Cu2O/WO3 S-scheme heterojunctions for photocatalytic degradation of levofloxacin based on coordination activation.

Heterogeneous photocatalytic degradation of antibiotic involves the activation of antibiotic molecules and the photocatalytic oxidation process. However, the simultaneous improvement of these processes is still a challenge. Herein, S-scheme heterojunctions consisted of Cu2O nanocluster with defective WO3 nanosheets were constructed for efficient photocatalytic degradation of levofloxacin (LVX). The typical CNS-5 composite (5 wt% Cu2O/WO3) achieves an optimal LVX degradation efficiency of 97.9% within 80 min. The spatial charge separation and enhancement of redox capacity were realized by the formation of S-scheme heterojunction between Cu2O and WO3. Moreover, their interfacial interaction would lead to the loss of lattice oxygen and the generation of W5+ sites. It is witnessed that the C-N of piperazine ring and CO of carboxylic acid in LVX are coordinated with W5+ sites to build the electronic bridge to activate LVX, greatly promoting the further degradation. This work highlights the important role of selective coordination activation cooperated with S-type heterojunctions for the photocatalytic degradation and offers a new view to understand the degradation of antibiotics at molecular level.

Photocatalytic toluene oxidation with nickel-mediated cascaded active units over Ni/Bi2WO6 monolayers.

Adsorption and activation of C-H bonds by photocatalysts are crucial for the efficient conversion of C-H bonds to produce high-value chemicals. Nevertheless, the delivery of surface-active oxygen species for C-H bond oxygenation inevitably needs to overcome obstacles due to the separated active centers, which suppresses the catalytic efficiency. Herein, Ni dopants are introduced into a monolayer Bi2WO6 to create cascaded active units consisting of unsaturated W atoms and Bi/O frustrated Lewis pairs. Experimental characterizations and density functional theory calculations reveal that these special sites can establish an efficient and controllable C-H bond oxidation process. The activated oxygen species on unsaturated W are readily transferred to the Bi/O sites for C-H bond oxygenation. The catalyst with a Ni mass fraction of 1.8% exhibits excellent toluene conversion rates and high selectivity towards benzaldehyde. This study presents a fascinating strategy for toluene oxidation through the design of efficient cascaded active units.

Nitrogen activation and surface charge regulation for enhancing the visible-light-driven N2 fixation over MoS2/UiO-66(SH)2.

A series of dehydrated MoS2/UiO-66(SH)2 (MS/UiS) composites has been prepared as photocatalysts for N2 fixation. Typically, 10% MS/UiS exhibits the best performance with an NH4+ yield rate of 54.08 µmol∙g-1∙h-1. 15N isotope test confirmed that the sample 10% MS/UiS was most effective for reducing N2 to ammonia. Such enhanced activity was due to the presence of abundant unsaturated Zr and Mo sites which would synergistically promote the adsorption and activation of N2. The photogenerated electrons would transfer to the unsaturated Zr-O clusters while part of photogenerated electrons at the interface migrate to MS via MoVI-O interactions between MS and UiS. These two electron transfer pathways effectively promote the separation of photogenerated carriers. The activated N2 is reduced to ammonia by the synergistic effect of protonated hydrogen and photogenerated electrons. Finally, a possible N2 fixation mechanism is proposed which emphasizes the significant roles of nitrogen activation and interface interaction in composites photocatalyst for improving photocatalytic performance.

Au nanoparticles-anchored defective metal-organic frameworks for photocatalytic transformation of amines to imines under visible light.

Designing efficient metal organic frameworks (MOF)-based photocatalysts has recently attracted wide attention. In this work, Au nanoparticles(NPs)-decorated defective DUT-67(Zr) (Au@DUT-67(Zr)) with enlarged channels was successfully fabricated and achieved 7.5 times higher conversion than Au NPs-decorated UiO-66(Zr) (Au@UiO-66(Zr)) for photocatalytic selective oxidation of amines to imines driven by visible light. Au NPs are more effectively fixed on DUT-67(Zr) due to its partially hollow structure. Au@DUT-67(Zr) possesses more active sites including unsaturated Zr atoms and oxygen vacancies (VO) than Au@UiO-66(Zr). In situ Fourier transform infrared (FTIR) spectrum reveals that benzylamine is activated on unsaturated Zr sites via HN…Zr species, facilitating deprotonation of -CH2 in benzylamine. VO can not only adsorb and activate oxygen (O2) but also capture plasmonic hot electrons, enhancing the forming of superoxide radical (O2-). Plasmonic hot holes assisted with O2- effectively achieve the selective oxidation of benzylamine. Finally, a possible synergetic mechanism combining the plasmon with the molecular activation is presented to illustrate the photocatalytic pathway at the molecular level.

Electrostatic interaction and surface S vacancies synergistically enhanced the photocatalytic degradation of ceftriaxone sodium.

ZnIn2S4 ultrathin 2D nanosheets with a positive surface charge are synthesized by a hydrothermal method and different contents of surface S vacancies are induced via heat treatment of as-prepared ZnIn2S4 (ZIS). As the S vacancies contents increased, the photocatalytic degradation efficiency of ceftriaxone (CTRX) sodium is promoted. Especially, ZIS-300 shows the best degradation efficiency (88.8%) for an initial CTRX concentration of 10 mg L-1 in 2 h. It is found that S vacancies cause the electron density of surface metal atoms (Zn, In) to be decreased, which makes the effective adsorption and activation of ceftriaxone anions through electrostatic adsorption interactions. Meanwhile, S vacancies also serve as active centers to promote the absorption of O2 and gather electrons to form •O2- species. The photogenerated holes quickly transfer to the surface of the catalyst to directly degrade the adsorbed CTRX. Thus, the photocatalytic CTRX degradation efficiency is significantly improved. Finally, a possible mechanism for over defective ZIS is proposed. This work provides a feasible strategy for the efficient degradation of antibiotics from the perspective of electrostatic adsorption and molecule activation.

Flowerlike BiOCl nanospheres fabricated by an in situ self-assembly strategy for efficiently enhancing photocatalysis.

For semiconductor-based photocatalytic reactions, defect engineering has been proven as an efficient approach to enhance the photocatalytic performance. In this work, a synergistically PVP/EG-assisted in situ self-assembly strategy has been successfully developed for preparing flowerlike BiOCl nanospheres (NSP) assembled by ultrathin nanosheets (thickness of 3.8 nm) with abundant oxygen vacancies (OVs). During the hydrothermal process, PVP plays a template role in controlling the orientation of the crystallite growth, leading to the forming of nanosheets. Meanwhlie, ethylene glycol would induce the self-assembly of nanosheets into a loose hierarchical architecture duo to its stereo-hindrance effect. NSP achieves a twice higher photocatalytic conversion of benzylamine than BiOCl nanosheets (NST) under visible light. XPS, ESR, NH3-TPD results manifest that NSP possesses more active sites including OVs and unsaturated Bi atoms than NST, because of avoiding the accumulation of ultrathin nanosheets. In situ FTIR reveals that benzylamine molecules can be chemisorbed and activated on BiOCl interfaces via forming -N…Bi- species. The OVs can facilitate the forming of superoxide radicals (•O2-), achieving the selective photooxidation. Finally, a possible synergetic mechanism based on the interaction of reactants and catalyst interfaces was proposed to illustrate the photocatalytic process at the molecular level.

Enhanced photocatalytic benzyl alcohol oxidation over Bi4Ti3O12 ultrathin nanosheets.

Ultrathin Bi4Ti3O12 nanosheets (NS) with the thickness about 3.9 nm were successfully synthesized by a hydrothermal method and were used as a photocatalyst for the oxidation of benzyl alcohol (BA) to benzaldehyde (BAD). The photocatalytic performance of NS is about 8 times higher than that of bulk Bi4Ti3O12. In-situ FTIR of pyridine adsorption and NH3-TPD reveal that NS has more surface Lewis acid sites (Ti4+) for the adsorption and activation of BA. The photogenerated electrons (e-) and holes (h+) of NS can be fully used to produce the superoxide radicals and carbon-centered radicals, respectively. The monolayer nanosheet structure of NS not only greatly promotes the separation of photogenerated carriers, but also achieves the efficient activation of BA molecules via the CO⋯Ti coordination. This work successfully reveals the surface/interface interactions between the surface active sites of a photocatalyst and the reactive molecules via using ultrathin nanosheet as a molecular platform.

Unsaturated NiII Centers Mediated the Coordination Activation of Benzylamine for Enhancing Photocatalytic Activity over Ultrathin Ni MOF-74 Nanosheets.

Creating accessible unsaturated active sites in metal-organic frameworks (MOFs) holds great promise for developing highly efficient catalysts. Herein, ultrathin Ni MOF-74 nanosheets (NMNs) with high-density coordinatively unsaturated NiII centers are prepared as a photocatalyst. The results of in situ ATR-IR, Raman, UV-vis DRS, and XPS suggest that abundant NiII centers can act as the active sites for boosting benzylamine (BA) activation via forming -Ni-NH2- coordination intermediates. The generation of coordination intermediates assists the transfer of photo-generated holes to BA molecules for producing BA cation free radicals, better impelling the breaking of N-H bonds and the photooxidation of BA molecules. The photo-generated electrons further activate O2 molecules to O2•- radicals for triggering the reaction. The experiments reveal that the coordination activation of BA molecules may be a rate-determining step on NMNs rather than the adsorption and activation of O2 molecules. Moreover, NMNs possess a better ability for the separation of photo-generated carriers in comparison with bulk Ni MOF-74 (NMBs). As a result, NMNs achieve a kinetic rate constant of 0.538 h-1 for the photocatalytic oxidative coupling of BA under visible light, about 50 times higher than that of NMBs (0.0011 h-1). Finally, a probable synergetic catalytic mechanism with coordination activation and photocatalysis is discussed on a molecular level. This study not only highlights the importance of coordination activation for heterogeneous photocatalysis but also affords an inspiration for building ultrathin MOF nanosheets.