Brownian Motion Influence on AFM Exosomes' Size Measurements.

Extracellular vesicles are evaluated by nanoparticle tracking analysis (NTA), providing information on their hydrodynamic diameters, and by atomic force microscopy (AFM) to calculate their geometric diameters. The aim of this study is to explore the influence of Brownian movements in a sample drop and preparation time on imaging-based measurements and to determine the relationship between the geometric and hydrodynamic sizes of the extracellular vesicles measured by the AFM and the NTA, respectively. Exosomes derived from the human prostate cancer cell line PC3 were evaluated by NTA and AFM, and those results were compared with Monte Carlo simulations. The mean size, evaluated by AFM shortly after application on the mica substrate, is less than its real value. It obtains the correct value faster for a thinner sample drop. Fitting the log-normal distribution to the geometric and hydrodynamic diameters leads to the conclusion that the latter could arise from the former by linear scaling by a factor that could be used to characterize the analyzed extracellular vesicles. The size of the vesicles attached to the mica substrate depends on time. The effect of Brownian motion and stretch of the lipid bilayer should be considered in the context of exosome AFM studies.

Ion-Pairing Mechanism for the Valinomycin-Mediated Transport of Potassium Ions across Phospholipid Bilayers.

The role of the anion on the ionophore properties of valinomycin was studied in a model floating bilayer lipid membrane (fBLM) using supporting electrolytes containing K+ with four different counter anion species (ClO4-, H2PO4-, Cl-, and F-). The electrochemical impedance spectra indicate that the membrane resistance of the bilayer decreases with the decrease of Gibbs free energy of anion solvation. The IR spectra demonstrate that valinomycin does not readily bind to K+ in the KH2PO4, KCl, and KF electrolyte solutions, but in the presence of KClO4, valinomycin readily binds to K+, forming a valinomycin-K+ complex. The results in the present paper reveal the role of the counter anion on the transport of cations by valinomycin across the lipid bilayer. The valinomycin-cation complex creates an ion pair with the anion, and this ion pair can enter the hydrophobic region of the bilayer transporting the cation across the membrane. Anions with low solvation energies facilitate the formation of the ion pair improving the ion conductivity of valinomycin-incorporated bilayers. This paper sheds new light on the transport mechanism of valinomycin ionophores and provides new information about the bioactivity of this molecule.

Designing a Useful Lipid Raft Model Membrane for Electrochemical and Surface Analytical Studies.

A model biomimetic system for the study of protein reconstitution or drug interactions should include lipid rafts in the mixed lipid monolayer, since they are usually the domains embedding membrane proteins and peptides. Four model lipid films composed of three components: 1,2-dioleoyl-sn-glycero-3-phosphocholine (DOPC), cholesterol (Chol) and sphingomyelin (SM) mixed in different molar ratios were proposed and investigated using surface pressure measurements and thermodynamic analysis of the monolayers at the air-water interface and imaged by Brewster angle microscopy. The ternary monolayers were transferred from the air-water onto the gold electrodes to form bilayer films and were studied for the first time by electrochemical methods: alternative current voltammetry and electrochemical impedance spectroscopy and imaged by atomic force microscopy. In excess of DOPC, the ternary systems remained too liquid for the raft region to be stable, while in the excess of cholesterol the layers were too solid. The layers with SM in excess lead to the formation of Chol:SM complexes but the amount of the fluid matrix was very low. The equimolar content of the three components lead to the formation of a stable and well-organized assembly with well-developed raft microdomains of larger thickness, surrounded by the more fluid part of the bilayer. The latter is proposed as a convenient raft model membrane for further physicochemical studies of interactions with drugs or pollutants or incorporation of membrane proteins.

Physicochemical Characterization of Daptomycin Interaction with Negatively Charged Lipid Membranes.

Daptomycin is known as an effective antibiotic lipopeptide which shows activity against the number of Gram-positive pathogens. Its primary target is the bacterial cell membrane. However, the detailed mechanism of daptomycin action is still subject to debate. In this paper, we have investigated the interactions between lipopeptide and model lipid films composed of negatively charged phosphatidylglycerols and cardiolipin. In order to evaluate the effect of daptomycin on the molecular organization and the properties of lipid assemblies, we have used surface pressure measurements and electrochemical methods combined with atomic force microscopy, quartz crystal microbalance, and surface-enhanced infrared absorption spectroscopy. Our results indicate that daptomycin interaction with the lipid membrane is complex. It involves daptomycin aggregation and partial insertion, which in turn affect the charge distribution on both sides of the membrane and may result in a gradient of water chemical potential. The latter can drive the flux of water across the membrane.

Water Structure in the Submembrane Region of a Floating Lipid Bilayer: The Effect of an Ion Channel Formation and the Channel Blocker.

The structure of water in the submembrane region of the bilayer of DPhPC floating (fBLM) on a monolayer of 1-thio-ß-d-glucose (ß-Tg)-modified gold nanoparticle film was studied by the surface-enhanced infrared absorption spectroscopy (SEIRAS). SEIRAS employs surface enhancement of the mean square electric field of the photon, which is acting on a few molecular layers above the film of gold nanoparticles. Therefore, it is uniquely suited to probe water molecules in the submembrane region and provides unique information concerning the structure of the hydrogen bond network of water surrounding the lipid bilayer. The IR spectra indicated that water with a strong hydrogen network is separating the membrane from the gold surface. This water is more ordered than the water in the bulk. When alamethicin, a peptide forming ion channels, is inserted into the membrane, the network is only slightly loosened. The addition of amiloride, an ion channel blocker, results in a significant decrease in the amount of water in the submembrane region. The remaining water has a significantly distorted hydrogen bond network. This study provides unique information about the effect of the ion channel on water transport across the bilayer. The electrode potential has a relatively small effect on water structure in the submembrane region. However, the IR studies demonstrated that water is less ordered at positive transmembrane potentials. The present results provide significant insight into the nature of hydration of a floating lipid bilayer on the gold electrode surface.

Physicochemical and Biological Characterization of Novel Membrane-Active Cationic Lipopeptides with Antimicrobial Properties.

We have designed and synthesized new short lipopeptides composed of tetrapeptide conjugated to fatty acids with different chain lengths. The amino acid sequence of the peptide moiety included d-phenylalanine, two residues of l-2,4-diaminobutyric acid and l-leucine. To explore the possible mechanism of lipopeptide action, we have provided a physicochemical characterization of their interactions with artificial lipid membranes. For this purpose, we have used monolayers and bilayers composed of lipids representative of Gram-negative and Gram-positive bacterial membranes. Using surface pressure measurements and atomic force microscopy, we were able to monitor the changes occurring within the films upon exposure to lipopeptides. Our experiments revealed that all lipopeptides can penetrate the lipid membranes and affect their molecular ordering. The latter results in membrane thinning and fluidization. However, the effect is stronger in the lipid films mimicking Gram-positive bacterial membranes. The results of the physicochemical characterization were compared with the biological activity of lipopeptides. The effect of lipopeptides on bacterial growth was tested on several strains of bacteria. It was revealed that lipopeptides show stronger antimicrobial activity against Gram-positive bacteria. At the same time, all tested compounds display relatively low hemolytic activity.

Effect of Interfacial Water on the Nanomechanical Properties of Negatively Charged Floating Bilayers Supported on Gold Electrodes.

Floating lipid bilayers composed of phosphatidylglycerols and cardiolipin were deposited on gold electrodes premodified with 1-thio-ß-d-glucose monolayer by spreading of small unilamellar vesicles. The resulting lipid membrane was homogeneous, and its thickness was ∼5.0 nm. Electrochemical characterization combined with surface-enhanced infrared absorption spectroscopy revealed that negative polarization of the electrode leads to accumulation of water molecules in the interfacial region between lipid membrane and the thioglucose film. Moreover, the buildup of water layer was demonstrated to affect the nanomechanical properties of the membrane. The latter was manifested by well-pronounced decrease of Young's modulus of the lipid bilayer correlating with increasing hydration. This effect was ascribed to the decoupling of the membrane from supporting thioglucose film due to the accumulation of interfacial water. As a result, the effective stiffness of the supporting layer is lower and it alters the nanomechanical behavior of lipid membrane. Our results provide strong experimental proof for the correlation between elastic properties of floating lipid membrane and the amount of water accumulated in the submembrane region.

Characterization of planar biomimetic lipid films composed of phosphatidylethanolamines and phosphatidylglycerols from Escherichia coli.

We have characterized planar lipid films composed of phosphatidylethanolamines (PE) and phosphatidylglycerols (PG) from E. coli bacteria. The nature of the interactions and miscibility of PE and PG components within mixed lipid films was evaluated based on surface pressure measurements and Brewster angle microscopy imaging at the air-water interface. We have found that PE and PG components show tendency to form separated domains at surface pressures relevant for biological membranes. Further, we have directly compared mechanisms of formation of supported lipid bilayers either on mica or Au(111) by spreading of small unilamellar vesicles. The bilayer formation was monitored by in situ atomic force microscopy imaging. The pathways of the vesicles spreading on each substrate are substantially different and the buildup of the bilayer on Au(111) occurs through complex multistep mechanism. The morphology and nanomechanical properties of the resulting PE/PG bilayers were thoroughly compared. We have found that the interactions between lipids and supporting substrate significantly affect molecular organization within the films since the bilayer on Au(111) is uniform in terms of the topography, while the same lipid composition on mica results in formation of distinct gel and liquid disordered domains. Different molecular organization affects also nanomechanical properties of lipid films. The latter were expressed in terms of Young's moduli and bending stiffness.

Modulation of Activity of Ultrashort Lipopeptides toward Negatively Charged Model Lipid Films.

Because of the increasing resistance of pathogens to commonly used antibiotics, there is an urgent need to find alternative antimicrobial compounds with different mechanisms of action. Among them, lipopeptides are recognized as promising candidates. In this work, the Langmuir technique and atomic force microscopy were employed to investigate the interactions of two novel lipopeptides with negatively charged phospholipid membranes, which served as a simplified model of inner membrane of Gram-negative bacteria. Lipid films contained phosphatidylethanolamine and phosphatidylglycerol extracts from E. coli bacteria. Lipopeptides were composed of palmitoyl chain covalently coupled to N-terminus of peptide with Trp-Lys-Leu-Lys amino acid sequence and the conformation of third residue was either d-Leu or l-Leu. It was found that chirality of leucine strongly affects interfacial behavior of these compounds, which was ascribed to the difference in effective size of the peptide portion of the molecules. Although the lipopeptides were the same in terms of amino acid sequence, charge, and identity of lipophilic chain, the experiments revealed that the barrier for their insertion into the lipid membrane is significantly different. Namely, it was lower for lipopeptide containing d-Leu residue. We have also found that insertion of the lipopeptides into the model membranes strongly alters lateral distribution of the membrane components and leads to its substantial fluidization. The dynamics of reorganization was noticeably faster in the presence of lipopeptide with smaller size of peptide moiety, i.e., containing d-Leu. It proves that effective size of the peptide headgroup is an important factor determining lipopeptide activity toward the lipid membranes.

Magnetoliposomes as Potential Carriers of Doxorubicin to Tumours.

Studies on magnetoliposomes (MLUV) as potential carriers for magnetic-field-dependent drug delivery are presented. The systems were formed with hydrophobic superparamagnetic iron oxide nanoparticles (SPIONs) confined within the bilayer of the liposomes. The nanomechanical properties of bilayer lipid membranes were evaluated and related to the amount of incorporated SPIONs. It was found that the presence of SPIONs in the lipid membrane leads to overall stiffening and increases morphological inhomogeneity, facilitating rupture of the MLUV membrane in a low-frequency alternating magnetic field (AMF). To verify the findings, doxorubicin release from MLUVs in the presence and absence of an AMF was measured. Under experimental conditions, drug release proceeds through MLUV rupture induced by mechanical vibration of SPIONs rather than through localized heating in the vicinity of the SPIONs.

Molecular resolution visualization of a pore formed by trichogin, an antimicrobial peptide, in a phospholipid matrix.

Electrochemical scanning tunneling microscopy (EC-STM) was employed to study the aggregation of trichogin OMe (TCG), an antimicrobial peptide, incorporated into a lipid monolayer. High-resolution EC-STM images show that trichogin molecules aggregate to form channels in the lipid monolayer. Two types of aggregates were observed in the images. The first consisted of a bundle of six TCG molecules surrounding a central pore. The structure and dimensions of this channel are similar to aggregates that in bilayers are described by the barrel-stave model. The EC-STM images also reveal that channels aggregate further to form a hexagonal lattice of a two dimensional (2D) nanocrystal. The model of 2D lattice was built from trimers of TCG molecules that alternatingly are oriented with either hydrophilic or hydrophobic faces to each other. In this way each TCG molecule is oriented partially with its hydrophilic face towards the hexameric pore allowing the formation of the column of water inside this pore.

Mechanism of Lipid Vesicles Spreading and Bilayer Formation on a Au(111) Surface.

Spreading of small unilamellar vesicles on solid surfaces is one of the most common ways to obtain supported lipid bilayers. Although the method has been used successfully for many years, the details of this process are still the subject of intense debate. Particularly controversial is the mechanism of bilayer formation on metallic surfaces like gold. In this work, we have employed scanning probe microscopy techniques to evaluate the details of lipid vesicles spreading and formation of the lipid bilayer on a Au(111) surface in a phosphate-buffered saline solution. Nanoscale imaging revealed that the mechanism of this process differs significantly from that usually assumed for hydrophilic surfaces such as mica, glass, and silicon oxide. Formation of the bilayer on gold involves several steps. Initially, the vesicles accumulate on a gold surface and release lipid molecules that adsorb on a Au(111) surface, giving rise to the appearance of highly ordered stripelike domains. The latter serve as a template for the buildup of a hemimicellar film, which contributes to the increased hydrophilicity of the external surface and facilitates further adsorption and rupture of the vesicles. As a result, the bilayer is spread over a hemimicellar film, and then it is followed by slow fusion between coupled layers leading to formation of a single bilayer supported on a gold surface. We believe that the results presented in this work may provide some new insights into the area of research related to supported lipid bilayers.

Dependence of interfacial film organization on lipid molecular structure.

Combination of surface analytical techniques was employed to investigate the interfacial behavior of the two designed lipids-N-stearoylglycine (1) and its bulky neutral headgroup-containing derivative N-stearoylvaline ethyl ester (2)-at the air-solution interface and as transferred layers on different substrates. Formation of monolayers at the air-water interface was monitored on pure water and on aqueous solutions of different pH. Crystallization effects were visualized at pure water by recording the hystereses in the Langmuir-Blodgett (LB) isotherms and by transferring the layers onto mica, gold (111), and ITO (indium-tin oxide on glass) electrodes. Subphase pH affects the morphology and patch formation in monolayers of 1, as evidenced by BAM measurements. At pH 8.2, formation of well-ordered crystallites is observed, which upon compression elongate according to predominantly 1-D growth mechanism to form a dense layer of crystallites. This effect is not observed in monolayers of 2, whose headgroup is not protonated. The orientation of layers of 1 transferred to the solid supports is also pH dependent, and their stability can be related to formation of a hydrogen-bonded networks. AFM images of 1 exhibited platelets of multilayer phase. The IR spectra of the ITO substrates covered by 1 indicated formation of hydrogen bonds between the amide groups. The nature of the adsorption layer and its organization as a function of potential were studied in-depth by EC STM using Au(111) as the substrate. A model showing the arrangement of hydrogen bonds between adsorbed molecules is presented and related to the observed organization of the layer.

Formation of sparsely tethered bilayer lipid membrane on a biodegradable self-assembled monolayer of poly(lactic acid).

The utilization of biomimetic membranes supported by advanced self-assembled monolayers is gaining attraction as a promising sensing tool. Biomimetic membranes offer exceptional biocompatibility and adsorption capacity upon degradation, transcending their role as mere research instruments to open new avenues in biosensing. This study focused on anchoring a sparsely tethered bilayer lipid membrane onto a self-assembled monolayer composed of a biodegradable polymer, functionalized with poly(ethylene glycol)-cholesterol moieties, for lipid membrane integration. Real-time monitoring via quartz crystal microbalance, coupled with characterization using surface-enhanced infrared absorption spectroscopy and electrochemical impedance spectroscopy, provided comprehensive insights into each manufacturing phase. The resulting lipid layer, along with transmembrane pores formed by gramicidin A, exhibited robust stability. Electrochemical impedance spectroscopy analysis confirmed membrane integrity, successful pore formation, and consistent channel density. Notably, gramicidin A demonstrated sustained functionality as an ion channel upon reconstitution, with its functionality being effectively blocked and inhibited in the presence of calcium ions. These findings mark significant strides in developing intricate biodegradable nanomaterials with promising applications in biomedicine.

Stimuli-Responsive Oligourea Molecular Films.

We have designed and synthesized a helical cysteamine-terminated oligourea foldamer composed of ten urea residues featuring side carboxyl and amine groups. The carboxyl group is located in proximity to the C-terminus of the oligourea and hence at the negative pole of the helix dipole. The amine group is located close to the N-terminus and hence at the positive pole of the helix dipole. Beyond the already remarkable dipole moment inherent in oligourea 2.5 helices, the incorporation of additional charges originating from the carboxylic and amine groups is supposed to impact the overall charge distribution along the molecule. These molecules were self-assembled into monolayers on a gold substrate, allowing us to investigate the influence of an electric field on these polar helices. By applying surface-enhanced infrared reflection-absorption spectroscopy, we proved that molecules within the monolayers tend to reorient themselves more vertically when a negative bias is applied to the surface. It was also found that surface-confined oligourea molecules affected by the external electric field tend to rearrange the electron density at urea groups, leading to the stabilization of the resonance structure with charge transfer character. The presence of the external electric field also affected the nanomechanical properties of the oligourea films, suggesting that molecules also tend to reorient in the ambient environment without an electrolyte solution. Under the same conditions, the helical oligourea displayed a robust piezoresponse, particularly noteworthy given the slender thickness of the monolayer, which measured approximately 1.2 nm. This observation demonstrates that thin molecular films composed of oligoureas may exhibit stimulus-responsive properties. This, in turn, may be used in nanotechnology systems as actuators or functional films, enabling precise control of their thickness in the range of even fractions of nanometers.

Surface-Bioengineered Extracellular Vesicles Seeking Molecular Biotargets in Lung Cancer Cells.

Personalized medicine is a new approach to modern oncology. Here, to facilitate the application of extracellular vesicles (EVs) derived from lung cancer cells as potent advanced therapy medicinal products in lung cancer, the EV membrane was functionalized with a specific ligand for targeting purposes. In this role, the most effective heptapeptide in binding to lung cancer cells (PTHTRWA) was used. The functionalization process of EV surface was performed through the C- or N-terminal end of the heptapeptide. To prove the activity of the EVs functionalized with PTHTRWA, both a model of lipid membrane mimicking normal and cancerous cell membranes as well as human adenocarcinomic alveolar basal epithelial cells (A549) and human normal bronchial epithelial cells (BEAS-2B) have been exposed to these bioconstructs. Magnetic resonance imaging (MRI) showed that the as-bioengineered PTHTRWA-EVs loaded with superparamagnetic iron oxide nanoparticle (SPIO) cargos reach the growing tumor when dosed intravenously in NUDE Balb/c mice bearing A549 cancer. Molecular dynamics (MD) in silico studies elucidated a high affinity of the synthesized peptide to the α5ß1 integrin. Preclinical safety assays did not evidence any cytotoxic or genotoxic effects of the PTHTRWA-bioengineered EVs.

Oxidation of DNA followed by conformational change after OH radical attack.

Examination of the attack of OH radicals produced in the Fenton way on DNA molecules is important from biological, biochemical, and biosensor points of view. Calf thymus DNA was selected for the investigation, since this natural oligonucleotide is often used in examination of drug-DNA interactions. Particularly useful was the coherent application of five techniques: electrochemical quartz crystal microbalance (EQCM), square wave voltammetry (SWV), circular dichroism (CD), atomic force microscopy (AFM), and UV-vis spectroscopy. These techniques differ in sensitivity to radical concentration and layer thickness of DNA. EQCM appeared to be the most sensitive in monitoring the consequences of OH radical actions; radical activities corresponding to nanomolar concentrations of H(2)O(2) could be detected. SWV and AFM detection gave noticeable signal for higher than 1 µM H(2)O(2) concentrations. EQCM data led to a conclusion that at higher than 1 µM H(2)O(2) concentrations the DNA strands were locally disintegrated. The corresponding DNA loss was ca. 16%. It has been shown that in the presence of α-tocopherol, a strong antioxidant, the damage caused by OH radicals was practically prevented.

Review: Peptides and proteins wired into the electrical circuits: an SPM-based approach.

Development of molecular scale electronics stimulates the search for new functional materials and compounds. One of the promising directions of further growth within this field is bioelectronics, which assumes the use of electron transfer (ET)-mediating properties of bio-related compounds. Because of the structural and functional versatility, peptides and proteins are particularly well suited to perform as single-molecule-based elements of circuits or sensing devices. In this review, it is demonstrated that purposely designed systems such as molecular junctions are excellent platforms for the studies of ET properties of peptides and proteins at nanoscale level. Using experimental approach based on scanning probe microscopy, individual molecules can be directly wired between two metallic contacts, and their conductance can be determined. ET behavior of the peptides and proteins can be analyzed in terms of their applicability as molecular wires, switches, diodes and elements of sensing devices.

Sparsely tethered bilayer lipid membranes formed by self-assembly of bicelles: Spectroelectrochemical characterization and incorporation of transmembrane protein.

Many biochemical processes related to proper homeostasis take place in cell membranes. The key molecules involved in these processes are proteins, including transmembrane proteins. These macromolecules still challenge the understanding of their function within the membrane. Biomimetic models that mimic the properties of the cell membrane can help understand their functionality. Unfortunately, preserving the native protein structure in such systems is problematic. A possible solution to this problem involves the use of bicelles. Their unique properties make integrating bicelles with transmembrane proteins manageable while preserving their native structure. Hitherto, bicelles have not been used as precursors for protein-hosting lipid membranes deposited on solid substrates like pre-modified gold. Here, we demonstrated that bicelles can be self-assembled to form sparsely tethered bilayer lipid membranes and the properties of the resulting membrane satisfy the conditions suitable for transmembrane protein insertion. We showed that the incorporation of α-hemolysin toxin in the lipid membrane leads to a decrease in membrane resistance due to pore formation. Simultaneously, the insertion of the protein causes a drop in the capacitance of the membrane-modified electrode, which can be explained by the dehydration of the polar region of the lipid bilayer and the loss of water from the submembrane region.

De novo designed self-assembling helicomimetic lipooligoureas with antibacterial activity.

The overuse of antibiotics has led to a rise in infections caused by multidrug-resistant bacteria, resulting in a need for new antibacterial compounds with different modes of action. In this paper, we describe a new class of compounds called lipooligoureas, which are foldamer-based mimetics of antimicrobial lipopeptides. The lipooligoureas consist of an acyl chain connected to the N-terminus of an oligourea head group that exhibits a well-defined 2.5-helix secondary structure, which is further stabilized by the attachment of the lipophilic chain to the oligourea moiety. These compounds meet the established criteria for membranolytic compounds by possessing an amphiphilic structure that promotes the internalization and partitioning of the molecules into the lipid membrane. The presence of positively charged urea residues promotes electrostatic interactions with the negatively charged bacterial membrane. The subtle structural differences in oligourea head group influence the compounds' aggregation behavior, with the number and position of positively charged urea residues correlating with their aggregation ability. The biological activity of these compounds in inhibiting bacterial growth is correlated with their ability to aggregate, with stronger antibacterial properties exhibited by those that aggregate more easily. However, the concentration inhibiting bacterial growth is significantly lower than the critical aggregation concentration values, suggesting that the mechanism of action involves the monomeric forms of lipooligoureas. Nonetheless, a mechanism based on membrane-induced aggregation cannot be ruled out. The lipooligoureas exhibit higher activity towards Gram-positive bacteria than against Gram-negative bacteria, which is indicative of certain selectivity of these compounds. It is also demonstrated that lipooligoureas exhibit increased stability against proteolytic degradation in human blood serum.