RESUMEN
We present a new method to synthesize bulk indium nitride by means of a simple solid-state chemical reaction carried out under hydrostatic high-pressure/high-temperature conditions in a multi-anvil apparatus, not involving gases or solvents during the process. The reaction occurs between the binary oxide In2O3 and the highly reactive Li3N as the nitrogen source, in the powder form. The formation of the hexagonal phase of InN, occurring at 350 °C and P ≥ 3 GPa, was successfully confirmed by powder X-ray diffraction, with the presence of Li2O as a unique byproduct. A simple washing process in weak acidic solution followed by centrifugation allowed us to obtain pure InN polycrystalline powders as a precipitate. With an analogous procedure, it was possible to obtain pure bulk GaN, from Ga2O3 and Li3N at T ≥ 600 °C and P ≥ 2.5 GPa. These results point out, particularly for InN, a clean, and innovative way to produce significant quantities of one of the most promising nitrides in the field of electronics and energy technologies.
RESUMEN
Mycotoxins are secondary metabolites produced by pathogenic fungi. They are found in a variety of different products, such as spices, cocoa, and cereals, and they can contaminate fields before and/or after harvest and during storage. Mycotoxins negatively impact human and animal health, causing a variety of adverse effects, ranging from acute poisoning to long-term effects. Given a large number of mycotoxins (currently more than 300 are known), it is impossible to use in vitro/in vivo methods to detect the potentially harmful effects to human health of all of these. To overcome this problem, this work aims to present a new robust computational approach, based on a combination of in silico and statistical methods, in order to screen a large number of molecules against the nuclear receptor family in a cost and time-effective manner and to discover the potential endocrine disruptor activity of mycotoxins. The results show that a high number of mycotoxins is predicted as a potential binder of nuclear receptors. In particular, ochratoxin A, zearalenone, α- and ß-zearalenol, aflatoxin B1, and alternariol have been shown to be putative endocrine disruptors chemicals for nuclear receptors.
Asunto(s)
Disruptores Endocrinos/toxicidad , Micotoxinas/toxicidad , Animales , Simulación por Computador , Análisis Costo-Beneficio , Humanos , Técnicas In Vitro , Ligandos , Modelos Estadísticos , Simulación del Acoplamiento Molecular , Receptores Citoplasmáticos y Nucleares/metabolismo , Programas InformáticosRESUMEN
The umami taste receptor is a heterodimer composed of two members of the T1R taste receptor family: T1R1 (taste receptor type 1 member 1) and T1R3 (taste receptor type 1 member 3). Taste receptor T1R1-T1R3 can be activated, or modulated, by binding to several natural ligands, such as L-glutamate, inosine-5'-monophosphate (IMP), and guanosine-5'-monophosphate (GMP). Because no structure of the umami taste receptor has been solved until now, in silico techniques, such as homology modelling, molecular docking, and molecular dynamics (MD) simulations, are used to generate a 3D structure model of this receptor and to understand its molecular mechanisms. The purpose of this chapter is to highlight how computational methods can provide a better deciphering of the mechanisms of action of umami ligands in activating the umami taste receptors leading to advancements in the taste research field.
Asunto(s)
Papilas Gustativas , Gusto , Ácido Glutámico , Humanos , Inosina Monofosfato , Ligandos , Simulación del Acoplamiento Molecular , Receptores Acoplados a Proteínas G/química , Papilas Gustativas/metabolismoRESUMEN
Copper-doped antimony selenide (Cu-doped Sb2Se3) thin films were deposited as absorber layers in photovoltaic solar cells using the low-temperature pulsed electron deposition (LT-PED) technique, starting from Sb2Se3 targets where part of the Sb was replaced with Cu. From a crystalline point of view, the best results were achieved for thin films with about Sb1.75Cu0.25Se3 composition. In order to compare the results with those previously obtained on undoped thin films, Cu-doped Sb2Se3 films were deposited both on Mo- and Fluorine-doped Tin Oxide (FTO) substrates, which have different influences on the film crystallization and grain orientation. From the current-voltage analysis it was determined that the introduction of Cu in the Sb2Se3 absorber enhanced the open circuit voltage (VOC) up to remarkable values higher than 500 mV, while the free carrier density became two orders of magnitude higher than in pure Sb2Se3-based solar cells.
RESUMEN
BACKGROUND: Poisoning from pesticides can be extremely hazardous for non-invasive species, such as bees, and humans causing nearly 300,000 deaths worldwide every year. Several pesticides are recognized as endocrine disruptors compounds that alter the production of the normal hormones mainly by acting through their interaction with nuclear receptors (NRs). Among the insecticides, one of the most used is pyriproxyfen. As analogous to the juvenile hormone, the pyriproxyfen acts in the bee's larval growth and creates malformations at the adult organism level. METHODS: This work aims to investigate the possible negative effects of pyriproxyfen and its metabolite, the 4'-OH-pyriproxyfen, on human and bee health. We particularly investigated the mechanism of binding of pyriproxyfen and its metabolite with ultraspiracle protein/ecdysone receptor (USP-EcR) dimer of A. mellifera and the relative heterodimer farnesoid X receptor/retinoid X receptor alpha (FXR-RXRα) of H. sapiens using molecular dynamic simulations. RESULTS: The results revealed that pyriproxyfen and its metabolite, the 4'-OH- pyriproxyfen, stabilize each dimer and resulted in stronger binders than the natural ligands. CONCLUSION: We demonstrated the endocrine interference of two pesticides and explained their possible mechanism of action. Furthermore, in vitro studies should be carried out to evaluate the biological effects of pyriproxyfen and its metabolite.
Asunto(s)
Abejas/efectos de los fármacos , Abejas/metabolismo , Piridinas/farmacología , Receptores Citoplasmáticos y Nucleares/metabolismo , Secuencia de Aminoácidos , Animales , Simulación por Computador , Humanos , Insecticidas/farmacología , Hormonas Juveniles/metabolismo , Larva/efectos de los fármacos , Larva/metabolismo , Receptores de Esteroides/metabolismoRESUMEN
We report on the high-pressure solid-state synthesis and the detailed structural characterization of the metastable, CuAu-type CuInS2 (CA-CIS) phase. Although often present in CIS thin films as unwanted phase, it has been never synthesized in pure form, and its effect on the performance of CIS-based solar cells has been long debated. In this work, pure CA-CIS phase is synthesized in bulk polycrystalline form through a high-pressure-high-temperature solid-state reaction. Single-crystal X-rays diffraction reveals the formation of tetragonal CA-CIS (a = 3.9324(5), c = 5.4980(7) Å) either in cation-ordered and disordered phase, pointing out the role of the pressure/temperature increase on the Cu/In ordering. The resistivity measurements performed on CA-CIS show low resistivity and a flat trend vs temperature and, in the case of the ordered phase, highlight a bad-metallic behavior, probably due to a high level of doping. These findings clearly rule out the possibility of a beneficial effect of this phase on the CIS-based thin film solar cells.
RESUMEN
Interfacial regions play a key role in determining the overall power conversion efficiency of thin film solar cells. However, the nanoscale investigation of thin film interfaces using conventional analytical tools is challenging due to a lack of required sensitivity and spatial resolution. Here, we surmount these obstacles using tip-enhanced Raman spectroscopy (TERS) and apply it to investigate the absorber (Sb2Se3) and buffer (CdS) layers interface in a Sb2Se3-based thin film solar cell. Hyperspectral TERS imaging with 10 nm spatial resolution reveals that the investigated interface between the absorber and buffer layers is far from uniform, as TERS analysis detects an intermixing of chemical compounds instead of a sharp demarcation between the CdS and Sb2Se3 layers. Intriguingly, this interface, comprising both Sb2Se3 and CdS compounds, exhibits an unexpectedly large thickness of 295 ± 70 nm attributable to the roughness of the Sb2Se3 layer. Furthermore, TERS measurements provide compelling evidence of CdS penetration into the Sb2Se3 layer, likely resulting from unwanted reactions on the absorber surface during chemical bath deposition. Notably, the coexistence of ZnO, which serves as the uppermost conducting layer, and CdS within the Sb2Se3-rich region has been experimentally confirmed for the first time. This study underscores TERS as a promising nanoscale technique to investigate thin film inorganic solar cell interfaces, offering novel insights into intricate interface structures and compound intermixing.
RESUMEN
Raman spectroscopy, a versatile and nondestructive technique, was employed to develop a methodology for gallium oxide (Ga2O3) phase detection and identification. This methodology combines experimental results with a comprehensive literature survey. The established Raman approach offers a powerful tool for nondestructively assessing phase purity and detecting secondary phases in Ga2O3 thin films. X-ray diffraction was used for comparison, highlighting the complementary information that these techniques may provide for Ga2O3 characterization. Few case studies are included to demonstrate the usefulness of the proposed spectroscopic approach, namely the impact of deposition conditions such as metal-organic vapor-phase epitaxy and pulsed electron deposition (PED), and extrinsic elements provided during growth (Sn in the case of PED) on Ga2O3 polymorphism. In conclusion, it is shown that Raman spectroscopy offers a quick, reliable, and nondestructive high-resolution approach for Ga2O3 thin film characterization, especially concerning phase detection and crystalline quality.
RESUMEN
According to Eurostat, the EU production of chemicals hazardous to health reached 211 million tonnes in 2019. Thus, the possibility that some of these chemical compounds interact negatively with the human endocrine system has received, especially in the last decade, considerable attention from the scientific community. It is obvious that given the large number of chemical compounds it is impossible to use in vitro/in vivo tests for identifying all the possible toxic interactions of these chemicals and their metabolites. In addition, the poor availability of highly curated databases from which to retrieve and download the chemical, structure, and regulative information about all food contact chemicals has delayed the application of in silico methods. To overcome these problems, in this study we use robust computational approaches, based on a combination of highly curated databases and molecular docking, in order to screen all food contact chemicals against the nuclear receptor family in a cost and time-effective manner.
Asunto(s)
Disruptores Endocrinos , Macrodatos , Disruptores Endocrinos/toxicidad , Alimentos , Humanos , Simulación del Acoplamiento Molecular , Receptores Citoplasmáticos y NuclearesRESUMEN
Multiferroics, showing the coexistence of two or more ferroic orderings at room temperature, could harness a revolution in multifunctional devices. However, most of the multiferroic compounds known to date are not magnetically and electrically ordered at ambient conditions, so the discovery of new materials is pivotal to allow the development of the field. In this work, we show that BaFe2O4 is a previously unrecognized room temperature multiferroic. X-ray and neutron diffraction allowed to reveal the polar crystal structure of the compound as well as its antiferromagnetic behavior, confirmed by bulk magnetometry characterizations. Piezo force microscopy and electrical measurements show the polarization to be switchable by the application of an external field, while symmetry analysis and calculations based on density functional theory reveal the improper nature of the ferroelectric component. Considering the present findings, we propose BaFe2O4 as a Bi- and Pb-free model for the search of new advanced multiferroic materials.
RESUMEN
Risk-benefit assessment is the comparison of the risk of a situation to its related benefits, i.e. a comparison of scenarios estimating the overall health impact. The risk-benefit analysis paradigm mirrors the classical risk analysis one: risk-benefit assessment goes hand-in-hand with risk-benefit management and risk-benefit communication. The various health effects associated with food consumption, together with the increasing demand for advice on healthy and safe diets, have led to the development of different research disciplines in food safety and nutrition. In this sense, there is a clear need for a holistic approach, including and comparing all of the relevant health risks and benefits. The risk-benefit assessment of foods is a valuable approach to estimate the overall impact of food on health. It aims to assess together the negative and positive health effects associated with food intake by integrating chemical and microbiological risk assessment with risk and benefit assessment in food safety and nutrition. The 2019 Parma Summer School on risk-benefit in food safety and nutrition had the objective was to provide an opportunity to learn from experts in the field of risk-benefit approach in food safety and nutrition, including theory, case studies, and communication of risk-benefit assessments plus identify challenges for the future. It was evident that whereas tools and approaches have been developed, more and more case studies have been performed which can form an inherent validation of the risk-benefit approach. Executed risk-benefit assessment case studies apply the steps and characteristics developed: a problem formulation (with at least 2 scenarios), a tiered approach until a decision can be made, one common currency to describe both beneficial and adverse effects (DALYs in most instances). It was concluded that risk-benefit assessment in food safety and nutrition is gaining more and more momentum, while also many challenges remain for the future. Risk-benefit is on the verge of really enrolling into the risk assessment and risk analysis paradigm. The interaction between risk-benefit assessors and risk-benefit managers is pivotal in this, as is the interaction with risk-benefit communicators.