Graphene oxide-polyamine preprogrammable nanoreactors with sensing capability for corrosion protection of materials.

Corrosion is one of the major issues for sustainable manufacturing globally. The annual global cost of corrosion is US$2.5 trillion (approximately 3.4% of the world's GDP). The traditional ways of corrosion protection (such as barriers or inhibiting) are either not very effective (in the case of barrier protection) or excessively expensive (inhibiting). Here, we demonstrate a concept of nanoreactors, which are able to controllably release or adsorb protons or hydroxides directly on corrosion sites, hence, selectively regulating the corrosion reactions. A single nanoreactor comprises a nanocompartment wrapped around by a pH-sensing membrane represented, respectively, by a halloysite nanotube and a graphene oxide/polyamine envelope. A nanoreactor response is determined by the change of a signaling pH on a given corrosion site. The nanoreactors are self-assembled and suitable for mass-line production. The concept creates sustainable technology for developing smart anticorrosion coatings, which are nontoxic, selective, and inexpensive.

Formation Mechanism of Multipurpose Silica Nanocapsules.

Core-shell structures containing active materials can be fabricated using almost infinite reactant combinations. A mechanism to describe their formation is therefore useful. In this work, nanoscale all-silica shell capsules with an aqueous core were fabricated by the HCl-catalyzed condensation of tetraethyl orthosilicate (TEOS), using Pickering emulsion templates. Pickering emulsions were fabricated using modified commercial silica (LUDOX TMA) nanoparticles as stabilizers. By following the reaction over a 24 h period, a general mechanism for their formation is suggested. The interfacial activity of the Pickering emulsifiers heavily influenced the final capsule products. Fully stable Pickering emulsion templates with interfacially active particles allowed a highly stable sub-micrometer (500-600 nm) core-shell structure to form. Unstable Pickering emulsions, i.e., where interfacially inactive silica nanoparticles do not adsorb effectively to the interface and produce only partially stable emulsion droplets, resulted in capsule diameter increasing markedly (1+ µm). Scanning electron microscope (SEM) and transmission electron microscope (TEM) measurements revealed the layered silica "colloidosome" structure: a thin yet robust inner silica shell with modified silica nanoparticles anchored to the outer interface. Varying the composition of emulsion phases also affected the size of capsule products, allowing size tuning of the capsules. Silica capsules are promising protective nanocarriers for hydrophilic active materials in applications such as heat storage, sensors, and drug delivery.

Confined-Volume Effect on the Thermal Properties of Encapsulated Phase Change Materials for Thermal Energy Storage.

We have encapsulated the heat exchange material, n-docosane, into polyurethane capsules of different sizes. Decreasing the size of the capsules leads to changes of the crystallinity of phase-change material as well as melting/crystallization temperature. The novelty of the paper includes 1) protection of the nanostructured energy-enriched materials against environment during storage and controlled release of the encapsulated energy on demand and 2) study of the structure and surface-to-volume properties of the energy-enriched materials dispersed in capsules of different sizes. The stability of energy nanomaterials, influence of capsule diameter on their energy capacity, homogeneity and operation lifetime are investigated.

New polyurethane/docosane microcapsules as phase-change materials for thermal energy storage.

Polyurethane microcapsules were prepared by mini-emulsion interfacial polymerization for encapsulation of phase-change material (n-docosane) for energy storage. Three steps were followed with the aim to optimize synthesis conditions of the microcapsules. First, polyurethane microcapsules based on silicone oil core as an inert template with different silicone oil/poly(ethylene glycol)/4,4'-diphenylmethane diisocyanate wt % ratio were synthesized. The surface morphology of the capsules was analyzed by scanning electronic microscopy (SEM) and the chemical nature of the shell was monitored by Fourier transform infrared spectroscopy (FT-IR). Capsules with the silicone oil/poly(ethylene glycol)/4,4'-diphenylmethane diisocyanate 10/20/20 wt % ratio showed the best morphological features and shell stability with average particle size about 4 µm, and were selected for the microencapsulation of the n-docosane. In the second stage, half of the composition of silicone oil was replaced with n-docosane and, finally, the whole silicone oil content was replaced with docosane following the same synthetic procedure used for silicone oil containing capsules. Thermal and cycling stability of the capsules were investigated by thermal gravimetric analysis (TGA) and the phase-change behavior was evaluated by differential scanning calorimetry (DSC).

Polypyrrole Microcontainers: Electrochemical Synthesis and Characterization.

We present electrochemically controlled synthesis of polypyrrole microcontainers on electrogenerated hydrogen gas bubbles acting as a template. We performed structural characterization of the obtained microcontainers to gain insight into the growth kinetics of the polypyrrole shell. Experimental results showed that surfactant-mediated polymerization of pyrrole at the hydrogen microbubble surface under controlled electrochemical biasing led to the synthesis of various micro/nanostructures. Dependent upon the electrochemical conditions, such as the number of redox cycles and scan rate, the containers with spherical globules and bowl-like structures, which become lantern-like with increasing the number of cycles, are formed, as revealed by scanning electron microscopy. Their diameter can range between 40 and 200 µm, and wall thickness can be varied from 2 to 70 µm, depending upon the electropolymerization conditions.

Precipitation polymerization for fabrication of complex core-shell hybrid particles and hollow structures.

Functional polymer micro- and nanoparticles with novel morphology are of great importance because of their wide range of applications in complex biological systems and nanotechnology. Due to the outstanding advantage of the absence of any surfactant, precipitation polymerization as a heterogeneous polymerization technique has been developed to prepare various uniform and clean polymer particles, such as microspheres, nanoparticles, core-shell particles, core-double shell particles, single-shell hollow particles, double-shell hollow particles, and rattle-type hollow nanostructures. In this review, a general introduction into the categories of precipitation polymerization and their mechanisms is presented. The precise control of particle size, size distribution, pore size, morphology and surface chemistry of micro- and nanoparticles, core-shell hybrids and polymer hollow structures is discussed. The development of complex nanostructures and their applications in separation, drug delivery and nano-reactor systems are highlighted as well.

Autonomic self-regulating systems based on polyelectrolyte microcapsules and microgel particles.

Biological systems possess unique non-equilibrium functions, maintaining tight manipulation of their surroundings through inter-communication of multiple components and self-regulatory capability organized over different length scales. However, most artificial materials are incapable of communicating and self-regulating behavior due to their limited number of component and direct responsive modes. Herein, a new integrated self-regulation system is developed utilizing stimuli-responsive polyelectrolyte capsules as building blocks. The combination of stimuli-responsive capsules and enzyme immobilized microgels is designed to mimic life systems and its programmable interactive communications and self-regulation behavior is demonstrated through communication-feedback mechanism. Polyelectrolyte capsules can sense changes of their surrounding, then start the internal communication by releasing energy-rich cargo mimicking the behavior of the cells. The microgel particles subsequently complete closed-loop communication through providing negative feedback on capsules by enzymatic reaction and actuating pH-regulation of the whole system. Different communication modes and pH-regulation behaviors could be achieved by adjusting spatial and kinetic conditions. Proposed intelligent system is highly customizable due to the wide selection of encapsulated cargos, stimuli-responsive blocks and reaction networks, and would have broad influences in areas ranging from medical implants that assist in stabilizing body functions to microreactor system that regulate catalytic reactions.

Laser Derived Electron Transport Layers with Embedded p-n Heterointerfaces Enabling Planar Perovskite Solar Cells with Efficiency over 25.

Electron transport layers (ETLs) with pronounced electron conducting capability are essential for high performance planar perovskite photovoltaics, with the great challenge being that the most widely used metal oxide ETLs unfortunately have intrinsically low carrier mobility. Herein is demonstrated that by simply addressing the carrier loss at particle boundaries of TiO2 ETLs, through embedding in ETL p-n heterointerfaces, the electron mobility of the ETLs can be boosted by three orders of magnitude. Such embedding is encouragingly favorable for both inhibiting the formation of rutile phase TiO2 in ETL, and initiating the growth of high-quality perovskite films with less defect states. By virtue of these merits, creation of formamidinium lead iodide perovskite solar cells (PSCs) with a champion efficiency of 25.05% is achieved, setting a new benchmark for planar PSCs employing TiO2 ETLs. Unencapsulated PSCs deliver much-improved environmental stability, i.e., more than 80% of their initial efficiency after 9000 h of air storage under RH of 40%, and over 90% of their initial efficiency at maximum power point under continuous illumination for 500 h. Further work exploring other p-type nanocrystals for embedding warrants the proposed strategy as a universal alternative for addressing the low-carrier mobility of metal oxide based ETLs.

Polyurethane/n-Octadecane Phase-Change Microcapsules via Emulsion Interfacial Polymerization: The Effect of Paraffin Loading on Capsule Shell Formation and Latent Heat Storage Properties.

Organic phase-change materials (PCMs) hold promise in developing advanced thermoregulation and responsive energy systems owing to their high latent heat capacity and thermal reliability. However, organic PCMs are prone to leakages in the liquid state and, thus, are hardly applicable in their pristine form. Herein, we encapsulated organic PCM n-Octadecane into polyurethane capsules via polymerization of commercially available polymethylene polyphenylene isocyanate and polyethylene glycol at the interface oil-in-water emulsion and studied how various n-Octadecane feeding affected the shell formation, capsule structure, and latent heat storage properties. The successful shell polymerization and encapsulation of n-Octadecane dissolved in the oil core was verified by confocal microscopy and Fourier-transform infrared spectroscopy. The mean capsule size varied from 9.4 to 16.7 µm while the shell was found to reduce in thickness from 460 to 220 nm as the n-Octadecane feeding increased. Conversely, the latent heat storage capacity increased from 50 to 132 J/g corresponding to the growth in actual n-Octadecane content from 25% to 67% as revealed by differential scanning calorimetry. The actual n-Octadecane content increased non-linearly along with the n-Octadecane feeding and reached a plateau at 66-67% corresponded to 3.44-3.69 core-to-monomer ratio. Finally, the capsules with the reasonable combination of structural and thermal properties were evaluated as a thermoregulating additive to a commercially available paint.

Effect of surface functionalization of metal wire on electrophysical properties of inductive elements.

The development of the microelectronics industry requires a new element basis with reduced size and increased functionality. The most important components in modern microelectronic integrated circuits are passive elements. One of the key challenges in order to improve the functionality of integrated circuits is to increase the quality of passive elements composing them. In this paper we suggest a novel approach to increase the quality factor Q of inductors by the surface modification and functionalization of the metal components. Ultrasound induced surface modification of metal wires led to the formation of a porous surface structure, which further can be functionalized with magnetite nanoparticles using layer-by-layer assembly technique. The surface modification and deposition of magnetite nanoparticles was investigated with SEM, XRD, and contact angle measurements. Additionally, inductance and resistance measurements, as the main parameters determining the Q-factor of inductors, were carried out. Samples with high number of magnetic nanoparticle-polyelectrolyte bilayers demonstrate a significant increase in inductance and a slight decrease in resistance in comparison to uncoated ones. The combination of these factors led to enhancement the Q-factor of the investigated inductive elements.

Growth of mesoporous silica nanoparticles monitored by time-resolved small-angle neutron scattering.

Since the first development of surfactant-templated mesoporous silicas, the underlying mechanisms behind the formation of their structures have been under debate. Here, for the first time, time-resolved small-angle neutron scattering (tr-SANS) is applied to study the complete formation of mesoporous silica nanoparticles. A distinct advantage of this technique is the ability to detect contributions from the whole system, enabling the visualization not only of particle genesis and growth but also the concurrent changes to the coexistent micelle population. In addition, using contrast-matching tr-SANS, it is possible to highlight the individual contributions from the silica and surfactant. An analysis of the data agrees well with the previously proposed "current bun" model describing particle growth: Condensing silica oligomers adsorb to micelles, reducing intermicellar repulsion and resulting in aggregation to form initial particle nuclei. From this point, the growth occurs in a cooperative manner, with condensing silica filling the gaps between further aggregating micelles. The mechanistic results are discussed with respect to different reaction conditions by changing either the concentration of the silica precursor or the temperature. In doing so the importance of in situ techniques is highlighted, in particular, tr-SANS, for mechanism elucidation in the broad field of materials science.

pH-controlled release of proteins from polyelectrolyte-modified anodized titanium surfaces for implant applications.

Titanium is a popular choice of implant material given its strength, durability, and biocompatibility; however, strong interfaces with the surrounding tissue are not achieved, resulting in stress shielding and implant loosening. One option for improving adhesion is modification of the surface chemistry and topography through anodization, while another option is coating the titanium surface with a protein-eluting polyelectrolyte complex. Morphogenetic proteins such as BMP-2 have been shown to cause cell migration, expression of different genes, and development of different tissues. Anodization was used to form a porous oxide structure across the surface. A polyelectrolyte coating of poly-l-histidine and poly(methacrylic acid) was prepared and was shown to be effective for sustained release of negatively charged species under physiological conditions. This complex demonstrated pH-dependent release, with maximum release at pH = 5-6, but low levels of sustained release at pH = 7-8. Smaller initial burst release and higher amounts of sustained release were observed when lower molecular weight poly(methacrylic acid) was used. Different methods of loading the polyelectrolyte with the model species were compared. Immersion of the coating for loading provided greater release, albeit a larger initial burst release.

Multifunctional ZnO-Co3O4 @ polymer hybrid nanocoatings with controlled adsorption, photocatalytic and anti-microbial functions for polluted water systems.

Triple action pollutant responsive multi-layer hybrid nanocoatings of architecture PEI(PAA/ZnO-Co3O4)n were constructed through ZnO-Co3O4 binary oxide co-precipitation followed by its inclusion in multi-layer polymeric thin films using Layer-by-Layer (LbL) deposition. Characterization of the designed architecture was carried out via FTIR, XRD, UV-Vis, and Raman spectroscopic studies to evaluate the chemical nature, bonding, and crystallographic behavior of ZnO-Co3O4. Peaks of ZnO-Co3O4 were recorded at 586.38, 486.08, and 443.64 cm-1 while pronounced shifting of ZnO characteristic E2 (high) peak ~ 450 cm-1 and appearance of modes around 495, 530, 630, and 719 cm-1 indexed via Raman studies validated Co3O4 impregnation into ZnO structure. XRD patterns of ZnO-Co3O4 compared to their previously reported pristine structures also justified the formation of binary oxide as unit composite. SEM micrographs confirmed homogenous multi-layered depositions while EDX analysis confirmed their uniform elemental distribution in the unit structure. Sequential multi-layer buildup up to 48 layer pairs was monitored using ellipsometry with maximum film thickness ~ 89 nm and by UV-Vis at 376 nm. The prepared thin films exhibited significant photodegradation of methylene blue ~ 91% and Cu (II) adsorption capacity ~ 89% within first 90 min of contact, along with prominent bactericidal efficiency against E. coli within 24 h of reaction time. FAAS, ICP-OES, and UV-Vis spectroscopy analyses make these multifunctional hybrid nanocoatings promising for industrial wastewater as well as drinking water purification setups. Furthermore, protuberant recycling and regenerative capacity make these hybrid nanocoatings an eco-friendly system for hydro-remediation.

Phase-Change Microcapsules with a Stable Polyurethane Shell through the Direct Crosslinking of Cellulose Nanocrystals with Polyisocyanate at the Oil/Water Interface of Pickering Emulsion.

Phase-change materials (PCMs) attract much attention with regard to their capability of mitigating fossil fuel-based heating in in-building applications, due to the responsive accumulation and release of thermal energy as a latent heat of reversible phase transitions. Organic PCMs possess high latent heat storage capacity and thermal reliability. However, bare PCMs suffer from leakages in the liquid form. Here, we demonstrate a reliable approach to improve the shape stability of organic PCM n-octadecane by encapsulation via interfacial polymerization at an oil/water interface of Pickering emulsion. Cellulose nanocrystals are employed as emulsion stabilizers and branched oligo-polyol with high functionality to crosslink the polyurethane shell in reaction with polyisocyanate dissolved in the oil core. This gives rise to a rigid polyurethane structure with a high density of urethane groups. The formation of a polyurethane shell and successful encapsulation of n-octadecane is confirmed by FTIR spectroscopy, XRD analysis, and fluorescent confocal microscopy. Electron microscopy reveals the formation of non-aggregated capsules with an average size of 18.6 µm and a smooth uniform shell with the thickness of 450 nm. The capsules demonstrate a latent heat storage capacity of 79 J/g, while the encapsulation of n-octadecane greatly improves its shape and thermal stability compared with bulk paraffin.

Natural Nanoclay-Based Silver-Phosphomolybdic Acid Composite with a Dual Antimicrobial Effect.

The problem of microbial growth on various surfaces has increased concern in society in the context of antibiotic misuse and the spreading of hospital infections. Thus, the development of new, antibiotic-free antibacterial strategies is required to combat bacteria resistant to usual antibiotic treatments. This work reports a new method for producing an antibiotic-free antibacterial halloysite-based nanocomposite with silver nanoparticles and phosphomolybdic acid as biocides, which can be used as components of smart antimicrobial coatings. The composite was characterized by using energy-dispersive X-ray fluorescence spectroscopy and transmission electron microscopy. The release of phosphomolybdic acid from the nanocomposite was studied by using UV-vis spectroscopy. It was shown that the antibiotic-free nanocomposite consisting of halloysite nanotubes decorated with silver nanoparticles loaded with phosphomolybdic acid and treated with calcium chloride possesses broad antibacterial properties, including the complete growth inhibition of Staphylococcus aureus and Pseudomonas aeruginosa bacteria at a 0.5 g × L-1 concentration and Acinetobacter baumannii at a 0.25 g × L-1 concentration.

Activating a Semiconductor-Liquid Junction via Laser-Derived Dual Interfacial Layers for Boosted Photoelectrochemical Water Splitting.

The semiconductor-liquid junction (SCLJ), the dominant place in photoelectrochemical (PEC) catalysis, determines the interfacial activity and stability of photoelectrodes, whcih directly affects the viability of PEC hydrogen generation. Though efforts dedicated in past decades, a challenge remains regarding creating a synchronously active and stable SCLJ, owing to the technical hurdles of simultaneously overlaying the two advantages. The present work demonstrates that creating an SCLJ with a unique configuration of the dual interfacial layers can yield BiVO4 photoanodes with synchronously boosted photoelectrochemical activity and operational stability, with values located at the top in the records of such photoelectrodes. The bespoke dual interfacial layers, accessed via grafting laser-generated carbon dots with phenolic hydroxyl groups (LGCDs-PHGs), are experimentally verified effective, not only in generating the uniform layer of LGCDs with covalent anchoring for inhibited photocorrosion, but also in activating, respectively, the charge separation and transfer in each layer for boosted charge-carrier kinetics, resulting in FeNiOOH-LGCDs-PHGs-MBVO photoanodes with a dual configuration with the photocurrent density of 6.08 mA cm-2 @ 1.23 VRHE , and operational stability up to 120 h @ 1.23 VRHE . Further work exploring LGCDs-PHGs from catecholic molecules warrants the proposed strategy as being a universal alternative for addressing the interfacial charge-carrier kinetics and operational stability of semiconductor photoelectrodes.

Ultrasonic approach for formation of erbium oxide nanoparticles with variable geometries.

Ultrasound (20 kHz, 29 W·cm(-2)) is employed to form three types of erbium oxide nanoparticles in the presence of multiwalled carbon nanotubes as a template material in water. The nanoparticles are (i) erbium carboxioxide nanoparticles deposited on the external walls of multiwalled carbon nanotubes and Er(2)O(3) in the bulk with (ii) hexagonal and (iii) spherical geometries. Each type of ultrasonically formed nanoparticle reveals Er(3+) photoluminescence from crystal lattice. The main advantage of the erbium carboxioxide nanoparticles on the carbon nanotubes is the electromagnetic emission in the visible region, which is new and not examined up to the present date. On the other hand, the photoluminescence of hexagonal erbium oxide nanoparticles is long-lived (µs) and enables the higher energy transition ((4)S(3/2)-(4)I(15/2)), which is not observed for spherical nanoparticles. Our work is unique because it combines for the first time spectroscopy of Er(3+) electronic transitions in the host crystal lattices of nanoparticles with the geometry established by ultrasound in aqueous solution of carbon nanotubes employed as a template material. The work can be of great interest for "green" chemistry synthesis of photoluminescent nanoparticles in water.

Nanoparticle modification by weak polyelectrolytes for pH-sensitive pickering emulsions.

The affinity of weak polyelectrolyte coated oxide particles to the oil-water interface can be controlled by the degree of dissociation and the thickness of the weak polyelectrolyte layer. Thereby the oil in water (o/w) emulsification ability of the particles can be enabled. We selected the weak polyacid poly(methacrylic acid sodium salt) and the weak polybase poly(allylamine hydrochloride) for the surface modification of oppositely charged alumina and silica colloids, respectively. The isoelectric point and the pH range of colloidal stability of both particle-polyelectrolyte composites depend on the thickness of the weak polyelectrolyte layer. The pH-dependent wettability of a weak polyelectrolyte-coated oxide surface is characterized by contact angle measurements. The o/w emulsification properties of both particles for the nonpolar oil dodecane and the more polar oil diethylphthalate are investigated by measurements of the droplet size distributions. Highly stable emulsions can be obtained when the degree of dissociation of the weak polyelectrolyte is below 80%. Here the average droplet size depends on the degree of dissociation, and a minimum can be found when 15 to 45% of the monomer units are dissociated. The thickness of the adsorbed polyelectrolyte layer strongly influences the droplet size of dodecane/water emulsion droplets but has a less pronounced impact on the diethylphthalate/water droplets. We explain the dependency of the droplet size on the emulsion pH value and the polyelectrolyte coating thickness with arguments based on the particle-wetting properties, the particle aggregation state, and the oil phase polarity. Cryo-SEM visualization shows that the regularity of the densely packed particles on the oil-water interface correlates with the degree of dissociation of the corresponding polyelectrolyte.

A new approach to nucleation of cavitation bubbles at chemically modified surfaces.

Cavitation at the solid surface normally begins with nucleation, in which defects or assembled molecules located at a liquid-solid interface act as nucleation centers and are actively involved in the evolution of cavitation bubbles. Here, we propose a simple approach to evaluate the behavior of cavitation bubbles formed under high intensity ultrasound (20 kHz, 51.3 W cm(-2)) at solid surfaces, based on sonication of patterned substrates with a small roughness (less than 3 nm) and controllable surface energy. A mixture of octadecylphosphonic acid (ODTA) and octadecanethiol (ODT) was stamped on the Si wafer coated with different thicknesses of an aluminium layer (20-500 nm). We investigated the growth mechanism of cavitation bubble nuclei and the evolution of individual pits (defects) formed under sonication on the modified surface. A new activation behavior as a function of Al thickness, sonication time, ultrasonic power and temperature is reported. In this process cooperativity is introduced, as initially formed pits further reduce the energy to form bubbles. Furthermore, cavitation on the patterns is a controllable process, where up to 40-50 min of sonication time only the hydrophobic areas are active nucleation sites. This study provides a convincing proof of our theoretical approach on nucleation.

Line emission of sodium and hydroxyl radicals in single-bubble sonoluminescence.

Spectroscopic studies of single-bubble sonoluminescence (SBSL) in water and aqueous sodium chloride solutions with a defined concentration of argon were performed as a function of the driving acoustic pressure. The broad-band continuum ranging from 200 to 700 nm is characterized by fits using Planck's law of blackbody radiation. The obtained blackbody temperatures are in the range of 10(4) K and are revealed to be independent of the presence of a salt and the acoustic pressure, whereas the SL intensity increases by a factor of more than 10 within the studied acoustic pressure range. The different trends followed by SL intensity and blackbody temperatures question the blackbody model. In solutions with 70 mbar of argon, line emissions of OH(•) radicals and Na* are observed. The shape of the OH(•) radical emission spectrum is very similar to that in MBSL spectra, indicating the strong similarity of intrabubble conditions. An increase of the acoustic pressure causes the continuum to overlap the lines until they become indistinguishable. The emission line of Na* in NaCl is observed only at high NaCl concentrations. When sodium dodecylsulfate is used a pronounced Na* line is already observed in a 1 mM solution thanks to enrichment of sodium ions at the interface. The results presented in this work reveal the strong similarity of SBSL and MBSL under certain experimental conditions.