RESUMEN
The significant enhancement of acidic potassium permanganate chemiluminescence by Mn(II) results from the concomitant presence of permanganate and Mn(III) in the reagent solution, which enables rapid production of the excited Mn(II) emitter with a wide range of analytes. Furthermore, the key Mn(III) co-reactant can be quickly generated by reducing permanganate with sodium thiosulfate, instead of the slow (~24 h) equilibration required when Mn(ii) is used. The emission from reactions with analytes such as tyrosine and fenoterol was over two orders of magnitude more intense than with the traditional permanganate reagent.
RESUMEN
Constructing flow-through reactors for chemiluminescence detection by machining channels into polymer disks has enabled the exploration of new configurations and materials that can improve signal intensity beyond that attainable with the traditional coiled-tubing design. Several approaches to merge reactant solutions were examined: an intersection, chamber or deeper well in the centre of a serpentine configuration flow-cell (directly in front of a photomultiplier tube), or a confluence point outside the detection zone. For several analytically useful, rapid chemiluminescence reactions, the single-inlet flow-cell with external Y-piece was most suitable, but for others (such as KMnO(4)/Mn(II) with morphine, and [Ir(f-ppy)(2)BPS](-) with fluoroquinolones) the dual-inlet configuration provided greater signals. The introduction of central mixing zones with larger widths than the channel reduced the chemiluminescence response. The reversing turns of a serpentine channel promote efficient mixing and greater chemiluminescence intensities than a spiral channel, but increasing the sharpness of the turns created areas of poor solution flow and decreased the chemiluminescence response. Teflon disks impregnated with glass microspheres increased the chemiluminescence signals by 13%-17%, due to the greater reflection of stray light towards the photodetector.
RESUMEN
Manganese(II) salts catalyze the chemiluminescent oxidation of organic compounds with acidic potassium permanganate. The formation of insoluble manganese(IV) species from the reaction between manganese(II) and permanganate can be prevented with sodium polyphosphate, and therefore, relatively high concentrations of the catalyst can be added to the reagent before the light-producing reaction is initiated. The rapid and intense emissions from these manganese(II) catalyzed chemiluminescence reactions provide highly sensitive detection and greater compatibility with liquid chromatography.
RESUMEN
Three recently reported chemiluminescence methods (based on reactions with alkaline luminol and hexacyanoferrate(III); acidic cerium(IV) and rhodamine B; and acidic permanganate with polyphosphates) for the determination of synephrine were re-evaluated in terms of their selectivity towards this analyte in comparison to other phenolic compounds. A fourth reagent system, acidic soluble manganese(IV) and formaldehyde, was also examined. Each set of reagents was sensitive towards synephrine (limits of detection were 3 x 10(-9), 5 x 10(-8), 1 x 10(-8) and 1 x 10(-8) mol/L, respectively) but also responded with numerous other phenolic compounds, including some that are present in citrus fruit extracts, dietary supplements and/or biological fluids. It is therefore recommended that the determination of synephrine in these matrices should incorporate physical separation of sample components (e.g. chromatography or electrophoresis). In more general terms, this study illustrates that accurate percentage recoveries for an analyte in spiked samples (without validation against another analytical method) are insufficient to confirm the analytical utility of new flow-injection analysis (FIA) procedures.
Asunto(s)
Mediciones Luminiscentes/métodos , Fenoles/química , Sinefrina/análisis , Cromatografía , Electroforesis , Análisis de Inyección de Flujo , Indicadores y Reactivos , Mediciones Luminiscentes/normas , Fenoles/aislamiento & purificación , Proyectos de Investigación , Sinefrina/aislamiento & purificaciónRESUMEN
The scale-up of laboratory procedures to industrial production is the main challenge standing between ideation and the successful introduction of novel materials into commercial products. Retaining quality while ensuring high per-batch production yields is the main challenge. Batch processing and other dynamic strategies that preserve product quality can be applied, but they typically involve a variety of experimental parameters and functions that are difficult to optimize because of interdependencies that are often antagonistic. Adaptive Bayesian optimization is demonstrated here as a valuable support tool in increasing both the per-batch yield and quality of short polymer fibers, produced by wet spinning and shear dispersion methods. Through this approach, it is shown that short fiber dispersions with high yield and a specified, targeted fiber length distribution can be obtained with minimal cost of optimization, starting from sub-optimal processing conditions and minimal prior knowledge. The Bayesian function optimization demonstrated here for batch processing could be applied to other dynamic scale-up methods as well as to cases presenting higher dimensional challenges such as shape and structure optimization. This work shows the great potential of synergies between industrial processing, material engineering, and machine learning perspectives.
RESUMEN
The discovery of processes for the synthesis of new materials involves many decisions about process design, operation, and material properties. Experimentation is crucial but as complexity increases, exploration of variables can become impractical using traditional combinatorial approaches. We describe an iterative method which uses machine learning to optimise process development, incorporating multiple qualitative and quantitative objectives. We demonstrate the method with a novel fluid processing platform for synthesis of short polymer fibers, and show how the synthesis process can be efficiently directed to achieve material and process objectives.
RESUMEN
Examination of the chemiluminescence reactions of dihydroxybenzenes, aminophenols and phenylenediamines with acidic potassium permanganate has provided a new understanding of the relationships between analyte structure, reaction conditions, kinetics of the light-producing pathway and emission intensity, with broad implications for this widely utilised chemiluminescence detection system. Using a permanganate reagent prepared in a polyphosphate solution and adjusted to pH 2.5, large differences in the rate of reaction with different positional isomers were observed, with the meta-substituted forms reacting far slower and therefore exhibiting much lower chemiluminescence intensities in flow analysis systems. The preliminary partial reduction of permanganate to form significant concentrations of Mn(III) increased the rate of reaction with all analytes tested, resulting in comparable or (in the case of aminophenol and phenylenediamine) even greater emission intensities for the meta-isomers, demonstrating the opportunity to tune the selectivity of the reagent towards certain classes of compound or even specific positional isomers of the same compound. Using more acidic permanganate reagents, in which polyphosphates are not required, the discrepancy between the chemiluminescence intensities was still observed, but was less prominent due to the generally faster rates of reaction. The enhancement of these chemiluminescence reactions by on-line addition of formic acid or formaldehyde can in part also be attributed to the generation of significant pools of the key Mn(III) precursor to the emitting species.
Asunto(s)
Derivados del Benceno/química , Derivados del Benceno/farmacocinética , Luminiscencia , Compuestos de Manganeso/química , Compuestos de Manganeso/farmacocinética , Óxidos/química , Óxidos/farmacocinética , Análisis de Inyección de Flujo/métodos , Radical Hidroxilo/química , Radical Hidroxilo/farmacocinética , Isomerismo , CinéticaRESUMEN
Adrenergic amines found in extracts of Citrus aurantium (bitter orange) evoke analytically useful chemiluminescence with acidic potassium permanganate in the presence of polyphosphates. From corrected chemiluminescence spectra, the wavelength of maximum intensity for these reactions was 680+/-5 nm and, using flow injection analysis methodology, limits of detection for synephrine, octopamine, tyramine and hordenine were found to be between 1x10(-9) and 1x10(-8) M. We have applied this method of detection to the rapid determination of synephrine in dietary supplements using monolithic column chromatography.