Quantifying Acidity in Heterogeneous Systems: Biphasic pKa Values.

Acidities of lipophilic compounds, such as various ligands or catalysts, in systems consisting of an aqueous phase at equilibrium with a water-immiscible phase (lipid bilayers, phase transfer catalysis, sensor membranes, to name just few) are typically approximated by the aqueous pKa values. Our research shows that such approximations can lead to seriously biased estimations of the acidities as the bulk of solvated H+ ions reside in the aqueous phase, while the lipophilic species─both neutral acid and anion─predominantly reside in the organic phase. Therefore, the use of aqueous pKa in such situations is not justified. In this work, we provide a more accurate description of the acidities of acids in such systems by applying the biphasic pKa concept. Biphasic pKa values (pKaow values) of 35 acids of various structures and chemical properties were determined in a 1-octanol:water system. We provide detailed descriptions of the UV-vis and NMR measurement methods. The directly obtained (apparent) pKaow values depend on concentration. Concentration-independent values were obtained by extrapolating the apparent values to zero concentration using a Debye-Hückel model.

Novel Lipophilic Fluorophores with Highly Acidity-Dependent Two-Photon Response.

Lipophilic fluorophores are widely implemented in nonlinear microscopy; however, few existing membrane-specific probes combine the high brightness of two-photon excited fluorescence (2PEF) with pH sensitivity. Herein we describe four novel two-photon excited fluorophores, based on a coumarin 151 core structure, where lipophilicity is induced by a covalently attached phosphazene moiety. Changing the environmental acidity using trifluoromethanesulfonic (triflic) acid leads to profound changes in the linear fluorescence and 2PEF characteristics, due to chromophores' switching between neutral- and protonated forms. We characterize this dependence by measuring the two-photon absorption (2PA) spectra over the region λ2PA =550-1000 nm, observing 2PA cross sections of σ2PA =10-20 GM, with an associated 2PEF brightness of 10-13 GM, in neutral solutions of both acetonitrile and n-octanol. Although quantum chemical modelling and NMR measurements show that, at high chromophore concentrations, protonation may be accompanied by a dimerization process, these dimers likely do not form at the lower concentrations used in optical spectroscopy.

Quantitative electrospray ionization efficiency scale: 10 years after.

RATIONALE: The first comprehensive quantitative scale of the efficiency of electrospray ionization (ESI) in the positive mode by monoprotonation, containing 62 compounds, was published in 2010. Several trends were found between the compound structure and ionization efficiency (IE) but, possibly because of the limited diversity of the compounds, some questions remained. This work undertakes to align the new data with the originally published IE scale and carry out statistical analysis of the resulting more extensive and diverse data set to derive more grounded relationships and offer a possibility of predicting logIE values. METHODS: Recently, several new IE studies with numerous compounds have been conducted. In several of them, more detailed investigations of the influence of compound structure, solvent properties, or instrument settings have been conducted. IE data from these studies and results from this work were combined, and the multilinear regression method was applied to relate IE to various compound parameters. RESULTS: The most comprehensive IE scale available, containing 334 compounds of highly diverse chemical nature and spanning 6 orders of magnitude of IE, has been compiled. Several useful trends were revealed. CONCLUSIONS: The ESI ionization efficiency of a compound by protonation is mainly affected by three factors: basicity (expressed by pKaH in water), molecular size (expressed by molar volume or surface area), and hydrophobicity of the ion (expressed by charge delocalization in the ion or its partition coefficient between a water-acetonitrile mixture and hexane). The presented models can be used for tentative prediction of logIE of new compounds (under the used conditions) from parameters that can be computed using commercially available software. The root mean square error of prediction is in the range of 0.7-0.8 log units.

pKaH values and θH angles of phosphanes to predict their electronic and steric parameters.

Phosphanes play an important role in various applications, serving as a class of organic bases with basicities spanning more than 30 orders of magnitude. Accessing comprehensive basicity data for phosphanes has been challenging due to scattered information across multiple sources and notable gaps in the existing data. In this report, we present basicities (pKaH values) of a diverse set of phosphanes, both newly measured or calculated and collected from the literature. We demonstrate that pKaH values can serve as an alternative to Tolman electronic parameters (TEP values) in evaluating the electronic properties of phosphanes. Additionally, we suggest parameters for assessing the steric properties of phosphanes without the need for preparation or calculation of metal-ligand complexes.

Coumarin-based derivatization reagent for LC-MS analysis of amino acids.

In this paper, we report about the application of a sensitive fluorescent derivatization reagent Coumarin151-N-Hydroxysuccinimidyl Carbamate (Cou151DSC) for amino compounds using high-performance liquid chromatography (HPLC) compatible with ultraviolet (UV), fluorescence detector (FLD) and electrospray ionization - tandem mass spectrometry (ESI-MS/MS)-positive mode. We optimized derivatization procedure and validated an analytical method to determine 24 amino acids in Kvass drink using Norvaline as an internal standard. Compared to 6-Aminoquinolyl-N-Hydroxysuccinimidyl Carbamate (6-AQC), the derivatization with Cou151 DSC is faster and milder, for 5 min at 40°C instead of 15 min at 55°C. The limit of quantitation (LOQ, pmol on column) for 21 amino acids in this work is lower 1.1-30.0 times than values obtained with 6-AQC. The derivatives have excitation wavelength at 355 nm and emission wavelength at 486 nm. Their MS/MS fragmentation behaviors were examined together with 23 other amino compounds. We found three possibilities to lose a neutral group which can be Coumarin 151 isocyanate Cou151NCO (255 Da), amine Coumarin 151 (229 Da) or urea Cou151CONH2 (272 Da). The accuracy of the proposed method was within 83-107% with good relative standard deviations (RSDs) of equal or less than 6%. The recoveries were from 82 to 120% in four spiked concentrations, repeatability was between 0 and 14%. The intra- and inter-day precision are less than 13% and 18%, respectively.

Comparison of two azobenzene-based amino acid derivatization reagents for LC-MS/MS analysis in positive and negative ESI modes.

Derivatization reagents based on azobenzene containing different N-hydroxysuccinimidyl moieties- AzoB (carbamate) and AzoC (ester) - are proposed for the LC-ESI-MS analysis of free amino acids in fermented beverages and juices. A dual comparison between LC-MS/MS in positive and negative ESI modes in dynamic Multiple Reaction Monitoring (dMRM) and Neutral Loss Scan was investigated. The results indicate that the studied carbamate derivatization reagent, AzoB, can be employed for targeted analysis (MS/MS) but also for non-targeted analysis of derivatized amino acids thanks to its constant neutral loss (223 Da) that is the same in both ionisation modes. For amines, precursor ion scan can be used as identification tool. The derivatization properties of AzoB and AzoC were compared against other derivatization reagents, and they showed advantages such as fast derivatization reaction and good reactivity with secondary amines. AzoC also displayed a disadvantage -side products were formed that affect the quantitation. Free amino acids profile of Kvass (a fermented beverage from eastern Europe) was determined for first time, proline was found to be the most abundant amino acid.

Non-invasive analysis of natural textile dyes using fluorescence excitation-emission matrices.

Multidimensional fluorescence spectroscopy was assessed as a non-invasive and non-destructive method for the analysis of components in natural textile dyes. Results demonstrate that components in the natural dyes fluoresce and wool's intrinsic fluorescence is, in many cases, not a considerable analytical interferent. In the case of some self-dyed reference yarns, like those dyed with northern and lady's bedstraws, wood horsetail, safflower, salted shield lichen, dyer's madder and cochineal, the fluorescence excitation-emission matrices (EEMs) are sufficiently characteristic for using them as a primary means of identification (or assignment to a family of dyes). With most of the studied yellow and green dyes (heather, silver birch, some bloodred webcap treatments, alkanet), however, the spectra can be used as additional information for identification. This study reports multidimensional fluorescence data for a collection of wools dyed with natural dyes (31 dyed wool yarn samples that were self-dyed with 18 different natural dyes) that were used as references in a case study of two historical textiles for which liquid chromatography-mass spectrometry was used as a confirmatory technique. Given its utility as a rapid and non-destructive/non-invasive method with information-rich multidimensional EEM output, the front-face fluorescence spectroscopy of surfaces using a fiber optic probe is a promising technique for the analysis of dyes on cultural heritage textiles.

Experimental and Computational Study of Aminoacridines as MALDI(-)-MS Matrix Materials for the Analysis of Complex Samples.

Monoaminoacridines (1-, 2-, 3-, 4-, and 9-aminoacridine) were studied for suitability as matrices in the negative ion mode matrix-assisted laser desorption/ionization mass spectrometry (MALDI(-)-MS) analysis of various samples. This is the first study to examine 1-, 2-, and 4-aminoacridine as potential matrix material candidates for MALDI(-)-MS. In addition, spectral (UV-Vis absorption and fluorescence), proton transfer-related (basicity and autoprotolysis), and crystallization properties of these compounds were characterized experimentally and/or computationally. For testing the capabilities of these aminoacridines as matrix materials, four samples related to cultural heritage materials-stearic acid, colophony resin, dyer's madder dye, and a resinous case-study sample from a shipwreck-were analyzed with MALDI(-)-MS. A novel algorithm (implemented as an executable Python script) for MS data analysis was developed to compare the five matrix materials and to help mass spectrometrists rapidly identify peaks originating from the sample and matrix material. It was determined that all five of the studied aminoacridines can successfully be used as matrix materials in MALDI(-)-MS analysis. As an interesting finding, in several cases, the best mass spectra were obtained by using a relatively small amount of matrix material mixed with an excess amount of sample. 3- and 4-aminoacridine outperformed the other aminoacridines in the ease of obtaining acceptable spectra, average number of ions identified in the mass spectra, and low dependence of the sample-to-matrix mass ratio on experimental results.