Extra-Oral Excision of a Buccal Fat Pad Lipoma.

Lipomas and its variants are common soft tissue tumors, and however occur infrequently in the oral and maxillofacial region. Their incidence in the oral cavity is low among all oral lesions. Oral lipoma is yellowish and soft to palpation, and histologically can be mistaken by other lipoma variants. The aim of this study is to report a case of a lipoma located at the buccal fat pad which was removed through an extra-oral access. A 43-year-old male is presenting an augmentation in the right buccal region, being a soft consistency mobile lesion with 1.5 cm of diameter, asymptomatic, and 2 years of growing. Computed tomography scan showed hypodensity compatible with adipose tissue. The lesion was removed through an extra-oral access. The lipoma described in this clinical report had an unusual location and once the lesion was very superficial an extra-oral access was the first treatment option despite the fact that was a benign tumor.

Sialolithiasis in the duct of submandibular gland: a case report in patient with epidermolysis bullosa.

AIM: To describe the options of treatment to remove a sialolith associated with the submandibular gland duct in a patient with epidermolysis bullosa (EB). BACKGROUND: Treatment of patients with EB is very complex and involves a multidisciplinary team. This condition is characterized by a spectrum of blistering and mechanical fragility of the skin. One main feature of this disease is the esophageal constriction and possible constriction to the submandibular duct. This alteration may induce the formation of calculi in this duct, which is called sialolith. Once the sialolith obliterates the trajectory of the duct this will lead to a sialolithiasis. The calculi have to be removed. CASE REPORT: Seventeen years old female patient with dystrophic EB developed a sialolith at the submandibular duct. She has a limited mouth opening and her tongue was collapsed with mouth floor. The first choice of treatment was the lithotripsy, once this procedure is less invasive and a surgical remove could worse the collapsed tongue. She was with acute pain and with a great augmentation in the submandibular area. Once the patient was debilitated and has difficult to swallow she invariably needed to be hospitalized in order to receive intravenous medication. During the hospitalization the sialolith could be seen through the opening of the duct and the calculi was removed with local anesthesia. CONCLUSION: The treatment of sialolithiasis usually does not present major challenges, nevertheless if the sialolithiasis is associated with EB, the treatment became an extremely challenge. In this particular case the option of treatment was the less invasive. CLINICAL RELEVANCE: This case report has an enormous clinical relevance once there is no protocol to treat patients with EB and buccal diseases.

Septic arthritis of the temporomandibular joint.

Septic arthritis of the temporomandibular joint is a rare acute infectious disease that requires attention from physicians and, once misdiagnosed, can have several implications for a patient. The most common microorganisms related to this disease are Staphylococcus aureus, Neisseria, Haemophilus influenzae, and Streptococcus. The infection of the joint may be caused by a direct spread of a local infection or by hematogenous inoculation from a distant focus. General predisposing factors, such as immunodepression, can eventually be found. The aim of the current study was to report a case in which a patient with an articular infection resulting from hematogenous dissemination from a distant site was successfully treated using joint drainage and systemic antibiotics. Secretion culture from the temporomandibular joint space was positive for S. aureus. After 1 month of antimicrobial therapy, the patient was asymptomatic and mandibular function was normal. Literature related to this topic was reviewed and discussed.

Delayed removal of maxillary third molar displaced into the maxillary sinus.

INTRODUCTION: The present article reports the late removal of a wisdom tooth displaced into the maxillary sinus associated with the curettage of the adjacent infection tissue, under general anesthesia. CASE DESCRIPTION: A male patient, 42 years-old, was forwarded to remove a right wisdom tooth which was displaced into the right maxillary sinus for 10 months. The patient reported that the tooth was tried to be removed using odontosection in two moments without any success. Since then, the patient has been having (applicants) episodes of sinusitis. It had been planned to remove the tooth and the cleaning of the right maxillary sinus. The surgical procedure was done through the Caldwell-Luc access, followed by the removal of the dental fragments which were into the maxillary sinus and curettage of the cavity in order to remove the granulation tissue, associated to copious irrigation. CONCLUSION: The surgical removal of the tooth displaced into the maxillary sinus associated with the sinus curettage was successfully achieved, solving the patient complaints.

Resistance and Stress Finite Element Analysis of Different Types of Fixation for Mandibular Orthognathic Surgery.

The aim of this study was to evaluate the stress and dislodgement resistance by finite element analysis of different types of fixation in mandibular orthognathic surgery. A 3D solid finite element model of a hemi-mandible was obtained. A bilateral sagittal split osteotomy was simulated and the distal segment was advanced 5 mm forward. After the adjustment and superimposing of segments, 9 different types of osteosynthesis with 2.0 miniplates and screws were simulated: A, one 4-hole conventional straight miniplate; B, one 4-hole locking straight miniplate; C, one 4-hole conventional miniplate and one bicortical screw; D, one 4-hole locking miniplate and 1 bicortical screws; E, one 6-hole conventional straight miniplate; F, one 6-hole locking miniplate; G, two 4-hole conventional straight miniplates; H, two 4-hole locking straight miniplates; and I, 3 bicortical screws in an inverted-L pattern. In each model, forces simulating the masticatory muscles were applied. The values of stress in the plates and screws were checked. The dislodgement resistance was checked at the proximal segment since the distal segment was stable because of the screen at the occlusal tooth. The regions with the lowest and highest displacement were measured. The offset between the osteotomized segments was verified by millimeter intervals. Inverted-L with bicortical screws was the model that had the lowest dislodgment and the model with the lowest tension was the one with two conventional plates. The results suggest that the tension was better distributed in the locking miniplates, but the locking screws presented higher concentration of tension.

Análise por Elementos Finitos das Forças Mastigatórias em uma Placa de Reconstrução Mandibular / Assessment of masticatory forces in a mandibular reconstruction titanium plate through finite element analysis

Ressecção cirúrgica é um tratamento radical de algumas patologias que acometem a mandíbula e suas estruturas associadas. A técnica baseia-se na remoção total da lesão com uma margem de segurança em toda a sua dimensão, podendo ser ela marginal ou parcial. A escolha dá-se pela proximidade da extensão da lesão com a margem inferior da mandíbula. Em situações de ressecção mandibular parcial, remove-se parcialmente a margem inferior da mandíbula o que, posteriormente, dificulta a reobtenção da estética e funcionalidade do aparelho estomatognático, sendo a área reconstruída com uma placa de reconstrução óssea. A análise de elementos finitos (AEF) é uma forma de análise matemática, que se fundamenta na divisão de uma estrutura em um número finito de pequenas áreas, denominado de elementos finitos. A essa divisão dá se o nome de "malha". Em geral, a AEF possui a capacidade de modelar matematicamente estruturas, tornando-se possível a aplicação de forças em qualquer ponto e/ou direção. Dessa forma, conseguem-se dados sobre a deformação e o grau de tensão inicial, sendo possível, assim, representar situações in vivo, expressando condições compatíveis com o real. O trabalho visa analisar e simular as tensões geradas pelas forças mastigatórias, com o uso de elementos finitos, em simulação de uma mandíbula reconstruída com placa e parafusos de titânio, após sua ressecção parcial... (AU)

Surgical ressection is a radical treatment of some pathologies that affect the mandible and its structures. The technique is based on total removal of the lesion with a safe margin in all extension of the bone. Partial mandible resection results in a difficult to obtain the aesthetic and functionality of the stomatognathic system. In such cases, is recommended a titanium plate commonly used to mandibular reconstruction. Finite Element Analysis (FEA) is a form of math analysis which is based on division of a structure in a finite number of small areas. In general, FEA has the ability to mathematically model structures making possible applying forces in any point and/ or direction. Thereby, it can bring forth datas of displacement and tension being possible representing in vivo situation. This study aims to analyze and simulate the tensions generated by the masticatory forces, using FEA in a mandibular reconstruction with titanium plate after partial resection... (AU)

Resistance and Stress Finite Element Analysis of Different Types of Fixation for Mandibular Orthognathic Surgery

Abstract The aim of this study was to evaluate the stress and dislodgement resistance by finite element analysis of different types of fixation in mandibular orthognathic surgery. A 3D solid finite element model of a hemi-mandible was obtained. A bilateral sagittal split osteotomy was simulated and the distal segment was advanced 5 mm forward. After the adjustment and superimposing of segments, 9 different types of osteosynthesis with 2.0 miniplates and screws were simulated: A, one 4-hole conventional straight miniplate; B, one 4-hole locking straight miniplate; C, one 4-hole conventional miniplate and one bicortical screw; D, one 4-hole locking miniplate and 1 bicortical screws; E, one 6-hole conventional straight miniplate; F, one 6-hole locking miniplate; G, two 4-hole conventional straight miniplates; H, two 4-hole locking straight miniplates; and I, 3 bicortical screws in an inverted-L pattern. In each model, forces simulating the masticatory muscles were applied. The values of stress in the plates and screws were checked. The dislodgement resistance was checked at the proximal segment since the distal segment was stable because of the screen at the occlusal tooth. The regions with the lowest and highest displacement were measured. The offset between the osteotomized segments was verified by millimeter intervals. Inverted-L with bicortical screws was the model that had the lowest dislodgment and the model with the lowest tension was the one with two conventional plates. The results suggest that the tension was better distributed in the locking miniplates, but the locking screws presented higher concentration of tension.

Resumo O objetivo deste estudo foi verificar o estresse e a resistência ao deslocamento, pela análise de elementos finitos, de diferentes tipos de fixação em cirurgia ortognática mandibular. Um modelo 3D de elementos finitos sólidos de uma hemi-mandíbula foi obtido. Uma osteotomia sagital bilateral foi simulada e o segmento distal foi avançado 5 mm. Após o ajuste e sobreposição dos segmentos, foram simulados 9 diferentes tipos de osteossíntese com miniplacas e parafusos 2.0: A, uma miniplaca reta convencional de 4 furos; B, uma miniplaca reta lock de 4 furos; C, uma miniplaca convencional de 4 furos e um parafuso bicortical; D, uma placa lock de 4 furos e 1 parafuso bicortical; E, uma miniplaca reta convencional de 6 furos; F, uma miniplaca lock de 6 furos; G, duas miniplacas retas convencionais de 4 furos; H, duas miniplacas lock de 4 furos; e I, três parafusos bicorticais em um padrão L invertido. Em cada modelo foram aplicadas forças simulando os músculos mastigatórios. Foram verificados os valores da tensão nas placas e parafusos. A resistência ao deslocamento foi verificada no segmento proximal, uma vez que o segmento distal era estável. Foi medida a região com o maior deslocamento inferior e superior. O deslocamento entre os segmentos osteotomizados foi verificado por intervalos milimétricos. Parafusos bicorticais em L invertido foram o modelo que teve o menor descolamento inferior, e o modelo com a tensão mais baixa foi o de duas placas convencionais. Os resultados sugerem que a tensão foi melhor distribuída nas miniplacas do tipo lock, mas os parafusos de fixação apresentaram maior concentração de tensão.

Delayed removal of maxillary third molar displaced into the infratemporal fossa / Extracción diferida del tercer molar maxilar desplazado a la fosa infratemporal

Third molar extraction is a common procedure and it is rarely associated with complications. One complication that may be associated with this procedure is displacement of the tooth into the infratemporal fossa, an anatomical structure that contains the temporalis muscle, medial and lateral pterygoid muscles, the pterygoid plexus, the maxillary artery and its branches, the mandibular nerve and its branches, and the chorda tympani. The present case report illustrates delayed surgical removal of a maxillary third molar that was displaced into the infratemporal fossa, via the intraoral access and under local anesthesia. Despite the rarity of this complication, oral and maxillofacial surgeons should be aware of its management and able to choose the optimal technique, taking into account the patient’s signs and symptoms as well as the knowledge and experience of the surgeon (AU)

La extracción del tercer molar es un procedimiento habitual que pocas veces se asocia a complicaciones. Una posible complicación asociada es el desplazamiento de la pieza dental a la fosa infratemporal, una estructura anatómica que contiene el músculo temporal, el músculo pterigoideo interno y externo, el plexo pterigoideo, la arteria maxilar y sus ramas, el nervio mandibular y sus ramas y la cuerda del tímpano (una rama del nervio facial). El caso descrito en este manuscrito ilustra la extracción quirúrgica diferida de un tercer molar maxilar que se había desplazado a la fosa infratemporal, a través de un acceso intraoral y con anestesia local. A pesar de que es una complicación excepcional, el cirujano experto en cirugía oral y maxilofacial debe conocer su tratamiento y seleccionar la técnica óptima, teniendo en cuenta los signos y síntomas manifestados por el paciente, y en función de sus conocimientos y experiencia (AU)

Fratura do corpo da mandíbula após exodontia de 2º molar inferior em paciente HIV positiva: relato de caso clínico / Mandibular body fracture after the extraction of the second lower molar in a HIV Positive patient: Case Report

Objetivo: relatar um caso clínico no qual uma fratura de corpo da mandíbula após exodontia do dente 37 em paciente soro positiva foi diagnosticada e tratada com sucesso por meio de redução cruenta com fixação interna estável. Relato de caso: a paciente foi submetida a procedimento cirúrgico sob anestesia geral, acesso cirúrgico submandibular tipo Risdon para exposição do traço de fratura. Para redução dos cotos ósseos foi instituído bloqueio maxilomandibular por meio de parafusos de bloqueio intermaxilar. A fixação interna estável da fratura foi realizada com placas e parafusos de titânio do sistema 2,0 mm (banda de tensão) e 2,3 mm (banda de compressão). Após, o bloqueio maxilo-mandibular foi removido e a oclusão checada. Considerações finais: as complicações ou acidentes em exodontias são sempre um fator que se deve ponderar ao planejar uma cirurgia. As fraturas mandibulares, apesar de raras, normalmente estão relacionadas ao emprego de forças excessivas durante o ato operatório, mas também podem ocorrer no pós-operatório, principalmente em decorrência do enfraquecimento ósseo na região da exodontia, não tendo a mandíbula força para suportar as cargas mastigatórias naquela região, levando à fratura.