Characterization of OSL dosimeters used at the ELI-beamlines laser-driven accelerator facility.

The Extreme Light Infrastructure (ELI) Beamlines laser-driven accelerator facility is set to operate the most intense non-military laser system in the world, with ultra-high power up to 10 PW, concentrated plasma intensities of up to 1024W cm-2, and ultra-short laser pulses of the order of few femtoseconds. A robust and redundant radiation monitoring system is in place to minimise risks to personnel and general public. Beryllium oxide optically stimulated luminescence (BeO-OSL) detectors are used to monitor radiation levels in the experimental building and surrounding grounds. In fact, in recent years, BeO-OSL have become an increasingly more popular choice for personal and environmental dosimetry. At ELI Beamlines, an exhaustive and thorough characterization process of the BeO-OSLs is in place. Dosimeter responses are studied as a function of delivered air kerma and photon energies. Calibration curves are calculated. Results from the latest calibration campaign are presented.

RADON CONCENTRATION TIME SERIES MODELING AND APPLICATION DISCUSSION.

In the year 2010 a continual radon measurement was established at Mladec Caves in the Czech Republic using a continual radon monitor RADIM3A. In order to model radon time series in the years 2010-15, the Box-Jenkins Methodology, often used in econometrics, was applied. Because of the behavior of radon concentrations (RCs), a seasonal integrated, autoregressive moving averages model with exogenous variables (SARIMAX) has been chosen to model the measured time series. This model uses the time series seasonality, previously acquired values and delayed atmospheric parameters, to forecast RC. The developed model for RC time series is called regARIMA(5,1,3). Model residuals could be retrospectively compared with seismic evidence of local or global earthquakes, which occurred during the RCs measurement. This technique enables us to asses if continuously measured RC could serve an earthquake precursor.

N-Methylcarbamoyl-lysine adduct in globin: a new metabolic product and potential biomarker of N, N-dimethylformamide in humans.

Metabolism of the solvents N,N-dimethylformamide (DMF) and N-methylformamide (MF) results in the formation of N-methylcarbamoyl adducts at the N-terminal valine and lysine in blood protein globin, of which the lysine adduct has so far only been reported in rats given high doses of both solvents [Mráz, J., Simek, P., Chvalová, D., Nohová, H., Smigolová, P., 2004. Studies on the methyl isocyanate adducts in globin. Chem. Biol. Interact. 148, 1-10]. Here we examined whether the lysine adduct is produced, and accessible to analysis, in humans occupationally or experimentally exposed to DMF. Globin from exposed subjects (n=35) and unexposed controls (n=5) was analyzed by two methods. Edman degradation was used as a sensitive reference method to measure the valine adduct by converting it to 3-methyl-5-isopropylhydantoin (MVH). The MVH levels in globin of the exposed subjects were in the range of 1-441 nmol/g, in controls <1 nmol/g. The principal method of globin analysis consisted of enzymatic hydrolysis with pronase to release free N(epsilon)-(N-methylcarbamoyl)lysine (MLU) and N-methylcarbamoylvaline (MVU), which were determined by HPLC/MS/MS, with no clean-up or preconcentration steps needed. For MLU, the parent and product ions were m/z 204-->173, and the limit of detection was approximately 5 nmol/g globin. MLU was found in most globins from the exposed subjects but not in the controls. A close correlation between the MLU and MVH levels (nmol/g) was observed: MLU=7+0.48 MVH (R(2)=0.84, n=32). In conclusion, MLU can be easily measured in globin of workers exposed to DMF. The findings also indicate a long-term persistence of MLU in the human body, and consequently, its potential as a biomarker of chronic exposure to DMF.

Human urine certified reference material CZ 6010: creatinine and toluene metabolites (hippuric acid and o-cresol) and a benzene metabolite (phenol).

A reference material for the biological monitoring of occupational exposure to toluene, benzene and phenol was prepared. O-cresol and hippuric acid (metabolites of toluene) are used for the biological monitoring of occupational exposure to toluene. Phenol, a metabolite of benzene, is used for the biological monitoring of exposure to benzene, but phenol can of course also be used as an indicator of exposure to phenol as well. The reference material (RM) used for the determination of these metabolites was prepared by freeze-drying pooled urine samples obtained from healthy persons occupationally exposed to toluene and those taking part in an inhalation experiment. Tests for homogeneity and stability were performed by determining urine concentrations of o-cresol, hippuric acid, creatinine and phenol. To investigate the stability of the RM, the urinary concentrations of o-cresol and phenol were monitored for eighteen months using GC and HPLC, while those of hippuric acid and creatinine were followed for five and six years, respectively, using HPLC. Analysis of variance showed that the concentrations did not change. The certified concentration values (and their uncertainties) of the substances in this reference material (phenol concentration c=6.46+/-0.58 mg l(-1); o-cresol concentration c=1.17+/-0.15 mg l(-1); hippuric acid concentration c=1328+/-30 mg l(-1); creatinine concentration c=0.82+/-0.10 g l(-1)) were evaluated via the interactive statistical programme IPECA.

A rapid HPLC method for the determination of carboxylic acids in human urine using a monolithic column.

A rapid HPLC method for the determination of carboxylic acids in urine samples using a Chromolith Performance RP/18e 100/4.6 with Chromolith Guard Cartridge RP/18e 10/4.6 (Merck KgaA, Darmstadt, Germany) was developed. The method facilitates the simultaneous determination of aromatic hydrocarbon metabolites mandelic acid (MA) and phenylglyoxylic acid (PGA) from styrene and ethylbenzene, hippuric acid (HA) from toluene and 2-, 3-, 4-methylhippuric acids (MHA) from xylene. 3-hydroxybenzoic acid (3-HBA) was used as internal standard. A chromatographic run is completed within less than 5 min for styrene, ethylbenzene and toluene metabolites, and within 10 min for xylene metabolites. The detection limits are 9 mg L(-1) urine for MA, 1.25 mg L(-1) urine for PGA, 4.9 mg L(-1) urine for HA, 22 mg L(-1) urine for 2-MHA, and 18.5 mg L(-1) urine for 3-MHA. No significant differences of the MA, PGA and HA concentrations in human urine samples obtained by HPLC chromatography on LiChrosorb RP 18 and on Chromolith RP/18e columns were found. The results were evaluated by using ANOVA.

Human urine certified reference material CZ 6009: creatinine, styrene metabolites (mandelic acid and phenylglyoxylic acid).

The reference material was prepared by freeze-drying pooled urine samples obtained from healthy persons occupationally exposed to styrene. The concentrations of mandelic acid (MA), phenylglyoxylic acid (PGA), and hippuric acid (HA) in urine were determined by three modes of high-performance liquid chromatography (HPLC). For isochronous stability testing the urinary mandelic acid and phenylglyoxylic acid concentrations were followed over a 24-month period for a preliminary batch by use of HPLC. No changes of the concentration values were found. The creatinine concentration was stable for more than five years. Standard Reference Material NIST 914a Creatinine was used for traceability purposes for creatinine. Pure chemicals MA and PGA were used for traceability purposes. Control material ClinChek-Urine Control (Recipe) was analyzed simultaneously. The mean values of MA and PGA compare well with the means and fall within the control range of control samples. Results from homogeneity, stability, and traceability testing were evaluated using the statistical program ANOVA. The certified values and their uncertainties were evaluated from the results of interlaboratory comparisons, and homogeneity and stability tests. The values are unweighed arithmetical averages of accepted results and their uncertainties are combined uncertainties (coverage factor=1).

Pseudomonas aeruginosa. II. Experimental acellular vaccine of an endotoxin and anatoxin type.

The results are given of quality evaluation of endotoxin and exotoxin antigens isolated from P. aeruginosa strains. The isolates were tested by both in vitro and in vivo methods. The results of an active protection test on white mice formed the basis for the construction of an experimental Pseudomonas vaccine that protects the immunized animals against infection even by heterologous strains of P. aeruginosa.

Pseudomonas aeruginosa. I. Large-volume cultivation of production strains for vaccination purposes.

A submerged culture technology was used to produce large-volume suspensions of Pseudomonas aeruginosa production strain for the purpose of vaccination. This paper describes the composition of the culture media used and the methods of preparing endotoxin and exotoxin components of the desired immunogenic activity.