A bright future for engineering piezoelectric 2D crystals.

The piezoelectric effect, mechanical-to-electrical and electrical-to-mechanical energy conversion, is highly beneficial for functional and responsive electronic devices. To fully exploit this property, miniaturization of piezoelectric materials is the subject of intense research. Indeed, select atomically thin 2D materials strongly exhibit the piezoelectric effect. The family of 2D crystals consists of over 7000 chemically distinct members that can be further manipulated in terms of strain, functionalization, elemental substitution (i.e. Janus 2D crystals), and defect engineering to induce a piezoelectric response. Additionally, most 2D crystals can stack with other similar or dissimilar 2D crystals to form a much greater number of complex 2D heterostructures whose properties are quite different to those of the individual constituents. The unprecedented flexibility in tailoring 2D crystal properties, coupled with their minimal thickness, make these emerging highly attractive for advanced piezoelectric applications that include pressure sensing, piezocatalysis, piezotronics, and energy harvesting. This review summarizes literature on piezoelectricity, particularly out-of-plane piezoelectricity, in the vast family of 2D materials as well as their heterostructures. It also describes methods to induce, enhance, and control the piezoelectric properties. The volume of data and role of machine learning in predicting piezoelectricity is discussed in detail, and a prospective outlook on the 2D piezoelectric field is provided.

Plasma-Induced Nanocrystalline Domain Engineering and Surface Passivation in Mesoporous Chalcogenide Semiconductor Thin Films.

The synthesis of highly crystalline mesoporous materials is key to realizing high-performance chemical and biological sensors and optoelectronics. However, minimizing surface oxidation and enhancing the domain size without affecting the porous nanoarchitecture are daunting challenges. Herein, we report a hybrid technique that combines bottom-up electrochemical growth with top-down plasma treatment to produce mesoporous semiconductors with large crystalline domain sizes and excellent surface passivation. By passivating unsaturated bonds without incorporating any chemical or physical layers, these films show better stability and enhancement in the optoelectronic properties of mesoporous copper telluride (CuTe) with different pore diameters. These results provide exciting opportunities for the development of long-term, stable, and high-performance mesoporous semiconductor materials for future technologies.

Highly Dispersed Ru Nanoparticles on Boron-Doped Ti3 C2 Tx (MXene) Nanosheets for Synergistic Enhancement of Electrocatalytic Hydrogen Evolution.

2D-layered materials have attracted increasing attention as low-cost supports for developing active catalysts for the hydrogen evolution reaction (HER). In addition, atomically thin Ti3 C2 Tx (MXene) nanosheets have surface termination groups (Tx : F, O, and OH), which are active sites for effective functionalization. In this work, heteroatom (boron)-doped Ti3 C2 Tx (MXene) nanosheets are developed as an efficient solid support to host ultrasmall ruthenium (Ru) nanoparticles for electrocatalytic HER. The quantum-mechanical first-principles calculations and electrochemical tests reveal that the B-doping onto 2D MXene nanosheets can largely improve the intermediate H* adsorption kinetics and reduce the charge-transfer resistance toward the HER, leading to increased reactivity of active sites and favorable electrode kinetics. Importantly, the newly designed electrocatalyst based on Ru nanoparticles supported on B-doped MXene (Ru@B-Ti3 C2 Tx ) nanosheets shows a remarkable catalytic activity with low overpotentials of 62.9 and 276.9 mV to drive 10 and 100 mA cm-2 , respectively, for the HER, while exhibiting excellent cycling stabilities. Moreover, according to the theoretical calculations, Ru@B-Ti3 C2 Tx exhibits a near-zero value of Gibbs free energy (ΔGH*  = 0.002 eV) for the HER. This work introduces a facile strategy to functionalize MXene for use as a solid support for efficient electrocatalysts.

1D-2D Synergistic MXene-Nanotubes Hybrids for Efficient Perovskite Solar Cells.

Incorporation of 2D MXenes into the electron transporting layer (ETL) of perovskite solar cells (PSCs) has been shown to deliver high-efficiency photovoltaic (PV) devices. However, the ambient fabrication of the ETLs leads to unavoidable deterioration in the electrical properties of MXene due to oxidation. Herein, sorted metallic single-walled carbon nanotubes (m-SWCNTs) are employed to prepare MXene/SWCNTs composites to improve the PV performance of PSCs. With the optimized composition, a power conversion efficiency of over 21% is achieved. The improved photoluminescence and reduced charge transfer resistance revealed by electrochemical impedance spectroscopy demonstrated low trap density and improved charge extraction and transport characteristics due to the improved conductivity originating from the presence of nanotubes as well as the reduced defects associated with oxygen vacancies on the surface of the SnO2 . The MXene/SWCNTs strategy reported here provides a new avenue for realizing high-performance PSCs.

Direct-Patterning SWCNTs Using Dip Pen Nanolithography for SWCNT/Silicon Solar Cells.

Dip pen nanolithography (DPN) is used to pattern single-walled carbon nanotube (SWCNT) lines between the n-type Si and SWCNT film in SWCNT/Si solar cells. The SWCNT ink composition, loading, and DPN pretreatment are optimized to improve patterning. This improved DPN technique is then used to successfully pattern >1 mm long SWCNT lines consistently. This is a 20-fold increase in the previously reported direct-patterning of SWCNT lines using the DPN technique, and demonstrates the scalability of the technique to pattern larger areas. The degree of the uniformity of SWCNTs in these lines is further characterized by Raman spectroscopy and scanning electron microscopy. The patterned SWCNT lines are used as thin conductive pathways in SWCNT/Si solar cells, similar to front contact electrodes. The critical parameters of these solar cells are measured and compared to control cells without SWCNT lines. The addition of SWCNT lines increases power conversion efficiency by 40% (relative). Importantly, the SWCNT lines reduce average series resistance by 44%, and consequently increase average fill factor by 24%.

Recent progress in magnetic nanoparticles: synthesis, properties, and applications.

The rapid development of advanced nanotechnology has continuously changed many aspects of society. One important nanostructured material, magnetic nanoparticles (NPs), has applications in many areas including clean energy, biology and engineering because of their special magnetic properties. The synthesis of magnetic nanomaterials with desired sizes and morphology has attracted great attention. Nanomaterials with different properties can be combined to construct multifunctional nanoplatforms through systematic surface engineering. The surface modification of magnetic NPs presents the opportunity for them to be used in many practical applications. Functionalized magnetic NPs have been successfully applied in catalysis, as thermoelectric materials, for drug delivery, as imaging agents in nuclear magnetic resonance and in biosensors. In this review, synthetic methods for magnetic NPs and some of their important properties are described. Then the latest progress of the application of magnetic NPs in energy and biology has been summarized and discussed. Finally, we discuss some issues that still need to be solved and the prospects for magnetic NPs.

Electrocatalytic Activity of a 2D Phosphorene-Based Heteroelectrocatalyst for Photoelectrochemical Cells.

Research into efficient synthesis, fundamental properties, and potential applications of phosphorene is currently the subject of intense investigation. Herein, solution-processed phosphorene or few-layer black phosphorus (FL-BP) sheets are prepared using a microwave exfoliation method and used in photoelectrochemical cells. Based on experimental and theoretical (DFT) studies, the FL-BP sheets are found to act as catalytically active sites and show excellent electrocatalytic activity for triiodide reduction in dye-sensitized solar cells. Importantly, the device fabricated based on the newly designed cobalt sulfide (CoSx ) decorated nitrogen and sulfur co-doped carbon nanotube heteroelectrocatalyst coated with FL-BP (FL-BP@N,S-doped CNTs-CoSx ) displayed an impressive photovoltaic efficiency of 8.31 %, outperforming expensive platinum based cells. This work paves the way for using phosphorene-based electrocatalysts for next-generation energy-storage systems.

Accurate thickness measurement of graphene.

Graphene has emerged as a material with a vast variety of applications. The electronic, optical and mechanical properties of graphene are strongly influenced by the number of layers present in a sample. As a result, the dimensional characterization of graphene films is crucial, especially with the continued development of new synthesis methods and applications. A number of techniques exist to determine the thickness of graphene films including optical contrast, Raman scattering and scanning probe microscopy techniques. Atomic force microscopy (AFM), in particular, is used extensively since it provides three-dimensional images that enable the measurement of the lateral dimensions of graphene films as well as the thickness, and by extension the number of layers present. However, in the literature AFM has proven to be inaccurate with a wide range of measured values for single layer graphene thickness reported (between 0.4 and 1.7 nm). This discrepancy has been attributed to tip-surface interactions, image feedback settings and surface chemistry. In this work, we use standard and carbon nanotube modified AFM probes and a relatively new AFM imaging mode known as PeakForce tapping mode to establish a protocol that will allow users to accurately determine the thickness of graphene films. In particular, the error in measuring the first layer is reduced from 0.1-1.3 nm to 0.1-0.3 nm. Furthermore, in the process we establish that the graphene-substrate adsorbate layer and imaging force, in particular the pressure the tip exerts on the surface, are crucial components in the accurate measurement of graphene using AFM. These findings can be applied to other 2D materials.

Carbon nanotube modified probes for stable and high sensitivity conductive atomic force microscopy.

Conductive atomic force microscopy (C-AFM) is used to characterise the nanoscale electrical properties of many conducting and semiconducting materials. We investigate the effect of single walled carbon nanotube (SWCNT) modification of commercial Pt/Ir cantilevers on the sensitivity and image stability during C-AFM imaging. Pt/Ir cantilevers were modified with small bundles of SWCNTs via a manual attachment procedure and secured with a conductive platinum pad. AFM images of topography and current were collected from heterogeneous polymer and nanomaterial samples using both standard and SWCNT modified cantilevers. Typically, achieving a good current image comes at the cost of reduced feedback stability. In part, this is due to electrostatic interaction and increased tip wear upon applying a bias between the tip and the sample. The SWCNT modified tips displayed superior current sensitivity and feedback stability which, combined with superior wear resistance of SWCNTs, is a significant advancement for C-AFM.

HIV-1 antibodies and vaccine antigen selectively interact with lipid domains.

The rare, broadly neutralizing antibodies, 4E10 and 2F5, that target the HIV-1 membrane proximal external region also associate with HIV-1 membrane lipids as part of a required first-step in HIV-1 neutralization. HIV-1 virions have high concentration of cholesterol and sphingomyelin, which are able to organize into liquid-ordered domains (i.e., lipid rafts), and could influence the interaction of neutralizing antibodies with epitopes proximal to the membrane. The objective of this research is to understand how these lipid domains contribute to 2F5/4E10 membrane interactions and to antigen presentation in liposomal form of HIV-1 vaccines. To this end we have engineered biomimetic supported lipid bilayers and are able to use atomic force microscopy to visualize membrane domains, antigen clustering, and antibody-membrane interactions. Our results demonstrate that 2F5/4E10 do not interact with highly ordered gel and liquid-ordered domains and exclusively bind to a liquid-disordered lipid phase. This suggests that vaccine liposomes that contain key viral membrane components, such as high cholesterol content, may not be advantageous for 2F5/4E10 vaccine strategies. Rather, vaccine liposomes that primarily contain a liquid-disordered phase may be more likely to elicit production of lipid reactive, 2F5- and 4E10-like antibodies.

Carbon Nanotubes for Dye-Sensitized Solar Cells.

As one type of emerging photovoltaic cell, dye-sensitized solar cells (DSSCs) are an attractive potential source of renewable energy due to their eco-friendliness, ease of fabrication, and cost effectiveness. However, in DSSCs, the rarity and high cost of some electrode materials (transparent conducting oxide and platinum) and the inefficient performance caused by slow electron transport, poor light-harvesting efficiency, and significant charge recombination are critical issues. Recent research has shown that carbon nanotubes (CNTs) are promising candidates to overcome these issues due to their unique electrical, optical, chemical, physical, as well as catalytic properties. This article provides a comprehensive review of the research that has focused on the application of CNTs and their hybrids in transparent conducting electrodes (TCEs), in semiconducting layers, and in counter electrodes of DSSCs. At the end of this review, some important research directions for the future use of CNTs in DSSCs are also provided.

Interaction of silver nanoparticles with tethered bilayer lipid membranes.

Silver nanoparticles are well-known for their antibacterial properties. However, the detailed mechanism describing the interaction between the nanoparticles and a cell membrane is not fully understood, which can impede the use of the particles in biomedical applications. Here, a tethered bilayer lipid membrane has been used as a model system to mimic a natural membrane and to study the effect of exposure to small silver nanoparticles with diameters of about 2 nm. The solid supported membrane architecture allowed for the application of surface analytical techniques such as electrochemical impedance spectroscopy and atomic force microscopy. Exposure of the membrane to solutions of the silver nanoparticles led to a small but completely reversible perturbation of the lipid bilayer.

Characterization of the comparative drug binding to intra- (liver fatty acid binding protein) and extra- (human serum albumin) cellular proteins.

1. This study compared the extent, affinity, and kinetics of drug binding to human serum albumin (HSA) and liver fatty acid binding protein (LFABP) using ultrafiltration and surface plasmon resonance (SPR). 2. Binding of basic and neutral drugs to both HSA and LFABP was typically negligible. Binding of acidic drugs ranged from minor (fu > 0.8) to extensive (fu < 0.1). Of the compounds screened, the highest binding to both HSA and LFABP was observed for the acidic drugs torsemide and sulfinpyrazone, and for ß-estradiol (a polar, neutral compound). 3. The extent of binding of acidic drugs to HSA was up to 40% greater than binding to LFABP. SPR experiments demonstrated comparable kinetics and affinity for the binding of representative acidic drugs (naproxen, sulfinpyrazone, and torsemide) to HSA and LFABP. 4. Simulations based on in vitro kinetic constants derived from SPR experiments and a rapid equilibrium model were undertaken to examine the impact of binding characteristics on compartmental drug distribution. Simulations provided mechanistic confirmation that equilibration of intracellular unbound drug with the extracellular unbound drug is attained rapidly in the absence of active transport mechanisms for drugs bound moderately or extensively to HSA and LFABP.

Use of carbon nanotubes (CNTs) with polymers in solar cells.

There is a clear need to make energy cheap, readily accessible and green, while ensuring its production does not contribute to further climate change. Of all the options available, photovoltaics offer the highest probability of delivering a meaningful and sustainable change in the way society produces its energy. One approach to the development of such photovoltaics involves the use of polymers. These systems offer the advantages of cheap production, flexibility (and hence a range of deployment opportunities) and tunability of light absorption. However, there are issues with polymer-based photovoltaic systems and one significant effort to improve these systems has involved the use of carbon nanotubes (CNTs). This review will focus on those efforts. CNTs have been used in virtually every component of the devices to help charge conduction, improve electrode flexibility and in some cases as active light absorbing materials.

Silver nanostar films for surface-enhanced Raman spectroscopy (SERS) of the pesticide imidacloprid.

Strategies for synthetic control of anisotropic metal nanostructures have grown in recent years in part due to their great potential for application as surface-enhanced Raman scattering (SERS) sensing substrates. It has been shown that SERS using silver substrates is a powerful tool for identification and qualification of trace chemical analysis on the basis of their unique molecular vibrations. In this work, we synthesized star-shaped silver nanostructures and fabricated SERS substrates to use the SERS enhancement of the Raman signal to detect neonicotinoid pesticides. These silver nanostar substrates were prepared by assembling the nanostar particles on a glass substrate surface using a self-assembly technique with various layers of silver nanostars film. The silver nanostar distribution on the solid substrate surface was found to have good reproducibility, reusability and were a stable SERS substrate giving SERS enhancements for pesticide detection at concentrations as low as 10-6 mg/ml. The distribution of these silver nanostars on the surface allowed excellent reproducibility of the detection with a low relative standard derivation (RSD) of SERS intensity of 8%. This work potentially builds a platform for an ultrasensitive detector where samples can be probed with little to no pre-processing and a range of pollutants can be detected at very low levels.

Rhenium anchored Ti3C2T x (MXene) nanosheets for electrocatalytic hydrogen production.

Atomically thin Ti3C2T x (MXene) nanosheets with rich termination groups, acting as active sites for effective functionalization, are used as an efficient solid support to host rhenium (Re) nanoparticles for the electrocatalytic hydrogen evolution reaction (HER). The newly designed electrocatalyst - Re nanoparticles anchored on Ti3C2T x MXene nanosheets (Re@Ti3C2T x ) - exhibited promising catalytic activity with a low overpotential of 298 mV to achieve a current density of 10 mV cm-2, while displaying excellent stability. In comparison, the pristine Ti3C2T x MXene requires higher overpotential of 584 mV to obtain the same current density. After being stored under ambient conditions for 30 days, Re@Ti3C2T x retained 100% of its initial catalytic activity for the HER, while the pristine Ti3C2T x retained only 74.8% of its initial value. According to our theoretical calculations using density functional theory, dual Re anchored MXene (Re@Ti3C2T x ) exhibits a near-zero value of Gibbs free energy (ΔG H* = -0.06 eV) for the HER, demonstrating that the presence of Re significantly enhances the electrocatalytic activity of MXene nanosheets. This work introduces a facile strategy to develop an effective electrocatalyst for electrocatalytic hydrogen production.

Energy Interplay in Materials: Unlocking Next-Generation Synchronous Multisource Energy Conversion with Layered 2D Crystals.

Layered 2D crystals have unique properties and rich chemical and electronic diversity, with over 6000 2D crystals known and, in principle, millions of different stacked hybrid 2D crystals accessible. This diversity provides unique combinations of properties that can profoundly affect the future of energy conversion and harvesting devices. Notably, this includes catalysts, photovoltaics, superconductors, solar-fuel generators, and piezoelectric devices that will receive broad commercial uptake in the near future. However, the unique properties of layered 2D crystals are not limited to individual applications and they can achieve exceptional performance in multiple energy conversion applications synchronously. This synchronous multisource energy conversion (SMEC) has yet to be fully realized but offers a real game-changer in how devices will be produced and utilized in the future. This perspective highlights the energy interplay in materials and its impact on energy conversion, how SMEC devices can be realized, particularly through layered 2D crystals, and provides a vision of the future of effective environmental energy harvesting devices with layered 2D crystals.

Heterointerface optimization in a covalent organic framework-on-MXene for high-performance capacitive deionization of oxygenated saline water.

Capacitive deionization (CDI) provides a promising option for affordable freshwater while simultaneously storing energy, but its large-scale application is usually limited owing to the poor performance of conventional materials in natural (oxygenated) saline water. Herein, we report heterointerface optimization in a covalent organic framework (COF)-on-MXene heterostructure achieving a high CDI performance for desalination of oxygenated saline water. The 2D heterostructure with the optimal core-shell architecture inherits the high conductivity and reversible ion intercalation/deintercalation ability of MXene, and the hierarchical porous structure, large porosity, and extraordinary redox capacity of COFs. Thanks to the heterointerface optimization, the MXene@COF heterostructure exhibits a very stable cycling performance over 100 CDI cycles with a maximum NaCl adsorption capacity of 53.1 mg g-1 in oxygenated saline water, among the state-of-the-art values for CDI electrodes and also exceeding those of most MXene-based or 2D materials. This study highlights the importance of heterointerface optimization in MXene-organic 2D heterostructures to promote CDI of natural (oxygenated) saline water.

Dual silane surface functionalization for the selective attachment of human neuronal cells to porous silicon.

Porous silicon (pSi) surfaces were chemically micropatterned through a combination of photolithography and surface silanization reactions. This patterning technique produces discretely defined regions on a pSi surface functionalized with a specific chemical functionality, and the surrounding surface displays a completely different functionality. The generated chemical patterns were characterized by a combination of IR microscopy and the conjugation of two different fluorescent organic dyes. Finally, the chemically patterned pSi surface was used to direct the attachment of neuronal cells to the surface. This patterning strategy will be useful for the development of high-throughput platforms for investigating cell behavior.

A Comparative Study on the Role of Polyvinylpyrrolidone Molecular Weight on the Functionalization of Various Carbon Nanotubes and Their Composites.

Polyvinylidene fluoride (PVDF) nanocomposites filled with polyvinylpyrrolidone (PVP) wrapped carbon nanotubes were prepared via a solution casting technique. The effect of the molecular weight (polymer chain length) of the PVP on the ability to wrap different nanotube structures and its impact towards nanotube dispersibility in the polymer matrix was explored. The study was conducted with PVP of four different molecular weights and nanotubes of three different structures. The composites that exhibit an effective nanotube dispersion lead to a nanotube network that facilitates improved thermal, electrical, and mechanical properties. It was observed that nanotubes of different structures exhibit stable dispersions in the polymer matrix though PVP functionalization of different molecular weights, but the key is achieving an effective nanotube dispersion at low PVP concentrations. This is observed in MWNT and AP-SWNT based composites with PVP of low molecular weight, leading to a thermal conductivity enhancement of 147% and 53%, respectively, while for P3-SWNT based composites, PVP of high molecular weight yields an enhancement of 25% in thermal conductivity compared to the non-functionalized CNT-PVDF composite.