RESUMEN
BACKGROUND: Poverty is associated with inferior psychosocial outcomes, higher rates of relapse, and decreased overall survival in children with cancer. Despite this, there are few evidence-based, poverty-targeted interventions and none specific to pediatric oncology. To address this gap, we developed and refined the Pediatric Cancer Resource Equity (PediCARE) intervention, a household material hardship (HMH) targeted intervention providing transportation and groceries to pediatric oncology families. METHODS: This was a single-arm pilot study conducted at a single, large, tertiary pediatric cancer center. Newly diagnosed patients with HMH-exposure were directly assigned to receive PediCARE for a total of three months. Quantitative and qualitative approaches were used to evaluate its acceptability and to rapidly refine the intervention. RESULTS: Nine families (100% of those approached) consented to enrollment with no attrition over the three-month study period. Families were highly satisfied with the intervention and recommended participation to others. All of the families utilized the grocery delivery component of PediCARE, and seven utilized the transportation component. Qualitative participant feedback was used to rapidly refine the intervention including logistics of intervention delivery, and dose of intervention components. CONCLUSION: PediCARE, a poverty-targeted intervention, was highly acceptable to pediatric oncology families. The intervention was refined in real-time utilizing quantitative and qualitative feedback. Next steps include intervention evaluation in a randomized, controlled feasibility study.
Asunto(s)
Neoplasias , Pobreza , Niño , Estudios de Factibilidad , Humanos , Oncología Médica , Neoplasias/terapia , Proyectos PilotoRESUMEN
Previously, it has been shown that following muscle unloading, males and females experience different maladaptations in neuromuscular function. As a follow-up, the present investigation sought to determine if male and female neuromuscular systems demonstrated similar, or disparate morphological adaptations to muscle unloading. Twenty young adult male, and 20 young adult female rats were randomly assigned to one of two treatment protocols: muscle unloading, or control conditions. Following the 2-week intervention period, immunofluorescent procedures were used to quantify pre- and post-synaptic features of neuromuscular junctions (NMJs), and to assess myofiber profiles (size and fiber type composition) of the soleus, plantaris, and EDL muscles. A 2-way ANOVA with main effects for sex and treatment was then used to identify statistically significant (p ≤ .05) differences among structural parameters. Analysis of NMJs showed a consistent lack of differences between males and females. Overall, NMJs were also found to be resistant to the effects of unloading. When examining myofiber profiles, however, male myofibers were revealed to be significantly larger than female ones in each of the muscles examined. Unloading resulted in significant myofiber atrophy only in the primarily weight-bearing soleus muscle. Only the EDL showed unloading-induced differences in myofiber type distribution (Type II â I). These data indicate that different components of the neuromuscular system (NMJs, myofibers) respond uniquely to unloading, and that sex affects myofiber type profiles, but not NMJs. Moreover, it appears that only muscles that have their habitual activity patterns disturbed by unloading (i.e., the soleus, adapt to that intervention).
Asunto(s)
Adaptación Fisiológica/fisiología , Fibras Musculares Esqueléticas/fisiología , Músculo Esquelético/fisiología , Unión Neuromuscular/fisiología , Caracteres Sexuales , Análisis de Varianza , Animales , Femenino , Masculino , Distribución Aleatoria , Ratas , Ratas Wistar , Soporte de Peso/fisiologíaRESUMEN
BACKGROUND: The aim of this prospective randomized study was to compare the efficacy of 3 injection methods, intra-articular injection, subacromial injection, and hydrodilatation (HD), in the treatment of primary frozen shoulder. METHODS: Patients with primary frozen shoulder were randomized to undergo intra-articular injection (n = 29), subacromial injection (n = 29), or HD (n = 28). Evaluations using a visual analog scale for pain, Simple Shoulder Test, Constant score, and passive range of shoulder motion were completed before treatment and 1 month, 3 months, and 6 months after treatment. RESULTS: Among the 3 injection methods for primary frozen shoulder, HD resulted in a greater range of motion in forward flexion and external rotation, a lower visual analog scale score for pain after 1 month, and better outcomes for all functional scores after 1 month and 3 months of follow-up. However, there were no significant differences in any clinical outcomes among the 3 groups in the final follow-up at 6 months. CONCLUSIONS: Although HD yielded more rapid improvement, the 3 injection methods for primary frozen shoulder resulted in similar clinical improvement in the final follow-up at 6 months.
Asunto(s)
Bursitis/terapia , Cloruro de Sodio/administración & dosificación , Triamcinolona/administración & dosificación , Acromion , Bursitis/fisiopatología , Femenino , Estudios de Seguimiento , Humanos , Inyecciones Intraarticulares/métodos , Masculino , Persona de Mediana Edad , Estudios Prospectivos , Rango del Movimiento Articular , Articulación del HombroRESUMEN
INTRODUCTION: Rotator cuff tear (RCT) is a challenging and common musculoskeletal disease. Magnetic resonance imaging (MRI) is a commonly used diagnostic modality for RCT, but the interpretation of the results is tedious and has some reliability issues. In this study, we aimed to evaluate the accuracy and efficacy of the 3-dimensional (3D) MRI segmentation for RCT using a deep learning algorithm. METHODS: A 3D U-Net convolutional neural network (CNN) was developed to detect, segment, and visualize RCT lesions in 3D, using MRI data from 303 patients with RCTs. The RCT lesions were labeled by two shoulder specialists in the entire MR image using in-house developed software. The MRI-based 3D U-Net CNN was trained after the augmentation of a training dataset and tested using randomly selected test data (training: validation: test data ratio was 6:2:2). The segmented RCT lesion was visualized in a three-dimensional reconstructed image, and the performance of the 3D U-Net CNN was evaluated using the Dice coefficient, sensitivity, specificity, precision, F1-score, and Youden index. RESULTS: A deep learning algorithm using a 3D U-Net CNN successfully detected, segmented, and visualized the area of RCT in 3D. The model's performance reached a 94.3% of Dice coefficient score, 97.1% of sensitivity, 95.0% of specificity, 84.9% of precision, 90.5% of F1-score, and Youden index of 91.8%. CONCLUSION: The proposed model for 3D segmentation of RCT lesions using MRI data showed overall high accuracy and successful 3D visualization. Further studies are necessary to determine the feasibility of its clinical application and whether its use could improve care and outcomes.
Asunto(s)
Aprendizaje Profundo , Lesiones del Manguito de los Rotadores , Humanos , Imagenología Tridimensional/métodos , Lesiones del Manguito de los Rotadores/diagnóstico por imagen , Procesamiento de Imagen Asistido por Computador/métodos , Algoritmos , Imagen por Resonancia Magnética/métodosRESUMEN
The face is one of the most important parts of the body. Untreated facial fractures can result in deformities that can be harmful to patients. Three-dimensional (3D) printing is a rapidly evolving technology that has recently been widely applied in the medical field as it can potentially improve patient treatment. Although 3D printing technology is mostly used for craniofacial surgery, some studies have proved that it can be used to treat nasoethmoid orbital fractures. In this study, a patient-customized plate was constructed using a 3D printer and applied in a simulated surgery for the treatment of nasoethmoid orbital fracture.
RESUMEN
Objective: To prospectively evaluate the effect of a computed tomography (CT)-based three-dimensional (3D) printing surgical guide on surgical accuracy of tibial plateau leveling osteotomy (TPLO). Study Design: Cadaveric study. Animals: Canine cadaveric hindlimbs (n = 14). Methods: TPLO was performed on cadaver hindlimbs disarticulated at the coxofemoral joint to compare and evaluate the conventional TPLO method (n = 7) with one that used customized 3D printing surgical guides (n = 7). The operation time and postoperative tibial plateau angle (TPA) of the osteotomy were evaluated. Moreover, the osteotomy inclination, torsion, and distance and the direction of eccentricity were assessed using CT reconstruction. Results: Significant differences in the operation time (p < 0.001), postoperative TPA (p < 0.05), osteotomy inclination (p < 0.05), and osteotomy torsion (p < 0.05) were observed. Conclusion: The use of TPLO surgical guide reduced the operation time and inaccurate osteotomy. Clinical Significance: The surgical technique applied with a customized 3D printing surgical guide could be used to perform osteotomy and TPA adjustment more precisely than conventional TPLO.
RESUMEN
PURPOSE: To compare filter tilt and filter jumping during Option inferior vena cava (IVC) filter deployment with 3 different wires techniques using a 3-dimensional (3D) printing vena cava phantom. MATERIALS AND METHODS: An IVC 3D printed vena cava phantom was made from a healthy young male's computed tomographic data. Option IVC filters were deployed with 3 different wires: i) original push wire, ii) hydrophilic stiff wire, and iii) bent stiff wire. Right internal jugular and right femoral access were used 5 times with each wire. Filter tilt angle, tilt ratio, jumping, and tip abutment to the IVC wall were analyzed. RESULTS: The transfemoral approach with original push wire had significantly higher tilt angle than did the transjugular approach (6.1Ë ± 1.9 vs. 3.5Ë ± 1.3, p = 0.04). Mean tilt ratio was significantly lower with the bent wire with transfemoral access (0.49 ± 0.13 vs. 0.78 ± 0.18 [original push-wire] and 0.67 ± 0.08 [stiff wire], p = 0.019). The ratio was lower also with original push wire with transjugular access (0.34 ± 0.19 vs. 0.57 ±0.11 [stiff wire] and 0.58 ±0.17 [bent wire], p = 0.045). Filter jumping occurred more often with the transjugular approach with original push wire than with stiff or bent-wire delivery. Filter tip abutment to the IVC wall occurred only with the transfemoral approach. CONCLUSIONS: Bent wire with transfemoral access and original push wire with transjugular access had lower filter tilt ratio at Option IVC filter deployment. However, filter jumping was common using the original push wire with transjugular access.
RESUMEN
Currently, research based on the technology and applications of 3D printing is being actively pursued. 3D printing technology, also called additive manufacturing, is widely and increasingly used in the medical field. This study produced custom casts for the treatment of mallet finger using plaster of Paris, which was traditionally used in clinical practice, and 3D printing technology, and evaluated their advantages and disadvantages for patients by conducting a wearability assessment. Mallet finger casts produced using plaster of Paris, when incorrectly made, can result in skin necrosis and other problems for patients. These problems can be mitigated, however, by creating casts using 3D printing technology. Additionally, plaster casts or ready-made alternatives can be inconvenient with respect to rapid treatment of patients. In contrast, 3D-printed casts appear to provide patients with appropriate treatment and increase their satisfaction because they are small in size, custom-made for each patient, and can be quickly made and immediately applied in clinical practice.
Asunto(s)
Traumatismos de los Dedos/terapia , Deformidades Adquiridas de la Mano/terapia , Impresión Tridimensional , Férulas (Fijadores) , Sulfato de Calcio/uso terapéutico , Traumatismos de los Dedos/fisiopatología , Dedos/fisiopatología , Deformidades Adquiridas de la Mano/fisiopatología , Humanos , Satisfacción del PacienteRESUMEN
Radiotherapy (RT) is an effective treatment for managing breast cancer patients with breast conserving surgery, but patients may experience radiation-induced shoulder problems. Even though the course of shoulder morbidity is unknown, pectoral muscle changes after radiotherapy can be a major cause of shoulder problems. Twenty-two patients treated with RT for unilateral breast cancer were included in the study. All patients underwent serial computed tomography (CT) imaging before and immediately after RT, as well as 2 months, 6 months, 2 years, and 3-4 years after RT. These CT scans were used to compare muscle volume changes. The pectoral muscle volume and muscle volume surrounding the scapular measurement was performed using 3D modelling after segmentation of the CT scans. In all patients, the pectoral muscle volume increased during the 2 months after RT, and there was continuous volume reduction from 2-48 months after RT. Changes in muscle volume ratio over time were analysed by repeated measure ANOVA and it was found that there was a significant change in the pectoral muscle volume (p < 0.001) from Just before RT and Immediately after RT at 2 month after RT. On the other hand, the changes in the muscle volume of the surrounding scapular were not significant.
Asunto(s)
Neoplasias de la Mama/radioterapia , Músculos Pectorales/diagnóstico por imagen , Músculos Pectorales/efectos de la radiación , Radioterapia/efectos adversos , Dolor de Hombro/etiología , Adulto , Neoplasias de la Mama/fisiopatología , Femenino , Estudios de Seguimiento , Humanos , Imagenología Tridimensional , Persona de Mediana Edad , Órganos en Riesgo , Músculos Pectorales/fisiología , Traumatismos por Radiación/etiología , Estudios Retrospectivos , Tomografía Computarizada por Rayos XRESUMEN
Ear reconstruction using three-dimensional (3D) printing technique has been considered as a good substitute for conventional surgery, because it can provide custom-made 3D framework. However, there are difficulties with its application in clinical use. Researchers have reported 3D scaffolds for ear cartilage regeneration, but the designs of the 3D scaffolds were not appropriate to be used in surgery. Hence, we propose the design of an ideal 3D ear scaffold for use in ear reconstruction surgery. Facial computed tomography (CT) images of the unaffected ear were extracted using a "segmentation" procedure. The selected data were converted to a 3D model and mirrored to create a model of the affected side. The design of 3D model was modified to apply to Nagata's two-stage surgery. Based on the 3D reconstructed model, a 3D scaffold was 3D printed using polycaprolactone. The 3D scaffold closely resembled the real cartilage framework used in current operations in terms of ear anatomy. To account for skin thickness, the 3D scaffold was made 4 mm smaller than the real ear. Furthermore, 2 mm pores were included to allow the implantation of diced cartilage to promote regeneration of the cartilage. 3D printing technology can overcome the limitations of previous auricular reconstruction methods. Further studies are required to achieve a functional and stable substitute for auricular cartilage and to extend the clinical use of the 3D-printed construct. Additionally, the ethical and legal issues regarding the transplantation of 3D-printed constructs and cell culture technologies using human stem cells remain to be solved. © 2018 Wiley Periodicals, Inc. J Biomed Mater Res Part B: Appl Biomater 107B: 1295-1303, 2019.
Asunto(s)
Cartílago Auricular/química , Poliésteres/química , Impresión Tridimensional , Andamios del Tejido/química , Humanos , Procedimientos de Cirugía PlásticaRESUMEN
We report a multimodal biomicroscopic system which offers high-frequency ultrasound B-mode, acoustic radiation force impulse (ARFI), and multispectral imaging for qualitative tumor characterization ex vivo. Examinations of resected tissues from diseased regions such as tumors are crucial procedures during surgical operations to treat cancer. Particularly, if tiny tumors remain at surgical sites after tumor resection, such tumors can result in unwanted outcomes, such as cancer recurrence or metastasis to other organs. To avoid this, accurate characterizations of tumors resected during surgery are necessary. To this end, we devised a multimodal biomicroscopic system including high-frequency ultrasound B-mode, ARFI, and multispectral imaging modalities to examine resected tumors with high levels of accuracy. This system was evaluated with tissue-mimicking phantoms with different mechanical properties. In addition, colorectal tumors excised from cancer patients were examined. The proposed system offers highly resolved anatomical, mechanical, chemical information pertaining to tumors, thus allowing the detection of tumor regions from the surface to deep inside tissues. These results therefore suggest that the multimodal biomicroscopic system has the potential to undertake qualitative characterizations of excised tumors ex vivo.
Asunto(s)
Microscopía Acústica/instrumentación , Imagen Multimodal/instrumentación , Neoplasias/diagnóstico por imagen , Fenómenos Biomecánicos , Diseño de Equipo , Humanos , Microscopía Acústica/métodos , Imagen Multimodal/métodos , Neoplasias/patología , Neoplasias/fisiopatología , Neoplasias/cirugía , Fantasmas de ImagenRESUMEN
We described 3D printing technique and automated design software and clinical results after the application of this AFO to a patient with a foot drop. After acquiring a 3D modelling file of a patient's lower leg with peroneal neuropathy by a 3D scanner, we loaded this file on the automated orthosis software and created the "STL" file. The designed AFO was printed using a fused filament fabrication type 3D printer, and a mechanical stress test was performed. The patient alternated between the 3D-printed and conventional AFOs for 2 months. There was no crack or damage, and the shape and stiffness of the AFO did not change after the durability test. The gait speed increased after wearing the conventional AFO (56.5 cm/sec) and 3D-printed AFO (56.5 cm/sec) compared to that without an AFO (42.2 cm/sec). The patient was more satisfied with the 3D-printed AFO than the conventional AFO in terms of the weight and ease of use. The 3D-printed AFO exhibited similar functionality as the conventional AFO and considerably satisfied the patient in terms of the weight and ease of use. We suggest the possibility of the individualized AFO with 3D printing techniques and automated design software.
RESUMEN
We aimed to estimate the interrelation between preoperative deltoid muscle status by measuring the 3-dimensional deltoid muscle volume and postoperative functional outcomes after reverse total shoulder arthroplasty(RTSA). Thirty-five patients who underwent RTSA participated in this study. All patients underwent preoperative magnetic resonance imaging(MRI) as well as pre- and postoperative radiography and various functional outcome evaluations at least 1 year. The primary outcome parameter was set as age- and sex-matched Constant scores. The 3-dimensional deltoid muscle model was generated using a medical image processing software and in-house code, and the deltoid muscle volume was calculated automatically. Various clinical and radiographic factors comprising the deltoid muscle volume adjusted for body mass index(BMI) were analyzed, and their interrelation with the outcome parameters was appraised using a multivariate analysis. As a result, all practical consequences considerably improved following surgery(all p<0.01). Overall, 20 and 15 indicated a higher and a lower practical consequence than the average, respectively, which was assessed by the matched Constant scores. The deltoid muscle volume adjusted for BMI(p = 0.009), absence of a subscapularis complete tear (p = 0.040), and greater change in acromion-deltoid tuberosity distance(p = 0.013) were associated with higher matched Constant scores. Multivariate analysis indicated that the deltoid muscle volume was the single independent prognostic factor for practical consequences(p = 0.011). In conclusion, the preoperative deltoid muscle volume significantly affected the functional outcome following RTSA in patients with cuff tear arthropathy or irreparable cuff tears. Therefore, more attention should be paid to patients with severe atrophied deltoid muscle who are at a high risk for poor practical consequences subsequent to RTSA.
Asunto(s)
Artroplastía de Reemplazo de Hombro , Músculo Deltoides/patología , Artropatía por Desgarro del Manguito de los Rotadores/cirugía , Anciano , Anciano de 80 o más Años , Músculo Deltoides/diagnóstico por imagen , Músculo Deltoides/fisiopatología , Femenino , Humanos , Masculino , Contracción Muscular , Tamaño de los Órganos , Rango del Movimiento Articular , Recuperación de la Función , Artropatía por Desgarro del Manguito de los Rotadores/diagnóstico por imagen , Articulación del Hombro/diagnóstico por imagen , Articulación del Hombro/fisiopatología , Articulación del Hombro/cirugía , Resultado del TratamientoRESUMEN
PURPOSE: Radiographic measurements using two-dimensional (2D) plain radiographs or planes from computed tomography (CT) scans have several drawbacks, while measurements using images of three-dimensional (3D) reconstructed bone models can provide more consistent anthropometric information. We compared the consistency of results using measurements based on images of 3D reconstructed bone models (3D measurements) with those using planes from CT scans (measurements using 2D slice images). METHODS: Ninety-six of 561 patients who had undergone deep vein thrombosis-CT between January 2013 and November 2014 were randomly selected. We evaluated measurements using 2D slice images and 3D measurements. The images used for 3D reconstruction of bone models were obtained and measured using [Formula: see text] and [Formula: see text] (Materialize, Leuven, Belgium). RESULTS: The mean acetabular inclination, acetabular anteversion and femoral anteversion values on 2D slice images were 42.01[Formula: see text], 18.64[Formula: see text] and 14.44[Formula: see text], respectively, while those using images of 3D reconstructed bone models were 52.80[Formula: see text], 14.98[Formula: see text] and 17.26[Formula: see text]. Intra-rater reliabilities for acetabular inclination, acetabular anteversion, and femoral anteversion on 2D slice images were 0.55, 0.81, and 0.85, respectively, while those for 3D measurements were 0.98, 0.99, and 0.98. Inter-rater reliabilities for acetabular inclination, acetabular anteversion and femoral anteversion on 2D slice images were 0.48, 0.86, and 0.84, respectively, while those for 3D measurements were 0.97, 0.99, and 0.97. CONCLUSION: The differences between the two measurements are explained by the use of different tools. However, more consistent measurements were possible using the images of 3D reconstructed bone models. Therefore, 3D measurement can be a good alternative to measurement using 2D slice images.
Asunto(s)
Fémur/diagnóstico por imagen , Imagenología Tridimensional/métodos , Procedimientos de Cirugía Plástica/métodos , Tomografía Computarizada por Rayos X/métodos , Acetábulo/cirugía , Anciano , Femenino , Fémur/cirugía , Humanos , Masculino , Persona de Mediana Edad , Orientación Espacial , Radiografía , Valores de Referencia , Reproducibilidad de los Resultados , Trombosis de la Vena/diagnóstico por imagenRESUMEN
Since the imbalance of the nasal cavities due to nasal septal deviation (NSD) is a commonly observed anatomic variation in healthy adults, clinicians must often decide whether or not it is clinically relevant to the symptoms of nasal airway obstruction (NAO). Main reason for this is a lack of data correlating the symptoms of NAO with objective findings. The aim of our study is to find the correlation between fluid dynamic parameters and the anatomy of nasal cavity with NSD by numerical simulation. We generated 6 computational models of nasal cavities with NSD were created from computed tomographic images: 3 symptomatic patients with NAO and 3 asymptomatic patients. Computational fluid dynamics (CFD) was used to simulate steady inspiratory airflows in each nasal cavity model and compare the fluid dynamic properties of each. In the symptomatic cases, the pressure drop from the naris to the end of the septum was larger, and more uneven flow partitioning was observed. Local maximum velocity and wall shear stress were higher in the symptomatic group than in the asymptomatic group. The symptoms of NAO seem to be related more to the nasal resistance from the naris to the end of the septum than to the total nasal resistance from naris to nasopharynx. Factors correlated with NAO by CFD can be used as elements in patient-specific objective diagnostic tools for NAO in the presence of NSD.
Asunto(s)
Hidrodinámica , Cavidad Nasal/fisiopatología , Obstrucción Nasal/patología , Obstrucción Nasal/fisiopatología , Tabique Nasal/fisiopatología , Simulación por Computador , Lateralidad Funcional , Humanos , Modelos Biológicos , Cavidad Nasal/diagnóstico por imagen , Tabique Nasal/diagnóstico por imagen , Estadística como Asunto , Estrés Fisiológico , Tomografía Computarizada por Rayos XRESUMEN
PURPOSE: The purpose of this study was to evaluate the ability of 4 liquid boluses to enhance pixel brightness and the ease with which the boluses could be identified during the sonographic evaluation of oral swallowing in healthy young adults. METHODS: Ten healthy adult volunteers (5 men and 5 women), ranging in age from 21 to 31 years, underwent sonographic evaluation of the oral phase of swallowing while sitting in their usual feeding position. We compared the ability of the 4 following liquids to improve sonographic visualization of swallowing with that of water: a carbonated cola beverage, 5.0 ml of Thick-It in 120 ml of water, 2.5 ml of Thick-It in 120 ml of water, and 7.5 ml of confectioners' sugar in 120 ml of water. Water was used as a control. In each case, 5 ml of the liquid was introduced into the subject's oral cavity using a syringe, and the subject was instructed to swallow. Digitized still images and recorded video sequences of sonographic examinations of the swallowing were analyzed. The brightness of the bolus image on selected digitized video frames was measured digitally using Image Analyst software. Pixel brightness within selected regions of interest for each of the test liquids was statistically compared with that for water. Seven clinicians rated the visualization of each test liquid and water on paired sonographic videotape sequences. These ratings and the level of agreement between them were statistically tested. RESULTS: Only the carbonated cola beverage demonstrated statistically greater pixel brightness than that of water on digitized video frames (p = 0.01), whereas both cola (with a moderate inter-rater agreement, kappa = 0.50) and 5.0 ml Thick-It mixed with 120 ml of water (with a fair inter-rater agreement, kappa = 0.24) were significantly better visualized on sonographic video sequences. CONCLUSIONS: The digital still-frame analysis confirmed the clinicians' ratings of bolus visualization on real-time sonography, but dynamic sonography is more important than still frames in assessing sonographic swallow media because the dynamic images more closely parallel what is seen in clinical practice. Future investigations of sonographic contrast agents for use in the examination of the oral phase of swallowing should use both static digital (still-frame) and dynamic (real-time) assessment methods, as well as expert reviewers.