RESUMEN
To evaluate contamination by polybrominated diphenyl ethers (PBDEs) in market hens and human PBDE exposure via hen consumption in Guangzhou, hens were collected and their muscle, liver, fat, blood, yolk, and ingluvies tissues were analyzed for 13 PBDE congeners. The median highest concentration of ∑PBDEs was found in the ingluvies (5.30â¯ng/g lw), followed by the muscle (2.53â¯ng/g lw), with the lowest located in the yolk (0.09â¯ng/g lw). The concentrations of PBDEs in the muscle tissue of market hens in Guangzhou were at medium levels compared to others reported around the world. BDE-47, -153, -99, and -183 were the predominant congeners. The daily intake concentrations of PBDEs from hen muscle were estimated to range from 0.08 to 0.31â¯ng/kg/day in this study, with a Hazard Quotient (HQ) below 1.0. These results suggest that the health risk of PBDEs for the general population, through the consumption of market hens in Guangzhou, was generally low. However, the intake of PBDEs via food consumption may be one major exposure pathway for the general population of Guangzhou.
Asunto(s)
Exposición Dietética/análisis , Contaminantes Ambientales/análisis , Contaminación de Alimentos/análisis , Éteres Difenilos Halogenados/análisis , Hidrocarburos Bromados/análisis , Carne/análisis , Animales , Pollos , China , Femenino , Humanos , Análisis de Componente PrincipalRESUMEN
To cope with the increasing environmental issues of red mud, an integrated technological route for its comprehensive utilization was developed through the extraction of valuable components and the synthesis of magnetic 4A-zeolite. To accelerate the crystallization process of the synthesized 4A-zeolite, sodium chloride (NaCl) was innovatively employed under hydrothermal treatment. The effects of various parameters, including mass ratio of red mud/NaOH, alkali fusion temperature, alkali fusion time and molar ratio of NaCl/Al2O3, were systematically investigated. The results showed that approximately 81.0% Al, 76.1% Si and 95.8% Fe were utilized from red mud using alkali fusion and acid leaching methods. The optimal conditions of the alkali fusion process were determined as: mass ratio of red mud/NaOHâ¯=â¯1/2, alkali fusion temperature of 800⯰C, and time of 90â¯min. Furthermore, when the molar ratio of NaCl/Al2O3 was kept at 1.5, the crystallization time reduced from 240â¯min to 150â¯min, and particle size distributions narrowed from 20-100⯵m to 1-10⯵m. The practical applications in removal of mixed heavy metal ions (Zn2+, Cu2+, Cd2+, Ni2+, and Pb2+) from wastewater indicated that the as-synthesized magnetic 4A-zeolite is a promising candidate for heavy metals adsorption.
RESUMEN
Spent mushroom substrate (SMS) is a bulky waste byproduct of commercial mushroom production, which can cause serious environmental problems and, therefore, poses a significant barrier to future expansion of the mushroom industry. In the present study, we explored the use of SMS as a biochar to improve the quality of bio-fertilizer. Specifically, we performed a series of experiments using composting reactors to investigate the effects of SMS biochar on the physio-chemical properties of bio-fertilizer. Biochar was derived from dry SMS pyrolysed at 500°C and mixed with pig manure and rice straw. Results from this study demonstrate that the addition of biochar significantly reduced electrical conductivity and loss of organic matter in compost material. Nutrient analysis revealed that the SMS-derived biochar is rich in fertilizer nutrients such as P, K, Na, and N. All of these findings suggest that SMS biochar could be an excellent medium for compost.
Asunto(s)
Agaricales , Carbón Orgánico , Estiércol , Oryza , Suelo , Animales , Conductividad Eléctrica , Fertilizantes/análisis , Nitrógeno/análisis , Fósforo/análisis , Potasio/análisis , Sodio/análisis , Suelo/química , Porcinos , ResiduosRESUMEN
This work describes an environmentally friendly method for pretreating rice straw by using 1-Allyl-3-methylimidazolium chloride ([AMIM]Cl) as an ionic liquid (IL) assisted by surfactants. The impacts of surfactant type (including nonionic-, anionic-, cationic- and bio-surfactant) on the ionic liquid pretreatment were investigated. The bio-surfactant+IL-pretreated rice straw showed significant lignin removal (26.14%) and exhibited higher cellulose conversion (36.21%) than the untreated (16.16%) rice straw. The cellulose conversion of the rice straw pretreated with bio-surfactant+IL was the highest and the lowest was observed for pretreated with cationic-surfactant+IL. Untreated and pretreated rice straw was thoroughly characterized through SEM and AFM. In conclusion, the results provided an effective and environmental method for pretreating lignocellulosic substrates by using green solvent (ionic liquid) and biodegradable bio-surfactant.
Asunto(s)
Líquidos Iónicos/química , Lignina/aislamiento & purificación , Oryza/química , Tensoactivos/química , Celulasa/química , Lignina/químicaRESUMEN
The aim of this work was to study an environmentally friendly method for pretreating rice straw by using 1-butyl-3-methylimidazolium chloride ([BMIM]Cl) as an ionic liquid (IL) assisted by surfactants. Different temperatures, reaction times, and surfactant concentrations were studied. Compared with [BMIM]Cl only pretreatment, the addition of 1% sodium dodecyl sulfate (SDS) and 1% cetyl trimethyl ammonium bromide (CTAB) increased lignin removal to 49.48% and 34.76%, respectively. Untreated and pretreated rice straw was thoroughly characterized through FTIR, XRD, and FE-SEM. Cellulose crystallinity and surface morphology of the rice straw were substantially altered after surfactant-assisted IL pretreatment. In conclusion, surfactant-assisted IL pretreatment is an effective method for producing fermentable sugars from lignocellulosic substrates.
Asunto(s)
Líquidos Iónicos/farmacología , Oryza/química , Tensoactivos/farmacología , Residuos , Metabolismo de los Hidratos de Carbono/efectos de los fármacos , Celulasa/química , Celulosa/química , Cristalización , Hidrólisis , Imidazoles/farmacología , Oryza/efectos de los fármacos , Oryza/ultraestructura , Espectroscopía Infrarroja por Transformada de Fourier , Temperatura , Difracción de Rayos XRESUMEN
A self-made anaerobic bio-filter bed which was inoculated with special sludge showed high efficiency in removing hexavalent chromium. When pump flow was 47 ml/min and COD(Cr) of wastewater was about 140 mg/L, it took 4 h to decrease the Cr6+ concentrations from about 60 mg/L to under 0.5 mg/L, compared with 14 h without carbon source addition. Cr6+ concentrations ranged from 64.66 mg/L to 75.53 mg/L, the system efficiency was excellent. When Cr6+ concentration reached 95.47 mg/L, the treatment time was prolonged to 7.5 h. Compared with the contrast system, the system with trace metals showed clear superiority in that the Cr6+ removal rate increased by 21.26%. Some analyses also showed that hexavalent chromium could probably be bio-reduced to trivalent chromium, and that as a result, the chrome hydroxide sediment was formed on the surface of microorganisms.
Asunto(s)
Bacterias Anaerobias/metabolismo , Reactores Biológicos/microbiología , Técnicas de Cultivo de Célula/métodos , Cromo/farmacocinética , Residuos Industriales/prevención & control , Aguas del Alcantarillado/microbiología , Purificación del Agua/métodos , Biodegradación Ambiental , Cromo/aislamiento & purificaciónRESUMEN
The effects of sulfur compounds on the migration of a semi-volatile heavy metal (cadmium) during sludge incineration were investigated with two methods, i.e., experiments in a tubular furnace reactor and thermodynamic equilibrium calculations. The representative typical sludge with and without the addition of sulfur compounds was incinerated at 850 °C. The partitioning of Cd among the solid phase (bottom ash) and gas phase (fly ash and flue gas) was quantified. The results indicate that sulfur compounds in the elemental form and a reduced state could stabilize Cd in the form of CdS, aluminosilicate minerals, and polymetallic sulfides, whereas sulfur in the oxidized forms slightly increases Cd volatilization during incineration. For Cd solidification points, the inhibition effect on the volatilization of Cd is as follows: S > Na2SO4 > Na2S. Chemical equilibrium calculations indicate that sulfur binds with Cd and alters Cd speciation at low temperatures (<950 K). Furthermore, SiO2- and Al2O3-containing minerals can function as sorbents stabilizing Cd as condensed phase solids (CdSiO4 and CdAl2O4) according to the results of equilibrium calculations. These findings provide useful information for understanding the partitioning of Cd and thus facilitate the development of strategies to control Cd volatilization during sludge incineration.
Asunto(s)
Cadmio/análisis , Aguas del Alcantarillado/química , Sulfuros/análisis , Ceniza del Carbón/análisis , Incineración , TermodinámicaRESUMEN
Experiments in a tubular furnace reactor and thermodynamic equilibrium calculations were conducted to investigate the impact of sulfur compounds on the migration of lead (Pb) during sludge incineration. Representative samples of typical sludge with and without the addition of sulfur compounds were combusted at 850 °C, and the partitioning of Pb in the solid phase (bottom ash) and gas phase (fly ash and flue gas) was quantified. The results indicate that three types of sulfur compounds (S, Na2S and Na2SO4) added to the sludge could facilitate the volatilization of Pb in the gas phase (fly ash and flue gas) into metal sulfates displacing its sulfides and some of its oxides. The effect of promoting Pb volatilization by adding Na2SO4 and Na2S was superior to that of the addition of S. In bottom ash, different metallic sulfides were found in the forms of lead sulfide, aluminosilicate minerals, and polymetallic-sulfides, which were minimally volatilized. The chemical equilibrium calculations indicated that sulfur stabilizes Pb in the form of PbSO4(s) at low temperatures (<1000 K). The equilibrium calculation prediction also suggested that SiO2, CaO, TiO2, and Al2O3 containing materials function as condensed phase solids in the temperature range of 800-1100 K as sorbents to stabilize Pb. However, in the presence of sulfur or chlorine or the co-existence of sulfur and chlorine, these sorbents were inactive. The effect of sulfur on Pb partitioning in the sludge incineration process mainly depended on the gas phase reaction, the surface reaction, the volatilization of products, and the concentration of Si, Ca and Al-containing compounds in the sludge. These findings provide useful information for understanding the partitioning behavior of Pb, facilitating the development of strategies to control the volatilization of Pb during sludge incineration.
Asunto(s)
Incineración , Plomo/química , Aguas del Alcantarillado/química , Azufre/química , Administración de Residuos , China , Ciudades , Ceniza del Carbón/análisis , Modelos Teóricos , Eliminación de Residuos , Compuestos de Azufre/química , Termodinámica , VolatilizaciónRESUMEN
The effects of organic chloride-PVC and inorganic chloride-NaCl on Cd partitioning during sludge incineration with adding Cd(CH3COO)2 . 2H2O to the real sludge were investigated using a simulated tubular incineration furnace. And transformation and distribution of Cd were studied in different sludge incineration operation conditions. The results indicated that the partitioning of Cd tended to be enhanced in the fly ash and fule gas as the chloride content increasing. The migration and transformation of Cd-added sludge affected by different chloride were not obvious with the increasing of chloride content. With increasing temperature, organic chloride (PVC) and inorganic chloride (NaC1) can reduce the Cd distribution in the bottom ash. However, the effect of chlorides, the initial concentration and incineration time on Cd emissions had no significant differences. Using SEM-EDS and XRD technique, different Cd compounds including CdCl2, Na2CdCl4, K2CdCl6, K2CdSiO4 and NaCdO2 were formed in the bottom ash and fly ash after adding NaCl to the sludge. In contrast, after adding PVC to the sludge, the Na2CdCl4 and CdCl2 were the main forms of Cd compounds, at the same time, K4CdCI6 and K6CdO4 were also formed. The two different mechanisms of chlorides effects on Cd partitioning were affected by the products of Cd compound types and forms.
Asunto(s)
Cadmio/química , Cloruros/química , Incineración , Eliminación de Residuos/métodos , Aguas del Alcantarillado/química , Ceniza del Carbón , TemperaturaRESUMEN
Experiments were carried out on laboratory-scale electrically heated tube furnace sewage sludge combustion with different adsorbents. Four solid adsorbents (calcium oxide, Alumina, fly ash and kaolin) were used to control the emission of heavy metals (Pb, Cd, Cu, Cr, Ni, Zn) during the sewage sludge incineration. The results showed that the heavy metals tended to be fixed and left over in the incineration bottom ash with the addition of calcium oxide, Alumina, fly ash and kaolin. With the increase of the solid adsorbent ratio, the residual rate of heavy metals in the bottom ash also increased. Incineration temperature had a great influence on the heavy metal adsorption effect of the solid adsorbent. The forms, melting point and boiling point of the heavy metals were found to be important factors that determined its volatility. There was huge difference in the inhibitory effect of different adsorbents on heavy metals migration. From the view of controlling heavy metal evaporation, the adsorbents kaolin and CaO were superior to the other adsorbents. The interaction between the active center of the solid adsorbent and the molecules of the heavy metal compounds depended on the distribution of these active sites and the chemical properties of the heavy metals.
Asunto(s)
Incineración , Metales Pesados/aislamiento & purificación , Eliminación de Residuos/métodos , Aguas del Alcantarillado/química , Adsorción , Óxido de Aluminio/química , Compuestos de Calcio/química , Caolín/química , Metales Pesados/análisis , Óxidos/química , Eliminación de Residuos Líquidos/métodosRESUMEN
Fly ash sample was collected from a MSW co-combustion with sewage sludge plant and the volatilization of heavy metals Pb, Cd, Cu and Zn was investigated before and after the water washing of fly ash, meanwhile, the influence of adding different sulphur compounds (S, NaS, Na2 SO3, Na2 SO4) on the volatilization of heavy metals was studied. The results showed that the contents of Zn, Pb and Mn were high, the Ni content was low and the Cd content reached 29.4 mg x kg(1). The contents of Pb, Cu, Zn increased, while that of Cd reduced in the fly ash after water washing. TG-DTG curves of fly ash showed highest weight loss in ranges of 579-732 degrees C and 949-1 200 degrees C, with 690 degrees C and 1 154 degrees C as the inflection point temperatures. The volatilization of different heavy metals showed great difference in the volatilization rate, following the order of Pb > Cd > Zn > Cu, in which the volatilization rate of Pb was more than 80% and that of Cu was less than 30%. After water washing, the volatilization of different heavy metals showed great difference in the volatilization rate, with the order of Zn > Pb > Cd > Cu, in which the volatilization rate of Zn was more than 20%. With the pretreatment of adding Na2 SO3 and Na2 SO4, the evaporation rates of heavy metals (Cu, Pb, Zn, Cd) were significantly decreased. After adding S, the evaporation rate of Zn was reduced, whereas the addition of Na2S reduced the evaporation rates of Cd and Zn. The evaporation rates of the four heavy metals were all reduced after adding Na2S in the washed fly ash. The evaporation rates of Cu and Zn were reduced with addition of S and Na2SO3 and the evaporation rate of Cd was reduced by adding the four sulfides. The results can provide a basis for the harmless disposal and maximized resource utilization and recycling of fly ash.
Asunto(s)
Ceniza del Carbón/química , Incineración , Metales Pesados/análisis , Eliminación de Residuos/métodos , Compuestos de Azufre/química , Contaminación Ambiental/prevención & control , Calor , Material Particulado , Aguas del Alcantarillado , VolatilizaciónRESUMEN
The volatilization of heavy metals Pb, Cd, Cu and Zn were studied at 900 degrees C and 1 000 degrees C with different residence time, meanwhile the influence of chlorination agents CaCl2, MgCl2, NaCl, FeCl3 and AlCl3 on heavy metals volatilization was studied. The results showed that the volatilization of heavy metals had great differences with the volatilization rate followed the order Pb > Cd > Zn > Cu, in which the volatilization rate of Pb was more than 80% and that of Cu was less than 30%. In the thermal disposal process, the volatilization rate influenced by temperature was greater than that by the residence time, and the volatile elements Pb and Cd were particularly evident in the volatilization. After adding chlorides in fly ash, the volatilization of heavy metals changed significantly, and the volatilization rate of the low volatile elements Cu and Zn increased significantly compared with Pb and Cd. With the content of chloride increasing, the volatilization rate of heavy metals increased, but different types of chloride compounds on heavy metal transformation were quite different, in which the promotion effect of NaCl on heavy metals Cd, Zn and Cu was less than that of other chlorinating agents. The results can provide strategies for the harmless disposal and maximize resource utilization and recycling of fly ash.
Asunto(s)
Ceniza del Carbón/química , Incineración , Metales Pesados/análisis , Eliminación de Residuos/métodos , China , Restauración y Remediación Ambiental/métodos , Halogenación , Calor , VolatilizaciónRESUMEN
In order to evaluate the function of sludge aerobic/anoxic digestibility by ultrasonic pretreatment. The SS, VSS and hydrolytic enzyme activities (amylase, glucosidase, protease, phosphatase) were measured before and after ultrasonic pretreatment (28 kHz, 0.15 kW x L(-1), 10 min). The results showed that the performances of aerobic/anoxic were greatly improved after ultrasonic pretreatment, the removal efficiency of VSS went to 44.3%, 7.8% better than of traditional aerobic/anoxic digestion. The variational trend of sludge hydrolytic enzyme activities increased firstly and then fell off during 13d digestion, the maximum of amylase activity and glucosidase activity in ultrasonic sludge, appeared in the 5 d, amylase activity was 0.104 micromol x g(-1) and glucosidase activity was 0.637 (micromol x g(-1). The maximum of intracellular protease activity and extracellular proteases activity in ultrasonic sludge, appeared in the 7 d, intracellular protease activity was 23.68 micromol x g(-1), higher than extracellular proteases activity, and it was playing a leading role in sludge digestion. The acid phosphatase activity of ultrasonic sludge was higher than the control sludge, and the alkaline phosphatase was sensitive to environment. So the alkaline phosphatase activity reduced when the internal properties of sludge was changed.
Asunto(s)
Aguas del Alcantarillado/química , Ultrasonido , Eliminación de Residuos Líquidos/métodos , Aerobiosis , Amilasas/metabolismo , Amilasas/efectos de la radiación , Anaerobiosis , Reactores Biológicos , Glucosidasas/metabolismo , Glucosidasas/efectos de la radiación , Hidrólisis , Péptido Hidrolasas/metabolismo , Péptido Hidrolasas/efectos de la radiación , Monoéster Fosfórico Hidrolasas/metabolismo , Monoéster Fosfórico Hidrolasas/efectos de la radiaciónRESUMEN
The microbial community structure of sludge aerobic/anoxic digestion after ultrasonic pretreatment was studied by PCR amplification and DGGE based on 16S rDNA. The genomic DNA of sludge at different stages was extracted with SDS cell lysate method. After purification of DNA, the 16S rDNA genes (V3 region) were amplified by using the universal primers (F357GC and R518). The results of agarose gel (1.5%) electrophoresis showed that the PCR products were about 190 bp in length. The amplified DNA fragments were separated by paralleled DGGE with the denaturant (urea and acrylamide) from 30% to 60%. The sequences were used for homology analysis and phylogenetic trees were constructed. The DGGE profiles showed that the change of microbial diversity was in correspondence to different periods. Compared with 0 d, the diversities of microorganisms were 61.2%, 48.2%, 46.4%, 42.6% and 41.7%, respectively after 5 d, 10 d, 15 d, 20 d, 25 d. Shannon density index of bacteria experienced a process from a gradual reduction to stable state. This suggested that ultrasonic pretreatment had a significant impact on bacterial community structures. Cluster analysis of DGGE by UPGMA (unweighted air group method, arithmetic mean) divided all lanes into three clusters, which corresponded to different periods during the whole experiment. The sequences indicated that Firmicute, Genuscitrobacter, Bacilli, alpha-Proteobacteria, beta-Proteobacteria were the predominant microbial populations in the process of sludge aerobic/anoxic digestion after ultrasonic pretreatment.