has been shown to be a powerful technique for enantiomer analysis, the aim of the study was the quality by design-based development of a CE-based limit test for the enantiomeric impurity levomedetomidine. The analytical target profile was defined that the method should be able to determine levomedetomidine with acceptable precision and accuracy at the 0.1% level. From initial scouting experiments, sulfated ß-cyclodextrin was selected as chiral selector. The critical process parameters were identified in a fractional factorial resolution V+ design, while a central composite face centered design and Monte Carlo simulations were used for defining the design space of the method. The selected working conditions were a 21.3/31.5 cm, 50 µm id fused-silica capillary, a 50 mM sodium phosphate buffer, pH 6.5, containing 40 mg/mL sulfated ß-cyclodextrin, a capillary temperature of 17°C and an applied voltage of 10 kV. Validation according to the ICH guideline Q2(R1) demonstrated repeatability and intermediate precision of content and migration time between 9.3 and 4.2% with accuracy in the range of 92.0 and 98.9%.

Development of a capillary electrophoresis method for the determination of the chiral purity of dextromethorphan by a dual selector system using quality by design methodology.

Dextromethorphan is a centrally acting antitussive drug, while its enantiomer levomethorphan is an illicit drug with opioid analgesic effects. As capillary electrophoresis has been proven as an ideal technique for enantiomer analysis, the present study was conducted in order to develop a capillary electrophoresis-based limit test for levomethorphan. The analytical target profile was defined as a method that should be able to determine levomethorphan with acceptable precision and accuracy at the 0.1 % level. From initial scouting experiments, a dual selector system consisting of sulfated ß-cyclodextrin and methyl-α-cyclodextrin was identified. The critical process parameters were evaluated in a fractional factorial resolution IV design followed by a central composite face-centered design and Monte Carlo simulations for defining the design space of the method. The selected working conditions consisted of a 30/40.2 cm, 50 µm id fused-silica capillary, 30 mM sodium phosphate buffer, pH 6.5, 16 mg/mL sulfated ß-cyclodextrin, and 14 mg/mL methyl-α-cyclodextrin at 20°C and 20 kV. The method was validated according to ICH guideline Q2(R1) and applied to the analysis of a capsule formulation. Furthermore, the apparent binding constants between the enantiomers and the cyclodextrins as well as complex mobilities were determined to understand the migration behavior of the analytes.

Recent advances in capillary electrophoretic migration techniques for pharmaceutical analysis (2013-2015).

This review updates and follows-up a previous review by highlighting recent advancements regarding capillary electromigration methodologies and applications in pharmaceutical analysis. General approaches such as quality by design as well as sample injection methods and detection sensitivity are discussed. The separation and analysis of drug-related substances, chiral CE, and chiral CE-MS in addition to the determination of physicochemical constants are addressed. The advantages of applying affinity capillary electrophoresis in studying receptor-ligand interactions are highlighted. Finally, current aspects related to the analysis of biopharmaceuticals are reviewed. The present review covers the literature between January 2013 and December 2015.

Stereospecific capillary electrophoresis assays using pentapeptide substrates for the study of Aspergillus nidulans methionine sulfoxide reductase A and mutant enzymes.

Stereospecific capillary electrophoresis-based methods for the analysis of methionine sulfoxide [Met(O)]-containing pentapeptides were developed in order to investigate the reduction of Met(O)-containing peptide substrates by recombinant Aspergillus nidulans methionine sulfoxide reductase A (MsrA) as well as enzymes carrying mutations in position Glu99 and Asp134. The separation of the diastereomers of the N-acetylated, C-terminally 2,4-dinitrophenyl (Dnp)-labeled pentapeptides ac-Lys-Phe-Met(O)-Lys-Lys-Dnp, ac-Lys-Asp-Met(O)-Asn-Lys-Dnp and ac-Lys-Asn-Met(O)-Asp-Lys-Dnp was achieved in 50 mM Tris-HCl buffers containing sulfated ß-CD in fused-silica capillaries, while the diastereomer separation of ac-Lys-Asp-Met(O)-Asp-Lys-Dnp was achieved by sulfated ß-CD-mediated MEKC. The methods were validated with regard to range, linearity, accuracy, limits of detection and quantitation as well as precision. Subsequently, the substrates were incubated with wild-type MsrA and three mutants in the presence of dithiothreitol as reductant. Wild-type MsrA displayed the highest activity towards all substrates compared to the mutants. Substitution of Glu99 by Gln resulted in the mutant with the lowest activity towards all substrates except for ac-Lys-Asn-Met(O)-Asp-Lys-Dnp, while replacement Asn for Asp134 lead to a higher activity towards ac-Lys-Asp-Met(O)-Asn-Lys-Dnp compared with the Glu99 mutant. The mutant with Glu instead of Asp134 was the most active among the mutant enzymes. Molecular modeling indicated that the conserved Glu99 residue is buried in the Met-S-(O) groove, which might contribute to the correct placing of substrates and, consequently, to the catalytic activity of MsrA, while Asp134 did not form hydrogen bonds with the substrates but only within the enzyme.

Development and validation of a capillary electrophoresis method for the characterization of sulfoethyl cellulose.

To characterize sulfoethyl cellulose el samples, a capillary electrophoresis method was developed and validated sulfoethyl cellulose el was hydrolyzed, and the resulting d-glucose derivatives were analyzed after reductive amination with 4-aminobenzoic acid using 150 mM boric acid, pH 9.5, as background electrolyte at 20°C and a voltage of 28 kV. Peak identification was derived from capillary electrophoresis with mass spectrometry using 25 mM ammonia adjusted to pH 6.2 by acetic acid as electrolyte. Besides mono-, di-, and trisulfoethyl d-glucose small amounts of disaccharides could be identified resulting from incomplete hydrolysis. The linearity of the borate buffer-based capillary electrophoresis method was evaluated using d-glucose in the concentration range of 3.9-97.5 µg/mL, while limits of detection and quantification derived from the signal-to-noise ratio of 3 and 10 were 0.4 ± 0.1 and 1.2 ± 0.3 µg/mL, respectively. Reproducibility and intermediate precision were determined using a hydrolyzed sulfoethyl cellulose el sample and ranged between 0.2 and 8.8% for migration times and between 0.3 and 10.4% for peak area. The method was applied to the analysis of the degree of substitution of synthetic sulfoethyl cellulose el samples obtained by variation of the synthetic process and compared to data obtained by elemental analysis.

Cyclodextrin-mediated enantioseparation of phenylalanine amide derivatives and amino alcohols by capillary electrophoresis-role of complexation constants and complex mobilities.

The separation of the enantiomers of phenylalanine amide and N-methyl derivatives as well as some amino alcohols was studied by CE in acidic BGEs using CDs as chiral selectors. The native CDs displayed only low chiral recognition ability at a concentration of 15 mg/mL in 20 mM sodium phosphate buffer, pH 2.5. In contrast, the analyte enantiomers were separated in the presence of randomly sulfated CDs under reversed polarity of the applied voltage. Sulfated ß-CD proved to be the most universal selector resulting in the enantioseparation of all analytes. Opposite enantiomer migration order depending on the size of the CD cavity was observed for phenylalanine amide and 2-amino-2-phenylethanol. The R-enantiomers migrated first in the presence of sulfated α-CD and γ-CD while the S-enantiomers were detected first in the presence of sulfated ß-CD. The enantioseparations could be rationalized based on analyte complexation by the respective CDs except for 2-amino-2-phenylethanol and sulfated ß-CD where essentially equal complexation constants were derived for the enantiomers. In this case, the migration behavior could be attributed to the mobilities of the enantiomer-CD complexes adding another example to the CE-specific phenomenon of enantioseparations based primarily on complex mobilities.

Recent advances in capillary electrophoretic migration techniques for pharmaceutical analysis.

Since the introduction about 30 years ago, CE techniques have gained a significant impact in pharmaceutical analysis. The present review covers recent advances and applications of CE for the analysis of pharmaceuticals. Both small molecules and biomolecules such as proteins are considered. The applications range from the determination of drug-related substances to the analysis of counterions and the determination of physicochemical parameters. Furthermore, general considerations of CE methods in pharmaceutical analysis are described.

Stereospecific electrophoretically mediated microanalysis assay for methionine sulfoxide reductase enzymes.

An electrophoretically mediated microanalysis assay (EMMA) for the determination of the stereoselective reduction of L-methionine sulfoxide diastereomers by methionine sulfoxide reductase enzymes was developed using fluorenylmethyloxycarbonyl (Fmoc)-L-methionine sulfoxide as substrate. The separation of the diastereomers of Fmoc-L-methionine sulfoxide and the product Fmoc-L-methionine was achieved in a successive multiple ionic-polymer layer-coated capillary using a 50 mM Tris buffer, pH 8.0, containing 30 mM sodium dodecyl sulfate as background electrolyte and an applied voltage of 25 kV. 4-Aminobenzoic acid was employed as internal standard. An injection sequence of incubation buffer, enzyme, substrate, enzyme, and incubation buffer was selected. The assay was optimized with regard to mixing time and mixing voltage and subsequently applied for the analysis of stereoselective reduction of Fmoc-L-methionine-(S)-sulfoxide by human methionine sulfoxide reductase A and of the Fmoc-L-methionine-(R)-sulfoxide by human methionine sulfoxide reductase B. The Michaelis-Menten constant, K m, and the maximum velocity, v max, were determined. Essentially identical data were determined by the electrophoretically mediated microanalysis assay and the analysis of the samples by CE upon offline incubation. Furthermore, it was shown for the first time that Fmoc-methionine-(R)-sulfoxide is a substrate of human methionine sulfoxide reductase B.

Capillary electrophoresis separation of peptide diastereomers that contain methionine sulfoxide by dual cyclodextrin-crown ether systems.

A dual-selector system employing achiral crown ethers in combination with cyclodextrins has been developed for the separation of peptide diastereomers that contain methionine sulfoxide. The combinations of the crown ethers 15-crown-5, 18-crown-6, Kryptofix® 21 and Kryptofix® 22 and ß-cyclodextrin, carboxymethyl-ß-cyclodextrin, and sulfated ß-cyclodextrin were screened at pH 2.5 and pH 8.0 using a 40/50.2 cm, 50 µm id fused-silica capillary and a separation voltage of 25 kV. No diastereomer separation was observed in the sole presence of crown ethers, while only sulfated ß-cyclodextrin was able to resolve some peptide diastereomers at pH 8.0. Depending on the amino acid sequence of the peptide and the applied cyclodextrin, the addition of crown ethers, especially the Krpytofix® diaza-crown ethers, resulted in significantly enhanced chiral recognition. Keeping one selector of the dual system constant, increasing concentrations of the second selector resulted in increased peak resolution and analyte migration time for peptide-crown ether-cyclodextrin combinations. The simultaneous diastereomer separation of three structurally related peptides was achieved using the dual selector system.

Isomerization and epimerization of the aspartyl tetrapeptide Ala-Phe-Asp-GlyOH at pH 10-A CE study.

Isomerization and enantiomerization of Asp in the tetrapeptide Ala-Phe-Asp-GlyOH are studied at pH 10 and 80°C as well as 25°C. CE-MS allowed the distinction between α-Asp and ß-Asp linkages in degradation products based on the ratio of the b and y fragment ions. Besides isomerization and enantiomerization of Asp, enantiomerization of Ala and Phe was also observed at both temperatures by chiral amino acid HPLC analysis using Marfey's reagent for derivatization. The rate of enantiomerization of the amino acids proceeded in the order Asp > Ala > Phe. The CE assay was validated with respect to linearity, LOQ, LOD, and precision and employed to characterize the time course of the degradation of the tetrapeptide upon incubation in borate buffer, pH 10. Isomerization to ß-Asp peptides was identified as the major degradation reaction. The configuration of Asp or Ala affected the half-life of the starting peptide to a minor extent but did not influence the distribution of the individual products under equilibrium conditions at 80°C. Degradation at 25°C proceeded very slowly so that the equilibrium was not reached after 245 days.

Stereospecific micellar electrokinetic chromatography assay of methionine sulfoxide reductase activity employing a multiple layer coated capillary.

A micellar electrokinetic chromatography method for the analysis of the l-methionine sulfoxide diastereomers employing a successive multiple ionic-polymer layer coated fused-silica capillary was developed and validated in order to investigate the stereospecificity of methionine sulfoxide reductases. The capillary coating consisted of a first layer of hexadimethrine and a second layer of dextran sulfate providing a stable strong cathodic EOF and consequently highly repeatable analyte migration times. The methionine sulfoxide diastereomers, methionine as product as well as ß-alanine as internal standard were derivatized by dabsyl chloride and separated using a 35 mM sodium phosphate buffer, pH 8.0, containing 25 mM SDS as BGE and a separation voltage of 25 kV. The method was validated in the range of 0.15-2.0 mM with respect to linearity and precision. The LODs of the analytes ranged between 0.04 and 0.10 mM. The assay was subsequently applied to determine the stereospecificity of methionine sulfoxide reductases as well as the enzyme kinetics of human methionine sulfoxide reductase A. Monitoring the decrease of the l-methionine-(S)-sulfoxide Km = 411.8 ± 33.8 µM and Vmax = 307.5 ± 10.8 µM/min were determined.

Differentiation of enantiomers by capillary electrophoresis.

Capillary electrophoresis (CE) has matured to one of the major liquid phase enantiodifferentiation techniques since the first report in 1985. This can be primarily attributed to the flexibility as well as the various modes available including electrokinetic chromatography (EKC), micellar electrokinetic chromatography (MEKC), and microemulsion electrokinetic chromatography (MEEKC). In contrast to chromatographic techniques, the chiral selector is mobile in the background electrolyte. Furthermore, a large variety of chiral selectors are available that can be easily combined in the same separation system. In addition, the migration order of the enantiomers can be adjusted by a number of approaches. In CE enantiodifferentiations the separation principle is comparable to chromatography while the principle of the movement of the analytes in the capillary is based on electrophoretic phenomena. The present chapter will focus on mechanistic aspects of CE enantioseparations including enantiomer migration order and the current understanding of selector-selectand structures. Selected examples of the basic enantioseparation modes EKC, MEKC, and MEEKC will be discussed.