RESUMEN
Ni-rich cathodes are some of the most promising candidates for advanced lithium-ion batteries, but their available capacities have been stagnant due to the intrinsic Li+ storage sites. Extending the voltage window down can induce the phase transition from O3 to 1T of LiNiO2-derived cathodes to accommodate excess Li+ and dramatically increase the capacity. By setting the discharge cutoff voltage of LiNi0.6Co0.2Mn0.2O2 to 1.4 V, we can reach an extremely high capacity of 393 mAh g-1 and an energy density of 1070 Wh kg-1 here. However, the phase transition causes fast capacity decay and related structural evolution is rarely understood, hindering the utilization of this feature. We find that the overlithiated phase transition is self-limiting, which will transform into solid-solution reaction with cycling and make the cathode degradation slow down. This is attributed to the migration of abundant transition metal ions into lithium layers induced by the overlithiation, allowing the intercalation of overstoichiometric Li+ into the crystal without the O3 framework change. Based on this, the wide-potential cycling stability is further improved via a facile charge-discharge protocol. This work provides deep insight into the overstoichiometric Li+ storage behaviors in conventional layered cathodes and opens a new avenue toward high-energy batteries.
RESUMEN
In overcoming the Li+ desolvation barrier for low-temperature battery operation, a weakly-solvated electrolyte based on carboxylate solvent has shown promises. In case of an organic-anion-enriched primary solvation sheath (PSS), we found that the electrolyte tends to form a highly swollen, unstable solid electrolyte interphase (SEI) that shows a high permeability to the electrolyte components, accounting for quickly declined electrochemical performance of graphite-based anode. Here we proposed a facile strategy to tune the swelling property of SEI by introducing an inorganic anion switch into the PSS, via LiDFP co-solute method. By forming a low-swelling, Li3 PO4 -rich SEI, the electrolyte-consuming parasitic reactions and solvent co-intercalation at graphite-electrolyte interface are suppressed, which contributes to efficient Li+ transport, reversible Li+ (de)intercalation and stable structural evolution of graphite anode in high-energy Li-ion batteries at a low temperature of -20 °C.
RESUMEN
Layered transition metal oxide cathodes have been one of the dominant cathodes for lithium-ion batteries with efficient Li+ intercalation chemistry. However, limited by the weak layered interaction and unstable surface, mechanical and chemical failure plagues their electrochemical performance, especially for Ni-rich cathodes. Here, adopting a simultaneous elemental-structural atomic arrangement control based on the intrinsic Ni-Co-Mn system, the surface role is intensively investigated. Within the invariant oxygen sublattice of the crystal, a robust surface with the synergistic concentration gradient and layered-spinel intertwined structure is constructed on the model single-crystalline Ni-rich cathode. With mechanical strain dissipation and chemical erosion suppression, the cathode exhibits an impressive capacity retention of 82 % even at the harsh 60 °C after 150â cycles at 1â C. This work highlights the coupling effect of structure and composition on the chemical-mechanical properties, and the concept will spur more researches on the cathodes that share the same sublattice.
RESUMEN
Single-crystalline Ni-rich cathodes with high capacity have drawn much attention for mitigating cycling and safety crisis of their polycrystalline analogues. However, planar gliding and intragranular cracking tend to occur in single crystals with cycling, which undermine cathode integrity and therefore cause capacity degradation. Herein, we intensively investigate the origin and evolution of the gliding phenomenon in single-crystalline Ni-rich cathodes. Discrete or continuous gliding forms are revealed with new surface exposure including the gliding plane (003) and reconstructed (-108) under surface energy drive. It is also demonstrated that the gliding process is the in-plane migration of transition metal ions, and reducing oxygen vacancies will increase the migration energy barrier by which gliding and microcracking can be restrained. The designed cathode with less oxygen deficiency exhibits outstanding cycling performance with an 80.8% capacity retention after 1000 cycles in pouch cells. Our findings provide an insight into the relationship between defect control and chemomechanical properties of single-crystalline Ni-rich cathodes.
RESUMEN
Single-crystalline cathodes are the most promising candidates for high-energy-density lithium-ion batteries (LIBs). Compared to their polycrystalline counterparts, single-crystalline cathodes have advantages over liquid-electrolyte-based LIBs in terms of cycle life, structural stability, thermal stability, safety, and storage but also have a potential application in solid-state LIBs. In this review, the development history and recent progress of single-crystalline cathodes are reviewed, focusing on properties, synthesis, challenges, solutions, and characterization. Synthesis of single-crystalline cathodes usually involves preparing precursors and subsequent calcination, which are summarized in the details. In the following sections, the development issues of single-crystalline cathodes, including kinetic limitations, interfacial side reactions, safety issues, reversible planar gliding and micro-cracking, and particle size distribution and agglomeration, are systematically analyzed, followed by current solutions and characterization techniques. Finally, this review is concluded with proposed research thrusts for the future development of single-crystalline cathodes.
RESUMEN
Chemical modification of electrode materials by heteroatom dopants is crucial for improving storage performance in rechargeable batteries. Electron configurations of different dopants significantly influence the chemical interactions inbetween and the chemical bonding with the host material, yet the underlying mechanism remains unclear. We revealed competitive doping chemistry of Group IIIA elements (boron and aluminum) taking nickel-rich cathode materials as a model. A notable difference between the atomic radii of B and Al accounts for different spatial configurations of the hybridized orbital in bonding with lattice oxygen. Density functional theory calculations reveal, Al is preferentially bonded to oxygen and vice versa, and shows a much lower diffusion barrier than BIII . In the case of Al-preoccupation, the bulk diffusion of BIII is hindered. In this way, a B-rich surface and Al-rich bulk is formed, which helps to synergistically stabilize the structural evolution and surface chemistry of the cathode.
RESUMEN
Li+-conductive ceramic oxide electrolytes, such as garnet-structured Li7La3Zr2O12, have been considered as promising candidates for realizing the next-generation solid-state Li-metal batteries with high energy density. Practically, the ceramic pellets sintered at elevated temperatures are often provided with high stiffness yet low fracture toughness, making them too brittle for the manufacture of thin-film electrolytes and strain-involved operation of solid-state batteries. The ceramic powder, though provided with ductility, does not yield satisfactorily high Li+ conductivity due to poor ion conduction at the boundaries of ceramic particles. Here we show, with solid-state nuclear magnetic resonance, that a uniform conjugated polymer nanocoating formed on the surface of ceramic oxide particles builds pathways for Li+ conduction between adjacent particles in the unsintered ceramics. A tape-casted thin-film electrolyte (thickness: <10 µm), prepared from the polymer-coated ceramic particles, exhibits sufficient ionic conductivity, a high Li+ transference number, and a broad electrochemical window to enable stable cycling of symmetric Li/Li cells and all-solid-state rechargeable Li-metal cells.
RESUMEN
Solid-state Li-metal batteries offer a great opportunity for high-security and high-energy-density energy storage systems. However, redundant interfacial modification layers, intended to lead to an overall satisfactory interfacial stability, dramatically debase the actual energy density. Herein, a dual-interface amorphous cathode electrolyte interphase/solid electrolyte interphase CEI/SEI protection (DACP) strategy is proposed to conquer the main challenges of electrochemical side reactions and Li dendrites in hybrid solid-liquid batteries without sacrificing energy density via LiDFOB and LiBF4 in situ synergistic conversion. The amorphous CEI/SEI products have an ultralow mass proportion and act as a dynamic shield to cooperatively enforce dual electrodes with a well-preserved structure. Thus, this in situ DACP layer subtly reconciles multiple interfacial compatibilities and a high energy density, endowing the hybrid solid-liquid Li-metal battery with a sustainably brilliant cycling stability even at practical conditions, including high cathode loading, high voltage (4.5 V), and high temperature (45 °C) conditions, and enables a high-energy-density (456 Wh kg-1) pouch cell (11.2 Ah, 5 mA h cm-2) with a lean electrolyte (0.92 g Ah-1, containing solid and liquid phases). The compatible modification strategy points out a promising approach for the design of practical interfaces in future solid-state battery systems.
RESUMEN
Sulfide-based solid-state electrolytes (SSEs) matched with alloy anodes are considered as promising candidates for application in all-solid-state batteries (ASSBs) to overcome the bottlenecks of the lithium (Li) anode. However, an understanding of the dynamic electrochemical processes on alloy anode in SSE is still elusive. Herein, in situ atomic force microscopy gives insights into the block-formation and stack-accumulation behaviors of Li precipitation on an Li electrode, uncovering the morphological evolution of nanoscale Li deposition/dissolution in ASSBs. Furthermore, two-dimensional Li-indium (In) alloy lamellae and the homogeneous solid electrolyte interphase (SEI) shell on the In electrode reveal the precipitation mechanism microscopically regulated by the alloy anode. The flexible and wrinkle-structure SEI shell further enables the electrode protection and inner Li accommodation upon cycles, elucidating the functional influences of SEI shell on the cycling behaviors. Such on-site tracking of the morphological evolution and dynamic mechanism provide an in-depth understanding and thus benefit the optimizations of alloy-based ASSBs.
RESUMEN
Single-crystalline Ni-rich cathodes are promising candidates for the next-generation high-energy Li-ion batteries. However, they still suffer from poor rate capability and low specific capacity due to the severe kinetic hindrance at the nondilute state during Li+ intercalation. Herein, combining experiments with density functional theory (DFT) calculations, we demonstrate that this obstacle can be tackled by regulating the oxidation state of nickel via injecting high-valence foreign Ta5+ . The as-obtained single-crystalline LiNi0.8 Co0.1 Mn0.1 O2 delivers a high specific capacity (211.2â mAh g-1 at 0.1 C), high initial Coulombic efficiency (93.8 %), excellent rate capability (157â mAh g-1 at 4 C), and good durability (90.4 % after 100 cycles under 0.5 C). This work provides a strategy to mitigate the Li+ kinetic hindrance of the appealing single-crystalline Ni-rich cathodes and will inspire peers to conduct an intensive study.
RESUMEN
A hybrid solid/liquid electrolyte with superior security facilitates the implementation of high-energy-density storage devices, but it suffers from inferior chemical compatibility with cathodes. Herein, an optimal lithium difluoro(oxalato)borate salt was introduced to build inâ situ an amorphous cathode electrolyte interphase (CEI) between Ni-rich cathodes and hybrid electrolyte. The CEI preserves the surface structure with high compatibility, leading to enhanced interfacial stability. Meanwhile, the space-charge layer can be prominently mitigated at the solid/solid interface via harmonized chemical potentials, acquiring promoted interfacial dynamics as revealed by COMSOL simulation. Consequently, the amorphous CEI integrates the bifunctionality to provide an excellent cycling stability, high Coulombic efficiency, and favorable rate capability in high-voltage Li-metal batteries, innovating the design philosophy of functional CEI strategy for future high-energy-density batteries.
RESUMEN
The fast-ionic-conducting ceramic electrolyte is promising for next-generation high-energy-density Li-metal batteries, yet its application suffers from the high interfacial resistance and poor interfacial stability. In this study, the compatible solid-state electrolyte was designed by coating Li1.4Al0.4Ti1.6(PO4)3 (LATP) with polyacrylonitrile (PAN) and polyethylene oxide (PEO) oppositely to satisfy deliberately the disparate interface demands. Wherein, the upper PAN constructs soft-contact with LiNi0.6Mn0.2Co0.2O2, and the lower PEO protects LATP from being reduced, guaranteeing high-voltage tolerance and improved stability toward Li-metal anode performed in one ceramic. Moreover, the core function of LATP is amplified to guide homogeneous ions distribution and hence suppresses the formation of a space-charge layer across interfaces, uncovered by the COMSOL Multiphysics concentration field simulation. Thus, such a bifunctional modified ceramic electrolyte integrates the respective superiority to render Li-metal batteries with excellent cycling stability (89% after 120 cycles), high Coulombic efficiency (exceeding 99.5% per cycle), and a dendrite-free Li anode at 60 °C, which represents an overall design of ceramic interface engineering for future practical solid battery systems.
RESUMEN
The key bottleneck troubling the application of solid electrolyte is the contradictory requirements from Li-metal and cathode, which need high modulus to block Li-dendrite penetration and flexibility to enable low interface resistance, respectively. This study describes a thin asymmetrical design of solid electrolyte to address these shortcomings. In this architecture, a rigid ceramic-layer modified with an ultrathin polymer is toward Li-metal to accomplish dendrite-suppression of Li-anode, and a soft polymer-layer spreads over the exterior and interior of cathode to endow connected interface simultaneously. This ingenious arrangement endows solid Li-metal batteries with extremely high Coulombic efficiency and cyclability. This work will open up one avenue for realizing safe and long-life energy storage systems.
RESUMEN
The conductive framework is generating considerable interest for lithium metal anodes to accommodate Li+ deposition, due to its ability to reduce electrode current density by increasing the deposition area. However, in most cases, the electroactive surface area is not fully utilized for the nucleation of Li in 3D current collectors, especially under high current densities. Herein, uniform nucleation of Li in the conductive skeleton is achieved by a two-step synergetic process arising from CuBr- and Br-doped graphene-like film. The modified electrode regulates Li nucleating in uniform pancake-like seeds and growing into a granular Li metal ascribed to the excellent lithiophilicity of CuBr- and Br-doping sites and the low Li diffusion barrier on the surface of generated LiBr, as confirmed by the experimental and computational results. Therefore, the modified anode endows small nucleation overpotential, a high-reversibility Li plating/stripping process, and excellent performance in full batteries with industrially significant cathode loading. This work suggests that a two-step cooperative strategy opens a viable route to the development of a Li anode with high reversibility for stable cycling Li metal batteries.
RESUMEN
High-energy storage devices are in demand for the rapid development of modern society. Until now, many kinds of energy storage devices, such as lithium-ion batteries (LIBs), sodium-ion batteries (NIBs), and so on, have been developed in the past 30 years. However, most of the commercially exploited and studied active electrode materials of these energy storage devices possess a single phase with low reversible capacity or unsatisfied cycle stability. Continuous and extensive research efforts are made to develop alternative materials with a higher specific energy density and long cycle life by element doping or surface modification. A novel strategy of forming composite-structure electrode materials by introducing structure units has attracted great attention in recent years. Herein, based on previous publications on these composite-structure materials, some important scientific points focusing on the design of composite-structure materials for better electrochemical performances reveal the distinction of composite structures based on average and local structure analysis methods, and an understanding of the relationship between these interior composite structures and their electrochemical performances is discussed thoroughly. The lithiation/delithiation mechanism and the remaining challenges and perspectives for composite-structure electrode materials are also elaborated.
RESUMEN
A single-crystalline Ni-rich (SCNR) cathode with a large particle size can achieve higher energy density, and is safer, than polycrystalline counterparts. However, synthesizing large SCNR cathodes (>5 µm) without compromising electrochemical performance is very challenging due to the incompatibility between Ni-rich cathodes and high temperature calcination. Herein, we introduce Vegard's Slope as a guide for rationally selecting sintering aids, and we successfully synthesize size-controlled SCNR cathodes, the largest of which can be up to 10 µm. Comprehensive theoretical calculation and experimental characterization show that sintering aids continuously migrate to the particle surface, suppress sublattice oxygen release and reduce the surface energy of the typically exposed facets, which promotes grain boundary migration and elevates calcination critical temperature. The dense SCNR cathodes, fabricated by packing of different-sized SCNR cathode particles, achieve a highest electrode press density of 3.9 g cm-3 and a highest volumetric energy density of 3000 Wh L-1. The pouch cell demonstrates a high energy density of 303 Wh kg-1, 730 Wh L-1 and 76% capacity retention after 1200 cycles. SCNR cathodes with an optimized particle size distribution can meet the requirements for both electric vehicles and portable devices. Furthermore, the principle for controlling the growth of SCNR particles can be widely applied when synthesizing other materials for Li-ion, Na-ion and K-ion batteries.
RESUMEN
High-nickel (Ni ≥ 90%) cathodes with high specific capacity hold great potential for next-generation lithium-ion batteries (LIBs). However, their practical application is restricted by the high interfacial reactivity under continuous air erosion and electrolyte assault. Herein, a stable high-nickel cathode is rationally designed via in situ induction of a dense amorphous Li2 CO3 on the particle surface by a preemptive atmosphere control. Among the residual lithium compounds, Li2 CO3 is the most thermodynamically stable one, so a dense Li2 CO3 coating layer can serve as a physical protection layer to isolate the cathode from contact with moist air. Furthermore, amorphous Li2 CO3 can be transformed into a robust F-rich cathode electrolyte interphase (CEI) during cycling, which reinforces the cathode's interfacial stability and improves the electrochemical performance. The assembled coin cell with this modified cathode delivers a high discharge capacity of 232.4 mAh g-1 with a superior initial Coulombic efficiency (CE) of 95.1%, and considerable capacity retention of 90.4% after 100 cycles. Furthermore, no slurry gelation occurs during the large-scale electrode fabrication process. This work opens a valuable perspective on the evolution of amorphous Li2 CO3 in LIBs and provides guidance on protecting unstable high-capacity cathodes for energy-storage devices.
RESUMEN
In response to the call for safer high-energy-density storage systems, high-voltage solid-state Li metal batteries have attracted extensive attention. Therefore, solid electrolytes are required to be stable against both Li anode and high-voltage cathodes; nevertheless, the requirements still cannot be completely satisfied. Herein, a heterogeneous multilayered solid electrolyte (HMSE) is proposed to broaden electrochemical window of solid electrolytes to 0-5 V, through different electrode/electrolyte interfaces to overcome the interfacial instability problems. Oxidation-resistance poly(acrylonitrile) (PAN) is in contact with the cathode, while reduction tolerant polyethylene glycol diacrylate contacts with Li metal anode. A Janus and flexible PAN@Li1.4 Al0.4 Ge1.6 (PO4 )3 (80 wt%) composite electrolyte is designed as intermediate layer to inhibit dendrite penetration and ensure compact interface. Paired with LiNi0.6 Co0.2 Mn0.2 O2 and LiNi0.8 Co0.1 Mn0.1 O2 cathodes, which are rarely used in solid-state batteries, the solid-state Li metal batteries with HMSE exhibit excellent electrochemical performance including high capacity and long cycle life. Besides, the Li||Li symmetric batteries maintain a stable polarization less than 40 mV for more than 1000 h under 2 mA cm-2 and effective inhibition of dendrite formation. This study offers a promising approach to extend the applications of solid electrolytes for high-voltage solid-state Li metal batteries.
RESUMEN
Metallic lithium affords the highest theoretical capacity and lowest electrochemical potential and is viewed as a leading contender as an anode for high-energy-density rechargeable batteries. However, the poor wettability of molten lithium does not allow it to spread across the surface of lithiophobic substrates, hindering the production and application of this anode. Here we report a general chemical strategy to overcome this dilemma by reacting molten lithium with functional organic coatings or elemental additives. The Gibbs formation energy and newly formed chemical bonds are found to be the governing factor for the wetting behavior. As a result of the improved wettability, a series of ultrathin lithium of 10-20 µm thick is obtained together with impressive electrochemical performance in lithium metal batteries. These findings provide an overall guide for tuning the wettability of molten lithium and offer an affordable strategy for the large-scale production of ultrathin lithium, and could be further extended to other alkali metals, such as sodium and potassium.
RESUMEN
Spinel-type LiMn2O4 cathode materials commonly suffer from manganese dissolution due to the severe interfacial side reactions especially at elevated temperature. Here, a 3D hollow fusiform LiMn2O4 cathode material is reported with preferentially exposed stable {111} facets and seamless outer structure, which is clearly confirmed by microfocused ion beam scanning electron microscopy, high-resolution transmission electron microscopy as well as scanning transmission electron microscopy with atomic resolution. Owing to the optimal geometrical structure design and the preferentially exposed stable {111} facets, the electrode delivers excellent rate capability (107.6 mAh g-1 at 10 C), remarkable cycling stability (83.3% capacity retention after 1000 cycles at 1 C), and outstanding high-temperature performance. Together with the analyses of electrochemical behaviors, in situ X-ray diffraction at different temperatures, and ex situ X-ray photoelectron spectra, the underlying working mechanism for suppressing manganese dissolution is clearly articulated. These findings could provide significant guidelines for precisely designing highly stable cathode materials for LIBs.