CO2 Capture by Diamines in Dry and Humid Conditions: A Theoretical Approach.

This work is a mechanistic study of the CO2 reaction with diamines under both dry and wet conditions. All protic α,ω-diamines R1H1N1-(CH2)n-N2H2R2, with n = 1-5 and R1 and R2 = H and/or CH3, were investigated. Depending on the nature of the diamine, the reaction was found to follow one of two concerted asynchronous reaction mechanisms with a zwitterion hidden intermediate. Both mechanisms involved two processes. The first process consisted of a nucleophilic attack of the nitrogen N1 of the first amine group on the carbon of CO2, accompanied by the transfer of a hydrogen atom H1 from N1 to the nitrogen N2 of the second amine group, leading to the formation of a carbamate zwitterion. The subsequent process corresponds to the transfer of a hydrogen atom H2 from the second amine group N2 to an oxygen atom of CO2, thus ending the reaction by the formation of carbamic acid. The structure of the zwitterion hidden intermediate was determined using the reactive internal reaction coordinates (RIRC), a reaction pathway visualization tool, consisting of a 3D representation of the potential energy versus the internuclear distances N2-H1 and N2-H2, which correspond to the bond being formed and the bond being broken, respectively. The life span of the transitory species, i.e., the zwitterion, was found to depend on the nature of the second amine group. For primary amines, the life span of the zwitterion was "short", whereas for secondary amines, it was "long". The corresponding mechanisms were termed the "early" and "late" asynchronous mechanism, respectively. Regardless of the mechanism, the activation barriers were found to decrease with the length of the carbon chain linking the two amine groups, with an asymptotic behavior from n = 4. Involvement of a water molecule generates a significant catalytic effect for diamines with short carbon chains (n < 4), whereas for longer chain diamines, water has a slightly adverse effect.

Removal of Malachite Green Dye from Aqueous Solution by Catalytic Wet Oxidation Technique Using Ni/Kaolin as Catalyst.

In this study, natural Algerian kaolin was used as a support and impregnated with nickel at different loading amounts (2 wt.%, 5 wt.%, and 7 wt.%) in order to prepare a supported catalyst. The wet impregnation technique was used in this preparation; nickel oxide (NiO) was the active phase precursor of the catalyst, and the catalysts were designated as follows: 2%, 5%, and 7% Ni/kaolin. These catalysts were put to the test in catalytic wet peroxide oxidation (CWPO) for degrading the organic contaminant malachite green dye (MG). Analytical techniques such as FTIR spectroscopy, X-ray diffraction, BET, and X-fluorescence were used to examine the structure, morphology, and chemical composition of the support and the produced catalysts. Several parameters, including temperature, catalytic dose, metal loading, hydrogen peroxide volume, and kinetic model were systematically investigated. The combination of improved parameters resulted in a significant increase in the catalytic activity, achieving a high removal rate of MG dye of 98.87%.

Adsorption Behavior of Congo Red onto Barium-Doped ZnO Nanoparticles: Correlation between Experimental Results and DFT Calculations.

Ba-loaded ZnO nanoparticles (Ba/ZnO) were obtained by the co-precipitation process and employed as a sorbent for Congo Red (C32H22N6Na2O6S2) dye (CR). Physicochemical parameters such as particle size, pH, and contact time were checked to characterize the adsorption process. The maximum adsorption capacity of Ba/ZnO NPs for CR (1614.26 mg/g) proves its potential utility in the elimination of CR dye from wastewater. The adsorption mechanism was studied via infrared spectroscopy and density functional theory calculations. The geometrical parameters and electronic properties of the CR-Ba/ZnO complex, particularly the interaction energy, the density of states, and the charge transfer, highlighted the Ba-ion mediation in the chemical bond formation between CR and the surface. The interaction between CR and Ba-doped ZnO has found to show strong chemisorption with charge transfer between the SO3- group and adsorbed Ba2+ ion on the surface.

DFT-D4 Insight into the Inclusion of Amphetamine and Methamphetamine in Cucurbit[7]uril: Energetic, Structural and Biosensing Properties.

The host-guest interactions of cucurbit[7]uril (CB[7]) as host and amphetamine (AMP), methamphetamine (MET) and their enantiomeric forms (S-form and R-form) as guests were computationally investigated using density functional theory calculations with the recent D4 atomic-charge dependent dispersion corrections. The analysis of energetic, structural and electronic properties with the aid of frontier molecular orbital analysis, charge decomposition analysis (CDA), extended charge decomposition analysis (ECDA) and independent gradient model (IGM) approach allowed to characterize the host-guest interactions in the studied systems. Energetic results indicate the formation of stable non-covalent complexes where R-AMP@CB[7] and S-AMP@CB[7] are more stable thermodynamically than R-MET@CB[7] and S-MET@CB[7] in gas phase while the reverse is true in water solvent. Based on structural analysis, a recognition mechanism is proposed, which suggests that the synergistic effect of van der Waals forces, ion-dipole interactions, intermolecular charge transfer interactions and intermolecular hydrogen bonding is responsible for the stabilization of the complexes. The geometries of the complexes obtained theoretically are in good agreement with the X-ray experimental structures and indicate that the phenyl ring of amphetamine and methamphetamine is deeply buried into the cavity of CB[7] through hydrophobic interactions while the ammonium group remains outside the cavity to establish hydrogen bonds with the portal oxygen atoms of CB[7].

Questioning the Affinity of Electrophilic Astatine for Sulfur-containing Compounds: Unexpected Bindings Revealed.

The affinity of AtO+ for around 20 model ligands (L), carrying functionalized oxygen, sulfur, and nitrogen atoms, has been assessed through a combined experimental and theoretical methodology. Significant equilibrium constants (KL ∼ 104) have been measured for sulfur-containing compounds, in agreement with the previously highlighted, relatively stable radiolabeling of SH-containing proteins with 211At. Conversely, no interaction occurs in the aqueous phase for their oxygenated counterparts, but higher affinities (KL > 106) have been determined for nitrogen-based ligands, including aromatic nitrogen heterocycles. The quantum mechanical calculations definitively ruled out any rationale based on either the metallic character of astatine or its guessed softness; the favored interactions all involve specifically the oxygen atom of AtO+, leading to the formation of covalent O-S or O-C single bonds.

Polypyrrole-Wrapped Carbon Nanotube Composite Films Coated on Diazonium-Modified Flexible ITO Sheets for the Electroanalysis of Heavy Metal Ions.

Highly sensitive multicomponent materials designed for the recognition of hazardous compounds request control over interfacial chemistry. The latter is a key parameter in the construction of the sensing (macro) molecular architectures. In this work, multi-walled carbon nanotubes (CNTs) were deposited on diazonium-modified, flexible indium tin oxide (ITO) electrodes prior to the electropolymerization of pyrrole. This three-step process, including diazonium electroreduction, the deposition of CNTs and electropolymerization, provided adhesively-bonded, polypyrrole-wrapped CNT composite coatings on aminophenyl-modified flexible ITO sheets. The aminophenyl (AP) groups were attached to ITO by electroreduction of the in-situ generated aminobenzenediazonium compound in aqueous, acidic medium. For the first time, polypyrrole (PPy) was electrodeposited in the presence of both benzenesulfonic acid (dopant) and ethylene glycol-bis(2-aminoethylether)-tetraacetic acid (EGTA), which acts as a chelator. The flexible electrodes were characterized by XPS, Raman and scanning electron microscopy (SEM), which provided strong supporting evidence for the wrapping of CNTs by the electrodeposited PPy. Indeed, the CNT average diameter increased from 18 ± 2.6 nm to 27 ± 4.8, 35.6 ± 5.9 and 175 ± 20.1 after 1, 5 and 10 of electropolymerization of pyrrole, respectively. The PPy/CNT/NH2-ITO films generated by this strategy exhibit significantly improved stability and higher conductivity compared to a similar PPy coating without any embedded CNTs, as assessed by from electrochemical impedance spectroscopy measurements. The potentiometric response was linear in the 10-8-3 × 10-7 mol L-1 Pb(II) concentration range, and the detection limit was 2.9 × 10-9 mol L-1 at S/N = 3. The EGTA was found to drastically improve selectivity for Pb(II) over Cu(II). To account for this improvement, the density functional theory (DFT) was employed to calculate the EGTA-metal ion interaction energy, which was found to be -374.6 and -116.4 kJ/mol for Pb(II) and Cu(II), respectively, considering solvation effects. This work demonstrates the power of a subtle combination of diazonium coupling agent, CNTs, chelators and conductive polymers to design high-performance electrochemical sensors for environmental applications.

Alkyl-Modified Gold Surfaces: Characterization of the Au-C Bond.

The surface of gold can be modified with alkyl groups through a radical crossover reaction involving alkyliodides or bromides in the presence of a sterically hindered diazonium salt. In this paper, we characterize the Au-C(alkyl) bond by surface-enhanced Raman spectroscopy (SERS); the corresponding peak appears at 387 cm-1 close to the value obtained by theoretical modeling. The Au-C(alkyl) bond energy is also calculated, it reaches -36.9 kcal mol-1 similar to that of an Au-S-alkyl bond but also of an Au-C(aryl) bond. In agreement with the similar energies of Au-C(alkyl) and Au-S-(alkyl), we demonstrate experimentally that these groups can be exchanged on the surface of gold.

Some Theoretical and Experimental Insights on the Mechanistic Routes Leading to the Spontaneous Grafting of Gold Surfaces by Diazonium Salts.

The spontaneous grafting of diazonium salts on gold may involve the carbocation obtained by heterolytic dediazonation and not necessarily the radical, as usually observed on reducing surfaces. The mechanism is addressed on the basis of DFT calculations and experiments carried out under conditions where the carbocation and the radical are produced selectively. The calculations indicate that the driving force of the reaction leading from a gold cluster, used as a gold model surface, and the carbocation to the modified cluster is higher than that of the analogous reaction starting from the radical. The experiments performed under conditions of heterolytic dediazonation show the formation of thin films on the surface of gold. The grafting of a carbocation is therefore possible, but a mechanism where the cleavage of the Ar-N bond is catalyzed by the surface of gold cannot be excluded.

Efficient Covalent Modification of Multiwalled Carbon Nanotubes with Diazotized Dyes in Water at Room Temperature.

Tetrafluoroborate salts of diazotized Azure A (AA-N2+), Neutral Red (NR-N2+) and Congo Red (CR-N2+) dyes were prepared and reacted with multiwalled carbon nanotubes (MWCNTs) at room temperature, in water without any reducing agent. The as-modified MWCNTs were examined by IRATR, Raman spectroscopy, XPS, TGA, TEM, and cyclic voltammetry. The diazonium band located at ∼2350 cm-1 in the diazotized dye IR spectra vanished after attachment to the nanotubes whereas the Raman D/G peak ratio slightly increased after dye covalent attachment at a high initial diazonium/CNT mass ratio. XPS measurements show the loss of F 1s from the BF4- anion together with a clear change in the high-resolution C 1s region from the modified nanotubes. Thermogravimetric analyses proved substantial mass loadings of the organic grafts leveling off at 40.5, 34.3, and 50.7 wt % for AA, NR, and CR, respectively. High-resolution TEM pictures confirmed the presence of 1.5-7-nm-thick continuous amorphous layers on the nanotubes assigned to the aryl layers from the dyes. Cyclic voltammetry studies in acetonitrile (ACN) confirmed the grafting of the dyes; the latter retain their electrochemical behavior in the grafted state. The experimental results correlate remarkably well with quantum chemical calculations that indicate high binding energies between the dyes and the CNTs accounting for true covalent bonding (140-185 kJ/mol with the CNT-aryl distance <1.6 nm), though attachment by π stacking also contributes to obtaining stable hybrids. Finally, the pH-responsive character of the robust hybrids was demonstrated by a higher degree of protonation of Neutral Red-grafted CNTs at pH 2 compared to that of the neutral aqueous medium. This work demonstrates that diazotized dyes can be employed for the surface modification of MWCNTs in a very simple and efficient manner in water and at room temperature. The hybrids could be employed for many purposes such as optically pH-responsive materials, biosensors, and optothermal composite actuators to name a few.

Highly Selective Polypyrrole MIP-Based Gravimetric and Electrochemical Sensors for Picomolar Detection of Glyphosate.

There is a global debate and concern about the use of glyphosate (Gly) as an herbicide. New toxicological studies will determine its use in the future under new strict conditions or its replacement by alternative synthetic or natural herbicides. In this context, we designed biomimetic polymer sensing layers for the selective molecular recognition of Gly. Towards this end, complementary surface acoustic wave (SAW) and electrochemical sensors were functionalized with polypyrrole (PPy)-imprinted polymer for the selective detection of Gly. Their corresponding limits of detection were on the order of 1 pM, which are among the lowest values ever reported in literature. The relevant dissociation constants between PPy and Gly were estimated at [Kd1 = (0.7 ± 0.3) pM and Kd2 = (1.6 ± 1.4) µM] and [Kd1 = (2.4 ± 0.9) pM and Kd2 = (0.3 ± 0.1) µM] for electrochemical and gravimetric measurements, respectively. Quantum chemical calculations permitted to estimate the interaction energy between Gly and PPy film: ΔE = -145 kJ/mol. Selectivity and competitivity tests were investigated with the most common pesticides. This work conclusively shows that gravimetric and electrochemical results indicate that both MIP-based sensors are perfectly able to detect and distinguish glyphosate without any ambiguity.

A surface acoustic wave sensor functionalized with a polypyrrole molecularly imprinted polymer for selective dopamine detection.

A surface acoustic wave sensor operating at 104 MHz and functionalized with a polypyrrole molecularly imprinted polymer has been designed for selective detection of dopamine (DA). Optimization of pyrrole/DA ratio, polymerization and immersion times permitted to obtain a highly selective sensor, which has a sensitivity of 0.55°/mM (≈ 550 Hz/mM) and a detection limit of ≈ 10 nM. Morphology and related roughness parameters of molecularly imprinted polymer surfaces, before and after extraction of DA, as well as that of the non imprinted polymer were characterized by atomic force microscopy. The developed chemosensor selectively recognized dopamine over the structurally similar compound 4-hydroxyphenethylamine (referred as tyramine), or ascorbic acid,which co-exists with DA in body fluids at a much higher concentration. Selectivity tests were also carried out with dihydroxybenzene, for which an unexpected phase variation of order of 75% of the DA one was observed. Quantum chemical calculations, based on the density functional theory, were carried out to determine the nature of interactions between each analyte and the PPy matrix and the DA imprinted PPy polypyrrole sensing layer in order to account for the important phase variation observed during dihydroxybenzene injection.

Marcus Theory and Long-Range Activationless Transport in Molecular Junctions.

Intrachain transport in molecular junctions (MJs) longer than 5 nm has been modeled within the theoretical framework of Marcus theory. We show that in oligo(bisthienylbenzene)-based MJs, electronic transport involves polarons, localized on three monomers that are close to 4 nm in length. They hop and tunnel between adjacent localized sites with reorganization energies λ close to 400-600 meV and electronic coupling parameters Hab close to λ/2. As a consequence, the activation energy for intrachain transport, given by the equation ΔG* = (λ/4)(1 - 2Hab/λ)2, is close to zero, and transport along the chain is activationless, in agreement with experimental observation. On the contrary, similar calculations on conjugated oligonaphthalenefluoreneimine wires show that Hab is much less than λ/2 and predict that the activation energies for intrachain hopping between adjacent sites, close to λ/4, are ∼115 meV. This work proposes a new perspective for understanding long-range activationless transport in MJs beyond the tunneling regime.

Advancements in polyol synthesis: expanding chemical horizons and Néel temperature tuning of CoO nanoparticles.

The polyol synthesis of CoO nanoparticles (NPs) is typically conducted by dissolving and heating cobalt acetate tetrahydrate and water in diethylene glycol (DEG). This process yields aggregates of approximately 100 nm made of partially aligned primary crystals. However, the synthesis demands careful temperature control to allow the nucleation of CoO while simultaneously preventing reduction, caused by the activity of DEG. This restriction hinders the flexibility to freely adjust synthesis conditions, impeding the ability to obtain particles with varied morpho-structural properties, which, in turn, directly impact chemical and physical attributes. In this context, the growth of CoO NPs in polyol was studied focusing on the effect of the polyol chain length and the synthesis temperature at two different water/cations ratios. During this investigation, we found that longer polyol chains remove the previous limits of the method, allowing the tuning of aggregate size (20-150 nm), shape (spherical-octahedral), and crystalline length (8-35 nm). Regarding the characterization, our focus revolved around investigating the magnetic properties inherent in the synthesized products. From this point of view, two pivotal findings emerged. Firstly, we identified small quantities of a layered hydroxide ferromagnetic intermediate, which acted as interference in our measurements. This intermediate exhibited magnetic properties consistent with features observed in other publications on CoO produced in systems compatible with the intermediate formation. Optimal synthetic conditions that prevent the impurity from forming were found. This resolution clarifies several ambiguities existing in literature about CoO low-temperature magnetic behavior. Secondly, a regular relationship of the NPs' TN with their crystallite size was found, allowing us to regulate TN over ~ 80 K. For the first time, a branching was found in this structure-dependent magnetic feature, with samples of spheroidal morphology consistently having lower magnetic temperatures, when compared to samples with faceted/octahedral shape, providing compelling evidence for a novel physical parameter influencing the TN of a material. These two findings contribute to the understanding of the fundamental properties of CoO and antiferromagnetic materials.

Destructive quantum interference in meta-oligo(phenyleneethynylene) molecular wires with gold-graphene heterojunctions.

Quantum interference (QI) is well recognised as a significant contributing factor to the magnitude of molecular conductance values in both single-molecule and large area junctions. Numerous structure-property relationship studies have shown that para-connected oligo(phenyleneethynylene) (OPE) based molecular wires exemplify the impact of constructive quantum interference (CQI), whilst destructive quantum interference (DQI) effects are responsible for the orders of magnitude lower conductance of analogous meta-contacted OPE derivatives, despite the somewhat shorter effective tunnelling distance. Since molecular conductance is related to the value of the transmission function, evaluated at the electrode Fermi energy, T(EF), which in turn is influenced by the presence and relative energy of (anti)resonances, it follows that the relative single-molecule conductance of para- and meta-contacted OPE-type molecules is tuned both by the anchor group and the nature of the electrode materials used in the construction of molecular junctions (gold|molecule|gold vs. gold|molecule|graphene). It is shown here that whilst amine-contacted junctions show little influence of the electrode material on molecular conductance due to the similar electrode-molecule coupling through this anchor group to both types of electrodes, the weaker coupling between thiomethyl and ethynyl anchors and the graphene substrate electrode results in a relative enhancement of the DQI effect. This work highlights an additional parameter space to explore QI effects and establishes a new working model based on the electrode materials and anchor groups in modulating QI effects beyond the chemical structure of the molecular backbone.

Enhanced adsorptive removal of indigo carmine dye by bismuth oxide doped MgO based adsorbents from aqueous solution: equilibrium, kinetic and computational studies.

Novel doped MgO nanoadsorbents were effectively fabricated at various Bi2O3 doping concentrations (0, 2.5, 5 and 10%). DFT-D3 study showed that the doping is done by substitution of two magnesium atoms by two bismuth atoms with the creation of a vacancy of one Mg atom. TEM, SEM, EDX, BET, XRD, and FTIR were used to characterize the obtained nanostructures. The removal of indigo carmine (IC) dyes from wastewater by doped MgO nanoparticles is investigated. Experimental parameters such as the initial dye concentration, contact time, Bi2O3 doping concentration, and pH were optimized to enhance the adsorption capacity. Bi2O3 doped MgO prepared at 5% (MgOBi2) is the best adsorbent with a maximum IC adsorption capacity of 126 mg g-1 at a solution pH equal to 7.00 and contact time of 74 min. The results indicated that the adsorption process followed pseudo-second-order (PSO) reaction kinetics, and the Freundlich isotherm model gave a better goodness-of-fit than the linear Langmuir model. The FTIR study established that IC molecules are successfully adsorbed onto the surface of MgOBi2 via a chemisorption process.

Assessment of an effective quasirelativistic methodology designed to study astatine chemistry in aqueous solution.

A cost-effective computational methodology designed to study astatine (At) chemistry in aqueous solution has been established. It is based on two-component spin-orbit density functional theory calculations and solvation calculations using the conductor-like polarizable continuum model in conjunction with specific astatine cavities. Theoretical calculations are confronted with experimental data measured for complexation reactions between metallic forms of astatine (At(+) and AtO(+)) and inorganic ligands (Cl(-), Br(-) and SCN(-)). For each reaction, both 1:1 and 1:2 complexes are evidenced. The experimental trends regarding the thermodynamic constants (K) can be reproduced qualitatively and quantitatively. The mean signed error on computed Log K values is -0.4, which corresponds to a mean signed error smaller than 1 kcal mol(-1) on free energies of reaction. Theoretical investigations show that the reactivity of cationic species of astatine is highly sensitive to spin-orbit coupling and solvent effects. At the moment, the presented computational methodology appears to be the only tool to gain an insight into astatine chemistry at a molecular level.

Proton transfer from the inactive gas-phase nicotine structure to the bioactive aqueous-phase structure.

The role of water in the structural change of nicotine from its inactive form in the gas phase to its bioactive form in aqueous solution has been investigated by two complementary theoretical approaches, i.e., geometry optimizations and molecular dynamics. Structures of the lowest-energy nicotineH(+)-(H(2)O)(n) complexes protonated either on the pyridine (inactive form) or pyrrolidine (active form) ring have been calculated, as well as the free-energy barriers for the proton-transfer tautomerization between the two cycles. These structures show chains of 2-4 water molecules bridging the two protonation sites. The room-temperature free-energy barrier to tautomerization along the minimum-energy path from the pyridine to the pyrrolidine cycle drops rapidly when the number of water molecules increases from 0 to 4, but still remains rather high (16 kJ/mol with four water molecules), indicating that the proton transfer is a rather difficult and rare event. We compare results obtained through this explicit water molecule approach to those obtained by means of continuum methods. Car-Parrinello molecular dynamics (CPMD) simulations of the proton-transfer process in bulk with explicit water molecules have been conducted at room temperature. No spontaneous proton transfers have been observed during the dynamics, and biased CPMD simulations have therefore been performed in order to measure the free-energy profile of the proton transfer in the aqueous phase and to reveal the proton-transfer mechanism through water bridges. The MD bias involves pulling the proton from the pyridine ring to the surrounding bulk. Dynamics show that this triggers the tautomerization toward the pyrrolidine ring, proceeding without energy barrier. The proton transfer is extremely fast, and protonation of the pyrrolidine ring was achieved within 0.5 ps. CPMD simulations confirmed the pivotal role played by the water molecules that bridge the two protonation sites of nicotine within the bulk of the surrounding water.

Electronic spectroscopic characterization of the formation of iron(III) metal complexes: The 8-HydroxyQuinoline as ligand case study.

Synthetic siderophores derivated from 8-HydroxyQuinoline (HQ) present various biological and pharmacological activities, such as anti-neurodegenerative or anti-oxydative. However, their affinity towards iron(III) seems to depend on the position (i.e., 7 or 2) of the HQ substitution by an electron withdrawing group. Two ester-derivatives of HQ at 2- and 7-position are synthesized and their respective iron-complexation is characterized by a joined experimental and theoretical work. By investigating the stability of all the possible accessible spin states of the iron(III) complexes at density-functional theory (DFT) level, we demonstrate that the high-spin (HS) state is the most stable one, and leads to a UV/vis absorption spectrum in perfect match with experiments. From this DFT protocol, and in agreement with the experimental results, we show that the ester functionalization of HQ in 2-position weakens the formation of the iron(III) complex while its substitution in 7-position allows a salicylate coordination of the metal very close to the ideal octahedral environment.

Computational approach and electrochemical measurements for protein detection with MIP-based sensor.

Rapid and accurate detection of proteins in biological fluids is increasingly required in the biomedical environment. Actually, it is performed with conventional techniques, which are generally run by robotized platforms at centralized laboratories. In this work, molecular dynamics calculations and an experimental procedure were conducted to set up electrochemical sensors based on polypyrrol (PPy) molecular imprinted polymers (MIP) for proteins detection. Here, prostate-specific antigen (PSA) was selected as a template model. Computational calculations indicate that for any PPy conformation and any amino-acid location in the protein, PSA molecules remain strongly inserted in the PPy polymer without biological alterations. One from possible orientations, appeared to be most probable as it presents the lowest absorption energy (-363 kcal mol-1) and largest contact area (4034.1 Å2). The device was then elaborated by in situ electropolymerization of PPy films. MIP's thickness and extraction duration were optimized by chronoamperometry. Square wave voltammetry technique was investigated for PSA detection in standard solution in the concentration range of 3x10 -8 ng.ml-1- 300 ng ml-1. According to the Hill equation, the equilibrium dissociation constant Kdbetween PSA and its imprint was estimated at Kd = (1.02 ±â€¯0.54) × 10-14 M, confirming the strong binding between the designed MIP and the protein as predicted by the computational study. PSA concentration values directly measured in 35 human serum samples were found closely correlated to those measured by the ELISA technique. The promising fast and low-cost sensor might be used successfully for proteins detection at low concentrations with high selectivity and reproducibility.

Intramolecular Path Determination of Active Electrons on Push-Pull Oligocarbazole Dyes-Sensitized Solar Cells.

Several push-pull oligocarbazole dye-sensitizers have been studied using theoretical methods in order to better understand the relationship between structural electronic or optical properties and intramolecular path of active electrons during the ionization and injection processes. DFT/TD-DFT calculations were performed on a series of five dye sensitizers. They differ by the presence of electron donating group (EDG) by inductive effect (noted+I) or electron releasing group (ERG) by mesomeric effect (noted+M) or electron withdrawing group by inductive effect (noted-I) on the pushed part of the dyes studied. Our work focused on the internal distribution of electrons in the different parts of dye that are the push/pull moieties and the π-bridge. The study concerned the ground state, the electronic transition process and the excited state. In each situation, the fragment acting in the ionization or transition phenomena were identified. In the ground state, the electrons of the push part appear to be the least bound because they have the highest probabilities of ionization. In the excited state, the ionized atoms are essentially positioned in the pushing part and some neighboring atoms of the bridge. In the electronic transition, the active atoms are located in the π-conjugated part but only on the side adjacent to the acceptor group. To arrive to this conclusion, we optimized the structures of the five dyes in their ground and excited states. We calculated the atomic charges, the wavelengths and intensities of electronic transitions in the visible domain, the reorganization energies as well as the oxidation potential. It appears that +M donor ligands improve the performance of a dye because the great distribution of atoms to be ionized in the push parts.