Methyl Methacrylate Copolymer with Pendant Thioxanthenone Groups as Active Layer for Resistive Memory Devices.

An electro-active copolymer of methyl methacrylate and 2-((4-acroylpiperazine-1-yl)methyl)-9H-thioxanthene-9-one (poly(MMA-co-ThS)) was synthesized by radical polymerization. The copolymer has good solubility in most organic solvents, thermal stability up to 282 °C and excellent ability to form thin films on silicon wafers. Poly(MMA-co-ThS) films exhibited an electrochemical and electrochromic activity resulting in the formation of long-lived radical anion states of pendant thioxanthone groups inside the film. These states exhibit optical transitions in the visible region as a broad optical absorption band, 500<λ<900 nm (1.38

Platform for High-Spin Molecules: A Verdazyl-Nitronyl Nitroxide Triradical with Quartet Ground State.

Thermally resistant air-stable organic triradicals with a quartet ground state and a large energy gap between spin states are still unique compounds. In this work, we succeeded to design and prepare the first highly stable triradical, consisting of oxoverdazyl and nitronyl nitroxide radical fragments, with a quartet ground state. The triradical and its diradical precursor were synthesized via a palladium-catalyzed cross-coupling reaction of diiodoverdazyl with nitronyl nitroxide-2-ide gold(I) complex. Both paramagnetic compounds were fully characterized by single-crystal X-ray diffraction analysis, superconducting quantum interference device magnetometry, EPR spectroscopy in various matrices, and cyclic voltammetry. In the diradical, the verdazyl and nitronyl nitroxide centers demonstrated full reversibility of redox process, while for the triradical, the electrochemical reduction and oxidation proceed at practically the same redox potentials, but become quasi-reversible. A series of high-level CASSCF/NEVPT2 calculations was performed to predict inter- and intramolecular exchange interactions in crystals of di- and triradicals and to establish their magnetic motifs. Based on the predicted magnetic motifs, the temperature dependences of the magnetic susceptibility were analyzed, and the singlet-triplet (135 ± 10 cm-1) and doublet-quartet (17 ± 2 and 152 ± 19 cm-1) splitting was found to be moderate. Unique high stability of synthesized verdazyl-nitronylnitroxide triradical opens new perspectives for further functionalization and design of high-spin systems with four or more spins.

Spectroelectrochemical study of the reduction of 2-methyl-9H-thioxanthene-9-one and its S,S-dioxide and electronic absorption spectra of their molecular ions.

2-Methyl-9H-thioxanthene-9-one (1) and its S,S-dioxide (2) are the precursors of pendant groups that determine the reduction potentials of electro-active polyimides, which exhibit electrochromic behavior and are used in organic electronics. Electrochemical reduction of 1 and 2 leads to the formation of the corresponding persistent radical anions and dianion (for S,S-dioxide). Using 3D spectroelectrochemistry, all anions have been shown to exhibit strong absorption in the UV-VIS-NIR wavelength region. Electronic absorption spectra of 1 and 2 and their negative ions were interpreted using time-dependent DFT. According to the calculations, the most intense electronic transitions of the dianions 12- and 22- in the visible region exhibit hypsochromic shift compared to the intense transitions of the corresponding radical anions and have much higher oscillator strengths, which was confirmed experimentally for 2. An empirical kinetic model was proposed based on the analysis of the total charge passed through the cell during electrolysis and on the established mechanism of electrochemical reduction. This model perfectly described the UV-VIS-NIR optical density time dependences observed on 3D spectroelectrochemical surfaces for both compounds 1 and 2. This made it possible to explain the differences in the electrochromic behaviour of ambibolar electro-active polyimides with pendant groups based on 1, 2.

Ferromagnetically Coupled S=1 Chains in Crystals of Verdazyl-Nitronyl Nitroxide Diradicals.

Thermally stable organic diradicals with a triplet ground state along with large singlet-triplet energy gap have significant potential for advanced technological applications. A series of phenylene-bridged diradicals with oxoverdazyl and nitronyl nitroxide units were synthesized via a palladium-catalyzed cross-coupling reaction of iodoverdazyls with a nitronyl nitroxide-2-ide gold(I) complex with high yields. The diradicals exhibit high stability and do not decompose in an inert atmosphere up to 180 °C. For the diradicals, both substantial AF (ΔEST ≈-64 cm-1 ) and FM (ΔEST ≥25 and 100 cm-1 ) intramolecular exchange interactions were observed. The sign of the exchange interaction is determined both by the bridging moiety (para- or meta-phenylene) and by the type of oxoverdazyl block (C-linked or N-linked). Upon crystallization, diradicals with the triplet ground state form unique one-dimensional exchange-coupled chains with strong intra- and weak inter-diradical ferromagnetic coupling.

Acid-Catalyzed Versus Thermally Induced C1-C1' Bond Cleavage in 1,1'-Bi-2-naphthol: An Experimental and Theoretical Study.

Experiments show that 1,1'-bi-2-naphthol (BINOL) undergoes facile C1-C1' bond cleavage under action of triflic acid at temperatures above 0 °C to give mainly 2-naphthol along with oligomeric material. CASSCF and MRMP//CASSCF computations have demonstrated unambiguously that this unusual mode of scission of the biaryl bond can occur in the C1,C1'-diprotonated form of BINOL via a mechanism involving homolytic cleavage prompted by the intramolecular electrostatic repulsion. These findings also provide insights into the mechanism of a comparatively easy thermal cleavage of BINOL, implying the intermediacy of its neutral diketo form.

Properties of chromatographic columns prepared on the basis of poly(1-trimethylsilyl-1-propyne) modified with organic bases.

This article describes the effect of modification with organic bases such as uracil (U) and polyethyleneimine (PEI) on the adsorption and chromatographic properties of poly(1-trimethylsilyl-1-propyne) (PTMSP) used as a stationary phase (SP) in packed and capillary columns. It was shown that the sorbents prepared on the basis of diatomite Chromosorb P NAW support and successively modified with 9 wt.% PTMSP and 1 wt.% U (or PEI) (PC-U and PC-PEI samples, respectively), have a mesoporous structure. The IR spectrum shows the presence of carbonyl groups in the sorbent modified with uracil. The impregnation of the Chromosorb P NAW + (9/1) wt.% PTMSP sorbent with a polyethyleneimine solution leads to the appearance in the spectrum of bands characterizing NH stretching and bending vibrations, as well as a band at 1310 cm-1 which can be attributed to CN bond vibrations. The chromatographic properties of the studied sorbents differ significantly from the properties of the initial PTMSP. Packed columns PC-U and PC-PEI, as well as capillary columns with a polyethyleneimine-modified PTMSP layer, allow one to selectively separate mixtures of polar and non-polar compounds and structural isomers of hydrocarbons. Methanol on these columns is eluted in the form of a symmetrical peak separately from propane, propylene and other associated hydrocarbon impurities in commercial (technical, target) n-butane.

Evaluation of properties for Carbothane™ 3575A-based electrospun vascular graftsin vitroandin vivo.

Bioengineered vascular grafts (VGs) have emerged as a promising alternative to the treatment of damaged or occlusive vessels. It is thought that polyurethane (PU)-based scaffolds possess suitable hemocompatibility and biomechanics comparable to those of normal blood vessels. In this study, we investigated the properties of electrospun scaffolds comprising various blends of biostable polycarbonate-based PU (Carbothane™ 3575A) and gelatin. Scaffolds were characterized by scanning electron microscopy, infra-red spectroscopy, small-angle x-ray scattering, stress-loading tests, and interactions with primary human cells and blood. Data fromin vitroexperiments demonstrated that a scaffold produced from a blend of 5% Carbothane™ 3575A and 10% gelatin has proven to be a suitable material for fabricating a small-diameter VG. A comparativein vivostudy of such VGs and expanded polytetrafluoroethylene (ePTFE) grafts implanted in the abdominal aorta of Wistar rats was performed. The data of intravital study and histological examination indicated that Carbothane-based electrospun grafts outclass ePTFE grafts and represent a promising device for preclinical studies to satisfy vascular surgery needs.

Hysteretic Room-Temperature Magnetic Bistability of the Crystalline 4,7-Difluoro-1,3,2-Benzodithiazolyl Radical.

The title radical R⋅, synthesized by reduction of the corresponding cation R+, is thermally stable up to ~380 K in the crystalline state under anaerobic conditions. With SQUID magnetometry, single-crystal and powder XRD, solid-state EPR and TG-DSC, reversible spin-Peierls transition between diamagnetic and paramagnetic states featuring ~10 K hysteretic loop is observed for R⋅ in the temperature range ~310-325 K; ΔH=~2.03 kJ mol-1 and ΔS=~6.23 J mol-1 K-1. The transition is accompanied by mechanical movement of the crystals, i. e., by thermosalient behavior. The low-temperature diamagnetic P-1 polymorph of R⋅ consists of R⋅2 π-dimers arranged in (…R⋅2…)n π-stacks; whereas the high-temperature paramagnetic P21/c polymorph, of uniform (…R⋅…)n π-stacks. With the XRD geometries, CASSCF and broken-symmetry DFT jointly suggest strong antiferromagnetic (AF) interactions within R⋅2 and weak between R⋅2 for the (…R⋅2…)n stacks; and moderate AF interactions between R⋅ for the (…R⋅…)n stacks. The fully hydrocarbon archetype of R⋅ does not reveal the aforementioned properties. Thus, the fluorinated 1,3,2-benzodithiazolyls pave a new pathway in the design and synthesis of metal-less magnetically-bistable materials.

Effect of Sterilization Methods on Electrospun Scaffolds Produced from Blend of Polyurethane with Gelatin.

Fibrous polyurethane-based scaffolds have proven to be promising materials for the tissue engineering of implanted medical devices. Sterilization of such materials and medical devices is an absolutely essential step toward their medical application. In the presented work, we studied the effects of two sterilization methods (ethylene oxide treatment and electron beam irradiation) on the fibrous scaffolds produced from a polyurethane-gelatin blend. Scaffold structure and properties were studied by scanning electron microscopy (SEM), atomic force microscopy (AFM), infrared spectroscopy (FTIR), a stress-loading test, and a cell viability test with human fibroblasts. Treatment of fibrous polyurethane-based materials with ethylene oxide caused significant changes in their structure (formation of glued-like structures, increase in fiber diameter, and decrease in pore size) and mechanical properties (20% growth of the tensile strength, 30% decline of the maximal elongation). All sterilization procedures did not induce any cytotoxic effects or impede the biocompatibility of scaffolds. The obtained data determined electron beam irradiation to be a recommended sterilization method for electrospun medical devices made from polyurethane-gelatin blends.

Correction: Gostev et al. In Vivo Stability of Polyurethane-Based Electrospun Vascular Grafts in Terms of Chemistry and Mechanics. Polymers 2020, 12, 845.

The authors wish to make a change to the published paper [...].

Hybrid iron(II) phthalocyaninatoclathrochelates with a terminal reactive vinyl group and their organo-inorganic polymeric derivatives: synthetic approaches, X-ray structures and copolymerization with styrene.

Hybrid metallo(IV)phthalocyaninate-capped tris-dioximate iron(II) complexes (termed as "phthalocyaninatoclathrochelates") with non-equivalent apical fragments and functionalized with one terminal reactive vinyl group were prepared for the first time using three different synthetic approaches: (i) transmetallation (capping group exchange) of the appropriate labile boron,antimony-capped cage precursors, (ii) capping of the initially isolated reactive semiclathrochelate intermediate, and (iii) direct one-pot template condensation of their ligand synthons on the iron(II) ion as a matrix. The obtained polytopic cage complexes were characterized using elemental analysis, 1H NMR, MALDI-TOF MS and UV-vis spectra, and the single-crystal X-ray diffraction experiments. One of the obtained vinyl-terminated iron(II) phthalocyaninatoclathrochelates and its semiclathrochelate precursor were tested as monomers in a copolymerization reaction with styrene as the main component. These vinyl-terminated (semi)clathrochelate iron(II) complexes were found to be successfully copolymerized with this industrially important monomer, affording the intensely colored copolymer products. Because of a low solubility of the tested zirconium(IV) phthalocyaninate-capped tris-nioximate monomer in styrene as a solvent, a molar ratio of 1 : 500 was used. The obtained copolymer products and the kinetics of their formation were studied using GPC, FTIR, UV-vis, TGA and DSC methods. Even at such a low concentration of the Fe,Zr-binuclear metallocomplex component, an increase in the rate of the UV-light degradation of the organo-inorganic products, as well as in their thermal stability, was observed.

In Vivo Stability of Polyurethane-Based Electrospun Vascular Grafts in Terms of Chemistry and Mechanics.

The biostability of the polyurethanes Tecoflex EG-80A and Pellethane 2363-80A, used as basic polymers of the vascular grafts (VGs) produced by electrospinning, as well as the tensile strength of Tecoflex VGs, are studied. Solutions of Tecoflex or Pellethane with gelatin and bivalirudin in 1,1,1,3,3,3-hexafluoroisopropanol are used for VG production. After 1, 12, and 24 weeks of VG implantation in the infrarenal position of the abdominal aorta of Wistar rats, VGs are explanted, fixed in formalin, freed from outer tissues, dialyzed, and dried. The polyurethanes are extracted from VGs by dispersion/extraction in tetrahydrofuran (THF) and freed from the excess of THF-insoluble biopolymers. The stability of polyurethanes is assessed by IR spectroscopy and gel permeation chromatography. Pellethane has emerged to be stable at all experimental points. Tecoflex loses approximately 10% of its molecular weight (both Mn and Mw) after 3 months and restored its initial value within 6 months of its functioning as a graft. Mechanical testing demonstrates a 30% reduction in the tensile strength after 3 months in VG and a 10% increase after 6 months. The stability and mechanical properties of polyurethane-based VGs demonstrate their utility for the reconstitution of damaged arteries.

Chemistry of Herz radicals: a new way to near-IR dyes with multiple long-lived and differently-coloured redox states.

A new synthetic methodology based on the self-condensation of 1,2,3-benzodithiazolyl diradicals (Herz radicals) produces unprecedented 5-6-6-6-5 and 5-6-7-6-5 pentacyclic sulfur-nitrogen near-IR dyes featuring up to five multiple long-lived and differently coloured redox-states.

Crystal packing control of a trifluoromethyl-substituted furan/phenylene co-oligomer.

Furan/phenylene co-oligomer single crystals are considered as future materials for organic optoelectronics. Here, the effects of trifluoromethyl substituents on the crystallization, structure and optical properties of furan/phenylene co-oligomer 1,4-bis{5-[4-(trifluoromethyl)phenyl]furan-2-yl}benzene are studied systematically. The solution growth methods and physical vapor transport result in the formation of three polymorphs depending on the growth method and the solvent. Single-crystal X-ray analysis reveals the crystal structures to correspond to H-, J- or mixed aggregates. All obtained crystals exhibit high photoluminescence efficiency and have optical properties which strongly depend on the crystal packing. Variable-temperature X-ray powder diffraction analysis shows the thermal transition of two forms (H- and J-aggregates) into a third one (mixed aggregate). Terminal trifluoromethyl groups induce weak intermolecular interactions which control the crystal packing and optical properties of co-oligomer single crystals.

A mononuclear iron(II) complex: cooperativity, kinetics and activation energy of the solvent-dependent spin transition.

The system [FeL2](BF4)2 (1)-EtOH-H2O (L is 4-(3,5-dimethyl-1H-pyrazol-1-yl)-2-(pyridin-2-yl)-6-methylpyrimidine) shows a complicated balance between the relative stabilities of solvatomorphs and polymorphs of the complex [FeL2](BF4)2. New solvatomorphs, 1(LS)·EtOH·H2O and ß-1(LS)·xH2O, were isolated in this system. They were converted into four daughter phases, 1(A/LS), 1(D/LS), 1(E/LS)·yEtOH·zH2O and 1(F/LS). On thermal cycling in sealed ampoules, the phases 1(LS)·EtOH·H2O and ß-1(LS)·xH2O transform into the anhydrous phase 1(A/LS). The hysteresis loop width for the (A/LS) ↔ (A/HS) spin transition depends on the water and ethanol contents in the ampoule and varies from ca. 30 K up to 145 K. The reproducible hysteresis loop of 145 K is the widest ever reported one for a spin crossover complex. The phase 1(A/LS) combines the outstanding spin crossover properties with thermal robustness allowing for multiple cycling in sealed ampoules without degradation. The kinetics of the 1(A/LS) → 1(A/HS) transition is sigmoidal which is indicative of strong cooperative interactions. The cooperativity of the 1(A/LS) → 1(A/HS) transition is related to the formation of a 2D supramolecular structure of the phase 1(A/LS). The activation energy for the spin transition is very high (hundreds of kJ mol(-1)). The kinetics of the 1(A/HS) → 1(A/LS) transition can either be sigmoidal or exponential depending on the water and ethanol contents in the ampoule. The phases 1(D/LS) and 1(F/LS) show gradual crossover, whereas the phase 1(E/LS)·yEtOH·yH2O shows a reversible hysteretic transition associated with the solvent molecule release and uptake.

The properties of capillary columns with sorbents based on poly-(1-trimethylsilyl-1-propyne) modified with nitrous oxide.

In this work, we report the study of properties of capillary columns with a porous layer of the functionalized polymer prepared via oxidation of poly-(1-trimethylsilyl-1-propyne) (PTMSP) by nitrous oxide. It was shown that the double CC bonds of polymer reacted with nitrous oxide with formation of ketone, carbonyl and hydroxyl groups. The increase in number of those groups in polymer changed a polarity of PTMSP. The change in polarity of polymer led to the selectivity of separations, including oxygen-containing substances. The polarity values were calculated for the prepared columns. It was shown that the total polarity according to McReynolds (ΔI) was lower than that for known porous polymers. The examples of separations of aliphatic and aromatic hydrocarbons, oxygen- and halogen-containing substances were presented.

Structural Dynamics in a "Breathing" Metal-Organic Framework Studied by Electron Paramagnetic Resonance of Nitroxide Spin Probes.

Reversible structural rearrangements ("breathing") of metal-organic frameworks (MOFs) are interesting and complex phenomena with many potential applications. They are often triggered by small amounts of adsorbed guest molecules; therefore, the guest-host interactions in breathing MOFs are intensively investigated. Due to the sensitivity limitations, most analytical methods require relatively high concentrations of guests in these studies. However, because guest molecules are not "innocent", breathing behavior may become suppressed and unperturbed structural states inaccessible. We propose here the use of guest nitroxide molecules in tiny concentrations (such as 1 molecule per 1000 unit cells), which serve as spin probes for electron paramagnetic resonance (EPR), for effective study of breathing phenomena in MOFs. Using a perspective MIL-53(Al) framework as an example, we demonstrate the great advantage of this general approach, which avoids perturbation of the framework structure and allows in-depth investigation of guest-host interactions in the breathing mode.