RESUMEN
The applicability of low-cost lignocellulosic biosorbent-coir pith, for removal of cobalt (II) from aqueous solutions using batch adsorption studies has been explored herein. Adsorption characteristics of coir pith were investigated systematically by varying the experimental parameters such as, solution pH, initial metal ion concentration, contact time, adsorbent dose and temperature. The studies revealed that optimum adsorption of cobalt onto coir pith occurred in the pH range of 4.0 - 7.0. Sorption kinetics of cobalt was found to be quite rapid under ambient conditions and the process followed second-order kinetics. The experimental data have been analyzed using non-linearized forms of Langmuir, Freundlich and Redlich-Peterson adsorption isotherms for mathematical description of the process. Desorption studies showed that the quantitative recovery of Co (II) from the spent coir pith was achieved by using 0.5 N HCl. The suitability of this adsorbent for real situation has been observed, when complete removal of cobalt from nuclear power plant coolant water was obtained. The present studies successfully demonstrated the use of coir pith as an efficient adsorbent material for removal of cobalt from aqueous solutions.
Asunto(s)
Biomasa , Cobalto/aislamiento & purificación , Lignina/química , Adsorción , Concentración de Iones de Hidrógeno , Cinética , Lignina/economía , Modelos Moleculares , Soluciones , Espectrofotometría Atómica , Temperatura , AguaRESUMEN
Coir pith was chemically modified for the adsorption of cobalt(II) ions from aqueous solution. Chemical modification was done by esterification using succinic anhydride followed by activation with NaHCO(3) in order to improve the adsorption of Co(II). Adsorptive removal of Co(II) from aqueous solution onto modified coir pith was evaluated in batch studies under varying conditions of agitation time and metal ion concentration to assess the kinetic and equilibrium parameters. A pseudo-second-order kinetic model fitted well for the sorption of Co(II) onto modified coir pith. Sorption kinetics showed that the loading of Co(II) by this material was quite fast under ambient conditions. The Langmuir and Freundlich equilibrium isotherm models provided excellent fits for the adsorption data, with R(2) of 0.99 and 0.98, respectively. After esterification, the maximum Co(II) sorption loading Q(0); was greatly improved. It is evident that chemically modified adsorbent exhibits better Co(II) removal capability than raw adsorbent suggesting that surface modification of the adsorbent generates more adsorption sites on its solid surface for metal adsorption. A complete recovery of the adsorbed metal ions from the spent adsorbent was achieved by using 1.0N HCl.
Asunto(s)
Biotecnología/métodos , Celulosa/química , Cobalto/química , Lignina/análogos & derivados , Contaminantes Químicos del Agua/química , Purificación del Agua/métodos , Agua/química , Adsorción , Materiales Biocompatibles/química , Residuos Industriales , Cinética , Lignina/química , Modelos Químicos , Propiedades de Superficie , Temperatura , Factores de TiempoRESUMEN
Basic aspects of uranium adsorption by coir pith have been investigated by batch equilibration. The influence of different experimental parameters such as final solution pH, adsorbent dosage, sorption time, temperature and various concentrations of uranium on uptake were evaluated. Maximum uranium adsorption was observed in the pH range 4.0-6.0. The Freundlich and Langmuir adsorption models were used for the mathematical description of the adsorption equilibrium. The equilibrium data fitted well to both the equilibrium models in the studied concentration range of uranium (200-800 mg/l) and temperatures (305-336 K). The coir pith exhibited the highest uptake capacity for uranium at 317 K, at the final solution pH value of 4.3 and at the initial uranium concentration of 800 mg/l. The kinetics of the adsorption process followed a second-order adsorption. The adsorbent used proved to be suitable for removal of uranium from aqueous solutions. 0.2 N HCl was effective in uranium desorption. The results indicated that the naturally abundant coir pith of otherwise nuisance value exhibited considerable potential for application in removal of uranium from aqueous solution.
Asunto(s)
Cocos , Frutas/metabolismo , Preparaciones de Plantas/metabolismo , Uranio/aislamiento & purificación , Contaminantes Radiactivos del Agua/aislamiento & purificación , Purificación del Agua/métodos , Absorción , Concentración de Iones de Hidrógeno , India , Cinética , Modelos Químicos , Análisis de Regresión , Uranio/farmacocinéticaRESUMEN
A simple, rapid and accurate method for the determination of chloride in magnesium metal has been developed. The quantitative determination of chloride was accomplished by anion exchange chromatography with conductometric determination. A Metrosep Anion Dual 2 analytical column connected in series with a Metrosep RP guard column was used for chloride separation. A solution containing a mixture of 1.3 mM Na2CO3 and 2 mM NaHCO3 was used as eluent. The method requires a sample dissolution using nitric acid. The limit of detection for the determination of chloride is 50 mg kg(-1) and the relative standard deviation was 5% for the overall method. The recovery of chloride added was 99-102%. No interference was observed from either the closely eluting "system peak" or the nitrate peak in the determination of chloride.
Asunto(s)
Cloruros/análisis , Cromatografía Liquida/métodos , Magnesio/química , Sensibilidad y EspecificidadRESUMEN
A method for estimation of uranium in seawater by using steady state laser flourimetry is described. Uranium present in seawater, in concentration of approximately 3 ng ml(-1) was estimated without prior separation of matrix. Quenching effect of major ions (Cl(-), Na(+), SO(4)(-), Mg(+), Ca(+), K(+), HCO(3)(-), Br(-)) present in seawater on fluorescence intensity of uranium was studied. The concentration of phosphoric acid required for maximum enhancement of fluorescence intensity was optimized and was found to be 5%. Similarly the volume of concentrated nitric acid required to eliminate the quenching effect of chloride and bromide completely from 5 ml of seawater were optimized and was found to be 3 ml. A simple equation was derived using steady state fluorescence correction method and was used for calculation of uranium concentration in seawater samples. The method has a precesion of 1% (1s, n=3). The values obtained from laser fluorimetry were validated by analyzing the same samples by linear sweep adsorptive stripping voltametry (LSASV) of the uranium-chloranilic acid (2,5-dichloro-3,6-dihydroxy-1,4-benzoquinone) complex. Both the values are well in agreement.