Quantification of UV Light-Induced Spectral Response Degradation of CMOS-Based Photodetectors.

High-energy radiation is known to potentially impact the optical performance of silicon-based sensors adversely. Nevertheless, a proper characterization and quantification of possible spectral response degradation effects due to UV stress is technically challenging. On one hand, typical illumination methods via UV lamps provide a poorly defined energy spectrum. On the other hand, a standardized measurement methodology is also missing. This work provides an approach where well-defined energy spectrum UV stress conditions are guaranteed via a customized optical set up, including a laser driven light source, a monochromator, and a non-solarizing optical fiber. The test methodology proposed here allows performing a controlled UV stress between 200 nm and 400 nm with well-defined energy conditions and offers a quantitative overview of the impact on the optical performance in CMOS-based photodiodes, along a wavelength range from 200 to 1100 nm and 1 nm step. This is of great importance for the characterization and development of new sensors with a high and stable UV spectral response, as well as for implementation of practical applications such as UV light sensing and UV-based sterilization.

Improved Pastures Support Early Indicators of Soil Restoration in Low-input Agroecosystems of Nicaragua.

Pasture degradation hinders livestock production and ecosystem services that support rural smallholder communities throughout Latin America. Silvopastoral systems, with improved pasture cultivars (especially Brachiaria spp.) and multipurpose trees, offer a promising strategy to restore soils and improve livelihoods in the region. However, studies evaluating the impact of such systems on pasture productivity and soil health under realistic smallholder constraints are lacking. We evaluated the impact of improved pasture grass and tree establishment on a suite of soil health indicators in actively grazed, low-input, farmer-managed silvopastoral systems. In August 2013, paired pasture treatments (improved grass with trees vs. traditional pastures) were established on nine farms with similar land-use histories near Matagalpa, Nicaragua. On each farm, one treatment was left as traditional pasture with naturalized grass (Hyparrhenia rufa), while the adjacent treatment was sown with the improved grass (Brachiaria brizantha cv. Marandu) and planted with tree saplings without fertilizer. In August 2015, we measured standing biomass and a suite of chemical, biological, and physical soil health variables. Improved silvopastoral systems with B. brizantha produced more standing grass biomass and supported higher levels of earthworm populations and permanganate oxidizable carbon (POXC) compared to the traditional control. Correlations suggest that earthworms and POXC were associated with incipient improvements to soil aggregate stability and water holding capacity. We report measurable improvements to soil health just two years following the establishment of improved pasture systems under common smallholder management practices and suggest that these systems, even with minimal fertility inputs, have the potential to enhance regional sustainability.

Direct Imaging of Space-Charge Accumulation and Work Function Characteristics of Functional Organic Interfaces.

The tailoring of organic systems is crucial to further extend the efficiency of charge transfer mechanisms and represents a cornerstone for molecular device technologies. However, this demands control of electrical properties and understanding of the physics behind organic interfaces. Here, a quantitative spatial overview of work function characteristics for phthalocyanine architectures on Au substrates is provided via kelvin probe microscopy. While macroscopic investigations are very informative, the current approach offers a nanoscale spatial rendering of electrical characteristics which is not possible to attain via conventional techniques. Interface dipole is observed due to the formation of charge accumulation layers in thin F16 CuPc, F16 CoPc, and MnPc films, displaying work functions of 5.7, 6.1, and 5.0 eV, respectively. The imaging and quantification of interface locations with significant surface potential and work function response (<0.33 eV for material thickness <1 nm) show also a dependency on the crystalline state of the organic systems. The work function mapping suggests space-charge carrier regions of about 4 nm at the organic interface. This reveals rich spatial electric parameters and ambipolar characteristics that may drive electrical performance at device scales, opening a realm of possibilities toward the development of functional organic architectures and its applications.

Predicting carbon benefits from climate-smart agriculture: High-resolution carbon mapping and uncertainty assessment in El Salvador.

Agroforestry management in smallholder agriculture can provide climate change mitigation and adaptation benefits and has been promoted as 'climate-smart agriculture' (CSA), yet has generally been left out of international and voluntary carbon (C) mitigation agreements. A key reason for this omission is the cost and uncertainty of monitoring C at the farm scale in heterogeneous smallholder landscapes. A largely overlooked alternative is to monitor C at more aggregated scales and develop C contracts with groups of land owners, community organizations or C aggregators working across entire landscapes (e.g., watersheds, communities, municipalities, etc.). In this study we use a 100-km2 agricultural area in El Salvador to demonstrate how high-spatial resolution optical satellite imagery can be used to map aboveground woody biomass (AGWB) C at the landscape scale with very low uncertainty (95% probability of a deviation of less than 1%). Uncertainty of AGWB-C estimates remained low (<5%) for areas as small as 250 ha, despite high uncertainties at the farm and plot scale (34-99%). We estimate that CSA adoption could more than double AGWB-C stocks on agricultural lands in the study area, and that utilizing AGWB-C maps to target denuded areas could increase C gains per unit area by 46%. The potential value of C credits under a plausible adoption scenario would range from $38,270 to $354,000 yr-1 for the study area, or about $13 to $124 ha-1 yr-1, depending on C prices. Considering farm sizes in smallholder landscapes rarely exceed 1-2 ha, relying solely on direct C payments to farmers may not lead to widespread CSA adoption, especially if farm-scale monitoring is required. Instead, landscape-scale approaches to C contracting, supported by satellite-based monitoring methods such as ours, could be a key strategy to reduce costs and uncertainty of C monitoring in heterogeneous smallholder landscapes, thereby incentivizing more widespread CSA adoption.

Chemisorption of exchange-coupled [Ni2L(dppba)]+ complexes on gold by using ambidentate 4-(diphenylphosphino)benzoate co-ligands.

A new strategy for the fixation of redox-active dinickel(II) complexes with high-spin ground states to gold surfaces was developed. The dinickel(II) complex [Ni2L(Cl)]ClO4 (1ClO4), in which L(2-) represents a 24-membered macrocyclic hexaaza-dithiophenolate ligand, reacts with ambidentate 4-(diphenylphosphino)benzoate (dppba) to form the carboxylato-bridged complex [Ni2L(dppba)](+), which can be isolated as an air-stable perchlorate [Ni2L(dppba)]ClO4 (2ClO4) or tetraphenylborate [Ni2L(dppba)]BPh4 (2BPh4) salt. The auration of 2ClO4 was probed on a molecular level, by reaction with AuCl, which leads to the monoaurated Ni(II)2Au(I) complex [Ni(II)2L(dppba)Au(I)Cl]ClO4 (3ClO4). Metathesis of 3ClO4 with NaBPh4 produces [Ni(II)2L(dppba)Au(I)Ph]BPh4 (4BPh4), in which the Cl(-) is replaced by a Ph(-) group. The complexes were fully characterized by ESI mass spectrometry, IR and UV/Vis spectroscopy, X-ray crystallography (2BPh4 and 4BPh4), cyclic voltammetry, SQUID magnetometry and HF-ESR spectroscopy. Temperature-dependent magnetic susceptibility measurements reveal a ferromagnetic coupling J = +15.9 and +17.9 cm(-1) between the two Ni(II) ions in 2ClO4 and 4BPh4 (H = -2 JS1S2). HF-ESR measurements yield a negative axial magnetic anisotropy (D<0), which implies a bistable (easy axis) magnetic ground state. The binding of the [Ni2L(dppba)]ClO4 complex to gold was ascertained by four complementary surface analytical methods: contact angle measurements, atomic-force microscopy, X-ray photoelectron spectroscopy, and spectroscopic ellipsometry. The results indicate that the complexes are attached to the Au surface through coordinative Au-P bonds in a monolayer.

Tuning resistive switching on single-pulse doped multilayer memristors.

Short-period multilayers containing ultrathin atomic layers of Al embedded in titanium dioxide (TiO(2)) film-here called single-pulse doped multilayers-are fabricated by atomic layer deposition (ALD) growth methods. The approach explored here is to use Al atoms through single-pulsed deposition to locally modify the chemical environment of TiO(2) films, establishing a chemical control over the resistive switching properties of metal/oxide/metal devices. We show that this simple methodology can be employed to produce well-defined and controlled electrical characteristics on oxide thin films without compound segregation. The increase in volume of the embedded Al(2)O(3) plays a crucial role in tuning the conductance of devices, as well as the switching bias. The stacking of these oxide compounds and their use in electrical devices is investigated with respect to possible crystalline phases and local compound formation via chemical recombination. It is shown that our method can be used to produce compounds that cannot be synthesized a priori by direct ALD growth procedures but are of interest due to specific properties such as thermal or chemical stability, electrical resistivity or electric field polarization possibilities. The monolayer doping discussed here impacts considerably on the broadening of the spectrum of performance and technological applications of ALD-based memristors, allowing for additional degrees of freedom in the engineering of oxide devices.

High-performance organic nanomembrane based sensors for rapid in situ acid detection.

Here, we demonstrate the fabrication, characterization, and tailoring of porous organic nanomembranes and their direct integration on inorganic substrates for sensing applications. The chemically prepared nanomembranes can be integrated on both conducting and insulating substrates by either transfer or direct synthesis. We also successfully demonstrate their use for the detection of commonly used acids including HCl, H(2)SO(4), or H(3)PO(4) and their respective counterions, chlorides, sulfates, and phosphates. Impressively, the in situ acid detection is achieved down to 5 nmol·L(-1), while the quantification is feasible between 5 µmol·L(-1) and 10 mmol·L(-1). These values are among the lowest values reported so far in literature. Furthermore, the organic nanomembrane based sensor covers a wide concentration range of almost 8 orders of magnitude including the environmental limits currently adopted.

Sense of Coherence and Work Stress or Well-Being in Care Professionals: A Systematic Review.

Job-related stress affects the physical and psychological health of professionals dedicated to care. This work is a systematic review that aims to determine the relationships between a sense of coherence (SOC) and work stress and well-being perceived by care professionals. The review was carried out following the PRISMA guidelines, and the search was carried out using the Web of Science (WoS), PubMed, and Scopus databases, obtaining a final selection of 41 articles. The results indicate that stress, depression, burnout, and posttraumatic stress disorder (PTSD) negatively correlate with SOC; in contrast, job satisfaction, well-being, and quality of life positively correlate with SOC. It is concluded that SOC could act as a mediating variable and as a predictor variable of these health problems.

Synthesis, spectroscopic characterization and thermogravimetric analysis of two series of substituted (metallo)tetraphenylporphyrins.

Subsequent treatment of H2TPP(CO2H)4 (tetra(p-carboxylic acid phenyl)porphyrin, 1) with an excess of oxalyl chloride and HNR2 afforded H2TPP(C(O)NR2)4 (R = Me, 2; iPr, 3) with yields exceeding 80%. The porphyrins 2 and 3 could be converted to the corresponding metalloporphyrins MTPP(C(O)NR2)4 (R = Me/iPr for M = Zn (2a, 3a); Cu (2b, 3b); Ni (2c, 3c); Co (2d, 3d)) by the addition of 3 equiv of anhydrous MCl2 (M = Zn, Cu, Ni, Co) to dimethylformamide solutions of 2 and 3 at elevated temperatures. Metalloporphyrins 2a-d and 3a-d were obtained in yields exceeding 60% and have been, as well as 2 and 3, characterized by elemental analysis, electrospray ionization mass spectrometry (ESIMS) and IR and UV-vis spectroscopy. Porphyrins 2, 2a-d and 3, 3a-d are not suitable for organic molecular beam deposition (OMBD), which is attributed to their comparatively low thermal stability as determined by thermogravimetric analysis (TG) of selected representatives.

(Metallo)porphyrins for potential materials science applications.

The bottom-up approach to replace existing devices by molecular-based systems is a subject that attracts permanently increasing interest. Molecular-based devices offer not only to miniaturize the device further, but also to benefit from advanced functionalities of deposited molecules. Furthermore, the molecules itself can be tailored to allow via their self-assembly the potential fabrication of devices with an application potential, which is still unforeseeable at this time. Herein, we review efforts to use discrete (metallo)porphyrins for the formation of (sub)monolayers by surface-confined polymerization, of monolayers formed by supramolecular recognition and of thin films formed by sublimation techniques. Selected physical properties of these systems are reported as well. The application potential of those ensembles of (metallo)porphyrins in materials science is discussed.

Charge transport in organic nanocrystal diodes based on rolled-up robust nanomembrane contacts.

The investigation of charge transport in organic nanocrystals is essential to understand nanoscale physical properties of organic systems and the development of novel organic nanodevices. In this work, we fabricate organic nanocrystal diodes contacted by rolled-up robust nanomembranes. The organic nanocrystals consist of vanadyl phthalocyanine and copper hexadecafluorophthalocyanine heterojunctions. The temperature dependent charge transport through organic nanocrystals was investigated to reveal the transport properties of ohmic and space-charge-limited current under different conditions, for instance, temperature and bias.

Deposition of exchange-coupled dinickel complexes on gold substrates utilizing ambidentate mercapto-carboxylato ligands.

The chemisorption of magnetically bistable transition metal complexes on planar surfaces has recently attracted increased scientific interest due to its potential application in various fields, including molecular spintronics. In this work, the synthesis of mixed-ligand complexes of the type [NiII2L(L')](ClO4), where L represents a 24-membered macrocyclic hexaazadithiophenolate ligand and L' is a ω-mercapto-carboxylato ligand (L' = HS(CH2)5CO2- (6), HS(CH2)10CO2- (7), or HS(C6H4)2CO2- (8)), and their ability to adsorb on gold surfaces is reported. Besides elemental analysis, IR spectroscopy, electrospray ionization mass spectrometry (ESIMS), UV-vis spectroscopy, and X-ray crystallography (for 6 and 7), the compounds were also studied by temperature-dependent magnetic susceptibility measurements (for 7 and 8) and (broken symmetry) density functional theory (DFT) calculations. An S = 2 ground state is demonstrated by temperature-dependent susceptibility and magnetization measurements, achieved by ferromagnetic coupling between the spins of the Ni(II) ions in 7 (J = +22.3 cm-1) and 8 (J = +20.8 cm-1; H = -2JS1S2). The reactivity of complexes 6-8 is reminiscent of that of pure thiolato ligands, which readily chemisorb on Au surfaces as verified by contact angle, atomic force microscopy (AFM) and spectroscopic ellipsometry measurements. The large [Ni2L] tail groups, however, prevent the packing and self-assembly of the hydrocarbon chains. The smaller film thickness of 7 is attributed to the specific coordination mode of the coligand. Results of preliminary transport measurements utilizing rolled-up devices are also reported.

Fully Integrated Organic Nanocrystal Diode as High Performance Room Temperature NO2 Sensor.

Organic diodes consisting of molecular nano-pyramid structures sandwiched between metal and strained nano-membrane electrodes are created. The robust and smooth contacts provided by self-curled metal layers render the molecular nano-pyramids efficent channels for detecting nitrogen dioxide airflow.

Chemical stabilization and improved thermal resilience of molecular arrangements: possible formation of a surface network of bonds by multiple pulse atomic layer deposition.

In this work, we make use of an atomic layer deposition (ALD) surface reaction based on trimethyl-aluminum (TMA) and water to modify O-H terminated self-assembled layers of octadecylphosphonic acid (OPA). The structural modifications were investigated by X-ray reflectivity, X-ray diffraction, and atomic force microscopy. We observed a significant improvement in the thermal stability of ALD-modified molecules, with the existence of a supramolecular packing structure up to 500 °C. Following the experimental observations, density functional theory (DFT) calculations indicate the possibility of formation of a covalent network with aluminum atoms connecting OPA molecules at terrace surfaces. Chemical stability is also achieved on top of such a composite surface, inhibiting further ALD oxide deposition. On the other hand, in the terrace edges, where the covalent array is discontinued, the chemical conditions allow for oxide growth. Analysis of the DFT results on band structure and density of states of modified OPA molecules suggests that besides the observed thermal resilience, the dielectric character of OPA layers is preserved. This new ALD-modified OPA composite is potentially suitable for applications such as dielectric layers in organic devices, where better thermal performance is required.

Optical properties and electrical transport of thin films of terbium(III) bis(phthalocyanine) on cobalt.

The optical and electrical properties of terbium(III) bis(phthalocyanine) (TbPc2) films on cobalt substrates were studied using variable angle spectroscopic ellipsometry (VASE) and current sensing atomic force microscopy (cs-AFM). Thin films of TbPc2 with a thickness between 18 nm and 87 nm were prepared by organic molecular beam deposition onto a cobalt layer grown by electron beam evaporation. The molecular orientation of the molecules on the metallic film was estimated from the analysis of the spectroscopic ellipsometry data. A detailed analysis of the AFM topography shows that the TbPc2 films consist of islands which increase in size with the thickness of the organic film. Furthermore, the cs-AFM technique allows local variations of the organic film topography to be correlated with electrical transport properties. Local current mapping as well as local I-V spectroscopy shows that despite the granular structure of the films, the electrical transport is uniform through the organic films on the microscale. The AFM-based electrical measurements allow the local charge carrier mobility of the TbPc2 thin films to be quantified with nanoscale resolution.

Forming-free resistive switching in multiferroic BiFeO3 thin films with enhanced nanoscale shunts.

A controlled shunting of polycrystalline oxide thin films on the nanometer length scale opens the door to significantly modify their transport properties. In this paper, the low energy Ar(+) irradiation induced shunting effect of forming-free, non-volatile resistive switching in polycrystalline BiFeO3 thin film capacitor-like structures with macroscopic bottom and top contacts was investigated. Oxygen atoms at the BiFeO3 surface are preferentially sputtered by Ar(+) ion irradiation and oxygen vacancies and a metallic Bi phase are formed at the surface of the BiFeO3 thin film before deposition of the top contacts. A phenomenological model is that of nanoscale shunt resistors formed in parallel to the actual BiFeO3 thin film capacitor-like structure. This model fits the noticeable increase of the retention stability and current density after irradiation. The formation of stable and conductive shunts is further evidenced by conductive atomic force microscopy measurements.

Sketched oxide single-electron transistor.

Devices that confine and process single electrons represent an important scaling limit of electronics. Such devices have been realized in a variety of materials and exhibit remarkable electronic, optical and spintronic properties. Here, we use an atomic force microscope tip to reversibly 'sketch' single-electron transistors by controlling a metal-insulator transition at the interface of two oxides. In these devices, single electrons tunnel resonantly between source and drain electrodes through a conducting oxide island with a diameter of ∼1.5 nm. We demonstrate control over the number of electrons on the island using bottom- and side-gate electrodes, and observe hysteresis in electron occupation that is attributed to ferroelectricity within the oxide heterostructure. These single-electron devices may find use as ultradense non-volatile memories, nanoscale hybrid piezoelectric and charge sensors, as well as building blocks in quantum information processing and simulation platforms.