RESUMEN
Corneal transplantation is the only option to cure corneal opacities. However, there is an imbalance between supply and demand of corneal tissues in the world. To solve the problem of corneal shortage, corneal xenotransplantation studies have been implemented in the past years using porcine corneas. The corneal xenografts could come from (a) wild-type pigs, (b) genetically engineered pigs, (c) decellularized porcine corneas, and (d) decellularized porcine corneas that are recellularized with human corneal cells, eventually with patients' own cells, as in all type of xenografts. All approaches except, the former would reduce or mitigate recipient immune responses. Although several techniques in decellularization have been reported, there is still no standardized protocol for the complete decellularization of corneal tissue. Herein, we reviewed different decellularization methods for porcine corneas based on the mechanism of action, decellularization efficacy, biocompatibility, and the undesirable effects on corneal ultrastructure. We compared 9 decellularization methods including: (a) sodium dodecyl sulfate, (b) triton x-100, (c) hypertonic saline, (d) human serum with electrophoresis, (e) high hydrostatic pressure, (f) freeze-thaw, (h) nitrogen gas, (h) phospholipase A2 , and (i) glycerol with chemical crosslinking methods. It appears that combined methods could be more useful to perform efficient corneal decellularization.
Asunto(s)
Córnea/inmunología , Trasplante de Córnea , Xenoinjertos/inmunología , Trasplante Heterólogo , Animales , Córnea/citología , Trasplante de Córnea/métodos , Matriz Extracelular/ultraestructura , Humanos , Porcinos , Andamios del Tejido , Trasplante Heterólogo/métodosRESUMEN
PURPOSE OF REVIEW: To review the impact of a new technology, 3D-bioprinting, in xenotransplantation research. RECENT FINDINGS: Genetically engineered pigs, beginning with human (h) CD55-transgenic and Gal-knockout pigs, have improved the outcomes of xenotransplantation research. Today, there are more than 30 different genetically engineered pigs either expressing human gene(s) or lacking pig gene(s). CRIPSR/cas9 technology has facilitated the production of multigene pigs (up to nine genes in a single pig), which lack multiple pig xenoantigens, and express human transgenes, such as hCD46, hCD55, hThrombomodulin, hCD39, etc. Although recent studies in nonhuman primates (NHPs) have demonstrated prolonged survival after life-supporting pig kidney, heart, and islet xenotransplantation, researchers have difficulty determining the best genetic combination to test in NHPs because of a potential greater than 100â000 genetic combinations. 3D-bioprinting of genetically engineered pig cells: is superior to 2D in-vitro testing, enables organ-specific testing, helps to understand differences in immunogenicity between organs, and is faster and cheaper than testing in NHPs. Moreover, 3D-bioprinted cells can be continuously perfused in a bioreactor, controlling for all variables, except the studied variable. SUMMARY: 3D-bioprinting can help in the study of the impact of specific genes (human or pig) in xenotransplantation in a rapid, inexpensive, and reliable way.
Asunto(s)
Bioimpresión/métodos , Impresión Tridimensional , Trasplante Heterólogo/métodos , Animales , Animales Modificados Genéticamente , Sistemas CRISPR-Cas , Ingeniería Genética , Humanos , PorcinosRESUMEN
Although liver transplantation is the gold-standard therapy for end-stage liver disease, the shortage of suitable organs results in only 25% of waitlisted patients undergoing transplants. Three-dimensional (3D) bioprinting is an emerging technology and a potential solution for personalized medicine applications. This review highlights existing 3D bioprinting technologies of liver tissues, current anatomical and physiological limitations to 3D bioprinting of a whole liver, and recent progress bringing this innovation closer to clinical use. We reviewed updated literature across multiple facets in 3D bioprinting, comparing laser, inkjet, and extrusion-based printing modalities, scaffolded versus scaffold-free systems, development of an oxygenated bioreactor, and challenges in establishing long-term viability of hepatic parenchyma and incorporating structurally and functionally robust vasculature and biliary systems. Advancements in liver organoid models have also increased their complexity and utility for liver disease modeling, pharmacologic testing, and regenerative medicine. Recent developments in 3D bioprinting techniques have improved the speed, anatomical, and physiological accuracy, and viability of 3D-bioprinted liver tissues. Optimization focusing on 3D bioprinting of the vascular system and bile duct has improved both the structural and functional accuracy of these models, which will be critical in the successful expansion of 3D-bioprinted liver tissues toward transplantable organs. With further dedicated research, patients with end-stage liver disease may soon be recipients of customized 3D-bioprinted livers, reducing or eliminating the need for immunosuppressive regimens.
Asunto(s)
Bioimpresión , Enfermedad Hepática en Estado Terminal , Humanos , Ingeniería de Tejidos/métodos , Bioimpresión/métodos , Impresión Tridimensional , Andamios del TejidoRESUMEN
Rotator cuff repair surgeries fail frequently, with 20 to 94% of the 600,000 repairs performed annually in the United States resulting in retearing of the rotator cuff. The most common cause of failure is sutures tearing through tendons at grasping points. To address this issue, we drew inspiration from the specialized teeth of snakes of the Pythonoidea superfamily, which grasp soft tissues without tearing. To apply this nondamaging gripping approach to the surgical repair of tendon, we developed and optimized a python tooth-inspired device as an adjunct to current rotator cuff suture repair and found that it nearly doubled repair strength. Integrated simulations, 3D printing, and ex vivo experiments revealed a relationship between tooth shape and grasping mechanics, enabling optimization of the clinically relevant device that substantially enhances rotator cuff repair by distributing stresses over the attachment footprint. This approach suggests an alternative to traditional suturing paradigms and may reduce the risk of tendon retearing after rotator cuff repair.
Asunto(s)
Boidae , Manguito de los Rotadores , Animales , Manguito de los Rotadores/cirugía , Boidae/fisiología , Lesiones del Manguito de los Rotadores/cirugía , Diente , Técnicas de Sutura/instrumentación , Fenómenos Biomecánicos , Humanos , Impresión TridimensionalRESUMEN
BACKGROUND: The aim of this study is to compare the three previously applied, conventional porcine corneal decellularization methods and to demonstrate the importance of preserving the corneal limbus through decellularization. METHODS: Fresh, wild-type (with or without) limbus porcine corneas were decellularized using three different methods, including (i) sodium dodecyl sulfate (SDS), (ii) hypertonic saline (HS), and (iii) N2 gas (NG). Post-treatment evaluation was carried out using histological, residual nuclear material, and ultrastructural analyses. Glycerol was used to help reduce the adverse effects of decellularization. The corneas were preserved for two weeks in cornea storage medium. RESULTS: All three decellularization methods reduced the number of keratocytes at different rates in the stromal tissue. However, all methods, except SDS, resulted in the retention of large numbers of cells and cell fragments. The SDS method (0.1% SDS, 48h) resulted in almost 100% decellularization in corneas without limbus. Low decellularization capacity of the NG method (<50%) could make it unfavorable. Although HS method had a more balanced damage-decellularization ratio, its decellularization capacity was lower than SDS method. Preservation of the corneoscleral limbus could partially prevent structural damage and edema, but it would reduce the decellularization capacity. CONCLUSION: Our results suggest that SDS is a very powerful decellularization method, but it damages the cornea irreversibly. Preserving the corneoscleral limbus reduces the efficiency of decellularization, but also reduces the damage.
Asunto(s)
Córnea/fisiología , Nitrógeno/química , Solución Salina Hipertónica/química , Dodecil Sulfato de Sodio/química , Ingeniería de Tejidos/métodos , Animales , Córnea/ultraestructura , Matriz Extracelular/metabolismo , Gases/química , Limbo de la Córnea/fisiología , Limbo de la Córnea/ultraestructura , Microscopía , PorcinosRESUMEN
Xenotransplantation (cross-species transplantation) using genetically-engineered pig organs offers a potential solution to address persistent organ shortage. Current evaluation of porcine genetic modifications is to monitor the nonhuman primate immune response and survival after pig organ xenotransplantation. This measure is an essential step before clinical xenotransplantation trials, but it is time-consuming, costly, and inefficient with many variables. We developed an efficient approach to quickly examine human-to-pig xeno-immune responses in vitro. A porcine endothelial cell was characterized and immortalized for genetic modification. Five genes including GGTA1, CMAH, ß4galNT2, SLA-I α chain, and ß2-microglobulin that are responsible for the production of major xenoantigens (αGal, Neu5Gc, Sda, and SLA-I) were sequentially disrupted in immortalized porcine endothelial cells using CRISPR/Cas9 technology. The elimination of αGal, Neu5Gc, Sda, and SLA-I dramatically reduced the antigenicity of the porcine cells, though the cells still retained their ability to provoke human natural killer cell activation. In summary, evaluation of human immune responses to genetically modified porcine cells in vitro provides an efficient method to identify ideal combinations of genetic modifications for improving pig-to-human compatibility, which should accelerate the application of xenotransplantation to humans.
Asunto(s)
Animales Modificados Genéticamente/inmunología , Antígenos Heterófilos/inmunología , Células Endoteliales/inmunología , Porcinos/inmunología , Trasplante Heterólogo/métodos , Animales , Anticuerpos Heterófilos/inmunología , Reacciones Antígeno-Anticuerpo , Antígenos Heterófilos/genética , Sistemas CRISPR-Cas , Degranulación de la Célula , Línea Celular Transformada , Citocinas/farmacología , Células Endoteliales/efectos de los fármacos , Galactosiltransferasas/genética , Galactosiltransferasas/inmunología , Técnicas de Inactivación de Genes , Rechazo de Injerto/inmunología , Rechazo de Injerto/prevención & control , Antígenos de Histocompatibilidad Clase I/genética , Antígenos de Histocompatibilidad Clase I/inmunología , Humanos , Células Asesinas Naturales/inmunología , Hígado/citología , Activación de Linfocitos , Oxigenasas de Función Mixta/genética , Oxigenasas de Función Mixta/inmunología , N-Acetilgalactosaminiltransferasas/genética , N-Acetilgalactosaminiltransferasas/inmunología , Microglobulina beta-2/genética , Microglobulina beta-2/inmunologíaRESUMEN
Endometriosis occurs when endometrial-like tissue grows outside the uterine cavity, leading to pelvic pain, infertility, and increased risk of ovarian cancer. The present study describes the optimization and characterization of cellular spheroids as building blocks for Kenzan scaffold-free method biofabrication and proof-of-concept models of endometriosis and the endometriotic microenvironment. The spheroid building blocks must be of a specific diameter (~500 µm), compact, round, and smooth to withstand Kenzan biofabrication. Under optimized spheroid conditions for biofabrication, the endometriotic epithelial-like cell line, 12Z, expressed high levels of estrogen-related genes and secreted high amounts of endometriotic inflammatory factors that were independent of TNFα stimulation. Heterotypic spheroids, composed of 12Z and T-HESC, an immortalized endometrial stromal cell line, self-assembled into a biologically relevant pattern, consisting of epithelial cells on the outside of the spheroids and stromal cells in the core. 12Z spheroids were biofabricated into large three-dimensional constructs alone, with HEYA8 spheroids, or as heterotypic spheroids with T-HESC. These three-dimensional biofabricated constructs containing multiple monotypic or heterotypic spheroids represent the first scaffold-free biofabricated in vitro models of endometriosis and the endometriotic microenvironment. These efficient and innovative models will allow us to study the complex interactions of multiple cell types within a biologically relevant microenvironment.
RESUMEN
The Kenzan bioprinting method provides a high-resolution biofabrication process by facilitating the fusion of submillimeter cell aggregates (spheroids) into larger tissue constructs on a needle array that is removed upon spheroid fusion. Although the method is relatively straightforward in principle, Kenzan method bioprinting relies on a complex 3D bioprinter (Regenova Bio 3D Printer, Cyfuse, K.K., Japan) implementing an advanced vision system to verify the microscopic spheroids' geometry and high-precision mechatronics to aseptically manipulate the spheroids into position. Due to the complexity of the operation, the need for aseptic conditions, and the size of the spheroids, proficiency with the Regenova Bio 3D Printer and the Kenzan method requires development of best practices and troubleshooting techniques to ensure a robust print and minimize the use of resources. In addition, managing the construct post-bioprinting both in culture and for surgical implantation requires careful consideration and workflow design. Here, we describe methods for generating a competent tissue construct and optimizing the bioprinting process. Optimization resulted in a 4-fold reduction in print times, a 20-fold reduction in the use of bioprinting nozzles, and more robust constructs. The results and procedures described herein will have potential applications for tissue engineering, research, and clinical uses in the future.
RESUMEN
Limitations in scaffold material properties, such as sub-optimal degradation time, highlight the need for alternative approaches to engineer de novo tissues. One emerging solution for fabricating tissue constructs is scaffold-free tissue engineering. To facilitate this approach, three-dimensional (3D) bioprinting technology (Regenova Bio 3D Printer) has been developed to construct complex geometric shapes from discrete cellular spheroids without exogenous scaffolds. Optimizing spheroid fabrication and characterizing cellular behavior in the spheroid environment are important first steps prior to printing larger constructs. Here, we characterized spheroids of immortalized mouse bone marrow stromal cells (BMSCs) that were differentiated to the osteogenic lineage. Immortalized BMSCs were seeded in low attachment 96-well plates in various numbers to generate self-aggregated spheroids either under the force of gravity or centrifugation. Cells were cultured in control or osteogenic media for up to 28 days. Spheroid diameter, roundness and smoothness were measured. Cell viability, DNA content and alkaline phosphatase activity were assessed at multiple time points. Additionally, expression of osteogenic markers was determined using real time qPCR. Spheroids formed under gravity with 20 K, 30 K and 40 K cells had average diameters of 498.5 ± 8.3 µm, 580.0 ± 32.9 µm and 639.2 ± 54.0 µm, respectively, while those formed under 300G centrifugation with the same numbers of cells had average diameters of 362.3 ± 3.5 µm, 433.1 ± 6.4 µm and 491.2 ± 8.0 µm. Spheroids formed via centrifugation were superior to those formed by gravity, as evidenced by better roundness and smoothness and double the retention of DNA (cellular) content. Cells in spheroids exhibited a robust osteogenic response to the differentiation medium, including higher mRNA expression of alkaline phosphatase, collagen type I, and osteocalcin than those cultured in control medium, as well as greater alkaline phosphatase activity. The optimal spheroid fabrication technique from this study was to aggregate 40K cells under 150-300G centrifugation. In future investigations, these spheroids will be 3D printed into larger tissue constructs.
RESUMEN
We are introducing the FABRICA, a bioprinter-agnostic 3D-printed bioreactor platform designed for 3D-bioprinted tissue construct culture, perfusion, observation, and analysis. The computer-designed FABRICA was 3D-printed with biocompatible material and used for two studies: (1) Flow Profile Study: perfused 5 different media through a synthetic 3D-bioprinted construct and ultrasonically analyzed the flow profile at increasing volumetric flow rates (VFR); (2) Construct Perfusion Study: perfused a 3D-bioprinted tissue construct for a week and compared histologically with a non-perfused control. For the flow profile study, construct VFR increased with increasing pump VFR. Water and other media increased VFR significantly while human and pig blood showed shallow increases. For the construct perfusion study, we confirmed more viable cells in perfused 3D-bioprinted tissue compared to control. The FABRICA can be used to visualize constructs during 3D-bioprinting, incubation, and to control and ultrasonically analyze perfusion, aseptically in real-time, making the FABRICA tunable for different tissues.
Asunto(s)
Reactores Biológicos , Diseño de Equipo/métodos , Animales , Bioimpresión/instrumentación , Diseño Asistido por Computadora , Humanos , Perfusión/instrumentación , Impresión Tridimensional/instrumentación , Técnicas de Cultivo de Tejidos/instrumentaciónRESUMEN
Functionally graded, mineralized collagen tissues exist at soft-to-hard material attachments throughout the body. However, the details of how collagen and hydroxyapatite mineral (HA) interact are not fully understood, hampering efforts to develop tissue-engineered constructs that can assist with repair of injuries at the attachments of soft tissues to bone. In this study, spatial control of mineralization was achieved in collagen matrices using simulated body fluids (SBFs). Based upon previous observations of poor bonding between reconstituted collagen and HA deposited using SBF, we hypothesized that mineralizing collagen in the presence of fetuin (which inhibits surface mineralization) would lead to more mineral deposition within the scaffold and therefore a greater increase in stiffness and toughness compared with collagen mineralized without fetuin. We tested this hypothesis through integrated synthesis, mechanical testing and modelling of graded, mineralized reconstituted collagen constructs. Results supported the hypothesis, and further suggested that mineralization on the interior of reconstituted collagen constructs, as promoted by fetuin, led to superior bonding between HA and collagen. The results provide us guidance for the development of mineralized collagen scaffolds, with implications for bone and tendon-to-bone tissue engineering.
RESUMEN
There are more than 30,000 orthopedic implant revision surgeries necessary each year in part due to poor implant fixation with juxtaposed bone. A further emphasis on the current problems associated with insufficient bone implant performance is the fact that many patients are receiving hip implants earlier in life, remaining active older, and that the human lifespan is continuously increasing. Collectively, it is clear that there is a strong clinical need to improve implant performance through proper, prolonged fixation. For these reasons, the objective of the present in vitro study was to improve the performance of titanium (Ti), one of the most popular orthopedic implant materials. Accordingly, the proliferative response of osteoblasts (bone-forming cells) on novel nanostructured Ti/PLGA (poly-lactic-co-glycolic acid) composites was examined. This study showed that nano-topography can be easily applied to Ti (through anodization) and porous PLGA (through NaOH chemical etching) to enhance osteoblast cell proliferation which may lead to better orthopedic implant performance. This straight forward application of nano-topography on current bone implant materials represents a new direction in the design of enhanced biomaterials for the orthopedic industry.