Exploring the Antioxidant and Anti-inflammatory effect of Rhoifolin Extracted from Teucrium polium in Rats' Lungs Exposed to Tobacco Smoke.

Cigarette smoking exacerbates respiratory diseases, while plant-derived polyphenols offer antioxidant and anti-inflammatory benefits. This study explores the effects of Rhoifolin (ROF), a polyphenol from Jordanian Teucrium polium, on lung health in rats exposed to tobacco smoke. Male rats were divided into two groups: one exposed to cigarette smoke (CS), and the other to ROF treatment alongside smoke exposure (ROF/CS). ROF was administered orally for 21 days before smoke exposure. Results showed smoke-induced lung inflammation and oxidative stress, mitigated by ROF treatment. Histological examination revealed smoke-related morphological changes in lung tissue. ROF treatment reduced oxidative stress and inflammation, as evidenced by decreased proinflammatory cytokines. In silico docking demonstrated ROF's potential as an inhibitor. This study suggests the therapeutic potential of ROF and similar polyphenols in mitigating the harmful effects of cigarette smoke on lung health.

Exhausted Grape Seed Residues as a Valuable Source of Antioxidant Molecules for the Formulation of Biocompatible Cosmetic Scrubs.

Grape seed of Obeidi, a white Lebanese autochthonous variety, was previously tested in different studies as a valuable source of bioactive molecules such as polyphenols, oils, and proteins by means of extraction procedures for the development of cosmetic and therapeutic products. However, an un-valorized, exhausted grape seed residue remains as "secondary waste" after the extraction processes. In this study, the exhausted seeds have been further exploited to produce cosmetic scrubs capable of releasing antioxidant molecules during the exfoliation process, in accordance with the principles of the circular economy and going toward a zero-waste process. The deep characterization of the exhausted seeds confirmed the presence of antioxidant phenolic molecules including gallic acid, catechins and protocatechuic acid (0.13, 0.126, and 0.089 mg/g of dry matter DM), and a high phenolic content (11.85 mg gallic acid equivalents (GAE)/g of dry matter (DM)). Moreover, these residues were shown to possess a sandy texture (Hausner ratio (HR): 1.154, Carr index (CI): 0.133, and angle of repose: 31.62 (°) degrees), similar to commercial natural exfoliants. In this respect, exhausted Obeidi grape seed residues were incorporated at increasing concentrations (0.5, 1, 1.5, and 2% w/w) in a cosmetic scrub, and stored for 5 weeks at 4, 25, and 50 °C for stability testing. All tested scrub formulations exhibited good spreadability with a spread diameter of 3.6-4.7 cm and excellent physical stability, as no phase separation or color change were observed after four cycles of heat shock at 4 and 50 °C. Finally, an in vivo skin irritation test showed that the scrub enriched with 1.5% of exhausted Obeidi grape seed residues was the most promising formulation, as it possessed a high amount of phenolic molecules (0.042 ± 0.001 mg GAE/mL of scrub) and good stability and could be safely applied to the skin with no irritation phenomena. Overall results underlined that exhausted grape seed residues can be transformed into promising systems for both physical and chemical exfoliation, thus confirming the importance of the effective exploitation of agro-industrial by-products for the development of high value cosmeceutics towards a more sustainable and zero-waste approach.

Encapsulation of morin in lipid core/PLGA shell nanoparticles significantly enhances its anti-inflammatory activity and oral bioavailability.

Morin (3,5,7,2',4'-pentahydroxyflavone; MR) is a bioactive plant polyphenol whose therapeutic efficacy is hindered by its poor biopharmaceutical properties. The purpose of this study was to develop a nanoparticle (NP) formulation to enhance the bioactivity and oral bioavailability of MR. The nanoprecipitation technique was employed to encapsulate MR in lipid-cored poly(lactide-co-glycolide) (PLGA) NPs. The optimal NPs were about 200 nm in size with an almost neutral surface charge and a loading efficiency of 82%. The NPs exhibited sustained release of MR within 24 h. In vitro antioxidant assays showed that MR encapsulation did not affect its antioxidant activity. On the other hand, anti-inflammatory assays in lipopolysaccharide-stimulated macrophages revealed a superior anti-inflammatory activity of MR NPs compared to free MR. Furthermore, oral administration of MR NPs to mice at a single dose of 20 mg/kg MR achieved a 5.6-fold enhancement in bioavailability and a prolongation of plasma half-life from 0.13 to 0.98 h. The results of this study present a promising NP formulation for MR which can enhance its oral bioavailability and bioactivity for the treatment of different diseases such as inflammation.

Design and Synthesis of Thionated Levofloxacin: Insights into a New Generation of Quinolones with Potential Therapeutic and Analytical Applications.

Levofloxacin is a widely used fluoroquinolone in several infectious diseases. The structure-activity relationship of levofloxacin has been studied. However, the effect of changing the carbonyl into thiocarbonyl of levofloxacin has not been investigated up to the date of this report. In this work, levofloxacin structure was slightly modified by making a thionated form (compound 3), which was investigated for its antibacterial activity, biocompatibility, and cytotoxicity, as well as spectroscopic properties. The antibacterial susceptibility testing against five different bacteria showed promising minimum inhibitory concentrations (MICs), particularly against B. spizizenii and E. coli, with an MIC value of 1.9 µM against both bacteria, and 7.8 µM against P. mirabilis. The molecular docking experiment showed similar binding interactions of both levofloxacin and compound 3 with the active site residues of topoisomerase IV. The biocompatibility and cytotoxicity results revealed that compound 3 was more biocompatible with normal cells and more cytotoxic against cancer cells, compared to levofloxacin. Interestingly, compound 3 also showed an excitation profile with a distinctive absorption peak at λmax 404 nm. Overall, our results suggest that the thionation of quinolones may provide a successful approach toward a new generation with enhanced pharmacokinetic and safety profiles and overall activity as potential antibacterial agents.

Chemical Evaluation, In Vitro and In Vivo Anticancer Activity of Lavandula angustifolia Grown in Jordan.

Lavandula angustifolia is the most widely cultivated Lavandula species for medicinal use. In this study, chemical and biological evaluation of L. angustifolia aqueous, methanol (MeOH), ethanol (EtOH), ethyl acetate (EtOAc), and chloroform (CHCl3) extracts were conducted. Phytochemically, the extracts' total phenol and flavonoid contents and their antioxidant potential were evaluated. Ethanol extract was analyzed by LC-MS. All extracts were screened in vitro for their antitumor potential using human breast cancer cell lines MCF-7 and MDA-MB-23. For the first time, the antiproliferative potential of the EtOH extract was tested in vivo using mice with induced breast cancer. Ethanol extract exhibited the best cytotoxicity and safety profile of the tested extracts, with IC50 values of 104.1 µg/mL on MCF-7 and 214.5 µg/mL on MDA-MB-231 cell lines, respectively. In vivo, this extract revealed a reduction in tumor size by 43.29% in the treated group, compared to an increase in the tumor growth by 58.9% in the control group. Moreover, undetected tumor was found in 12.5% of the sample size. In conclusion, this study provides novel insight and evidence on the antiproliferative efficacy of L. angustifolia ethanol extract against breast cancer with potent anti-oxidant potential.

Nature-Inspired Polymerization of Quercetin to Produce Antioxidant Nanoparticles with Controlled Size and Skin Tone-Matching Colors.

Plant polyphenols have received considerable attention in recent years due to their ability to undergo oxidation-triggered self-polymerization, forming biocompatible versatile coatings and templated nanoparticles (NPs) that can be leveraged for a variety of biomedical applications. Here we show for the first time that untemplated NPs can be conveniently synthesized from the abundant plant polyphenol quercetin (QCT) simply by incubation with an oxidizing agent in a universal organic solvent, followed by self-assembly upon gradual addition of water. The process yielded NPs of around 180-200 nm in size with a range of colors that resembled light to medium-brown skin tones. The NPs were characterized by UV-Vis, FT-IR, and 1H-NMR spectroscopy and by dynamic light scattering and transmission electron microscopy to understand their physicochemical properties. Antioxidant and cell viability assays were also conducted to demonstrate the NPs' free-radical scavenging activity and biocompatibility, altogether providing valuable insights into the structure and function of this emerging class of nanomaterials to guide future biomedical applications.

Correlation between the viscoelastic properties of the gel layer of swollen HPMC matrix tablets and their in vitro drug release.

Drug release from hydroxypropyl methylcellulose (HPMC) hydrophilic matrix tablets is controlled by drug diffusion through the gel layer of the matrix-forming polymer upon hydration, matrix erosion or combination of diffusion and erosion mechanisms. In this study, the relationship between viscoelastic properties of the gel layer of swollen intact matrix tablets and drug release was investigated. Two sets of quetiapine fumarate (QF) matrix tablets were prepared using the high viscosity grade HPMC K4M at low (70 mg/tablet) and high (170 mg/tablet) polymer concentrations. Viscoelastic studies using a controlled stress rheometer were performed on swollen matrices following hydration in the dissolution medium for predetermined time intervals. The gel layer of swollen tablets exhibited predominantly elastic behavior. Results from the in vitro release study showed that drug release was strongly influenced by the viscoelastic properties of the gel layer of K4M tablets, which was further corroborated by results from water uptake studies conducted on intact tablets. The results provide evidence that the viscoelastic properties of the gel layer can be exploited to guide the selection of an appropriate matrix-forming polymer, to better understand the rate of drug release from matrix tablets in vitro and to develop hydrophilic controlled-release formulations.

The effect of pH, buffer capacity and ionic strength on quetiapine fumarate release from matrix tablets prepared using two different polymeric blends.

The objective of this study was to investigate the effect of the different physiological parameters of the gastrointestinal (GI) fluid (pH, buffer capacity, and ionic strength) on the in vitro release of the weakly basic BCS class II drug quetiapine fumarate (QF) from two once-a-day matrix tablet formulations (F1 and F2) developed as potential generic equivalents to Seroquel® XR. F1 tablets were prepared using blends of high and low viscosity grades of hydroxypropyl methylcellulose (HPMC K4M and K100LV, respectively), while F2 tablets were prepared from HPMC K4M and PEGylated glyceryl behenate (Compritol® HD5 ATO). The two formulations attained release profiles of QF over 24 h similar to that of Seroquel® XR using the dissolution medium published by the Food and Drug Administration (FDA). A series of solubility and in vitro dissolution studies was then carried out using media that simulate the gastric and intestinal fluids and cover the physiological pH, buffer capacity and ionic strength range of the GIT. Solubility studies revealed that QF exhibits a typical weak base pH-dependent solubility profile and that the solubility of QF increases with increasing the buffer capacity and ionic strength of the media. The release profiles of QF from F1, F2 and Seroquel® XR tablets were found to be influenced by the pH, buffer capacity and ionic strength of the dissolution media to varying degrees. Results highlight the importance of studying the physiological variables along the GIT in designing controlled release formulations for more predictive in vitro-in vivo correlations.

Nanoemulsion-based gel formulation of diclofenac diethylamine: design, optimization, rheological behavior and in vitro diffusion studies.

Chronic oral administration of the non-steroidal anti-inflammatory drug, diclofenac diethylamine (DDEA), is often associated with gastrointestinal ulcers and bleeding. As an alternative to oral administration, a nanoemulsion-based gel (NE gel) formulation of DDEA was developed for topical administration. An optimized formulation for the o/w nanoemulsion of oil, surfactant and cosurfactant was selected based on nanoemulsion mean droplet size, clarity, stability, and flowability, and incorporated into the gelling agent Carbopol® 971P. Rheological studies of the DDEA NE gel were conducted and compared to those of conventional DDEA gel and emulgel. The three gels exhibited an elastic behavior, where G' dominated G″ at all frequencies, indicating the formation of strong gels. NE gel exhibited higher G' values than conventional gel and emulgel, which indicated the formation of a stronger gel network. Strat-M® membrane, a synthetic membrane with diffusion characteristics that are well correlated to human skin, was used for the in vitro diffusion studies. The release of DDEA from conventional gel, emulgel and NE gel showed a controlled release pattern over 12 h, which was consistent with the rheological properties of the gels. DDEA release kinetics from the three gels followed super case II transport as fitted by Korsmeyer-Peppas model.

pH-Dependent Solubility and Dissolution Behavior of Carvedilol--Case Example of a Weakly Basic BCS Class II Drug.

The objective of this study was to investigate the pH-dependent solubility and dissolution of weakly basic Biopharmaceutical Classification Systems (BCS) class II drugs, characterized by low solubility and high permeability, using carvedilol, a weak base with a pK a value of 7.8, as a model drug. A series of solubility and in vitro dissolution studies was carried out using media that simulate the gastric and intestinal fluids and cover the physiological pH range of the GI from 1.2 to 7.8. The effect of ionic strength, buffer capacity, and buffer species of the dissolution media on the solubility and dissolution behavior of carvedilol was also investigated. The study revealed that carvedilol exhibited a typical weak base pH-dependent solubility profile with a high solubility at low pH (545.1-2591.4 µg/mL within the pH range 1.2-5.0) and low solubility at high pH (5.8-51.9 µg/mL within the pH range 6.5-7.8). The dissolution behavior of carvedilol was consistent with the solubility results, where carvedilol release was complete (95.8-98.2% released within 60 min) in media simulating the gastric fluid (pH 1.2-5.0) and relatively low (15.9-86.2% released within 240 min) in media simulating the intestinal fluid (pH 6.5-7.8). It was found that the buffer species of the dissolution media may influence the solubility and consequently the percentage of carvedilol released by forming carvedilol salts of varying solubilities. Carvedilol solubility and dissolution decreased with increasing ionic strength, while lowering the buffer capacity resulted in a decrease in carvedilol solubility and dissolution rate.

The cyclic peptide ecumicin targeting ClpC1 is active against Mycobacterium tuberculosis in vivo.

Drug-resistant tuberculosis (TB) has lent urgency to finding new drug leads with novel modes of action. A high-throughput screening campaign of >65,000 actinomycete extracts for inhibition of Mycobacterium tuberculosis viability identified ecumicin, a macrocyclic tridecapeptide that exerts potent, selective bactericidal activity against M. tuberculosis in vitro, including nonreplicating cells. Ecumicin retains activity against isolated multiple-drug-resistant (MDR) and extensively drug-resistant (XDR) strains of M. tuberculosis. The subcutaneous administration to mice of ecumicin in a micellar formulation at 20 mg/kg body weight resulted in plasma and lung exposures exceeding the MIC. Complete inhibition of M. tuberculosis growth in the lungs of mice was achieved following 12 doses at 20 or 32 mg/kg. Genome mining of lab-generated, spontaneous ecumicin-resistant M. tuberculosis strains identified the ClpC1 ATPase complex as the putative target, and this was confirmed by a drug affinity response test. ClpC1 functions in protein breakdown with the ClpP1P2 protease complex. Ecumicin markedly enhanced the ATPase activity of wild-type (WT) ClpC1 but prevented activation of proteolysis by ClpC1. Less stimulation was observed with ClpC1 from ecumicin-resistant mutants. Thus, ClpC1 is a valid drug target against M. tuberculosis, and ecumicin may serve as a lead compound for anti-TB drug development.

A Glucose Oxidase-Curcumin Composite Nanoreactor for Multimodal Synergistic Cancer Therapy.

Glucose oxidase (GOx) selectively oxidizes ß-d-glucose into gluconic acid and hydrogen peroxide; thus, it has emerged as a promising anticancer agent by tumor starvation and oxidative therapy. Here, we developed a nanoscale platform or "nanoreactor" that incorporates GOx and the bioactive natural product curcumin (CUR) to achieve a multimodal anticancer nanocomposite. The composite nanoreactor was formed by loading CUR in biodegradable polymeric nanoparticles (NPs) of poly(ethylene glycol)-b-poly(ε-caprolactone) (PEG-PCL). Prime-coating of the NPs with an iron(III)-tannic acid complex enabled facile immobilization of GOx on the NP surface. The NPs were monodisperse with a hydrodynamic diameter of 122 nm and a partially negative surface charge. The NPs were also associated with an excellent CUR loading efficiency and sustained release up to 96 h, which was accelerated by surface-immobilized GOx and followed supercase II transport. Viability assays were conducted on two model cancer cell lines, MCF-7 and MDA-MB-231 cells, as well as human dermal fibroblasts as a representative normal cell line. The assays revealed significantly improved potency of CUR in the composite nanoreactor, with up to 6000- and 1280-fold increase in MCF-7 and MDA-MB-231 cells, respectively, and lower toxicity toward normal cells. The NPs were also able to promote intracellular reactive oxygen species (ROS) generation and dissipation of the mitochondrial membrane potential, providing important clues on the mechanism of action of the nanoreactor. Further investigation of caspase-3 activity revealed that the nanoreactor had no effect or inhibited caspase-3 levels, signifying a caspase-independent mechanism of inducing apoptosis. Our findings present a promising nanocarrier platform that combines therapeutic agents with distinct mechanisms of action acting in synergy for more effective cancer therapy.

Development of Mitoxantrone-Loaded Quercetin Nanoparticles for Breast Cancer Therapy with Potential for Synergism with Bioactive Natural Products.

Nanoparticle (NP)-based drug delivery systems have caused a paradigm shift in cancer treatment by enabling drug targeting, sustaining drug release, and reducing systemic toxicity of chemotherapy. Here we developed a novel NP formulation for the anticancer drug mitoxantrone (MTZ) by loading it into an emerging nanomaterial derived from the plant polyphenol quercetin (QCT). QCT was partially oxidized to produce amphiphilic oxQCT which was co-assembled with poly(ethylene glycol) (PEG) and MTZ by nanoprecipitation to form MTZ NPs. The optimal NPs exhibited an average diameter of 128 nm, a polydispersity index of 0.22, and a drug loading efficiency of 76%. While only a small fraction of the loaded drug was released at physiologic pH, a significantly higher fraction was released at acidic pH. The anticancer activity of MTZ NPs was assessed in MCF-7 and MDA-MB-231 breast cancer cell lines, alone and in combination with the bioactive natural products curcumin (CUR) and thymoquinone (TQ). In cell viability assays, MTZ NPs were slightly less potent than free MTZ, most likely due to their sustained release properties, but their cytotoxicity was greatly enhanced in the presence of TQ (in MCF-7 cells) as well as CUR (in MDA-MB-231 cells). The results were corroborated by apoptosis assays such as mitochondrial membrane potential measurement, acridine orange/ethidium bromide staining, in addition to caspase activity assays. The assays revealed that the NPs' proapoptotic effect was enhanced in the presence of CUR or TQ, depending on the cell line. Our work presents a promising nanocarrier platform for MTZ with the potential to enhance its bioactivity against breast cancer when combined with bioactive natural products.

Green Tea Polyphenol Nanoparticles Reduce Anxiety Caused by Tobacco Smoking Withdrawal in Rats by Suppressing Neuroinflammation.

Repeated exposure to tobacco smoke causes neuroinflammation and neuroplasticity, which correlates with smoking withdrawal-induced anxiety. The purpose of this study was to investigate the anticipated involvement of antioxidant-rich nanoparticles (NPs) prepared by oxidation-triggered polymerization of green tea catechins in impacting these effects in a rat model of tobacco smoke exposure. Exposure to tobacco smoke was carried out for 2 h a day, 5 days a week, for a total of 36 days. Weekly behavioral tests were conducted prior to recommencing the exposure. Following a 20-day exposure period, rats were administered either distilled water or green tea (GT) NPs (20 mg/kg, orally) for an additional 16 days. Our findings revealed that tobacco smoke exposure induced anxiety-like behavior indicative of withdrawal, and this effect was alleviated by GT NPs. Tobacco smoke exposure caused a marked increase in the relative mRNA and protein expression of nuclear factor-kappa B (NF-κB) and reduced the relative mRNA and protein expression of brain-derived neurotrophic factor (BDNF) in the hippocampus (HIP) and hypothalamus (HYP) brain subregions. The intervention of GT NPs effectively inhibited these effects. Our findings demonstrate the potent protective role of GT NPs in reducing withdrawal-induced anxiety-like behavior, neuroinflammation, and neuroplasticity triggered by tobacco smoke exposure.

Sex Differences in Withdrawal-Induced Anxiety in Rats After Exposure to Tobacco Smoke.

Nicotine, a component of cigarettes, possesses strong reinforcing properties and improves cognitive function, which can lead to dependence. Upon cigarette smoking cessation, withdrawal symptoms occur and may cause an individual to relapse. Affective withdrawal symptoms, such as anxiety, is of great concern as studies have shown its ability to cause relapse in men and women. In this in vivo study, anxiety resulting from smoking cessation after 2-day smoke-free intervals per week for the duration of 4 weeks was investigated in 8 male and 8 female rats after their exposure to cigarette smoke compared to unexposed control rats (8 males and 8 female rats). The anxiety in rats during smoke-free intervals was investigated using an elevated plus-maze (EPM), open-field (OF), and light/dark test (LD). In all tests male rats exhibited significantly higher anxiety symptoms compared to female rats during nicotine withdrawal, despite control rats showing no differences. In the EPM, male rats spent less time in open arm as well having as lower number of crossings than female rats. As for the OFT, the amount of time spent in the center of the open field was also lower in male rats than female rats. In the LD test, the time spent in the light chamber and the latency (delay) to enter the dark chamber was lower in male rats compared to female rats. Our study showed that male rats show greater nicotine withdrawal effects, in terms of anxiety-like behavior than female rats.

Nanoencapsulated Curcumin Mitigates Liver Injury and Drug-Metabolizing Enzymes Induction in Diclofenac-Treated Mice.

Curcumin (CUR) is a natural product with known anti-inflammatory, antioxidant, and hepatoprotective properties. The aim of this study was to formulate CUR into a polymeric nanoparticle (NP) formulation and examine its potential hepatoprotective activity in an animal model of diclofenac (DIC)-induced hepatotoxicity. CUR was loaded into polymeric NPs composed of poly(ethylene glycol)-polycaprolactone (PEG-PCL). The optimal CUR NPs were evaluated against DIC-induced hepatotoxicity in mice, by studying the histopathological changes and gene expression of drug-metabolizing cyp450 (cyp2c29 and cyp2d9) and ugt (ugt2b1) genes in the livers of the animals. The optimal NPs were around 67 nm in diameter with more than 80% loading efficiency and sustained release. Histological findings of mice livers revealed that CUR NPs exhibited a superior hepatoprotective effect compared to free CUR, and both groups reduced DIC-mediated liver tissue injury. While treatment with DIC alone or with CUR and CUR NPs had no effect on cyp2c29 gene expression, cyp2d9 and ugt2b1 genes were upregulated in the DIC-treated group, and this effect was reversed by CUR both as a free drug and as CUR NPs. Our findings present a promising application for nanoencapsulated CUR in the treatment of nonsteroidal anti-inflammatory drugs-induced liver injury and the associated dysregulation in the expression of hepatic drug-metabolizing enzymes.

Lipid- and Polymer-Based Nanocarrier Platforms for Cancer Vaccine Delivery.

Cancer immunotherapy has gained popularity in recent years in the search for effective treatment modalities for various malignancies, particularly those that are resistant to conventional chemo- and radiation therapy. Cancer vaccines target the cancer-immunity cycle by boosting the patient's own immune system to recognize and kill cancer cells, thus serving as both preventative and curative therapeutic tools. Among the different types of cancer vaccines, those based on nanotechnology have shown great promise in advancing the field of cancer immunotherapy. Lipid-based nanoparticles (NPs) have become the most advanced platforms for cancer vaccine delivery, but polymer-based NPs have also received considerable interest. This Review aims to provide an overview of the nanotechnology-enabled cancer vaccine landscape, focusing on recent advances in lipid- and polymer-based nanovaccines and their hybrid structures and discussing the challenges against the clinical translation of these important nanomedicines.

A Hydrogen-Bonded Organic Framework Equipped with a Molecular Nanovalve.

The concept of a molecular nanovalve is applied to a synthesized biocompatible hydrogen-bonded organic framework (HOF), termed RSS-140, to load, trap, and subsequently release an antioxidant on command. Specifically, we exploit the pore windows of RSS-140 (i.e., ß-CD cavities) to first load and trap the antioxidant, Trolox, within the internal pores of the HOF (Trolox⊂RSS-140) and, to prevent it from leaching, utilize supramolecular chemistry to complex azobenzene (Azo) with ß-CD (Trolox⊂Azo@RSS-140). The molecular nanovalve is fully realized upon exposing Trolox⊂Azo@RSS-140 to UV light with a specific wavelength, which induces Azo isomerization, Azo decomplexation from ß-CD, and subsequent release of Trolox from the pores of RSS-140. The biocompatibility and nontoxicity of Trolox⊂Azo@RSS-140, together with the absolute control over the nanovalve opening, were established to yield a system that safely and slowly releases Trolox for longer-lasting antioxidant efficacy. As the field of supramolecular chemistry is rich with similar systems and many such systems can be used as building blocks to construct HOFs or other extended framework materials, we envision the molecular nanovalve concept to be applied widely for controllably delivering molecular cargo for diverse applications.

In vitro evaluation of dendrimer-polymer hybrid nanoparticles on their controlled cellular targeting kinetics.

Although polymeric nanoparticles (NPs) and dendrimers represent some of the most promising cancer-targeting nanocarriers, each of them has drawbacks such as limited tissue diffusivity/tumor penetration and rapid in vivo elimination, respectively. To address these issues, we have designed a multiscale hybrid NP system (nanohybrid) that combines folate (FA)-targeted poly(amidoamine) dendrimers and poly(ethylene glycol)-b-poly(d,l-lactide) NPs. The nanohybrids (∼100 nm NPs encapsulating ∼5 nm targeted dendrimers) were extensively characterized through a series of in vitro experiments that validate the design rationale of the system, in an aim to simulate their in vivo behaviors. Cellular uptake studies using FA receptor (FR)-overexpressing KB cells (KB FR(+)) revealed that the nanohybrids maintained high FR selectivity resembling the selectivity of free dendrimers, while displaying temporally controlled cellular interactions due to the presence of the polymeric NP shells. The cellular interactions of the nanohybrids were clathrin-dependent (characteristic of polymer NPs) at early incubation time points (4 h), which were partially converted to caveolae-mediated internalization (characteristic of FA-targeted dendrimers) at longer incubation hours (24 h). Simulated penetration assays using multicellular tumor spheroids of KB FR(+) cells also revealed that the targeted dendrimers penetrated deep into the spheroids upon their release from the nanohybrids, whereas the NP shell did not. Additionally, methotrexate-containing systems showed the selective, controlled cytotoxicity kinetics of the nanohybrids. These results all demonstrate that our nanohybrids successfully integrate the unique characteristics of dendrimers (effective targeting and penetration) and polymeric NPs (controlled release and suitable size for long circulation) in a kinetically controlled manner.

Sustained release of matrix metalloproteinase-3 to trabecular meshwork cells using biodegradable PLGA microparticles.

Accumulation of extracellular matrix (ECM) materials in the trabecular meshwork (TM) is believed to be a contributing factor to intraocular pressure (IOP) elevation, a risk factor/cause of primary open angle glaucoma, a major blinding disease. Matrix metalloproteinase-3 (MMP-3) is one of the proteinases that can effectively degrade ECM elements such as fibronectin, and MMP-3 delivery to the TM represents a promising approach for IOP reduction and treatment of glaucoma. In this study, we tested the feasibility of using polymeric microparticles to achieve a slow and sustained release of active MMP-3 to cultured human TM cells. ß-Casein, with molecular weight (24 kDa) and hydrophobicity similar to those of the active MMP-3 fragment (19.2 kDa), was first employed as a model for initial testing. ß-casein was encapsulated into poly(lactic-co-glycolic acid) (PLGA) microparticles using a double emulsion procedure at an encapsulation efficiency of approximately 45%. The PLGA microparticles were chosen given their biocompatibility and the proven capacity of sustained release of encapsulated molecules. The release test conducted in the culture medium showed a slow and sustained release of the protein over 20 days without a significant initial burst release. Active MMP-3 was subsequently encapsulated into PLGA microparticles with an encapsulation efficiency of approximately 50%. A biofunctional assay utilizing human TM cells was set up in which the reduction of fibronectin was used as an indicator of enzyme activity. It was observed that fibronectin staining was markedly reduced by the medium collected from MMP-3-microparticle-treated cultures compared to that from blank- and ß-casein-microparticle controls, which was validated using a direct MMP-3 activity assay. The controlled release of MMP-3 from the microparticles resulted in sustained degradation of fibronectin up to 10 days. This proof-of-concept undertaking represents the first study on the controlled and sustained release of active MMP-3 to TM cells via encapsulation into PLGA microparticles as a potential treatment of glaucoma.