Submicron Aggregation of Chemically Denatured Monoclonal Antibody.

Isothermal chemical denaturation (ICD) has been widely used to evaluate the conformational stability of therapeutic proteins such as monoclonal antibodies. However, the chemical unfolding pathway and the subsequent aggregation of antibodies are not yet well-understood. In the present work, we conducted a systematic study on an ICD-induced aggregation of a pharmaceutical monoclonal antibody. Using dynamic light scattering, we monitored formation and growth of submicron aggregates in various buffers. Our experiments revealed a nucleation-controlled submicron aggregation of the antibody in the presence of chemical denaturant. After the unfolded protein reached a steady state, we reduced the denaturant concentration by dilution or dialysis to trigger further aggregation after ICD. In this way, we studied the pH effect on aggregation of the stressed protein after removal of denaturant. The ICD-dilution experiment provides a practical means for studying the propensity of unfolded proteins to form aggregates under various formulation conditions. This unique method allows us to control the degree of protein unfolding and the initiation of post-ICD aggregation.

Metastability Gap in the Phase Diagram of Monoclonal IgG Antibody.

Crystallization of IgG antibodies has important applications in the fields of structural biology, biotechnology, and biopharmaceutics. However, a rational approach to crystallize antibodies is still lacking. In this work, we report a method to estimate the solubility of antibodies at various temperatures. We experimentally determined the full phase diagram of an IgG antibody. Using the full diagram, we examined the metastability gaps, i.e., the distance between the crystal solubility line and the liquid-liquid coexistence curve, of IgG antibodies. By comparing our results to the partial phase diagrams of other IgGs reported in literature, we found that IgG antibodies have similar metastability gaps. Thereby, we present an equation with two phenomenological parameters to predict the approximate location of the solubility line of IgG antibodies with respect to their liquid-liquid coexistence curves. We have previously shown that the coexistence curve of an antibody solution can be readily determined by the polyethylene glycol-induced liquid-liquid phase separation method. Combining the polyethylene glycol-induced liquid-liquid phase separation measurements and the phenomenological equation in this article, we provide a general and practical means to predict the thermodynamic conditions for crystallizing IgG antibodies in the solution environments of interest.

Influence of Arginine Salts on the Thermal Stability and Aggregation Kinetics of Monoclonal Antibody: Dominant Role of Anions.

Thermal stability of the CH2 domain for an IgG1 monoclonal antibody and its aggregation kinetics were systematically studied at pH 4.8, below its pI of 8.8 in individual solutions of arginine salts with acetate, glutamate (Glu-), chloride, and sulfate as the anion, in comparison to sodium chloride and sodium sulfate. Thermal unfolding temperature, Tm, an indicator of thermal stability, was measured by both differential scanning calorimetry (DSC) and differential scanning fluorimetry (DSF). The aggregation kinetics was determined by assessing reversibility for the CH2 domain in the DSC repetitive scans and then cross-examined by the isothermal aggregation study measured by size exclusion chromatography. The effect of Arg+ on the thermal stability and aggregation kinetics of the antibody is shown to be strongly anion-dependent: both ArgAceate and ArgGlu improve the stability, while both Arg2SO4 and ArgCl decrease it. Furthermore, the addition of ArgCl and Arg2SO4 accelerates the aggregation kinetic, but to a lesser extent than the respective Na+ salt, suggesting that Arg+ binds to the antibody more strongly than Na+. However, the binding of Arg+ did not lead to more destabilization of the CH2 domain by the Arg+ salts at low concentrations, comparing to the respective Na+ salt. This finding indicates that Arg+ prefers the protein surface, rather than the exposed backbone upon unfolding. Furthermore, the change in the ranking for affecting the thermal stability and aggregation kinetics as the salt concentration increases implies the presence of other multiple mechanisms, e.g., cluster formation through the homoion pairing between Arg+ molecules and their preferential exclusion from the protein surface, and heteroion pairing between Arg+ and SO42-.

Systems Biology and Peptide Engineering to Overcome Absorption Barriers for Oral Peptide Delivery: Dosage Form Optimization Case Study Preceding Clinical Translation.

Oral delivery of peptides and biological molecules promises significant benefits to patients as an alternative to daily injections, but the development of these formulations is challenging due to their low bioavailability and high pharmacokinetic variability. Our earlier work focused on the discovery of MEDI7219, a stabilized, lipidated, glucagon-like peptide 1 agonist peptide, and the selection of sodium chenodeoxycholate (Na CDC) and propyl gallate (PG) as permeation enhancer combinations. We hereby describe the development of the MEDI7219 tablet formulations and composition optimization via in vivo studies in dogs. We designed the MEDI7219 immediate-release tablets with the permeation enhancers Na CDC and PG. Immediate-release tablets were coated with an enteric coating that dissolves at pH ≥ 5.5 to target the upper duodenal region of the gastrointestinal tract and sustained-release tablets with a Carbopol bioadhesive polymer were coated with an enteric coating that dissolves at pH ≥ 7.0 to provide a longer presence at the absorption site in the gastrointestinal tract. In addition to immediate- and enteric-coated formulations, we also tested a proprietary delayed release erodible barrier layer tablet (OralogiKTM) to deliver the payload to the target site in the gastrointestinal tract. The design of tablet dosage forms based on the optimization of formulations resulted in up to 10.1% absolute oral bioavailability in dogs with variability as low as 26% for MEDI7219, paving the way for its clinical development.

Engineered Ultrasmall Nanoparticle Drug-Immune Conjugates with "Hit and Run" Tumor Delivery to Eradicate Gastric Cancer.

Despite advances by recently approved antibody-drug conjugates in treating advanced gastric cancer patients, substantial limitations remain. Here, several key obstacles are overcome by developing a first-in-class ultrasmall (sub-8-nanometer (nm)) anti-human epidermal growth factor receptor 2 (HER2)-targeting drug-immune conjugate nanoparticle therapy. This multivalent fluorescent core-shell silica nanoparticle bears multiple anti-HER2 single-chain variable fragments (scFv), topoisomerase inhibitors, and deferoxamine moieties. Most surprisingly, drawing upon its favorable physicochemical, pharmacokinetic, clearance, and target-specific dual-modality imaging properties in a "hit and run" approach, this conjugate eradicated HER2-expressing gastric tumors without any evidence of tumor regrowth, while exhibiting a wide therapeutic index. Therapeutic response mechanisms are accompanied by the activation of functional markers, as well as pathway-specific inhibition. Results highlight the potential clinical utility of this molecularly engineered particle drug-immune conjugate and underscore the versatility of the base platform as a carrier for conjugating an array of other immune products and payloads.

Toward closed-loop drug delivery: Integrating wearable technologies with transdermal drug delivery systems.

The recent advancement and prevalence of wearable technologies and their ability to make digital measurements of vital signs and wellness parameters have triggered a new paradigm in the management of diseases. Drug delivery as a function of stimuli or response from wearable, closed-loop systems can offer real-time on-demand or preprogrammed drug delivery capability and offer total management of disease states. Here we review the key opportunities in this space for development of closed-loop systems, given the advent of digital wearable technologies. Particular considerations and focus are given to closed-loop systems combined with transdermal drug delivery technologies.

Sensitive Colorimetric Detection of Interleukin-6 via Lateral Flow Assay Incorporated Silver Amplification Method.

Interleukin-6 (IL-6) is a pro/anti-inflammatory cytokine, the quantitative detection of which has been extensively considered for diagnosis of inflammatory associated diseases. However, there has not yet been a reliable, low-cost, and user-friendly platform developed for point-of-care (POC) detection of IL-6, which will eliminate the conventional costly, time-consuming, and complex assays. In this work, we developed a lateral flow assay for colorimetric detection of IL-6, using anti-IL-6 antibodies conjugated to gold nanoparticles (AuNPs) as the detection probes. Silver amplification technique was incorporated with the newly developed assay in order to enhance the obtained colorimetric signals, allowing sensitive detection of IL-6 in human serum in the desired physiological ranges (i.e., 5-1000 pg/mL). A limit of detection of 5 pg/mL could be achieved for IL-6 detection in serum with the amplification step which was not achievable in the standard assay. The corresponding specificity and reproducibility tests were all preformed to confirm the reliability of this assay for quantitative measurement of IL-6 in a POC manner.

Targeted oral peptide delivery using multi-unit particulates: Drug and permeation enhancer layering approach.

Oral delivery of peptides is a challenge due to their instability and their limited transport and absorption characteristics within the gastrointestinal tract. In this work, we used layering techniques in a fluidized bed dryer to create a configuration in which the active peptide, permeation enhancers, and polymers are coated to control the release of the peptide. Formulations were developed to disintegrate at pH values of 5.5 and 7.0. In addition, sustained-release or mucoadhesive polymers were coated to trigger release at a desired site in the gastrointestinal tract. Dissolution studies with a USP Type I (basket) apparatus confirmed the duration of release. Pharmacokinetic studies were performed in beagle dogs to evaluate bioavailability. A high-disintegration pH was found to be advantageous in enhancing bioavailability.

Development of an orally delivered GLP-1 receptor agonist through peptide engineering and drug delivery to treat chronic disease.

Peptide therapeutics are increasingly used in the treatment of disease, but their administration by injection reduces patient compliance and convenience, especially for chronic diseases. Thus, oral administration of a peptide therapeutic represents a significant advance in medicine, but is challenged by gastrointestinal instability and ineffective uptake into the circulation. Here, we have used glucagon-like peptide-1 (GLP-1) as a model peptide therapeutic for treating obesity-linked type 2 diabetes, a common chronic disease. We describe a comprehensive multidisciplinary approach leading to the development of MEDI7219, a GLP-1 receptor agonist (GLP-1RA) specifically engineered for oral delivery. Sites of protease/peptidase vulnerabilities in GLP-1 were removed by amino acid substitution and the peptide backbone was bis-lipidated to promote MEDI7219 reversible plasma protein binding without affecting potency. A combination of sodium chenodeoxycholate and propyl gallate was used to enhance bioavailability of MEDI7219 at the site of maximal gastrointestinal absorption, targeted by enteric-coated tablets. This synergistic approach resulted in MEDI7219 bioavailability of ~ 6% in dogs receiving oral tablets. In a dog model of obesity and insulin resistance, MEDI7219 oral tablets significantly decreased food intake, body weight and glucose excursions, validating the approach. This novel approach to the development of MEDI7219 provides a template for the development of other oral peptide therapeutics.

Advances in Sweat Wearables: Sample Extraction, Real-Time Biosensing, and Flexible Platforms.

Wearable biosensors for sweat-based analysis are gaining wide attention due to their potential use in personal health monitoring. Flexible wearable devices enable sweat analysis at the molecular level, facilitating noninvasive monitoring of physiological states via real-time monitoring of chemical biomarkers. Advances in sweat extraction technology, real-time biosensors, stretchable materials, device integration, and wireless digital technologies have led to the development of wearable sweat-biosensing devices that are light, flexible, comfortable, aesthetic, affordable, and informative. Herein, we summarize recent advances of sweat wearables from the aspects of sweat extraction, fabrication of stretchable biomaterials, and design of biosensing modules to enable continuous biochemical monitoring, which are essential for a biosensing device. Key chemical components of sweat, sweat capture methodologies, and considerations of flexible substrates for integrating real-time biosensors with electronics to bring innovations in the art of wearables are elaborated. The strategies and challenges involved in improving the wearable biosensing performance and the perspectives for designing sweat-based wearable biosensing devices are discussed.

Evaluation of Pyrrolobenzodiazepine-Loaded Nanoparticles: A Targeted Drug Delivery Approach.

We describe the development and evaluation of pyrrolobenzodiazepines (PBDs) in poly(dl-lactide-co-glycolide) and lipid nanoparticle drug delivery systems. We have established that the partition coefficient (LogP) of PBD is a key influencer of the encapsulation efficiency in nanoparticle systems, with higher LogP values associated with higher encapsulation efficiencies toward increased drug payload delivery and better antitumor efficacy. Cytotoxicity assays demonstrated that compounds with higher LogP values demonstrated higher 50% inhibitory concentration values than the free drug. In vivo efficacy studies in mice demonstrated that a single injection of nanoparticle PBD formulations could inhibit tumor growth for nearly 3 weeks, whereas the free drug failed to inhibit growth. Importantly, mice treated with PBD-loaded nanoparticles did not experience significant loss of body weight. These data demonstrate that nanoparticles containing PBD molecules can be used as an alternative to the widely used antibody drug conjugate approach in delivering cytotoxic PBDs.

Nanotherapeutics in oral and parenteral drug delivery: Key learnings and future outlooks as we think small.

Nanotechnology ushered the field of medicine in to a new era. Miniaturization, increased surface area, and the unique physicochemical properties in the nano dimension were explored for new applications. Pharmaceutical industry picked up the technology and early success came fast for oral drug delivery through improvement in dissolution properties of the active molecules. Many products were launched using the nanocrystal technology on the oral side. Further development of polymeric nanoparticles led to wide spread research of nanocarriers for parenteral delivery. While considerable efforts have gone in the last two decades for testing nanoparticles for tumor targeting, delivery into tumors has remained challenging and suboptimal. Inadequate in vivo models that didn't accurately reflect the age and vascularity of human tumors, and inability to reproducibly target therapeutic drugs to the tissue of interest due to intrinsic biodistribution of the particles and hence side effects, limited the number of studies that advanced to the clinic. Our article addresses the questions commonly asked by scientific researchers in nanomedicine: "Has nanoparticle technology yielded on its initial promise that scientists predicted towards improving therapeutic index and avoid toxicity by delivering molecules to target tissues or was it more of wishful thinking that had several roadblocks?" We answer this question by linking the relevance of nanoparticles to cancer immunotherapy. The advent of immunotherapy has begun to show the potential applicability of nanoparticles in a different light, to target the immune system. In this approach, nanoparticles may positively influence the immune system rather than create the targeted "magic bullet". Utilizing the intrinsic properties of nanoparticles for immune targeting as opposed to targeting the tumor can bring about a positive difference due to the underlying complex cancer mechanisms that can potentially overlap with the heterogeneous biodistribution of nanoparticles towards improving the acquired and innate immune responses. In this review, we have followed the progress of nanotechnology in pharmaceutical applications with key insights from oral and parenteral drug delivery, and how to modify our thinking to better utilize nanoparticles for immuno-oncology. In contrast to conventional "local" tumor targeting by nanoparticles, we propose a new mechanism whereby nanoparticles trigger priming of the T cells towards tumor destruction. The heterogenous biodistribution of nanoparticles lends itself to stimulating immune cells systemically in a "global" manner and with the right therapeutic combinations will be able to trigger tumor antigens to continually activate, retain memory effects and destroy tumor cells.

Ultrasmall targeted nanoparticles with engineered antibody fragments for imaging detection of HER2-overexpressing breast cancer.

Controlling the biodistribution of nanoparticles upon intravenous injection is the key to achieving target specificity. One of the impediments in nanoparticle-based tumor targeting is the inability to limit the trafficking of nanoparticles to liver and other organs leading to smaller accumulated amounts in tumor tissues, particularly via passive targeting. Here we overcome both these challenges by designing nanoparticles that combine the specificity of antibodies with favorable particle biodistribution profiles, while not exceeding the threshold for renal filtration as a combined vehicle. To that end, ultrasmall silica nanoparticles are functionalized with anti-human epidermal growth factor receptor 2 (HER2) single-chain variable fragments to exhibit high tumor-targeting efficiency and efficient renal clearance. This ultrasmall targeted nanotheranostics/nanotherapeutic platform has broad utility, both for imaging a variety of tumor tissues by suitably adopting the targeting fragment and as a potentially useful drug delivery vehicle.

Improving drug-like properties of insulin and GLP-1 via molecule design and formulation and improving diabetes management with device & drug delivery.

There is an increased incidence of diabetes worldwide. The discovery of insulin revolutionized the management of diabetes, the revelation of glucagon-like peptide-1 (GLP-1) and introduction of GLP-1 receptor agonists to clinical practice was another breakthrough. Continued translational research resulted in better understanding of diabetes, which, in combination with cutting-edge biology, chemistry, and pharmaceutical tools, have allowed for the development of safer, more effective and convenient insulins and GLP-1. Advances in self-administration of insulin and GLP-1 receptor agonist therapies with use of drug-device combination products have further improved the outcomes of diabetes management and quality of life for diabetic patients. The synergies of insulin and GLP-1 receptor agonist actions have led to development of devices that can deliver both molecules simultaneously. New chimeric GLP-1-incretins and insulin-GLP-1-incretin molecules are also being developed. The objective of this review is to summarize molecular designs to improve the drug-like properties of insulin and GLP-1 and to highlight the continued advancement of drug-device combination products to improve diabetes management.

Composite iron oxide-Prussian blue nanoparticles for magnetically guided T1-weighted magnetic resonance imaging and photothermal therapy of tumors.

Theranostic nanoparticles offer the potential for mixing and matching disparate diagnostic and therapeutic functionalities within a single nanoparticle for the personalized treatment of diseases. In this article, we present composite iron oxide-gadolinium-containing Prussian blue nanoparticles (Fe3O4@GdPB) as a novel theranostic agent for T1-weighted magnetic resonance imaging (MRI) and photothermal therapy (PTT) of tumors. These particles combine the well-described properties and safety profiles of the constituent Fe3O4 nanoparticles and gadolinium-containing Prussian blue nanoparticles. The Fe3O4@GdPB nanoparticles function both as effective MRI contrast agents and PTT agents as determined by characterizing studies performed in vitro and retain their properties in the presence of cells. Importantly, the Fe3O4@GdPB nanoparticles function as effective MRI contrast agents in vivo by increasing signal:noise ratios in T1-weighted scans of tumors and as effective PTT agents in vivo by decreasing tumor growth rates and increasing survival in an animal model of neuroblastoma. These findings demonstrate the potential of the Fe3O4@GdPB nanoparticles to function as effective theranostic agents.

Thermosensitive Gel-Based Formulation for Intratumoral Delivery of Toll-Like Receptor 7/8 Dual Agonist, MEDI9197.

Toll-like receptor (TLR) agonists TLR 7/8, MEDI9197, is a imidazoquinoline analogue that can be used for cancer immunotherapy based on its efficacy toward a variety of tumors. Systemic administration of TLR agonists results in stimulation of the immune system throughout the entire body causing undesirable side effects. To minimize these adverse events, local administration of TLR agonists including intratumoral (IT) delivery has been introduced. Here, a poloxamer 407 thermogel formulation for IT delivery of a TLR 7/8 dual agonist, MEDI9197, is described in which the combination of the aqueous thermogel and the ethanolic TLR 7/8 dual agonist, MEDI9197, solution leads to precipitated drug particles within the gel. The in vitro release profile showed an initial burst followed by sustained release. A B16-OVA mouse tumor model was used to assess the in vivo pharmacokinetics, efficacy, and systemic cytokine and chemokine (cytokine) production of the poloxamer 407-based thermogel formulation. The pharmacokinetic evaluation showed that the agonist level within the tumor was reduced by ∼70% over 14 days while serum agonist levels indicated an initial burst at the 6-h time point followed by a drop in serum drug levels over the 14 days of the experiment. The tumor growth inhibition, survival, and serum cytokines for post-IT injection of the poloxamer 407 formulation showed that it slowly released TLR 7/8 agonist, MEDI9197, resulting in more efficacious tumor growth inhibition compared with control groups. In addition, the cytokine levels in circulation indicated that a dose increase led to a decrease in the serum inflammatory and interferon-inducible cytokines levels. This observation could be due to a reduction of drug diffusion and escape from the tumor site due to the precipitation of the drug inside the tumor leading to sustained release. IT delivery of TLR 7/8 dual agonist, MEDI9197, via a thermosensitive gel-based formulation was efficacious and could offer an alternate method of local drug delivery.

Microprocessor controlled transdermal drug delivery.

Transdermal drug delivery via iontophoresis is reviewed with special focus on the delivery of lidocaine for local anesthesia and fentanyl for patient controlled acute therapy such as postoperative pain. The role of the microprocessor controller in achieving dosimetry, alternating/reverse polarity, pre-programmed, and sensor-based delivery is highlighted. Unique features such as the use of tactile signaling, telemetry control, and pulsatile waveforms in iontophoretic drug delivery are described briefly.

Understanding Subcutaneous Tissue Pressure for Engineering Injection Devices for Large-Volume Protein Delivery.

Subcutaneous injection allows for self-administration of monoclonal antibodies using prefilled syringes, autoinjectors, and on-body injector devices. However, subcutaneous injections are typically limited to 1 mL due to concerns of injection pain from volume, viscosity, and formulation characteristics. Back pressure can serve as an indicator for changes in subcutaneous mechanical properties leading to pain during injection. The purpose of this study was to investigate subcutaneous pressures and injection site reactions as a function of injection volume and flow rate. A pressure sensor in the fluid path recorded subcutaneous pressures in the abdomen of Yorkshire swine. The subcutaneous tissue accommodates large-volume injections and with little back pressure as long as low flow rates are used. A 1 mL injection in 10 seconds (360 mL/h flow rate) generated a pressure of 24.0 ± 3.4 kPa, whereas 10 mL delivered in 10 minutes (60 mL/h flow rate) generated a pressure of 7.4 ± 7.8 kPa. After the injection, the pressure decays to 0 over several seconds. The subcutaneous pressures and mechanical strain increased with increasing flow rate but not increasing dose volume. These data are useful for the design of injection devices to mitigate back pressure and pain during subcutaneous large-volume injection.

Reactions of the Dirhenium(II) Complexes Re(2)X(4)(&mgr;-dppm)(2) (X = Cl, Br; dppm = Ph(2)PCH(2)PPh(2)) with Isocyanides. 11.(1) A Triply Bonded Dirhenium Complex Containing a Labile Acetonitrile Ligand. Synthesis, Structural Characterization, and Reactivity of [(XylNC)(CH(3)CN)ClRe(&mgr;-dppm)(2)ReCl(2)(CO)]O(3)SCF(3).

The reaction of the open bioctahedral form of Re(2)Cl(4)(&mgr;-dppm)(2)(CO)(CNXyl) (1), where XylNC = 2,6-dimethylphenyl isocyanide, with TlO(3)SCF(3) in the presence of acetonitrile proceeds with retention of stereochemistry at the dirhenium unit to afford the complex [Re(2)Cl(3)(&mgr;-dppm)(2)(CO)(CNXyl)(NCCH(3))]O(3)SCF(3) (3). The single-crystal X-ray structure determination of 3 shows that a Re&tbd1;Re bond is retained (the Re-Re distance is 2.378(3) Å) and that it is the chloride ligand trans to the XylNC ligand of 1 which is labilized. Complex 1 reacts with TlO(3)SCF(3) in a noncoordinating solvent to produce the unsymmetrical complex [Re(2)Cl(3)(&mgr;-dppm)(2)(CO)(CNXyl)]O(3)SCF(3) (2), through loss of this same chloride ligand of 1 and CO transfer from the adjacent Re center. The acetonitrile ligand of 3 is very labile and is readily displaced by XylNC and t-BuNC, with retention of stereochemistry, to produce complexes of stoichiometry [Re(2)Cl(3)(&mgr;-dppm)(2)(CO)(CNXyl)(CNR)]O(3)SCF(3) (R = Xyl, 4a; R = t-Bu, 4b). In a noncoordinating solvent, the nitrile ligand of 3 is lost and 2 is formed following CO transfer; this conversion is reversed upon the reaction of 2 with acetonitrile. When 3 is treated with CO, the acetonitrile ligand is again displaced, but in this instance the reaction is accompanied by a structure change to produce an edge-sharing bioctahedral complex of the type [Re(2)(&mgr;-CO)(&mgr;-Cl)(&mgr;-dppm)(2)Cl(2)(CO)(CNXyl)]O(3)SCF(3) (5).

Needle free parenteral drug delivery: leveraging active transdermal technologies for pediatric use.

Administration of medications via the parenteral route directly to the systemic circulation is an effective way of overcoming the first pass effect, obtaining quicker onset of action, and achieving higher bioavailability. However, needle phobia and the pain perceived during the injection process often make this a less preferred route than oral in terms of patient acceptance and compliance, particularly for pediatrics. Needleless injection technologies that deliver medications via the transdermal interface have been an active area of pharmaceutical research for many years. This review summarizes the various emerging technologies in the area of active transdermal delivery that can be potentially extended to pediatric applications.