Terahertz beam with radial or orthogonal to laser polarization from a single-color femtosecond filament.

At the selected frequencies from 0.3 to 10 THz we measured the two-dimensional (2D) distributions of fluence and polarization of terahertz (THz) emission from a single-color femtosecond filament. At the majority of frequencies studied, the THz beam has a donut-like shape with azimuthal modulations and radial polarization. At the maximal modulation, THz beam takes the form of the two lobes and polarization of the THz field degenerates into orthogonal to the laser pulse polarization direction. Violation of the radially polarized donut beam shape is due to destructive interference of THz waves driven by light pressure directed along the laser beam propagation axis and ponderomotive force parallel to the laser polarization.

Observation of conical emission from DC-biased filament at 10 THz.

The terahertz (THz) radiation emitted by an air-based femtosecond filament biased by a static electric field is known to have on-axis shape and relatively low frequency spectrum in contrast to the unbiased single-color and two-color schemes. Here, we measure the THz emission of a 15-kV/cm-biased filament in air produced by a 740-nm, 1.8-mJ, 90-fs pulse and demonstrate that a flat-top on-axis THz angular distribution of the emission at 0.5-1 THz transforms into a contrast ring-shaped one at 10 THz.

Broadband (8.5-13.5 µm) intra-pulse difference frequency generation in a LiGaS2 crystal of a 90 fs 744 nm laser pulse after its continuous redshift in air.

Broadband frequency downconversion of a 90 fs 744 nm Ti:sapphire laser pulse into the mid-infrared (IR) was demonstrated via its filamentation-induced self-frequency shift in air and subsequent intra-pulse difference frequency generation in a LiGaS2 crystal. The filamentation of the laser pulse in air provided its continuous spectral broadening to the Stokes wing with spectral humps separated by ∼1000cm-1 that was appropriate for the laser pulse difference frequency conversion into the mid-IR. The difference frequency emission spectrum spanned from 8.5 to 13.5 µm at the e-2 level. The transform limited pulse duration of the mid-IR pulse was 47 fs, which corresponded to a 1.3-cycle laser pulse. Energy conversion efficiency was up to 10-4 and 5⋅10-4 without and with chirp compensation, respectively.

Flat-top THz directional diagram of a DC-biased filament.

In the experiment, the laser pulse (744 nm, 0.5 mJ, 90 fs) focused into the air gap between the plane electrodes biased by a 10 kV/cm field (DC-biased filament) produced terahertz (THz) radiation. At the selected frequencies of ν=0.3, 0.5, 1 THz, a wide flat-top angular distribution was measured by a bolometer rotating in the plane of the electrodes. The simulations based on the unidirectional pulse propagation equation with fine 0.01 THz resolution and 3 PHz frequency domain showed the transition of the THz directional diagram from the flat-top at ν≲1THz to the conical one at ν>8THz due to the destructive interference of THz waves from the ionization front propagating with the superluminal velocity. Refraction on the plasma is not the major factor in ring formation.

Highly efficient stimulated Raman scattering of sub-picosecond laser pulses in BaWO4 for 10.6 µm difference frequency generation.

Transient stimulated Raman scattering (SRS) of 0.3 ps 515 nm laser pulses in ${\rm BaWO_4}$BaWO4 crystal was experimentally demonstrated with efficiency up to ${\sim}{20}\% $∼20% for the Stokes component with a wavenumber of ${\sim}{925}\;{{\rm cm}^{ - 1}}$∼925cm-1 in a simple single-pass geometry. This anomalous high efficiency was obtained due to the laser pulse self-phase modulation resulting in spectral broadening and seeding the SRS. The applicability of seed pulse production for a high-pressure sub-picosecond ${{\rm CO}_2}$CO2 laser amplifier via difference frequency generation in ${{\rm LiGaS}_2}$LiGaS2 crystal was numerically verified.

Fifteen meter long uninterrupted filaments from sub-terawatt ultraviolet pulse in air.

A technique is presented to create uninterrupted long ultraviolet filaments in air using appropriately structured transmission mesh. The mesh with different cell sizes was inserted into 10-cm parallel beam of 0.2-J, 248-nm, and 870-fs pulse propagating along ~100-m corridor. Transverse positions of multiple filaments formed by the optimum size cells were reproducible within at least 15 m along the propagation path. 3D+time simulations confirmed uninterrupted plasma channels with fixed positions in the transverse space similar to the experiment. Unoptimized cell size resulted in filaments shifting towards the cell center and destruction of uninterrupted filaments.

Near-critical phase explosion promoting breakdown plasma ignition during laser ablation of graphite.

Removal rate, air shock, and ablative recoil pressure parameters were measured as a function of laser intensity I(peak) during nanosecond laser ablation of graphite. Surface vaporization of molten graphite at low intensities I(peak)<0.15 GW/cm(2) was observed to transform into its near-critical phase explosion (intense homogeneous boiling) at the threshold intensity I(PE)≈0.15 GW/cm(2) in the form of a drastic, correlated rise of removal rate, air shock, and ablative recoil pressure magnitudes. Just above this threshold (I(peak)≥0.25 GW/cm(2)), the explosive mass removal ended up with saturation of the removal rate, much slower increase of the air and recoil pressure magnitudes, and appearance of a visible surface plasma spark. In this regime, the measured far-field air shock pressure amplitude exhibits a sublinear dependence on laser intensity (∝I(peak)(4/9)), while the source plasma shock pressure demonstrates a sublinear trend (∝I(peak)(3/4)), both indicating the subcritical character of the plasma. Against expectations, in this regime the plasma recoil pressure increases versus I(peak) superlinearly (∝I(peak)(1.1)), rather than sublinearly (∝I(peak)(3/4)), with the mentioned difference related to the intensity-dependent initial spatial plasma dimensions within the laser waist on the graphite surface and to the plasma formation time during the heating laser pulse (overall, the pressure source effect). The strict coincidence of the phase explosion, providing high (kbar) hydrodynamic pressures of ablation products, and the ignition of ablative laser plasma in the carbon plume may indicate the ablative pressure-dependent character of the underlying optical breakdown at the high plume pressures, initiating the plasma formation. The experimental data evidence that the spatiotemporal extension of the plasma in the laser plume and ambient air during the heating laser pulse is supported by fast lateral electron and radiative heat conduction (laser-supported combustion wave regime), rather than by propagation of a strong shock wave (laser-supported detonation wave regime).