First results on transient plasma-based remediation of nanoscale particulate matter in restaurant smoke emissions.

Recent studies have shown that nanoscale particulate matter produced in commercial charbroiling processes represents a serious health hazard and has been linked to various forms of cancer and cardiopulmonary disease. In this study, we propose a highly effective method for treating restaurant smoke emissions using a transient pulsed plasma reactor produced by nanosecond high voltage pulses. We measure the size and relative mass distributions of particulate matter (PM) produced in commercial charbroiling processes (e.g., cooking of hamburger meat) both with and without the plasma treatment. Here, the plasma discharge is produced in a 3" diameter cylindrical reactor with a 5-10 ns high voltage (17 kV) pulse generator. The distribution of untreated nanoparticle sizes is peaked around 125-150 nm in diameter, as measured using a scanning mobility particle sizer (SMPS) spectrometer. With plasma treatment, we observe up to a 55-fold reduction in relative particle mass and a significant reduction in the nanoparticle size distribution using this method. The effectiveness of the nanoscale PM remediation increases with both the pulse repetition rate and pulse voltage, demonstrating the scalability of this approach for treating particulate matter at higher flow rates and larger diameter reactors.

Plasma-enhanced electrostatic precipitation of diesel exhaust particulates using nanosecond high voltage pulse discharge for mobile source emission control.

This study reports enhancement in the electrostatic precipitation (ESP) of diesel engine exhaust particulates using high voltage nanosecond pulse discharge in conjunction with a negative direct current (DC) bias voltage. The high voltage (20 kV) nanosecond pulses produce ion densities that are several orders of magnitude higher than those in the corona produced by a standard DC-only ESP. This plasma-enhanced electrostatic precipitator (PE-ESP) demonstrated 95 % remediation of PM and consumes less than 1 % of the engine power (i.e., 37 kW diesel engine at 75 % load). While the DC-only ESP remediation increases linearly with applied voltage, the plasma-enhanced ESP remains approximately constant over the applied range of negative DC biases. Numerical simulations of the PE-ESP process agree with the DC-only experimental results and enable us to verify the charge-based mechanism of enhancement provided by the nanosecond high voltage pulse plasma. Two different reactor configurations with different flow rates yielded the same remediation values despite one having half the flow rate of the other. This indicates that the reactor can be made even smaller without sacrificing performance. Here, this study finds that the plasma enhancement enables high remediation values at low DC voltages and smaller ESP reactors to be made with high remediation.