Esterase isozyme polymorphism, specific and nonspecific esterase, syngenic lines development and natural occurrence of a thermostable esterase in the tropical silkworm Bombyx mori L.

Esterase isozyme polymorphism was documented for digestive juice and haemolymph of the tropical multivoltine silkworm, Bombyx mori L., breed CB5 (GP) and its syngenic lines (CB5Lm(e)-1, CB5Lm-2 and CB5Lm-5) using alpha- and beta-naphthylacetate separately as nonspecific substrates (Ogita, Z., Kasai, T., 1965. Genetico-biochemical analysis of specific esterases in Musca domestica. Jpn. J. Genet. 40, 173-184). Polymorphism existed in the isozyme pattern of alpha-esterase with two or three bands in digestive juice and three to five bands in haemolymph. No polymorphism was observed in beta-esterase isozyme pattern having four bands in digestive juice and two bands in haemolymph. During the course of esterase isozyme studies, the presence of some specific alpha-esterase bands (Est-1, 4 and 5) in haemolymph and beta-esterase bands (Est-1, 2 and 3) in digestive juice were observed. But both alpha- and beta-esterase bands Est-3 and 4 in digestive juice and Est-2 and 3 in haemolymph were found to be nonspecific. Nonspecific beta-esterase band (Est-3) in haemolymph of CB5 (GP) and its syngenic lines withstood a temperature up to 80+/-1 degrees C for 10 min. No thermostable band was observed in the isozyme zymogram of alpha-esterase in digestive juice and haemolymph or beta-esterase in digestive juice. Overall, this study discusses the presence of esterase heterogeneity in the CB5 (GP) genepool, syngenic lines development, occurrence of specific alpha- and beta-esterase bands in digestive juice and haemolymph and thermostable beta-esterase band Est-3 in haemolymph in tropical silkworm Bombyx mori L.

Neuroendocrine responses of flight cadets during midterm tests and of fighter pilots during tail chase sorties.

Urinary excretion of catecholamines (CA), epinephrine (E), and norepinerphrine (NE) was determined in flight cadets (n = 46) during mid-term test sorties and was compared with the measures of these variables in fighter pilots (n = 65) during tail chase sorties. Flight cadets were divided into passed and failed cadets. Fighter pilots were divided into superior, above average, and average with flying ratings of > 7, 6-7, and <6, respectively, and with flying experience of 2050 +/- 1081 h, 884 +/- 575 h, and 616 +/- 756 h, respectively. CA excretion data showed significant intra- and intergroup differences. Excretion rates for CA and NE before and after flight were significantly higher in flight cadets than in fighter pilots. After flight, all the preflight urinary variables increased significantly in passed flight cadets, while changes in failed flight cadets were not significant. In all groups of fighter pilots, preflight excretion rates for CA, E, and NE rose postflight, but the differences within the groups were not significant. The NE/E ratio decreased significantly as a function of flight adaptation. The pre- and postflight NE/E ratios were lower in fighter pilots than in flight cadets. The delta NE/E ratio decreased in fighter pilots, but increased in flight cadets. The preflight NE/E ratio was smaller for superior than for above average and average fighter pilots, and for passed than for failed flight cadets. The postflight NE/E ratio did not show any significant differences within the groups. In superior fighter pilots, the delta NE/E ratio remained relatively stable, while it was reduced in above average and average fighter pilots.(ABSTRACT TRUNCATED AT 250 WORDS)

A new phosphate-selective sorbent for the Rem Nut process. Laboratory investigation and field experience at a medium size wastewater treatment plant.

P-control technologies for municipal wastewater are essentially based on "destructive" methods, that lead to formation of concentrated solid-phases (sludge), usually disposed-off in controlled landfills. Ion exchange, as a "non-destructive" technology, allows for selective removal and simultaneous recovery of pollutants, which can be recycled to the same and/or related productive lines. In this context, the REM NUT process removes nutrient species (HPO4 = , NH4+, K+) present in biologically oxidised municipal effluents and recovers them in the form of struvites (MgNH4PO4; MgKPO4), premium quality slow release fertilisers. The main limitation to the extensive application of this ion exchange based process is the non-availability of selective exchangers for specific removal of nutrient species. This paper illustrates laboratory investigation and pilot scale development of a so-called "P-driven" modified REM NUT scheme based on a new phosphate-selective sorbent developed at Lehigh University, PA, USA.

Industrial workstation design: a systematic ergonomics approach.

For the design of an industrial workstation, ergonomics guidelines are presented in a systematic manner. The guidelines provide a conceptual basis for a good workstation design. In a real world design situation, the implementation of the recommendations or guidelines needs the matching of the population anthropometry with the various components of the workstation. Adequate posture, work height, normal and maximum working areas, lateral clearance and visual requirement are determined for the intended user population. The procedure for determining the workstation dimensions and layout has been explained. The importance of building a mock-up of the designed workstation and its evaluation with representative subjects is emphasized. A case problem (supermarket checkstand workstation) is discussed to illustrate the workstation design procedure.

Evaluation of low back pain risks in a beef skinning operation.

The low back pain risks in a beef skinning operation at a high stand kill floor workstation was evaluated. The increases in compressive forces at lower back (L5/S1) between normal slump (back angle 25 degrees, measured in the sagittal plane) and severe (45 degrees ) and between normal slump and very severe (70 degrees ) bent back postures were 387 N or 28% and 616 N or 45%, respectively. The high spine load coupled with high level of repetition can have a high probability of fatigue failure in the spine structural members. Non-neutral back posture for a large portion of the total work time can be a low back pain risk factor. The videotape analysis showed that the times involved during the task performance for the bent back (more than 25 degrees ) and severe bent back (more than 45 degrees ) were 48.4 and 33.5% of the total cycle time, respectively. The upper limit from OWAS (Ovako Working Posture Analysis System) for bent back posture is 30% of the total cycle time. The bent and twisted back posture (both more than 25 degrees ) time was 10.4% compared to OWAS limit of 5%. This indicated that actions are needed in the near future to alleviate the risk of low back pain. Ergonomics redesign of the workstation was recommended for the operation.

Maximum reach envelope for the seated and standing male and female for industrial workstation design.

Maximum reach envelopes for the 5th, 50th and 95th percentile reach lengths of males and females in seated and standing work positions were determined. The use of a computerized potentiometric measurement system permitted functional reach measurement in 15 min for each subject. The measurement system captured reach endpoints in a dynamic mode while the subjects were describing their maximum reach envelopes. An unbiased estimate of the true reach distances was made through a systematic computerized data averaging process. The maximum reach envelope for the standing position was significantly (p<0.05) larger than the corresponding measure in the seated position for both the males and females. The average reach length of the female was 13.5% smaller than that for the corresponding male. Potential applications of this research include designs of industrial workstations, equipment, tools and products.

Correlation and regression studies between pupal weight and fecundity of muga silkworm Antheraea assama Westwood (Lepidoptera: Saturniidae) on four different foodplants.

Female pupal weight and fecundity of mother moth of Antheraea assama Westwood fed with four different food plants have been studied. Litsaea polyantha fed females showed significantly higher pupal weight and higher rate of oviposition in comparison to three food plants Machilus bombycina, Litsaea salicifolia and Cinnamomum glaucescens. The number of eggs laid was correlated with the pupal weight. The correlation co-efficient (r = 0.9730) showed positive and significant correlation at 1% level. The pupal weight was found to be the best and genuine estimator of fecundity.

Computer-aided human modelling programs for workstation design.

In designing a workstation, computer-aided human modelling programs can be used advantageously to analyse human-fit to the workstation components. The analysis is performed within a three-dimensional computer graphics environment. To illustrate the current state of development, six representative programs were selected: CYBERMAN, COMBIMAN, CREW CHIEF, JACK, SAMMIE, and MANNEQUIN. The programs differ considerably in terms of system requirement, operating characteristics, applicability and the various ergonomic evaluation functions available in the human modelling programs. The comparative analysis of the programs will aid the user to select the appropriate program for a particular workstation design.

Search for potential psychotropic agents. Part II. N-benzylidene derivatives of 4-arylpiperazine-1-acetic acid hydrazides.

The authors in all have snythesised 24 new N-benzylidene derivatives of 4-arylpiperazine-1-acetic acid hydrazides as potent psychotropic agents. Six compounds subjected to pharmacological activity failed to show any significant activity.

Comparative assessment of light-cured resin-modified glass ionomer and composite resin adhesives: in vitro study of a new adhesive system.

The ideal adhesive system is one that prevents decalcifications and has sufficient bond strength to withstand untimely impact forces on bonded brackets. The purpose of this investigation was to study and compare the bond strengths and adhesive remnant indexes of light-cured resin-modified glass ionomer and conventional resin adhesives. A new light-cured resin-modified glass ionomer adhesive was compared with the conventional adhesive systems. The effects of the new adhesive, with a system of etching and using adhesive promoters on the tooth enamel, as well as microetching the brackets, were analyzed. Comparisons were made (analysis of variance and the Tukey method) between this and other adhesive systems. The new adhesive system is indicated where prevention of decalcification and increased bond strength in noncompliant patients are indicated.

Su(z)12, a novel Drosophila Polycomb group gene that is conserved in vertebrates and plants.

In both Drosophila and vertebrates, spatially restricted expression of HOX genes is controlled by the Polycomb group (PcG) repressors. Here we characterize a novel Drosophila PcG gene, Suppressor of zeste 12 (Su(z)12). Su(z)12 mutants exhibit very strong homeotic transformations and Su(z)12 function is required throughout development to maintain the repressed state of HOX genes. Unlike most other PcG mutations, Su(z)12 mutations are strong suppressors of position-effect variegation (PEV), suggesting that Su(z)12 also functions in heterochromatin-mediated repression. Furthermore, Su(z)12 function is required for germ cell development. The Su(z)12 protein is highly conserved in vertebrates and is related to the Arabidopsis proteins EMF2, FIS2 and VRN2. Notably, EMF2 is a repressor of floral homeotic genes. These results suggest that at least some of the regulatory machinery that controls homeotic gene expression is conserved between animals and plants.