Ultrathin Ternary FeCoNi Alloy Nanoarrays in BaTiO3 Matrix for Room-Temperature Multiferroic and Hyperbolic Metamaterial.

Multifunctional vertically aligned nanocomposite (VAN) thin films exhibit considerable potential in diverse fields. Here, a BaTiO3-FeCoNi alloy (BTO-FCN) system featuring an ultrathin ternary FCN alloy nanopillar array embedded in the BTO matrix has been developed with tailorable nanopillar size and interpillar distance. The magnetic alloy nanopillars combined with a ferroelectric oxide matrix present intriguing multifunctionality and coupling properties. The room-temperature magnetic response proves the soft magnet nature of the BTO-FCN films with magnetic anisotropy has been demonstrated. Furthermore, the anisotropic nature of the dielectric-metal alloy VAN renders it an ideal candidate for hyperbolic metamaterial (HMM), and the epsilon-near-zero (ENZ) wavelength, where the real part of permittivity (ε') turns to negative, can be tailored from ∼700 nm to ∼1050 nm. Lastly, room-temperature multiferroicity has been demonstrated via interfacial coupling between the magnetic nanopillars and ferroelectric matrix.

TiN-Au/HfO2 -Au Multilayer Thin Films with Tunable Hyperbolic Optical Response.

Hyperbolic metamaterials (HMM) possess significant anisotropic physical properties and tunability and thus find many applications in integrated photonic devices. HMMs consisting of metal and dielectric phases in either multilayer or vertically aligned nanocomposites (VAN) form are demonstrated with different hyperbolic properties. Herein, self-assembled HfO2 -Au/TiN-Au multilayer thin films, combining both the multilayer and VAN designs, are demonstrated. Specifically, Au nanopillars embedded in HfO2 and TiN layers forming the alternative layers of HfO2 -Au VAN and TiN-Au VAN. The HfO2 and TiN layer thickness is carefully controlled by varying laser pulses during pulsed laser deposition (PLD). Interestingly, tunable anisotropic physical properties can be achieved by adjusting the bi-layer thickness and the number of the bi-layers. Type II optical hyperbolic dispersion can be obtained from high layer thickness structure (e.g., 20 nm), while it can be transformed into Type I optical hyperbolic dispersion by reducing the thickness to a proper value (e.g., 4 nm). This new nanoscale hybrid metamaterial structure with the three-phase VAN design shows great potential for tailorable optical components in future integrated devices.

Exploration of the application potential of serum multi-biomarker model in colorectal cancer screening.

Analyzing blood lipid and bile acid profile changes in colorectal cancer (CRC) patients. Evaluating the integrated model's diagnostic significance for CRC. Ninety-one individuals with colorectal cancer (CRC group) and 120 healthy volunteers (HC group) were selected for comparison. Serum levels of total cholesterol (TC), triglycerides (TG), high-density lipoprotein cholesterol (HDL-C), low-density lipoprotein cholesterol (LDL-C), and apolipoproteins (Apo) A1, ApoA2, ApoB, ApoC2, and ApoC3 were measured using immunoturbidimetric and colorimetric methods. Additionally, LC-MS/MS was employed to detect fifteen bile acids in the serum, along with six tumor markers: carcinoembryonic antigen (CEA), carbohydrate antigens (CA) 125, CA19-9, CA242, CA50, and CA72-4. Group comparisons utilized independent sample t-tests and Mann-Whitney U tests. A binary logistic regression algorithm was applied to fit the indicators and establish a screening model; the diagnostic accuracy of individual Indicators and the model was analyzed using receiver operating characteristic (ROC) curves. The CRC group showed significantly lower levels in eight serum lipid indicators and eleven bile acids compared to the HC group (P < 0.05). Conversely, serum levels of TG, CA19-9, and CEA were elevated (P < 0.05). Among the measured parameters, ApoA2 stands out for its strong correlation with the presence of CRC, showcasing exceptional screening efficacy with an area under the curve (AUC) of 0.957, a sensitivity of 85.71%, and a specificity of 93.33%. The screening model, integrating ApoA1, ApoA2, lithocholic acid (LCA), and CEA, attained an impressive AUC of 0.995, surpassing the diagnostic accuracy of individual lipids, bile acids, and tumor markers. CRC patients manifest noteworthy alterations in both blood lipids and bile acid profiles. A screening model incorporating ApoA1, ApoA2, LCA, and CEA provides valuable insights for detecting CRC.

Bile acid profiles and classification model accuracy for inflammatory bowel disease diagnosis.

To investigate the utility of serum bile acid profiling for the diagnosis of inflammatory bowel disease (IBD). We analyzed 15 specific bile acids in the serum of 269 IBD patients, 200 healthy controls (HC), and 174 patients with other intestinal diseases (OID) using liquid chromatography-tandem mass spectrometry (LC-MS/MS). Serum bile acid levels were compared between IBD group, HC group, and OID group. Binary logistic regression-based models were developed to model the bile acids and diagnose IBD. Furthermore, receiver operating characteristic (ROC) curve analysis was performed to assess the diagnostic accuracy of each bile acid and the model. Compared to HC group, IBD group exhibited significantly lower levels of chenodeoxycholic acid (CDCA), deoxycholic acid (DCA), glycodeoxycholic acid (GDCA), taurodeoxycholic acid (TDCA), lithocholic acid (LCA), glycolithocholic acid (GLCA), taurolithocholic acid (TLCA), and an elevated primary-to-secondary bile acid ratio. DCA had an area under the curve (AUC) of 0.860 for diagnosing IBD, with a sensitivity of 80.67% and a specificity of 82.50%. A model Y0 combining DCA and CDCA to distinguish between IBD group and HC group further improved accuracy (AUC = 0.866, sensitivity = 76.28%, specificity = 89.37%). Compared to non-IBD group (which combined healthy controls and those with other intestinal diseases), IBD group had significantly lower levels of DCA, GDCA, TDCA, LCA, GLCA, and TLCA, and elevated levels of glycocholic acid (GCA) and glycochenodeoxycholic acid (GCDCA). A model Y1 incorporating GCDCA, DCA and TLCA to distinguish between IBD group and non-IBD group yielded an AUC of 0.792, with a sensitivity of 77.67% and specificity of 71.91%. IBD patients exhibit decreased serum secondary bile acid levels and an elevated primary-to-secondary bile acid ratio. Serum bile acid alterations are associated with the onset of IBD. A model consisting of CDCA and DCA has potential for distinguishing between IBD group and HC group, while a model incorporating GCDCA, DCA and TLCA may be suitable for distinguishing between IBD group and non-IBD group.

Low Contact Resistance on Monolayer MoS2 Field-Effect Transistors Achieved by CMOS-Compatible Metal Contacts.

Contact engineering on monolayer layer (ML) semiconducting transition metal dichalcogenides (TMDs) is considered the most challenging problem toward using these materials as a transistor channel in future advanced technology nodes. The typically observed strong Fermi-level pinning induced in part by the reaction of the source/drain contact metal and the ML TMD frequently results in a large Schottky barrier height, which limits the electrical performance of ML TMD field-effect transistors (FETs). However, at a microscopic level, little is known about how interface defects or reaction sites impact the electrical performance of ML TMD FETs. In this work, we have performed statistically meaningful electrical measurements on at least 120 FETs combined with careful surface analysis to unveil contact resistance dependence on interface chemistry. In particular, we achieved a low contact resistance for ML MoS2 FETs with ultrahigh-vacuum (UHV, 3 × 10-11 mbar) deposited Ni contacts, ∼500 Ω·µm, which is 5 times lower than the contact resistance achieved when deposited under high-vacuum (HV, 3 × 10-6 mbar) conditions. These electrical results strongly correlate with our surface analysis observations. X-ray photoelectron spectroscopy (XPS) revealed significant bonding species between Ni and MoS2 under UHV conditions compared to that under HV. We also studied the Bi/MoS2 interface under UHV and HV deposition conditions. Different from the case of Ni, we do not observe a difference in contact resistance or interface chemistry between contacts deposited under UHV and HV. Finally, this article also explores the thermal stability and reliability of the two contact metals employed here.