RESUMEN
Many biological motor molecules move within cells using stepsizes predictable from their structures. Myosin VI, however, has much larger and more broadly distributed stepsizes than those predicted from its short lever arms. We explain the discrepancy by monitoring Qdots and gold nanoparticles attached to the myosin-VI motor domains using high-sensitivity nanoimaging. The large stepsizes were attributed to an extended and relatively rigid lever arm; their variability to two stepsizes, one large (72 nm) and one small (44 nm). These results suggest that there exist two tilt angles during myosin-VI stepping, which correspond to the pre- and postpowerstroke states and regulate the leading head. The large steps are consistent with the previously reported hand-over-hand mechanism, while the small steps follow an inchworm-like mechanism and increase in frequency with ADP. Switching between these two mechanisms in a strain-sensitive, ADP-dependent manner allows myosin VI to fulfill its multiple cellular tasks including vesicle transport and membrane anchoring.
Asunto(s)
Cadenas Pesadas de Miosina/química , Cadenas Pesadas de Miosina/metabolismo , Actinas/metabolismo , Animales , Pollos , Dimerización , Oro , Humanos , Nanopartículas del Metal , Microscopía , Microscopía Fluorescente , Modelos Biológicos , Modelos Moleculares , Estructura Terciaria de Proteína , Puntos CuánticosRESUMEN
F1-ATPase is the world's smallest biological rotary motor driven by ATP hydrolysis at three catalytic ß subunits. The 120° rotational step of the central shaft γ consists of 80° substep driven by ATP binding and a subsequent 40° substep. In order to correlate timing of ATP cleavage at a specific catalytic site with a rotary angle, we designed a new F1-ATPase (F1) from thermophilic Bacillus PS3 carrying ß(E190D/F414E/F420E) mutations, which cause extremely slow rates of both ATP cleavage and ATP binding. We produced an F1 molecule that consists of one mutant ß and two wild-type ßs (hybrid F1). As a result, the new hybrid F1 showed two pausing angles that are separated by 200°. They are attributable to two slowed reaction steps in the mutated ß, thus providing the direct evidence that ATP cleavage occurs at 200° rather than 80° subsequent to ATP binding at 0°. This scenario resolves the long-standing unclarified issue in the chemomechanical coupling scheme and gives insights into the mechanism of driving unidirectional rotation.
Asunto(s)
Bacillus , ATPasas de Translocación de Protón , ATPasas de Translocación de Protón/química , Bacillus/metabolismo , Adenosina Trifosfato/metabolismo , Catálisis , Proteínas Motoras Moleculares/metabolismo , HidrólisisRESUMEN
Cin8, the Saccharomyces cerevisiae kinesin-5, has an essential role in mitosis. In in vitro motility assays, tetrameric and dimeric Cin8 constructs showed bidirectional motility in response to ionic strength or Cin8 motor density. However, whether property-switching directionality is present in a monomeric form of Cin8 is unknown. Here we engineered monomeric Cin8 constructs with and without the Cin8-specific â¼99 residues in the loop 8 domain and examined the directionality of these constructs using an in vitro polarity-marked microtubule gliding assay within the range of the motor density or ionic strength. We found that both monomeric constructs showed only plus end-directed activity over the ranges measured, which suggested that minus end-directed motility driven by Cin8 is necessary for at least dimeric forms. Using an in vitro microtubule corkscrewing assay, we also found that monomeric Cin8 corkscrewed microtubules around their longitudinal axes with a constant left-handed pitch. Overall, our results imply that plus-end-directed and left-handed motor activity comprise the intrinsic properties of the Cin8 motor domain as with other monomeric N-kinesins.
Asunto(s)
Cinesinas/química , Cinesinas/metabolismo , Microtúbulos/metabolismo , Proteínas de Saccharomyces cerevisiae/química , Proteínas de Saccharomyces cerevisiae/metabolismo , Cinesinas/genética , Mutación , Proteínas de Saccharomyces cerevisiae/genéticaRESUMEN
Despite extensive studies, the structural basis for the mechanochemical coupling in the rotary molecular motor F1-ATPase (F1) is still incomplete. We performed single-molecule FRET measurements to monitor conformational changes in the stator ring-α3ß3, while simultaneously monitoring rotations of the central shaft-γ. In the ATP waiting dwell, two of three ß-subunits simultaneously adopt low FRET nonclosed forms. By contrast, in the catalytic intermediate dwell, two ß-subunits are simultaneously in a high FRET closed form. These differences allow us to assign crystal structures directly to both major dwell states, thus resolving a long-standing issue and establishing a firm connection between F1 structure and the rotation angle of the motor. Remarkably, a structure of F1 in an ε-inhibited state is consistent with the unique FRET signature of the ATP waiting dwell, while most crystal structures capture the structure in the catalytic dwell. Principal component analysis of the available crystal structures further clarifies the five-step conformational transitions of the αß-dimer in the ATPase cycle, highlighting the two dominant modes: the opening/closing motions of ß and the loosening/tightening motions at the αß-interface. These results provide a new view of tripartite coupling among chemical reactions, stator conformations, and rotary angles in F1-ATPase.
Asunto(s)
Bacillus/enzimología , Proteínas Bacterianas/química , Transferencia Resonante de Energía de Fluorescencia , ATPasas de Translocación de Protón/química , Conformación ProteicaRESUMEN
Single-molecule fluorescence polarization technique has been utilized to detect structural changes in biomolecules and intermolecular interactions. Here we developed a single-molecule fluorescence polarization measurement system, named circular orientation fluorescence emitter imaging (COFEI), in which a ring pattern of an acquired fluorescent image (COFEI image) represents an orientation of a polarization and a polarization factor. Rotation and pattern change of the COFEI image allow us to find changes in the polarization by eye and further values of the parameters of a polarization are determined by simple image analysis with high accuracy. We validated its potential applications of COFEI by three assays: 1) Detection of stepwise rotation of F1-ATPase via single quantum nanorod attached to the rotary shaft γ; 2) Visualization of binding of fluorescent ATP analog to the catalytic subunit in F1-ATPase; and 3) Association and dissociation of one head of dimeric kinesin-1 on the microtubule during its processive movement through single bifunctional fluorescent probes attached to the head. These results indicate that the COFEI provides us the advantages of the user-friendly measurement system and persuasive data presentations.
Asunto(s)
Proteínas Bacterianas/química , Proteínas Motoras Moleculares/química , ATPasas de Translocación de Protón/química , Imagen Individual de Molécula/métodos , Adenosina Trifosfato/química , Adenosina Trifosfato/metabolismo , Bacillus/enzimología , Proteínas Bacterianas/metabolismo , Polarización de Fluorescencia , Cinesinas/química , Cinesinas/metabolismo , Cinética , Microscopía Fluorescente , Proteínas Motoras Moleculares/metabolismo , Unión Proteica , ATPasas de Translocación de Protón/metabolismo , RotaciónRESUMEN
Among the bacteria that glide on substrate surfaces, Mycoplasma mobile is one of the fastest, exhibiting smooth movement with a speed of 2.0-4.5 µmâ s(-1) with a cycle of attachment to and detachment from sialylated oligosaccharides. To study the gliding mechanism at the molecular level, we applied an assay with a fluorescently labeled and membrane-permeabilized ghost model, and investigated the motility by high precision colocalization microscopy. Under conditions designed to reduce the number of motor interactions on a randomly oriented substrate, ghosts took unitary 70-nm steps in the direction of gliding. Although it remains possible that the stepping behavior is produced by multiple interactions, our data suggest that these steps are produced by a unitary gliding machine that need not move between sites arranged on a cytoskeletal lattice.
Asunto(s)
Adenosina Trifosfato/metabolismo , Adhesión Bacteriana/fisiología , Fenómenos Fisiológicos Bacterianos , Mycoplasma/fisiología , Adenosina Difosfato/metabolismo , Adenosina Trifosfato/farmacología , Proteínas Bacterianas/metabolismo , Relación Dosis-Respuesta a Droga , Hidrólisis , Microscopía Fluorescente , Modelos Biológicos , Movimiento/efectos de los fármacos , Movimiento/fisiología , Mycoplasma/metabolismo , Oligosacáridos/metabolismo , ATPasas de Translocación de Protón/metabolismo , Factores de TiempoRESUMEN
Mycoplasma mobile is one of the fastest gliding bacteria, gliding with a speed of 4.5 µm s-1. This gliding motility is driven by a concerted movement of 450 supramolecular motor units composed of three proteins, Gli123, Gli349, and Gli521, in the gliding motility machinery. With general experimental setups, it is difficult to obtain the information on how each motor unit works. This chapter describes strategies to decrease the number of active motor units to extract stepwise cell movements driven by a minimum number of motor units. We also describe an unforeseen motility mode in which the leg motions convert the gliding motion into rotary motion, which enables us to characterize the motor torque and energy-conversion efficiency by adding some more assumptions.
Asunto(s)
Proteínas Bacterianas , Mycoplasma , Proteínas Bacterianas/metabolismo , Rotación , Mycoplasma/metabolismo , MovimientoRESUMEN
Myosin VI is an adenosine triphosphate (ATP)-driven dimeric molecular motor that has dual function as a vesicle transporter and a cytoskeletal anchor. Recently, it was reported that myosin VI generates three types of steps by taking either a distant binding or adjacent binding state (noncanonical hand-over-hand step pathway). The adjacent binding state, in which both heads bind to an actin filament near one another, is unique to myosin VI and therefore may help explain its distinct features. However, detailed information of the adjacent binding state remains unclear. Here simultaneous observations of the head and tail domain during stepping are presented. These observations show that the lever arms tilt forward in the adjacent binding state. Furthermore, it is revealed that either head could take the subsequent step with equal probability from this state. Together with previous results, a comprehensive stepping scheme is proposed; it includes the tail domain motion to explain how myosin VI achieves its dual function.
Asunto(s)
Cadenas Pesadas de Miosina/química , Actinas/metabolismo , Sitios de Unión , Humanos , Cinética , Cadenas Pesadas de Miosina/metabolismo , Unión Proteica , Estructura Terciaria de ProteínaRESUMEN
Kinesin motor domains generate impulses of force and movement that have both translational and rotational (torque) components. Here, we ask how the torque component influences function in cargo-attached teams of weakly processive kinesins. Using an assay in which kinesin-coated gold nanorods (kinesin-GNRs) translocate on suspended microtubules, we show that for both single-headed KIF1A and dimeric ZEN-4, the intensities of polarized light scattered by the kinesin-GNRs in two orthogonal directions periodically oscillate as the GNRs crawl towards microtubule plus ends, indicating that translocating kinesin-GNRs unidirectionally rotate about their short (yaw) axes whilst following an overall left-handed helical orbit around the microtubule axis. For orientations of the GNR that generate a signal, the period of this short axis rotation corresponds to two periods of the overall helical trajectory. Torque force thus drives both rolling and yawing of near-spherical cargoes carrying rigidly-attached weakly processive kinesins, with possible relevance to intracellular transport.
Asunto(s)
Cinesinas , Nanotubos , Torque , Oro , MicrotúbulosRESUMEN
F(1)-ATPase is a water-soluble portion of F(o)F(1)-ATP synthase and rotary molecular motor that exhibits reversibility in chemical reactions. The rotational motion of the shaft subunit γ has been carefully scrutinized in previous studies, but a tilting motion of the shaft has never been explicitly postulated. Here we found a change in the radius of rotation of the probe attached to the shaft subunit γ between two different intermediate states in ATP hydrolysis: one waiting for ATP binding, and the other waiting for ATP hydrolysis and/or subsequent product release. Analysis of this radial difference indicates a ~4° outward tilting of the γ-subunit induced by ATP binding. The tilt angle is a new parameter, to our knowledge, representing the motion of the γ-subunit and provides a new constraint condition of the ATP-waiting conformation of F(1)-ATPase, which has not been determined as an atomic structure from x-ray crystallography.
Asunto(s)
Bacillus/enzimología , ATPasas de Translocación de Protón/química , Rotación , Adenosina Difosfato/farmacología , Bacillus/efectos de los fármacos , Modelos Moleculares , Proteínas Mutantes/química , ATPasas de Translocación de Protón/antagonistas & inhibidoresRESUMEN
Centralspindlin, a complex of the MKLP1 kinesin-6 and CYK4 GAP subunits, plays key roles in metazoan cytokinesis. CYK4-binding to the long neck region of MKLP1 restricts the configuration of the two MKLP1 motor domains in the centralspindlin. However, it is unclear how the CYK4-binding modulates the interaction of MKLP1 with a microtubule. Here, we performed three-dimensional nanometry of a microbead coated with multiple MKLP1 molecules on a freely suspended microtubule. We found that beads driven by dimeric MKLP1 exhibited persistently left-handed helical trajectories around the microtubule axis, indicating torque generation. By contrast, centralspindlin, like monomeric MKLP1, showed similarly left-handed but less persistent helical movement with occasional rightward movements. Analysis of the fluctuating helical movement indicated that the MKLP1 stochastically makes off-axis motions biased towards the protofilament on the left. CYK4-binding to the neck domains in MKLP1 enables more flexible off-axis motion of centralspindlin, which would help to avoid obstacles along crowded spindle microtubules.
Asunto(s)
Proteínas de Caenorhabditis elegans/metabolismo , Cinesinas/metabolismo , Proteínas Asociadas a Microtúbulos/metabolismo , Microtúbulos/metabolismo , Huso Acromático/metabolismo , Tubulina (Proteína)/metabolismo , Animales , Proteínas de Caenorhabditis elegans/química , Proteínas de Caenorhabditis elegans/genética , Cinesinas/química , Cinesinas/genética , Cinética , Cadenas de Markov , Proteínas Asociadas a Microtúbulos/química , Proteínas Asociadas a Microtúbulos/genética , Microtúbulos/química , Microtúbulos/genética , Modelos Teóricos , Complejos Multiproteicos , Unión Proteica , Conformación Proteica en Hélice alfa , Dominios y Motivos de Interacción de Proteínas , Huso Acromático/química , Huso Acromático/genética , Procesos Estocásticos , Sus scrofa , Tubulina (Proteína)/químicaRESUMEN
Anillin is a type of actin filament cross-linking protein that stabilizes the actin-based contractile ring during cytokinesis. To elucidate the underlying intermolecular interactions between actin filaments and anillin, we utilized total internal reflection fluorescence microscopy (TIRFM) and high-speed atomic force microscopy (Hs-AFM). Single-molecule imaging of anillin using TIRFM showed that anillin exists as monomers with relatively low binding affinity for actin filaments. Real-time imaging of actin filament cross-linking dynamics induced by anillin using Hs-AFM revealed that anillin monomers cross-link with actin filaments at a distance of 8 nm and that the polarity of those filaments is both parallel and antiparallel. These results are consistent with anillin playing a role in actin ring transition in vivo, where it might be responsible for thinning the ring-shaped apolar actin bundles.
Asunto(s)
Actinas/metabolismo , Proteínas de Microfilamentos/metabolismo , Citoesqueleto de Actina/metabolismo , Actinas/análisis , Actinas/química , Sitios de Unión , Proteínas Fluorescentes Verdes/genética , Proteínas Fluorescentes Verdes/metabolismo , Células HEK293 , Humanos , Proteínas de Microfilamentos/genética , Microscopía de Fuerza Atómica , Microscopía Fluorescente/métodos , Imagen Molecular/métodos , FotoblanqueoRESUMEN
In in vitro microtubule gliding assays, most kinesins drive the rotation of gliding microtubules around their longitudinal axes in a corkscrew motion. The corkscrewing pitch is smaller than the supertwisted protofilament pitch of microtubules, indicating that the corkscrewing pitch is an inherent property of kinesins. To elucidate the molecular mechanisms through which kinesins corkscrew the microtubule, we performed three-dimensional tracking of a quantum dot bound to a microtubule translocating over a surface coated with single-headed kinesin-1 s under various assay conditions to alter the interactions between the kinesin and microtubule. Although alternations in kinesin concentration, ionic strength, and ATP concentration changed both gliding and rotational velocities, the corkscrewing pitch remained left-handed and constant at ~0.3 µm under all tested conditions apart from a slight increase in pitch at a low ATP concentration. We then used our system to analyze the effect of point mutations in the N-terminal ß-strand protruding from the kinesin motor core and found mutations that decreased the corkscrewing pitch. Our findings confirmed that the corkscrewing motion of microtubules is caused by the intrinsic properties of the kinesin and demonstrates that changes in the active or retarding force originating from the N-terminal ß-strand in the head modulate the pitch.
Asunto(s)
Cinesinas/metabolismo , Conformación Proteica en Lámina beta/fisiología , HumanosRESUMEN
F1-ATPase is a rotary motor protein in which the central γ-subunit rotates inside the cylinder made of α3ß3 subunits. To investigate interactions between the γ shaft and the cylinder at the molecular scale, load was imposed on γ through a polystyrene bead by three-dimensional optical trapping in the direction along which the shaft penetrates the cylinder. Pull-out event was observed under high-load, and thus load-dependency of lifetime of the interaction was estimated. Notably, accumulated counts of lifetime were comprised of fast and slow components. Both components exponentially dropped with imposed loads, suggesting that the binding energy is compensated by the work done by optical trapping. Because the mutant, in which the half of the shaft was deleted, showed only one fast component in the bond lifetime, the slow component is likely due to the native interaction mode held by multiple interfaces.
Asunto(s)
Proteínas Motoras Moleculares/metabolismo , ATPasas de Translocación de Protón/metabolismo , Adenosina Trifosfato/metabolismo , Fenómenos Biofísicos/fisiología , Modelos Moleculares , Conformación Proteica , ATPasas de Translocación de Protón/fisiología , Rotación , TorqueRESUMEN
Single molecule fluorescence resonance energy transfer (FRET) is the technique that has been developed by combining FRET measurement and single molecule fluorescence imaging. This technique allows us to measure the dynamic changes of the interaction and structures of biomolecules. In this study, the validity of the method was tested using fluorescence dyes on double stranded DNA molecules as a rigid spacer. FRET signals from double stranded DNA molecules were stable and their average FRET values provided the distance between the donor and acceptor in agreement with B-DNA type helix model. Next, the single molecule FRET method was applied to the studies on the dynamic structure of Ras, a signaling protein. The data showed that Ras has multiple conformational states and undergoes transition between them. This study on the dynamic conformation of Ras provided a clue for understanding the molecular mechanism of cell signaling switches.
Asunto(s)
Transferencia Resonante de Energía de Fluorescencia/métodos , ADN/química , Transferencia Resonante de Energía de Fluorescencia/instrumentación , Colorantes Fluorescentes , Biología de Sistemas , Termodinámica , Proteínas ras/químicaRESUMEN
Kinesin-14 is a unique minus-end-directed microtubule-based motor. A swinging motion of a class-specific N-terminal neck helix has been proposed to produce minus-end directionality. However, it is unclear how swinging of the neck helix is driven by ATP hydrolysis utilizing the highly conserved catalytic core among all kinesins. Here, using a motility assay, we show that in addition to the neck helix, the conserved five residues at the C-terminal region in kinesin-14, namely the neck mimic, are necessary to give kinesin-1 an ability to reverse its directionality toward the minus end of microtubules. Our structural analyses further demonstrate that the C-terminal neck mimic, in cooperation with conformational changes in the catalytic core during ATP binding, forms a kinesin-14 bundle with the N-terminal neck helix to swing toward the minus end of microtubules. Thus, the neck mimic plays a crucial role in coupling the chemical ATPase reaction with the mechanical cycle to produce the minus-end-directed motility of kinesin-14.
Asunto(s)
Adenosina Difosfato/química , Adenosina Trifosfato/química , Proteínas de Drosophila/química , Cinesinas/química , Microtúbulos/metabolismo , Proteínas Recombinantes de Fusión/química , Adenosina Difosfato/metabolismo , Adenosina Trifosfato/metabolismo , Secuencia de Aminoácidos , Animales , Dominio Catalítico , Cristalografía por Rayos X , Proteínas de Drosophila/genética , Proteínas de Drosophila/metabolismo , Drosophila melanogaster/química , Drosophila melanogaster/metabolismo , Expresión Génica , Cinesinas/genética , Cinesinas/metabolismo , Microtúbulos/ultraestructura , Simulación del Acoplamiento Molecular , Simulación de Dinámica Molecular , Movimiento (Física) , Unión Proteica , Conformación Proteica en Hélice alfa , Conformación Proteica en Lámina beta , Dominios y Motivos de Interacción de Proteínas , Isoformas de Proteínas/química , Isoformas de Proteínas/genética , Isoformas de Proteínas/metabolismo , Ratas , Proteínas Recombinantes de Fusión/genética , Proteínas Recombinantes de Fusión/metabolismo , TermodinámicaRESUMEN
Transformations between G- (monomeric) and F-actin (polymeric) are important in cellular behaviors such as migration, cytokinesis, and morphing. In order to understand these transitions, we combined single-molecule Förster resonance energy transfer with total internal reflection fluorescence microscopy to examine conformational changes of individual actin protomers. We found that the protomers can take different conformational states and that the transition interval is in the range of hundreds of seconds. The distribution of these states was dependent on the environment, suggesting that actin undergoes spontaneous structural changes that accommodate itself to polymerization.