Electron Accumulative Molecules.

With the goal to produce molecules with high electron accepting capacity and low reorganization energy upon gaining one or more electrons, a synthesis procedure leading to the formation of a B-N(aromatic) bond in a cluster has been developed. The research was focused on the development of a molecular structure able to accept and release a specific number of electrons without decomposing or change in its structural arrangement. The synthetic procedure consists of a parallel decomposition reaction to generate a reactive electrophile and a synthesis reaction to generate the B-N(aromatic) bond. This procedure has paved the way to produce the metallacarboranylviologen [M(C2B9H11)(C2B9H10)-NC5H4-C5H4N-M'(C2B9H11)(C2B9H10)] (M = M' = Co, Fe and M = Co and M' = Fe) and semi(metallacarboranyl)viologen [3,3'-M(8-(NC5H4-C5H4N-1,2-C2B9H10)(1',2'-C2B9H11)] (M = Co, Fe) electron cumulative molecules. These molecules are able to accept up to five electrons and to donate one in single electron steps at accessible potentials and in a reversible way. By targeted synthesis and corresponding electrochemical tests each electron transfer (ET) step has been assigned to specific fragments of the molecules. The molecules have been carefully characterized, and the electronic communication between both metal centers (when this situation applies) has been definitely observed through the coplanarity of both pyridine fragments. The structural characteristics of these molecules imply a low reorganization energy that is a necessary requirement for low energy ET processes. This makes them electronically comparable to fullerenes, but on their side, they have a wide range of possible solvents. The ET from one molecule to another has been clearly demonstrated as well as their self-organizing capacity. We consider that these molecules, thanks to their easy synthesis, ET, self-organizing capacity, wide range of solubility, and easy processability, can find important application in any area where ET is paramount.

Magneto-Structural Properties and Theoretical Studies of a Family of Simple Heterodinuclear Phenoxide/Alkoxide Bridged MnIIILnIII Complexes: On the Nature of the Magnetic Exchange and Magnetic Anisotropy.

A family of MnIIILnIII strictly dinuclear complexes of general formula [MnIII(µ-L)(µ-OMe)(NO3)LnIII(NO3)2(MeOH)] (LnIII = Gd, Dy, Er, Ho) has been assembled in a one pot synthesis from a polydentate, multipocket aminobis(phenol)ligand [6,6'-{(2-(1-morpholyl)ethylazanediyl)bis(methylene)}bis(2-methoxy-4-methylphenol)], Mn(NO3)2·4H2O, Ln(NO3)3· nH2O, and NEt3 in MeOH. These compounds represent the first examples of fully structurally and magnetically characterized dinuclear MnIIILnIII complexes. Single X-ray diffraction studies reveal that all complexes are isostructural, consisting of neutral dinuclear molecules where the MnIII and LnIII metal ions, which exhibit distorted octahedral MnN2O4 and distorted LnO9 coordination spheres, are linked by phenoxide/methoxide double bridging groups. Static magnetic studies show that the MnIIIGdIII derivative exhibits a weak antiferromagnetic interaction between the metal ions, with a negative axial zero-field splitting D parameter. The MnIIIGdIII complex shows a notable magnetocaloric effect with magnetic entropy change at 5 T and 3 K of -Δ Sm = 16.8 J kg-1 K-1. Theoretical studies were performed to support the sign and magnitude of the magnetic anisotropy of the MnIII ion ( ab initio), to predict the value and nature of JMnGd, to disclose the mechanism of magnetic coupling, and to establish magneto-structural correlations (DFT calculations). The results of these calculations are corroborated by quantum theory of atoms in molecule analysis (QTAIM). Finally, MnIII-DyIII and MnIII-ErIII complexes show field-induced slow relaxation of the magnetization but without reaching a maximum above 2 K in the out-of-phase ac susceptibility. Ab initio calculations were also performed on MnIII-DyIII/HoIII systems to unravel the origin behind the weak SMM characteristics of the molecules possessing two strongly anisotropic ions. The mechanism of magnetic relaxation was developed, revealing a large QTM/tunnel splitting at the single-ion level. Furthermore, the anisotropy axes of the MnIII and LnIII ions were calculated to be noncollinear, leading to reduction of the overall anisotropy in the molecules. Hence, the herein reported complexes demonstrate that a combination of two anisotropic metal ions does not guarantee SMM behavior.

Carboranylphosphinic Acids: A New Class of Purely Inorganic Ligands.

Purely inorganic carboranyl phosphinates were prepared, and the influence of the cluster on the reactivity of the phosphinate group was studied. Electron-withdrawal by the carboranyl carbon atoms, combined with space-filling efficiency and enhanced aromaticity of the cluster cage, renders the phosphorus more difficult to oxidize. This enables carboranyl phosphinates to survive harsh oxidizing conditions, a property which is uncommon in organic phosphinates.

Synthesis of globular precursors.

o-Carborane (C2 B10 H12 ) was adapted to perform as the core of globular macromolecules, dendrons or dendrimers. To meet this objective, precisely defined substitution patterns of terminal olefin groups on the carborane framework were subjected to Heck cross-coupling reactions or hydroboration leading to hydroxyl terminated arms. These led to new terminal groups (chloro, bromo, and tosyl leaving groups, organic acid, and azide) that permitted ester production, click chemistry, and oxonium ring opening to be performed as examples of reactions that demonstrate the wide possibilities of the globular icosahedral carboranes to produce new dendritic or dendrimer-like structures. Polyanionic species were obtained in high yield through the ring-opening reaction of cyclic oxonium compound [3,3'-Co(8-C4 H8 O2 -1,2-C2 B9 H10 )(1',2'-C2 B9 H11 )] by using terminal hydroxyl groups as nucleophiles. These new polyanionic compounds that contain multiple metallacarborane clusters at their periphery may prove useful as new classes of compounds for boron neutron capture therapy with enhanced water solubility and as cores to make a new class of high-boron globular macromolecules.

Towards multifunctional materials incorporating elastomers and reversible redox-active fragments.

This paper presents a novel and unique feature of metallacarboranes, consisting of the linkage of this redox electro-active site to a stretchable polymer. This is based on polyTHF, a known and applied material. This hybrid material has the two ends functionalized: one with the aforementioned redox molecule and the other with a terminal OH group, both linked by a molecular spring. Moreover, the redox electro-active molecules can be synthesized with either cobalt (cobaltabisdicarbollide) or with iron (ferrabisdicarbollide), species whose respective E(1/2) value differs by almost 1 V. The polymerization mechanism, based on an intermediate molecular crystal structure, is explained through an unexpected cyclization process of the dioxanate derivative of the metallacarboranes with an additional THF molecule. This is achieved in the absence of any metal or external electrophile. Surface functionalization of a Pt electrode by the electropolymerization of pyrrole doped with the pristine metallacarboranes and with the polyTHF hybrid materials is reported in this paper.

Two C3 -symmetric Dy3III complexes with triple di-µ-methoxo-µ-phenoxo bridges, magnetic ground state, and single-molecule magnetic behavior.

Two series of isostructural C(3)-symmetric Ln(3) complexes Ln(3)⋅[BPh(4)] and Ln(3)⋅0.33[Ln(NO(3))(6)] (in which Ln(III) =Gd and Dy) have been prepared from an amino-bis(phenol) ligand. X-ray studies reveal that Ln(III) ions are connected by one µ(2)-phenoxo and two µ(3)-methoxo bridges, thus leading to a hexagonal bipyramidal Ln(3)O(5) bridging core in which Ln(III) ions exhibit a biaugmented trigonal-prismatic geometry. Magnetic susceptibility studies and ab initio complete active space self-consistent field (CASSCF) calculations indicate that the magnetic coupling between the Dy(III) ions, which possess a high axial anisotropy in the ground state, is very weakly antiferromagnetic and mainly dipolar in nature. To reduce the electronic repulsion from the coordinating oxygen atom with the shortest Dy-O distance, the local magnetic moments are oriented almost perpendicular to the Dy(3) plane, thus leading to a paramagnetic ground state. CASSCF plus restricted active space state interaction (RASSI) calculations also show that the ground and first excited state of the Dy(III) ions are separated by approximately 150 and 177 cm(-1), for Dy(3)⋅[BPh(4)] and Dy(3)⋅0.33[Dy(NO(3))(6)], respectively. As expected for these large energy gaps, Dy(3)⋅[BPh(4)] and Dy(3)⋅0.33[Dy(NO(3)(6)] exhibit, under zero direct-current (dc) field, thermally activated slow relaxation of the magnetization, which overlap with a quantum tunneling relaxation process. Under an applied Hdc field of 1000 Oe, Dy(3)⋅[BPh(4)] exhibits two thermally activated processes with U(eff) values of 34.7 and 19.5 cm(-1), whereas Dy(3)⋅0.33[Dy(NO(3))(6)] shows only one activated process with Ueff =19.5 cm(-1).

Aqueous self-assembly and cation selectivity of cobaltabisdicarbollide dianionic dumbbells.

The anion [3,3'-Co(C2B9H11)2](-) ([COSAN](-)) produces aggregates in water. These aggregates are interpreted to be the result of C-H⋅⋅⋅H-B interactions. It is possible to generate aggregates even after the incorporation of additional functional groups into the [COSAN](-) units. The approach is to join two [COSAN](-) anions by a linker that can adapt itself to act as a crown ether. The linker has been chosen to have six oxygen atoms, which is the ideal number for K(+) selectivity in crown ethers. The linker binds the alkaline metal ions with different affinities; thus showing a distinct degree of selectivity. The highest affinity is shown towards K(+) from a mixture containing Li(+), Na(+), K(+), Rb(+) and Cs(+); this can be indicative of pseudo-crown ether performance of the dumbbell. One interesting possibility is that the [COSAN](-) anions at the two ends of the linker can act as a hook-and-loop fastener to close the ring. This facet is intriguing and deserves further consideration for possible applications. The distinct affinity towards alkaline metal ions is corroborated by solubility studies and isothermal calorimetry thermograms. Furthermore, cryoTEM micrographs, along with light scattering results, reveal the existence of small self-assemblies and compact nanostructures ranging from spheres to single-/multi-layer vesicles in aqueous solutions. The studies reported herein show that these dumbbells can have different appearances, either as molecules or aggregates, in water or lipophilic phases; this offers a distinct model as drug carriers.

Fluorescence of new o-carborane compounds with different fluorophores: can it be tuned?

Two sets of o-carborane derivatives incorporating fluorene and anthracene fragments as fluorophore groups have been successfully synthesized and characterized, and their photophysical properties studied. The first set, comprising fluorene-containing carboranes 6-9, was prepared by catalyzed hydrosilylation reactions of ethynylfluorene with appropriate carboranylsilanes. The compound 1-[(9,9-dioctyl-fluorene-2-yl)ethynyl]carborane (11) was synthesized by the reaction of 9,9-dioctyl-2-ethynylfluorene and decaborane (B10H14). Furthermore, reactions of the lithium salt of 11 with 1 equivalent of 4-(chloromethyl)styrene or 9-(chloromethyl)anthracene yielded compounds 12 and 13. Members of the second set of derivatives, comprising anthracene-containing carboranes, were synthesized by reactions of monolithium or dilithium salts of 1-Me-1,2-C2B10H11, 1-Ph-1,2-C2B10H11, and 1,2-C2B10H12 with 1 or 2 equivalents of 9-(chloromethyl)anthracene, respectively, to produce compounds 14-16. In addition, 2 equivalents of the monolithium salts of 1-Me-1,2-C2B10H11 (Me-o-carborane) and 1-Ph-1,2-C2B10H11 (Ph-o-carborane) were reacted with 9,10-bis(chloromethyl)anthracene to produce compounds 17 and 18, respectively. Fluorene derivatives 6-9 exhibit moderate fluorescence quantum yields (32-44 %), whereas 11-13, in which the fluorophore is bonded to the Ccluster (Cc), show very low emission intensity (6 %) or complete fluorescence quenching. The anthracenyl derivatives containing the Me-o-carborane moiety exhibit notably high fluorescence emissions, with ϕF = 82 and 94 %, whereas their Ph-o-carborane analogues are not fluorescent at all. For these compounds, we have observed a correlation between the Cc-Cc bond length and the fluorescence intensity in CH2Cl2 solution, comparable to that observed for previously reported styrene-containing carboranes. Thus, our hypothesis is that for systems of this type the fluorescence may be tuned and even predicted by changing the substituent on the adjacent Cc.

Asymmetric synthesis of chloroisothreonine derivatives via syn-stereoselective Mannich-type additions across N-sulfinyl-α-chloroimines.

Mannich-type reactions of O-Boc glycolic esters across chiral N-sulfinyl-α-chloroaldimines resulted in the efficient and syn-stereoselective synthesis of new γ-chloro-α-hydroxy-ß-amino esters (dr > 99 : 1). The α-coordinating ability of the chlorine atom was of great importance for the diastereoselectivity of the Mannich-type reaction and overruled the chelation of the sulfinyl oxygen with the lithium ion of the incoming E-enolate in the transition state model. These novel chloroisothreonine derivatives proved to be excellent building blocks in asymmetric synthesis of novel syn-ß,γ-aziridino-α-hydroxy esters and biologically relevant trans-oxazolidinone carboxylic esters.

Stereoselective synthesis and cytoselective toxicity of monoterpene-fused 2-imino-1,3-thiazines.

Starting from pinane-, apopinane- and carane-based 1,3-amino alcohols obtained from monoterpene-based ß-amino acids, a library of monoterpene-fused 2-imino-1,3-thiazines as main products and 2-thioxo-1,3-oxazines as side-products were prepared via two- or three-step syntheses. When thiourea adducts prepared from 1,3-amino alcohols and aryl isothiocyanates were reacted with CDI under mild conditions, O-imidazolylcarbonyl intermediates were isolated which could be transformed to the desired 1,3-thiazines under microwave conditions. 1,3-Thiazines and 2-thioxo-1,3-oxazine side-products could also be prepared in one-step reactions through the application of CDI and microwave irradiation. The ring-closure process was extended to cycloalkane-based γ-hydroxythioureas. The carane- and apopinane-based derivatives exhibited marked antiproliferative activity against a panel of human adherent cancer cell lines (HeLa, A2780, MCF7 and A431).

Stereoselective synthesis of perillaldehyde-based chiral ß-amino acid derivatives through conjugate addition of lithium amides.

The Michael addition of dibenzylamine to (+)-tert-butyl perillate (3) and to (+)-tert-butyl phellandrate (6), derived from (S)-(-)-perillaldehyde (1), resulted in diastereomeric ß-amino esters 7A-D in a moderately stereospecific reaction in a ratio of 76:17:6:1. After separation of the diastereoisomers, the major product, cis isomer 7A, was quantitatively isomerized to the minor component, trans-amino ester 7D. All four isomers were transformed to the corresponding ß-amino acids 10A-D, which are promising building blocks for the synthesis of ß-peptides and 1,3-heterocycles in three steps. The steric effects of the isopropyl group at position 4 and of the α-methyl substituent of (R)-N-benzyl-N-α-methylbenzylamine on the reactivity were also studied and, upon application of a chiral amine, excellent stereoselectivity of the conjugate addition was observed. Amino ester 11 was obtained as a single product and transformed to the corresponding amino acids 10A and 10D in good yields on the gram scale.

A versatile methodology for the controlled synthesis of photoluminescent high-boron-content dendrimers.

Fluorescent star-shaped molecules and dendrimers with a 1,3,5-triphenylbenzene moiety as the core and 3 or 9 carborane derivatives at the periphery, have been prepared in very good yields by following different approaches. One procedure relies on the nucleophilic substitution of Br groups in 1,3,5-tris(4-(3-bromopropoxy)phenyl)benzene with the monolithium salts of methyl and phenyl-o-carborane. The second method is the hydrosilylation reactions on the peripheral allyl ether functions of 1,3,5-tris(4-allyloxy-phenyl)benzene and 1,3,5-tris(4-(3,4,5-trisallyloxybenzyloxy)phenyl)benzene with suitable carboranyl-silanes to produce different generations of dendrimers decorated with carboranyl fragments. This approach is very versatile and allows one to introduce long spacers between the fluorescent cores and the boron clusters, as well as to obtain a high loading of boron clusters. The removal of one boron atom from each cluster leads to high-boron-content water-soluble macromolecules. Thermogravimetric analyses show a higher thermal stability for the three-functionalized compounds than for those containing 9 clusters. All compounds exhibit photoluminescent properties at room temperature under ultraviolet irradiation with high quantum yields; these depend on the nature of the cluster and the substituent on the C(cluster). Cyclic voltammetry indicates that there is no electronic communication between the core and the peripheral carboranyl fragments. Due to the high boron content of these molecules, we currently focus our research on their biocompatibility, biodistribution in cells cultures, and potential applications for boron neutron capture therapy (BNCT).

Uranyl complexes of alkyl-bridged ditopic diaminotetraphenol ligands and their use as uranyl ion extractors.

The coordination chemistry of uranyl ions was studied using long n-alkyl chain (n = 5-8) bridged by N,N,N',N'-tetrakis(2-hydroxy-3-methyl-5-tert-butylbenzyl)diaminoalkanes (H4L1-H4L4) as ligands. All ligands formed 2:1 (U-to-L ratio) complexes with uranyl ions, but in addition 1:1 complexes could be characterized using ligands H4L2 and H4L3. The complexes were characterized by elemental analysis, spectroscopy (IR and NMR), and X-ray diffraction. The 2:1 complexes are of two types: [(UO2)2(H2Lm)(NO3)2(solvent)2] (m = 1 and 2; solvent = ethanol or propanol) or (cation)2[(UO2)2(H2Lm)(NO3)2(anion)2]·xsolvent (m = 2 and 4; cation = triethylammonium, anion = nitrate or thiocyanate, and solvent = dichloromethane and acetonitrile; x = 1 or 2). The 1:1 complexes have the formula [(UO2)2(H2Lm)2] (m = 2 and 3). In the solid state, 2:1 complexes are almost in a linear conformation with the uranyl ion at both ends of the ligand. The 1:1 complexes are cyclic dinuclear molecules. Preliminary studies of the ligands as uranyl ion extractors from water to dichloromethane were also performed. A high extraction efficiency was observed with H4L3 for uranyl ions, and in the presence of Cu(II), Ni(II), Co(II), and Zn(II) ions, a good extraction selectivity for uranyl ions was found with H4L1.

Structural diversity due to amino alcohol ligands leading to rare µ4-hydroxo-bridged tetranuclear and "bicapped cubane" cores in copper(II) complexes: a theoretical and experimental magnetostructural study.

The µ4-hydroxo- and alkoxo-bridged tetranuclear copper(II) complexes, [Cu4(µ4-OH)(dmae)4][Ag(NO3)4] (1), [Cu4(µ4-OH)(dmae)4][Na(NO3)4] (2), [Cu4(µ4-OH)(dmae)4][K(NO3)4] (3), and hexanuclear alkoxo-bridged "bicapped cubane" copper(II) complex [Cu6(ae)8(ClO4)2](ClO4)2·MeOH (8) (dmae = N,N-dimethylaminoethanolato and ae = 2-aminoethanolato) were synthesized via self-assembly from chelating amino alcohols and copper(II), silver (1), sodium (2), and potassium (3) nitrates or copper(II) perchlorate (8). The complexes are characterized by elemental analyses, single-crystal X-ray diffraction, and variable temperature magnetic measurements. The crystal structures of complexes 1-3 consist of almost planar tetranuclear [Cu4(µ4-OH)(dmae)4](3+) units, in which Cu(II) ions are also weakly bonded to nitrate anions. The adjacent tetranuclear units of 1-3 are connected by ionic interactions between nitrate anions and sodium, potassium, or silver cations resulting in the formation of 1D polymers. The crystal structure of 8 consists of hexanuclear [Cu6(ae)8](4+) "bicapped cubane" units, in which the capping Cu(II) ions are weakly bonded to perchlorate anions. The adjacent hexanuclear units of 8 are connected by hydrogen bonds resulting in the formation of 3D hydrogen bonded networks. Also the results from the synthetic studies leading to the formation of new copper(II) and silver(I) complexes (4-7) using Hae, 3-aminopropanol (Hap), and N,N-dimethylaminopropanol (Hdmap) in similar reactions, which gave tetra- and hexanuclear complexes, are presented. Experimental magnetic studies showed that complexes 1 and 2 exhibit dominant antiferromagnetic coupling leading to an S = 0 ground state, whereas 8 exhibits a large dominant antiferromagnetic interaction between the capping copper atoms and the copper atoms of the top and bottom faces of the cubane unit that define two isosceles triangles. This interaction leads to an S = 1/2 ground state for each triangle. The weak ferromagnetic interaction between these doublet states through the cubane unit leads to a triplet S = 1 ground state for 8. The values of the magnetic exchange coupling constant were the following: J = +1.8 (1) and +2.9 cm(-1) (2) between adjacent copper atoms; J' = -29.2 (1) and -32.2 cm(-1) (2) between opposite copper atoms; J = -297.6 cm(-1) and zJ' = +0.07 cm(-1) (8). Magnetic coupling constants calculated for 2 and 8 by DFT methods are in general of the same nature and magnitude as the experimental ones.

Heptacoordinated molybdenum(VI) complexes of phenylenediamine bis(phenolate): a stable molybdenum amidophenoxide radical.

The syntheses, crystallographic structures, magnetic properties, and theoretical studies of two heptacoordinated molybdenum complexes with N,N'-bis(3,5-di-tert-butyl-2-hydroxyphenyl)-1,2-phenylenediamine (H4N2O2) are reported. A formally molybdenum(VI) complex [Mo(N2O2)Cl2(dmf)] (1) was synthesized by the reaction between [MoO2Cl2(dmf)2] and H4N2O2, whereas the other molybdenum(VI) complex [Mo(N2O2)(HN2O2)] (2) was formed when [MoO2(acac)2] was used as a molybdenum source. Both complexes represent a rare case of the Mo(VI) ion without any multiply bonded terminal ligands. In addition, molecular structures, magnetic measurements, ESR spectroscopy, and density functional theory calculations indicate that complex 2 is the first stable molybdenum(VI) amidophenoxide radical.

Ferromagnetic dinuclear mixed-valence Mn(II)/Mn(III) complexes: building blocks for the higher nuclearity complexes. structure, magnetic properties, and density functional theory calculations.

A series of six mixed-valence Mn(II)/Mn(III) dinuclear complexes were synthesized and characterized by X-ray diffraction. The reactivity of the complexes was surveyed, and structures of three additional trinuclear mixed-valence Mn(III)/Mn(II)/Mn(III) species were resolved. The magnetic properties of the complexes were studied in detail both experimentally and theoretically. All dinuclear complexes show ferromagnetic intramolecular interactions, which were justified on the basis of the electronic structures of the Mn(II) and Mn(III) ions. The large Mn(II)-O-Mn(III) bond angle and small distortion of the Mn(II) cation from the ideal square pyramidal geometry were shown to enhance the ferromagnetic interactions since these geometrical conditions seem to favor the orthogonal arrangement of the magnetic orbitals.

Syntheses of four enantiomers of 2,3-diendo- and 3-endo-aminobicyclo[2.2.2]oct-5-ene-2-exo-carboxylic acid and their saturated analogues.

Ethyl 2,3-diendo-3-aminobicyclo[2.2.2]oct-5-ene-2-carboxylate ((±)-1) was resolved with O,O'-dibenzoyltartaric acid via diastereomeric salt formation. The efficient synthesis of the enantiomers of 2,3-diendo-3-aminobicyclo[2.2.2]oct-5-ene-2-carboxylic acid ((+)-7 and (-)-7), 3-endo-aminobicyclo[2.2.2]oct-5-ene-2-exo-carboxylic acid ((+)-5 and (-)-5), cis- and trans-3-aminobicyclo[2.2.2]octane-2-carboxylic acid ((+)-6, (-)-6, (+)-8 and (-)-8) was achieved via isomerization, hydrogenation and hydrolysis of the corresponding esters (-)-1 and (+)-1. The stereochemistry and relative configurations of the synthesized compounds were determined by NMR spectroscopy (based on the 3J(H,H) coupling constants) and X-ray crystallography.

A cocrystal of two Mo(VI) complexes bearing different diastereomers of the 2,4-di-tert-butyl-6-{[(1-oxido-1-phenylpropan-2-yl)(methyl)amino]methyl}phenolate ligand derived from (+)-ephedrine.

The title cocrystal contains two chiral conformational diastereomers, viz. (1S,2R,RN)- and (1S,2R,SN)-, of [2,4-di-tert-butyl-6-{[(1-oxido-1-phenylpropan-2-yl)(methyl)amino]methyl}phenolato](methanol)-cis-dioxidomolybdenum(VI), [Mo(C25H35NO2)O2(CH3OH)], representing the first example of a structurally characterized molybdenum complex with enantiomerically pure ephedrine derivative ligands. The Mo(VI) cations exhibit differently distorted octahedral coordination environments, with two oxide ligands positioned cis to each other. The remainder of the coordination comprises phenoxide, alkoxide and methanol O atoms, with an amine N atom completing the octahedron. The distinct complexes are linked by strong intermolecular O-H···O hydrogen bonds, resulting in one-dimensional molecular chains. Furthermore, the phenyl rings are involved in weak T-shaped/edge-to-face π-π interactions with each other.

Efficient regio- and stereoselective access to novel fluorinated ß-aminocyclohexanecarboxylates.

A regio- and stereoselective method has been developed for the synthesis of novel fluorinated 2-aminocyclohexanecarboxylic acid derivatives with the fluorine attached to position 4 of the ring. The synthesis starts from either cis- or trans-ß-aminocyclohex-4-enecarboxylic acids and involves regio- and stereoselective transformation of the ring C-C double bond through iodooxazine formation and hydroxylation, followed by hydroxy-fluorine or oxo-fluorine exchange.

Synthesis and characterization of new fluorescent styrene-containing carborane derivatives: the singular quenching role of a phenyl substituent.

A set of neutral and anionic carborane derivatives in which the styrenyl fragment is introduced as a fluorophore group has been successfully synthesized and characterized. The reaction of the monolithium salts of 1-Ph-1,2-C(2)B(10)H(11), 1-Me-1,2-C(2)B(10)H(11) and 1,2-C(2)B(10)H(12) with one equivalent of 4-vinylbenzyl chloride leads to the formation of compounds 1-3, whereas the reaction of the dilithium salt of 1,2-C(2)B(10)H(12) with two equivalents of 4-vinylbenzyl chloride gives disubstituted compound 4. The closo clusters were degraded using the classical method, KOH in EtOH, to afford the corresponding nido species, which were isolated as tetramethylammonium salts. The crystal structure of the four closo compounds 1-4 were analyzed by X-ray diffraction. All compounds, except 1, display emission properties, with quantum yields dependent on the nature of the cluster (closo or nido) and the substituent on the second C(cluster) atom. In general, closo compounds 2-4 exhibit high fluorescence emission, whereas the presence of a nido cluster produces a decrease of the emission intensity. The presence of a phenyl group bonded to the C(cluster) results in an excellent electron-acceptor unit that produces a quenching of the fluorescence. DFT calculations have confirmed the charge-separation state in 1 to explain the quenching of the fluorescence and the key role of the carboranyl fragment in this luminescent process.