Insights into Advances and Applications of Biomaterials for Nerve Tissue Injuries and Neurodegenerative Disorders.

The incidence of nerve tissue injuries, such as peripheral nerve injury, spinal cord injury, traumatic brain injury, and various neurodegenerative diseases (NDs), is continuously increasing because of stress, physical and chemical trauma, and the aging population worldwide. Restoration of the damaged nervous system is challenging because of its structural and functional complexity and limited regenerative ability. Additionally, there is no cure available for NDs except for medications that provide symptomatic relief. Stem cells offer an alternative approach for promoting damage repair, but their efficacy is limited by a compromised survival rate and neurogenesis process. To address these challenges, neural tissue engineering has emerged as a promising strategy in which stem cells are seeded or encapsulated within a suitable biomaterial construct, increasing cell survival and neurogenesis. Numerous biomaterials are utilized to create different types of constructs for this purpose. Researchers are trying to develop ideal scaffolds that combine biomaterials, cells, and molecules that exactly mimic the biological and mechanical properties of the tissue to achieve functional recovery associated with neurological dysfunction. This review focuses on exploring the development and applications of different biomaterials for their potential use in the diagnosis, therapy, nerve tissue regeneration, and treatment of neurological disorders.

Advancing sustainable bioplastics: chemical and physical modification of starch films for enhanced thermal and barrier properties.

This study addresses the urgent need for sustainable alternatives to conventional plastics by focusing on modification of thermoplastic starch (TPS) derived from renewable biomass sources. Despite TPS's biodegradability and cost advantages, its limitations in mechanical strength and water resistance prompted the investigation of physical and chemical modifications. Ultrasonication, autoclaving, and cross-linking with substances like citric acid and STMP (sodium trimetaphosphate)/STPP (sodium tripolyphosphate) were employed, with citric acid crosslinking standing out for its significant enhancement of transparency, especially beneficial for packaging applications. Film thickness varied with modification methods, with ultrasonicated films exhibiting thinner structures. Differential scanning calorimetry revealed insights into molecular interactions, with citric acid crosslinked film showing a substantial increase in thermal stability of the polymer at 164 °C, while moisture content analysis showed the impact of ultrasonication on reducing water absorption and citric acid crosslinking enhancing dimensional stability. Water vapor transmission rate data highlighted the effectiveness of ultrasonication in creating films with reduced permeability, and citric acid cross-linked films demonstrated potential for tailored water vapor barrier properties. Static water contact angle results indicated the hydrophobicity of films, with citric acid crosslinked films showing significantly more hydrophobic surfaces. The study also delved into water solubility, emphasizing the influence of depolymerization in ultrasonicated films and strengthened starch networks in crosslinked films, affecting their biodegradability. In conclusion, this comprehensive exploration demonstrates the feasibility of producing robust starch films with improved physicochemical properties through physical and chemical modifications, offering potential solutions in the quest for environmentally friendly alternatives to traditional plastics.

Biosubstitutes for dural closure: Unveiling research, application, and future prospects of dura mater alternatives.

The dura mater, as the crucial outermost protective layer of the meninges, plays a vital role in safeguarding the underlying brain tissue. Neurosurgeons face significant challenges in dealing with trauma or large defects in the dura mater, as they must address the potential complications, such as wound infections, pseudomeningocele formation, cerebrospinal fluid leakage, and cerebral herniation. Therefore, the development of dural substitutes for repairing or reconstructing the damaged dura mater holds clinical significance. In this review we highlight the progress in the development of dural substitutes, encompassing autologous, allogeneic, and xenogeneic replacements, as well as the polymeric-based dural substitutes fabricated through various scaffolding techniques. In particular, we explore the development of composite materials that exhibit improved physical and biological properties for advanced dural substitutes. Furthermore, we address the challenges and prospects associated with developing clinically relevant alternatives to the dura mater.

Bioactive ZnO-assisted 1393 glass scaffold promotes osteogenic differentiation: Some studies.

We developed ZnO-assisted 1393 bioactive glass-based scaffold with suitable mechanical properties through foam replica technique and observed to be suitable for bone tissue engineering application. However, the developed scaffolds' ability to facilitate cellular infiltration and integration was further assessed through in vivo studies in suitable animal model. Herein, the pure 1393 bioactive glass (BG) and ZnO-assisted 1393 bioactive glass- (ZnBGs; 1, 2, 4 mol% ZnO substitution for SiO2 in pure BG is named as Z1BG, Z2BG, Z3BG, respectively) based scaffolds were prepared through sol-gel route, followed by foam replica techniques and characterized by a series of in vitro and some in vivo tests. Different cell lines like normal mouse embryonic cells (NIH/3T3), mouse bone marrow stromal cells (mBMSc), peripheral blood mononuclear cells, that is, lymphocytes and monocytes (PBMC) and U2OS (carcinogenic human osteosarcoma cells) were used in determination and comparative analysis of the biological compatibility of the BG and ZnBGs. Also, the alkaline phosphatase (ALP) activity, and osteogenic gene expression by primer-specific osteopontin (OPN), osteocalcin (OCN), and glyceraldehyde-3-phosphate dehydrogenase (GAPDH) genes were performed to study osteogenic differentiability of the stromal cells in different BGs. Moreover, radiological and histopathological tests were performed in bone defect model of Wister rats to evaluate the in vivo bone regeneration and healing. Interestingly, these studies demonstrate augmented biological compatibility, and superior osteogenic differentiation in ZnBGs, in particular Z3BG than the pure BG in most cases.

Prebiotics: Ignored player in the fight against cancer.

BACKGROUND: Prebiotics is a relatively neglected area in cancer research, despite evidence suggesting that it plays a key role in suppressing tumour growth and improving immune function. RECENT FINDINGS: Including prebiotics in the diet has been shown to strengthen the immune system and can better slow down or prevent the growth of tumours. It has also been strongly indicated in various scientific studies that prebiotics can contribute to the sustenance of a healthy microbiome, which in turn plays an important role in increasing the effectiveness and reducing the side effects of cancer treatments. CONCLUSION: In the present review article we highlight the mechanisms by which prebiotics like inulin, fructooligosaccharide (FOS), ß-glucan, pectin, and xylooligosaccharide (XOS) function. Furthermore, the beneficial effect of incorporating prebiotics during cancer therapy to improvise gut health and prevent/reverse the damage caused to patients due to chemotherapy has also been elaborated.

Biosensors integrated 3D organoid/organ-on-a-chip system: A real-time biomechanical, biophysical, and biochemical monitoring and characterization.

As a full-fidelity simulation of human cells, tissues, organs, and even systems at the microscopic scale, Organ-on-a-Chip (OOC) has significant ethical advantages and development potential compared to animal experiments. The need for the design of new drug high-throughput screening platforms and the mechanistic study of human tissues/organs under pathological conditions, the evolving advances in 3D cell biology and engineering, etc., have promoted the updating of technologies in this field, such as the iteration of chip materials and 3D printing, which in turn facilitate the connection of complex multi-organs-on-chips for simulation and the further development of technology-composite new drug high-throughput screening platforms. As the most critical part of organ-on-a-chip design and practical application, verifying the success of organ model modeling, i.e., evaluating various biochemical and physical parameters in OOC devices, is crucial. Therefore, this paper provides a logical and comprehensive review and discussion of the advances in organ-on-a-chip detection and evaluation technologies from a broad perspective, covering the directions of tissue engineering scaffolds, microenvironment, single/multi-organ function, and stimulus-based evaluation, and provides a more comprehensive review of the progress in the significant organ-on-a-chip research areas in the physiological state.

Generation of graphene oxide and nano-bioglass based scaffold for bone tissue regeneration.

Graphene oxide (GO) offers a distinct opportunity in the field of biomedical engineering owing to its exceptionally high mechanical strength, excellent electrical conductivity, high optical transparency, and favorable biocompatibility. In this article, nanocomposite biocompatible GO-based scaffolds (chitosan/gelatin/nanobioglass/GO) Ch-G-NBG-GO were successfully fabricated through freeze drying technique (-40 °C) and evaluated for various physico-chemical and biological properties. The prepared Ch-G-NBG-GO composites have been investigated for their structural, physiochemical, and surface morphology via x-ray diffraction (XRD), high resolution scanning electron microscope, Fourier transform infrared spectroscopy, thermogravimetric analysis (TGA), energy-dispersive x-ray Spectroscopy and, differential scanning colorimetry (DSC) respectively. The morphological analysis showed the porous interconnected network of scaffold formed. Average pore size for the Ch-G-NBG-GO scaffolds were in between 90 and 120 µm, which was very close to the control scaffolds. XRD data revealed the successful incorporation of NBG and GO and distribution across the scaffolds. Porosity of the fabricated scaffolds were in the range between 75.3% and 77.3% which was very close to the control scaffold with 79% porosity. The studies also reveal that after GO incorporation, the weight loss reduced (0.11 ± 0.02-0.095 ± 0.03), scaffolds were firmly stable at room temperature even after a long duration of 28 d. The crystallinity added to the scaffolds due to addition of GO nanoparticles improved the mechanical strength of these scaffolds. The compressive modulus changed from (5.7 to 8.51) MPa after GO addition. Swelling ratio changed drastically especially in case of Ch-NBG-90%GO (4.9 ± 0.04-4 ± 0.01). DSC and TGA data revealed the thermal stability of GO incorporated scaffolds due to the proper interaction between GO/NBG with chitosan-gelatin blend. The scaffold's potential for bone tissue engineering was evaluated by testing its cytocompatibility for MG-63 cell line. It revealed suitable cell attachment and proliferation of cells compared to the Ch-G-NBG scaffold. MTT assay showed that Ch-G-NBG-GO scaffold below 90% GO concentration possess best biocompatibility. But in case of Ch-G-NBG-90%GO scaffold, the cell proliferation was reduced when compared to control scaffolds. Alkaline phosphatase activity suggested improved osteogenic differentiation of MG-63 cells over GO based scaffolds and this was due to the osteogenic potential of NBG and GO present in the scaffolds. Based on these results, the nano-biocomposite scaffold appears to have the potential for utilization in bone tissue restoration, replacement and regeneration.

Generation of hybrid tissue engineered construct through embedding autologous chondrocyte loaded platelet rich plasma/alginate based hydrogel in porous scaffold for cartilage regeneration.

Over the past decades, various attempts have been made to develop suitable tissue-engineered constructs to repair or regenerate the damaged or diseased articular cartilage. In the present study, we embedded Platelet rich plasma (PRP)/Sodium Alginate (SA) based hydrogel in porous 3D scaffold of chitosan (CH)/chondroitin sulfate (CS)/silk fibroin (SF) to develop hybrid scaffold for cartilage tissue construct generation with abilities to support shape recovery potential, facilitate uniform cells distribution and mimic gel like cartilage tissue extracellular matrix.The developed hybrid matrix shows suitable pore size (55-261 µm), porosity (77 ± 4.3%) and compressive strength (0.13 ± 0.04 MPa) for cartilage tissue construct generation and its applications. The developed SA/PRP-based cartilage construct exhibits higher metabolic activity, glycosaminoglycan deposition, expression of collagen type II, and aggrecan in comparison to SA based cell-scaffold construct. In-vivo animal study was also performed to investigate the biocompatibility and cartilage tissue regeneration potential of the developed construct. The obtained gross analysis of knee sample, micro-computed tomography, and histological analysis suggest that implanted tissue construct possess the superior potential to regenerate hyaline cartilage defect of thickness around 1.10 ± 0.36 mm and integrate with surrounding tissue at the defect site. Thus, the proposed strategy for the development of cartilage tissue constructs might be beneficial for the repair of full-thickness knee articular cartilage defects.

Design strategies for composite matrix and multifunctional polymeric scaffolds with enhanced bioactivity for bone tissue engineering.

Over the past few decades, various bioactive material-based scaffolds were investigated and researchers across the globe are actively involved in establishing a potential state-of-the-art for bone tissue engineering applications, wherein several disciplines like clinical medicine, materials science, and biotechnology are involved. The present review article's main aim is to focus on repairing and restoring bone tissue defects by enhancing the bioactivity of fabricated bone tissue scaffolds and providing a suitable microenvironment for the bone cells to fasten the healing process. It deals with the various surface modification strategies and smart composite materials development that are involved in the treatment of bone tissue defects. Orthopaedic researchers and clinicians constantly focus on developing strategies that can naturally imitate not only the bone tissue architecture but also its functional properties to modulate cellular behaviour to facilitate bridging, callus formation and osteogenesis at critical bone defects. This review summarizes the currently available polymeric composite matrices and the methods to improve their bioactivity for bone tissue regeneration effectively.

Optimization and evaluation of ciprofloxacin-loaded collagen/chitosan scaffolds for skin tissue engineering.

A novel ciprofloxacin-loaded collagen-chitosan scaffold was developed for the treatment of wound using freeze drying method. The average pore size and porosity of developed scaffold was found to be around 125 µm and 91 ± 0.56%. Moreover, swelling, degradation and mechanical tests profile supported the suitability of scaffold for wound healing process. The scaffold has high degree of hemocompatibility towards the blood and promotes the growth, migration and proliferation of fibroblast. The developed scaffold exhibits antibacterial properties and was found to be efficient against the Gram-negative (E.coli) and Gram-positive (Staphylococcus aureus) bacteria hence can be used for wound healing applications. In vivo study demonstrated that the scaffold not only escalated the tissue regeneration time but also accelerated the wound healing process compared to control. The histological studies revealed better granulation, vascularization, and remodeling of extracellular matrix along with regeneration of epidermal and dermal layer of skin. Overall, the obtained results suggested that the developed skin tissue constructs possess the enormous potential for tissue regeneration and might be a suitable biomaterial for skin tissue engineering applications.

Design and evaluation of ciprofloxacin loaded collagen chitosan oxygenating scaffold for skin tissue engineering.

Hypoxia and sepsis are key concerns towards modern regenerative medicine. Oxygen generating biomaterials having antibacterial property aims to answer these concerns. Hypoxia promotes reactive oxygen species at the implant site that delays wound healing. Sepsis in wound also contributes to delay in wound healing. Therefore, scaffold with antibacterial property and oxygen-producing capacities have shown ability to promote wound healing. In the present study oxygen releasing, ciprofloxacin loaded collagen chitosan scaffold was fabricated for sustained oxygen delivery. Calcium peroxide (CPO) acted as a chemical oxygen source. Oxygen release pattern exhibited a sustained release of oxygen with uniform deposition of CPO on the scaffold. The drug release study shows a prolonged, continuous, and sustained release of ciprofloxacin. Cell culture studies depict that scaffold has suitable cell attachment and migration properties for fibroblasts. In vivo studies performed in the skin flip model visually shows better wound healing and less necrosis. Histological studies show the maintenance of tissue architecture and the deposition of collagen. The results demonstrate that the proposed CPO coated ciprofloxacin loaded collagen-chitosan scaffold can be a promising candidate for skin tissue engineering.

Generation of scaffold incorporated with nanobioglass encapsulated in chitosan/chondroitin sulfate complex for bone tissue engineering.

Over the past decade, various composite materials fabricated using natural or synthetic biopolymers incorporated with bioceramic have been widely investigated for the regeneration of segmental bone defect. In the present study, nano-bioglass incorporated osteoconductive composite scaffolds were fabricated through polyelectrolyte complexation/phase separation and resuspension of separated complex in gelatin matrix. Developed scaffold exhibits controlled bioreactivity, minimize abrupt pH rise (~7.8), optimal swelling behavior (2.6+-3.1) and enhances mechanical strength (0.62 ± 0.18 MPa) under wet condition. Moreover, in-vitro cell study shows that the fabricated scaffold provide suitable template for cellular attachment, spreading, biomineralization and collagen based matrix deposition. Also, the developed scaffold was evaluated for biocompatibility and bone tissue regeneration potential through implantation in non-union segmental bone defect created in rabbit animal model. The obtained histological analysis indicates strong potential of the composite scaffold for bone tissue regeneration, vascularization and reconstruction of defects. Thus, the developed composite scaffold might be a suitable biomaterial for bone tissue engineering applications.

Effect of copper nanoparticles on physico-chemical properties of chitosan and gelatin-based scaffold developed for skin tissue engineering application.

Development of new and effective scaffold continues to be an area of intense research in skin tissue engineering. The objective of this study was to study the effect of copper nanoparticles over physico-chemical properties of the chitosan and gelatin composite scaffolds for skin tissue engineering. The copper-doped scaffolds were prepared using freeze-drying method. Chitosan and gelatin were taken in varied composition with 0.01%, 0.02%, and 0.03% Cu nanoparticles. The physico-chemical properties of the copper nanoparticles and the scaffolds were analyzed using Fourier transform infrared spectroscopy (FTIR), X-ray diffraction (XRD), scanning electron microscopy (SEM), and transmission electron microscopy. Porosity of the scaffolds was measured by liquid displacement method and hemocompatibility was tested using goat blood. SEM micrographs of the scaffolds displayed the interconnected pores which ranged between 25 and 40 µm. This average pore size was later enhanced to 95 µm after the addition of copper nanoparticles. Cell viability assay was performed to ensure the growth and proliferation of the skin cells over the scaffolds. FTIR, EDS, and XRD analysis of scaffolds confirmed the presence of copper in the chitosan-based scaffolds. Porosity measurement showed the interconnectivity between pores which ranged between 65 and 88% as required for skin tissue engineering application. The degradation study of the scaffolds was done which depicted that, after the addition of copper nanoparticles with 0.03%, degradation rate was decreased. SEM and cytocompatibility assay on all scaffolds showed the cell adhesion and proliferation on the scaffolds which was not affected after addition of copper nanoparticles. Oxidative stress evaluation was done to study the effect of copper nanoparticles on the cells which showed that there was no such production of ROS in the scaffolds. Hence, scaffolds prepared after doping of copper nanoparticles show suitable physico-chemical and biological properties for skin tissue engineering application.

Design and evaluation of chitosan/chondroitin sulfate/nano-bioglass based composite scaffold for bone tissue engineering.

Chitosan, a natural biopolymer with osteoconductive properties is widely investigated to generate scaffolds for bone tissue engineering applications. However, chitosan based scaffolds lacks in mechanical strength and structural stability in hydrated condition and thereby limits its application for bone tissue regeneration. Thus in the present study, to overcome the limitations associated with chitosan based scaffolds, we fabricated polyelectrolyte complexation mediated composite scaffold of chitosan and chondroitin sulfate incorporated with nano-sized bioglass. Developed scaffolds were successfully characterized for various morphological, physico-chemical, mechanical and apatite forming properties using XRD, FT-IR, FE-SEM and TEM. It was observed that polyelectrolyte complexation followed by incorporation of bioglass significantly enhances mechanical strength, reduces excessive swelling behavior and enhances structural stability of the scaffold in hydrated condition. Also, in-vitro cell adhesion, spreading, viability and cytotoxity were investigated to evaluate the cell supportive properties of the developed scaffolds. Furthermore, alkaline phosphatase activity, biomineralization and collagen type I expression were observed to be significantly higher over the composite scaffold indicating its superior osteogenic potential. More importantly, in-vivo iliac crest bone defect study revealed that implanted composite scaffold facilitate tissue regeneration and integration with native bone tissue. Thus, developed composite scaffold might be a suitable biomaterial for bone tissue engineering applications.

Design and evaluation of chitosan/poly(l-lactide)/pectin based composite scaffolds for cartilage tissue regeneration.

Poor regenerative potential of cartilage tissue due to the avascular nature and lack of supplementation of reparative cells impose an important challenge in recent medical practice towards development of artificial extracellular matrix with enhanced neo-cartilage tissue regeneration potential. Chitosan (CH), poly (l-lactide) (PLLA), and pectin (PC) compositions were tailored to generate polyelectrolyte complex based porous scaffolds using freeze drying method and crosslinked by 1-ethyl-3-(3-dimethylaminopropyl) carbodiimide (EDC), N-hydroxysuccinimide (NHS) solution containing chondroitin sulfate (CS) to mimic the composition as well as architecture of the cartilage extracellular matrix (ECM). The physical, chemical, thermal, and mechanical behaviors of developed scaffolds were done. The scaffolds were porous with homogeneous pore structure with pore size 49-170µm and porosities in the range of 79 to 84%. Fourier transform infrared study confirmed the presence of polymers (CH, PLLA and PC) within the scaffolds. The crystallinity of the scaffold was examined by the X-ray diffraction studies. Furthermore, scaffold shows suitable swelling property, moderate biodegradation and hemocompatibility in nature and possess suitable mechanical strength for cartilage tissue regeneration. MTT assay, GAG content, and attachment of chondrocyte confirmed the regenerative potential of the cell seeded scaffold. The histopathological analysis defines the suitability of scaffold for cartilage tissue regeneration.