Urban Sanitation: New Terminology for Globally Relevant Solutions?

Progress toward Sustainable Development Goals for global access to safe sanitation is lagging significantly. In this Feature, we propose that misleading terminology leads to errors of categorization and hinders progress toward sanitation service provision in urban areas. Binary classifications such as "offsite/onsite" and "sewered/nonsewered" do not capture the need for "transport to treatment" or the complexity of urban sanitation and should be discarded. "Fecal sludge management" is used only in the development context of low- or middle-income countries, implying separate solutions for "poor" or "southern" contexts, which is unhelpful. Terminology alone does not solve problems, but rather than using outdated or "special" terminology, we argue that a robust terminology that is globally relevant across low-, middle-, and upper-income contexts is required to overcome increasingly unhelpful assumptions and stereotypes. The use of accurate, technically robust vocabulary and definitions can improve decisions about management and selection of treatment, promote a circular economy, provide a basis for evidence-based science and technology research, and lead to critical shifts and transformations to set policy goals around truly safely managed sanitation. In this Feature, the three current modes of sanitation are defined, examples of misconceptions based on existing terminology are presented, and a new terminology for collection and conveyance is proposed: (I) fully road transported, (II) source-separated mixed transport, (III) mixed transport, and (IV) fully pipe transported.

Towards globally relevant, small-footprint dewatering solutions: Optimal conditioner dose for highly variable blackwater from non-sewered sanitation.

Globally, the sanitation needs of three billion people are met by non-sewered sanitation. Small-footprint treatment technologies are needed that are appropriate for dense urban areas. Blackwater (BW) (or fecal sludge), contains more than 95% liquid, and dewatering it without conditioning requires large footprints. Chemically-enhanced dewatering with conditioners is a promising option to increase dewatering performance and reduce required footprints. However, before implementation of this solution there is a need for increased knowledge on selection and dosing of conditioners. This study evaluated bio-based and synthetic conditioners (chitosan, tannin-, and starch-based, synthetic with and without poly-acrylamide) with 14 types of BW from five countries. The supernatant after settling with jar-tests was analyzed to quantify optimal dose and dewatering performance. The reduction of total chemical oxygen demand (COD) was >55%, achieved by removal of particulate constituents with mainly soluble COD remaining in the supernatant. A reduction in particulate COD could lead to increased efficiency of soluble COD in supernatant treatment. Bio-based conditioners are as effective as synthetic conditioners, and when performance was variable, it was due to differing properties of TSS, TS, EC and pH. Optimal conditioner dose for synthetic conditioners and chitosan could be predicted using concentrations of total solids (TS) (R2 > 0.7), whereas optimal dose for starch- and tannin-based conditioners could be predicted with electrical conductivity (EC) (R2 > 0.8), and colloid titration (R2 > 0.8). In addition, real-time optical TSS and EC sensors could accurately predict chitosan dose for fresh BW treated at source (R2 = 0.97, R2 = 0.95). This study validates that use of conditioners for dewatering with highly variable BW can be implemented with real-time measurements for optimal dose, in globally relevant implementations.

Modelling quantities and qualities (Q&Q) of faecal sludge in Hanoi, Vietnam and Kampala, Uganda for improved management solutions.

The importance of faecal sludge management is gaining recognition. However, methods are still lacking to reasonably estimate the quantities and qualities (Q&Q) that need to be managed, which makes the planning for and implementing of management solutions quite difficult. The objective of this study was to collect and analyse Q&Q of faecal sludge at a citywide scale, and to evaluate whether "SPA-DET" data (=> spatially analysable - demographic, environmental and technical) could then be used as predictors of Q&Q of faecal sludge. 60 field samples and questionnaires from Hanoi and 180 from Kampala were analysed. Software tools were used in an iterative process to predict total solids (TS) and emptying frequency in both Hanoi, Vietnam and Kampala, Uganda. City-specific data could be predicted with types of "SPA-DET" data as input variables, and model performance was improved by analysing septic tanks and pit latrines separately. Individual models were built for TS concentrations and emptying frequency. In addition, a model was built across both cities for emptying frequency of septic tanks based on number of users and containment volume, indicating predictive models can be relevant for multiple cities. Number of users, containment volume, truck volume and income level were identified as the most common variables for the correction function. Results confirm the high intrinsic variability of faecal sludge characteristics, and illustrate the importance of moving beyond simple reporting of city-wide average values for estimations of Q&Q. The collected data and developed scripts have been made available for replication in future studies.

Methods to reliably estimate faecal sludge quantities and qualities for the design of treatment technologies and management solutions.

Sanitation access in urban areas of low-income countries is provided through unstandardized onsite technologies containing accumulated faecal sludge. The demand for infrastructure to manage faecal sludge is increasing, however, no reliable method exists to estimate total accumulated quantities and qualities (Q&Q) This proposed approach averages out complexities to estimate conditions at a centralized to semi-centralized scale required for management and treatment technology solutions, as opposed to previous approaches evaluating what happens in individual containments. Empirical data, demographic data, and questionnaires were used in Kampala, Uganda to estimate total faecal sludge accumulation in the city, resulting in 270 L/cap∙year for pit latrines and 280 L/cap∙year for septic tanks. Septic tank sludge was more dilute than pit latrine sludge, however, public toilet was not a distinguishing factor. Non-household sources of sludge represent a significant fraction of the total and have different characteristics than household-level sludge. Income level, water connection, black water only, solid waste, number of users, containment volume, emptying frequency, and truck size were predictors of sludge quality. Empirical relationships such as a COD:TS of 1.09 ±â€¯0.56 could be used for more resource efficient sampling campaigns. Based on this approach, spatially available demographic, technical and environmental (SPA-DET) data and statistical relationships between parameters could be used to predict Q&Q of faecal sludge.

Capital and operating costs of full-scale fecal sludge management and wastewater treatment systems in Dakar, Senegal.

A financial comparison of a parallel sewer based (SB) system with activated sludge, and a fecal sludge management (FSM) system with onsite septic tanks, collection and transport (C&T) trucks, and drying beds was conducted. The annualized capital for the SB ($42.66 capita(-1) year(-1)) was ten times higher than the FSM ($4.05 capita(-1) year(-1)), the annual operating cost for the SB ($11.98 capita(-1) year(-1)) was 1.5 times higher than the FSM ($7.58 capita(-1) year(-1)), and the combined capital and operating for the SB ($54.64 capita(-1) year(-1)) was five times higher than FSM ($11.63 capita(-1) year(-1)). In Dakar, costs for SB are almost entirely borne by the sanitation utility, with only 6% of the annualized cost borne by users of the system. In addition to costing less overall, FSM operates with a different business model, with costs spread among households, private companies, and the utility. Hence, SB was 40 times more expensive to implement for the utility than FSM. However, the majority of FSM costs are borne at the household level and are inequitable. The results of the study illustrate that in low-income countries, vast improvements in sanitation can be affordable when employing FSM, whereas SB systems are prohibitively expensive.

Elucidating the role of extracellular polymeric substances (EPS) in dewaterability of fecal sludge from onsite sanitation systems, and changes during anaerobic storage.

As the importance of fecal sludge management (FSM) is increasingly being realized, the need for adequately designed and functioning fecal sludge (FS) treatment plants is also increasing. Research to fill this gap is only emerging and dewatering is a key challenge for developing sustainable treatment solutions. This study evaluated the effect of extracellular polymeric substances (EPS) on dewaterability of FS, and how EPS and dewaterability change during anaerobic storage (as a proxy for time in onsite containment). EPS was extracted from FS and activated sludge using Na2CO3 and sonication and added to sludge samples to determine the effect on dewaterability. The results confirmed that an increase in EPS had a direct impact of decreasing FS dewaterability (as capillary suction time). In this context, we evaluated FS degradation during anaerobic storage, the effect of anaerobic storage time on EPS, EPS fractions and particle size distribution, and the effect of variations in these factors on FS dewaterability. Variations in EPS, EPS fraction and particle size distribution during anaerobic storage were less than expected and average VS reduction of 20% was recorded over 7 weeks. Although anaerobic digestion was verified (biogas production), the results indicate that kinetics of degradation of FS is different from wastewater sludges. Comparatively, EPS fractions in FS were 70 - 75% lower and with higher fractions of humic-like substances than wastewater sludges. Although EPS significantly affects FS dewaterability, anaerobic storage time is not a predictor of dewaterability.

Predictive models using "cheap and easy" field measurements: Can they fill a gap in planning, monitoring, and implementing fecal sludge management solutions?

The characteristics of fecal sludge delivered to treatment plants are highly variable. Adapting treatment process operations accordingly is challenging due to a lack of analytical capacity for characterization and monitoring at many treatment plants. Cost-efficient and simple field measurements such as photographs and probe readings could be proxies for process control parameters that normally require laboratory analysis. To investigate this, we evaluated questionnaire data, expert assessments, and simple analytical measurements for fecal sludge collected from 421 onsite containments. This data served as inputs to models of varying complexity. Random forest and linear regression models were able to predict physical-chemical characteristics including total solids (TS) and ammonium (NH4+-N) concentrations, and solid-liquid separation performance including settling efficiency and filtration time (R2 from 0.51-0.66) based on image analysis of photographs (sludge color, supernatant color, and texture) and probe readings (conductivity (EC) and pH). Supernatant color was the best predictor of settling efficiency and filtration time, EC was the best predictor of NH4+-N, and texture was the best predictor of TS. Predictive models have the potential to be applied for real-time monitoring and process control if a database of measurements is developed and models are validated in other cities. Simple decision tree models based on the single classifier of containment type can also be used to make predictions about citywide planning, where a lower degree of accuracy is required.

Evaluation of conceptual model and predictors of faecal sludge dewatering performance in Senegal and Tanzania.

Unpredictable dewatering performance is a barrier to the effective management and treatment of faecal sludge. While mechanisms of dewatering in sludges from wastewater treatment are well understood, it is not clear how dewatering of faecal sludge fits into the framework of existing knowledge. We evaluate physical-chemical parameters, including EPS and cations, and demographic (source), environmental (microbial community), and technical factors (residence time) as possible predictors of dewatering performance in faecal sludge, and make comparisons to the existing conceptual model for wastewater sludge. Faecal sludge from public toilets took longer to dewater than sludge from other sources, and had turbid supernatant after settling. Slow dewatering and turbid supernatant corresponded to high EPS and monovalent cation concentrations, conductivity, and pH, but cake solids after dewatering was not correlated with EPS or other factors. Faecal sludges with higher EPS appeared less stabilised than those with lower EPS, potentially a result of inhibition of biological degradation due to high urine concentrations. However, distinct microbial community compositions were also observed in samples with higher and lower EPS concentrations. Higher EPS faecal sludge was comparable in dewatering behaviour and EPS content to anaerobically digested and primary wastewater sludges. However lower EPS faecal sludges had different dewatering behaviour than wastewater sludges and may be governed by different mechanisms.

Review of synthetic human faeces and faecal sludge for sanitation and wastewater research.

Investigations involving human faeces and faecal sludge are of great importance for urban sanitation, such as operation and maintenance of sewer systems, or implementation of faecal sludge management. However, working with real faecal matter is difficult as it not only involves working with a pathogenic, malodorous material but also individual faeces and faecal sludge samples are highly variable, making it difficult to execute repeatable experiments. Synthetic faeces and faecal sludge can provide consistently reproducible substrate and alleviate these challenges. A critical literature review of simulants developed for various wastewater and faecal sludge related research is provided. Most individual studies sought to develop a simulant representative of specific physical, chemical, or thermal properties depending on their research objectives. Based on the review, a suitable simulant can be chosen and used or further developed according to the research needs. As an example, the authors present such a modification for the development of a simulant that can be used for investigating the motion (movement, settling and sedimentation) of faeces and their physical and biological disintegration in sewers and in on-site sanitation systems.

Cross-country analysis of faecal sludge dewatering.

Dewatering of faecal sludge (FS) is indispensable for adequate FS management. However, comprehensive knowledge is lacking on FS dewatering performance. This study compared the dewatering performance of FS from different countries and onsite sanitation technologies, to assess influential characteristics on dewatering, and to compare dewatering performance of FS with wastewater sludge. We collected 73 FS samples from septic tanks, lined pit latrines, unlined pit latrines and johkasou tanks in Uganda, Vietnam and Japan, and 18 samples of wastewater sludge in Switzerland. Capillary suction time (CST) and total solids (TS) of centrifuged sludge (%TSfinal) were determined as metrics of dewatering rate and dewaterability, respectively, together with relevant sludge characteristics. Data were analysed by bootstrapping comparison of median results of each sample category and by bootstrapping multiple regression analysis to quantify the relative importance of sludge characteristics on dewatering performance. Results showed that the dewatering rate was significantly different between FS from different technologies, whereas dewaterability was significantly different within the same technology. FS had a significantly lower dewatering rate than wastewater sludge. In contrast, FS dewaterability was greater than wastewater sludge. However, this could be attributed to higher concentrations of sand in FS. Electrochemical properties such as NH4-N and surface charge had the strongest correlation to dewatering rate, and solid properties such as sand content and total volatile solids to dewaterability. The results identify potential characteristics that could explain and predict the high variability of FS dewatering performance that is observed in the field.

Locally produced natural conditioners for dewatering of faecal sludge.

In urban areas of low-income countries, treatment of faecal sludge (FS) is insufficient or non-existent. This results in large amounts of FS being dumped into the environment. Existing treatment technologies for FS, such as settling-thickening tanks and drying beds, are land intensive which is limiting in urban areas. Enhanced settling and dewatering by conditioning was evaluated in order to reduce the treatment footprint (or increase treatment capacity). Conventional wastewater conditioners, such as commercially available lime and polymers, are expensive, and commonly rely on complex supply chains for use in low-income countries. Therefore, the treatment performance of five conditioners which could be produced locally was evaluated: Moringa oleifera seeds and press cake, Jatropha curcas seeds, Jatropha Calotropis leaves and chitosan. M. oleifera seeds and press cake, and chitosan improved settling and dewatering and had a similar performance compared to lime and polymers. Optimal dosages were 400-500 kg M. oleifera/t TS, 300-800 kg lime/t TS and 25-50 kg polymer solution/t TS. In comparison, chitosan required 1.5-3.75 kg/t TS. These dosages are comparable to those recommended for wastewater (sludge). The results indicate that conditioning of FS can reduce total suspended solids (TSS) in the effluent of settling-thickening tanks by 22-81% and reduce dewatering time with drying beds by 59-97%. This means that the area of drying beds could be reduced by 59-97% with end-use as soil conditioner, or 9-26% as solid fuel. Least expensive options and availability will depend on the local context. In Dakar, Senegal, chitosan produced from shrimp waste appears to be most promising.

Pathogens and pharmaceuticals in source-separated urine in eThekwini, South Africa.

In eThekwini, South Africa, the production of agricultural fertilizers from human urine collected from urine-diverting dry toilets is being evaluated at a municipality scale as a way to help finance a decentralized, dry sanitation system. The present study aimed to assess a range of human and environmental health hazards in source-separated urine, which was presumed to be contaminated with feces, by evaluating the presence of human pathogens, pharmaceuticals, and an antibiotic resistance gene. Composite urine samples from households enrolled in a urine collection trial were obtained from urine storage tanks installed in three regions of eThekwini. Polymerase chain reaction (PCR) assays targeted 9 viral and 10 bacterial human pathogens transmitted by the fecal-oral route. The most frequently detected viral pathogens were JC polyomavirus, rotavirus, and human adenovirus in 100%, 34% and 31% of samples, respectively. Aeromonas spp. and Shigella spp. were frequently detected gram negative bacteria, in 94% and 61% of samples, respectively. The gram positive bacterium, Clostridium perfringens, which is known to survive for extended times in urine, was found in 72% of samples. A screening of 41 trace organic compounds in the urine facilitated selection of 12 priority pharmaceuticals for further evaluation. The antibiotics sulfamethoxazole and trimethoprim, which are frequently prescribed as prophylaxis for HIV-positive patients, were detected in 95% and 85% of samples, reaching maximum concentrations of 6800 µg/L and 1280 µg/L, respectively. The antiretroviral drug emtricitabine was also detected in 40% of urine samples. A sulfonamide antibiotic resistance gene (sul1) was detected in 100% of urine samples. By coupling analysis of pathogens and pharmaceuticals in geographically dispersed samples in eThekwini, this study reveals a range of human and environmental health hazards in urine intended for fertilizer production. Collection of urine offers the benefit of sequestering contaminants from environmental release and allows for targeted treatment of potential health hazards prior to agricultural application. The efficacy of pathogen and pharmaceutical inactivation, transformation or removal during urine nutrient recovery processes is thus briefly reviewed.