A silica sol-gel design strategy for nanostructured metallic materials.

Batteries, fuel cells and solar cells, among many other high-current-density devices, could benefit from the precise meso- to macroscopic structure control afforded by the silica sol-gel process. The porous materials made by silica sol-gel chemistry are typically insulators, however, which has restricted their application. Here we present a simple, yet highly versatile silica sol-gel process built around a multifunctional sol-gel precursor that is derived from the following: amino acids, hydroxy acids or peptides; a silicon alkoxide; and a metal acetate. This approach allows a wide range of biological functionalities and metals--including noble metals--to be combined into a library of sol-gel materials with a high degree of control over composition and structure. We demonstrate that the sol-gel process based on these precursors is compatible with block-copolymer self-assembly, colloidal crystal templating and the Stöber process. As a result of the exceptionally high metal content, these materials can be thermally processed to make porous nanocomposites with metallic percolation networks that have an electrical conductivity of over 1,000 S cm(-1). This improves the electrical conductivity of porous silica sol-gel nanocomposites by three orders of magnitude over existing approaches, opening applications to high-current-density devices.

Plasmonic dye-sensitized solar cells using core-shell metal-insulator nanoparticles.

We present an investigation into incorporating core-shell Au-SiO(2) nanoparticles into dye-sensitized solar cells. We demonstrate plasmon-enhanced light absorption, photocurrent, and efficiency for both iodide/triiodide electrolyte based and solid-state dye-sensitized solar cells. Our spectroscopic investigation indicates that plasmon-enhanced photocarrier generation competes well with plasmons oscillation damping with in the first tens of femtoseconds following light absorption.

One-Pot Synthesis of Aminated Bimodal Mesoporous Silica Nanoparticles as Silver-Embedded Antibacterial Nanocarriers and CO2 Capture Sorbents.

Mesoporous silica nanoparticles have highly versatile structural properties that are suitable for a plethora of applications including catalysis, separation, and nanotherapeutics. We report a one-pot synthesis strategy that generates bimodal mesoporous silica nanoparticles via coassembly of a structure-directing Gemini surfactant (C16-3-16) with a tetraethoxysilane/(3-aminopropyl)triethoxysilane-derived sol additive. Synthesis temperature enables control of the nanoparticle shape, structure, and mesopore architecture. Variations of the aminosilane/alkylsilane molar ratio further enable programmable adjustments of hollow to core-shell and dense nanoparticle morphologies, bimodal pore sizes, and surface chemistries. The resulting Gemini-directed aminated mesoporous silica nanoparticles have excellent carbon dioxide adsorption capacities and antimicrobial properties against Escherichia coli. Our results provide an enhanced understanding of the structure formation of multiscale mesoporous inorganic materials that are desirable for numerous applications such as carbon sequestration, water remediation, and biomedical-related applications.

Highly aminated mesoporous silica nanoparticles with cubic pore structure.

Mesoporous silica with cubic symmetry has attracted interest from researchers for some time. Here, we present the room temperature synthesis of mesoporous silica nanoparticles possessing cubic Pm3n symmetry with very high molar ratios (>50%) of 3-aminopropyl triethoxysilane. The synthesis is robust allowing, for example, co-condensation of organic dyes without loss of structure. By means of pore expander molecules, the pore size can be enlarged from 2.7 to 5 nm, while particle size decreases. Adding pore expander and co-condensing fluorescent dyes in the same synthesis reduces average particle size further down to 100 nm. After PEGylation, such fluorescent aminated mesoporous silica nanoparticles are spontaneously taken up by cells as demonstrated by fluorescence microscopy.

Facile Control of Structured ZnO Polymeric Nanoparticles through Miniemulsion Polymerization: Kinetic and UV Shielding Effects.

Zinc oxide polymeric nanoparticles (ZPPs) of poly (styrene-co-acrylic acid) P(St/AA), containing oleic acid modified zinc oxide nanoparticles (OA-ZnO NPs), were synthesized via miniemulsion polymerization. By simply adjusting the quantity of reactants, i.e., sodium dodecyl sulfate (SDS) surfactant, potassium persulfate (KPS) initiator, and divinyl benzene (DVB) crosslinking agent, the location of ZnO NPs were altered from the inner (core) to the outer (shell), leading to core-shell and Pickering-like morphologies, respectively. The Pickering-like ZPPs were obtained when using SDS at below or equal to the critical micelle concentration (CMC). At above the CMC, the complete encapsulation of OA-ZnO NPs within the ZPPs depicted a kinetically controlled morphology. The transition to Pickering-like ZPPs also occurred when reducing the KPS from 2 to 0.5-1%. Whereas the DVB accelerated the polymerization rate and viscosity in the growing monomer-swollen nanodroplets and, hence, contributed to kinetic parameters on particle morphology, i.e., an increase in the DVB content increased the rate of polymerization. A hollow structure was obtained by replacing styrene with the more hydrophilic monomer, i.e., methyl methacrylate. All ZPPs-incorporated poly (vinyl alcohol) (PVA) films greatly improved shielding performance over the UV region and were relatively transparent on a white paper background. Due to the large number of ZnO NPs in the central region and, hence, the ease of electron transfer, composite films containing core-shell ZPPs possessed the highest UV blocking ability. ZnO NPs in the outer part of the hollow and Pickering-like ZPPs, on the other hand, facilitated the multiple light scattering according to the difference of refractive indices between the inorganic shell and organic/air core. These results confirm the advantage of structured ZPPs and their potential use as transparent UV shielding fillers.

Combined effects of double mutations on catalytic activity and structural stability contribute to clinical manifestations of glucose-6-phosphate dehydrogenase deficiency.

Glucose-6-phosphate dehydrogenase (G6PD) deficiency is the most common enzymopathy in humans, affecting ~ 500 million worldwide. A detailed study of the structural stability and catalytic activity of G6PD variants is required to understand how different mutations cause varying degrees of enzyme deficiency, reflecting the response of G6PD variants to oxidative stress. Furthermore, for G6PD double variants, investigating how two mutations jointly cause severe enzyme deficiency is important. Here, we characterized the functional and structural properties of nine G6PD variants: G6PD Gaohe, G6PD Mahidol, G6PD Shoklo, G6PD Canton, G6PD Kaiping, G6PD Gaohe + Kaiping, G6PD Mahidol + Canton, G6PD Mahidol + Kaiping and G6PD Canton + Kaiping. All variants were less catalytically active and structurally stable than the wild type enzyme, with G6PD double mutations having a greater impact than single mutations. G6PD Shoklo and G6PD Canton + Kaiping were the least catalytically active single and double variants, respectively. The combined effects of two mutations were observed, with the Canton mutation reducing structural stability and the Kaiping mutation increasing it in the double mutations. Severe enzyme deficiency in the double mutants was mainly determined by the trade-off between protein stability and catalytic activity. Additionally, it was demonstrated that AG1, a G6PD activator, only marginally increased G6PD enzymatic activity and stability.

Controlled reversible assembly of gold nanoparticles as a new colorimetric and sensitive detection of glucose-6-phosphate dehydrogenase deficiency.

Recently, several studies have examined possible applications of nanoparticles for the development of electronic and optical sensors. The plasmon absorbance of gold nanoparticles has been used extensively to study biomolecular processes, including nicotinamide adenine dinucleotide/nicotinamide adenine dinucleotide phosphate-dependent enzymatic reactions. In this report, we describe the development of gold nanoparticles as a new colorimetric and sensitive detection method of glucose-6-phosphate dehydrogenase deficiency by means of controlled reversible assembly of gold nanoparticles. 3-nm polyvinylpyrrolidone/N,N'-dimethylaminopyridine-stabilized gold nanoparticles were synthesized, characterized and applied for an in vitro activity assay of 11 recombinant human glucose-6-phosphate dehydrogenase variants. Differences in the activity of the glucose-6-phosphate dehydrogenase variants from different deficiency classes were readily detected using the synthesized gold nanoparticles. The developed method can be easily distinguished with color change by naked eye for the detection of glucose-6-phosphate dehydrogenase deficiency. Moreover, we are the first to propose the segregation mechanism of polyvinylpyrrolidone/N,N'-dimethylaminopyridine-stabilized gold nanoparticles by reduced nicotinamide adenine dinucleotide phosphate. The method enables visual detection of glucose-6-phosphate dehydrogenase deficiency, which could be further developed for diagnostic testing of glucose-6-phosphate dehydrogenase deficiency.

PMMA particles coated with chitosan-silver nanoparticles as a dual antibacterial modifier for natural rubber latex films.

The antibacterial activity in sulphur prevulcanized natural rubber (SPNR) latex film was effectively improved by deposition of poly(methyl methacrylate) (PMMA) particles encircled with chitosan-coated silver nanoparticles (AgNPs-CS). With the focus on a green process, CS was selected as a safe reducing and stabilizing agent for the one-step synthesis of AgNPs-CS (38 nm, +40.4 mV) in an autoclave. The adsorption of small-sized AgNPs-CS directly onto rubber film did not provide an inhibitory effect on S. aureus. It also had a low antibacterial effect on E. coli. This is because of the particles becoming completely/partially submerged into the soft rubber matrix upon drying. Hence, the AgNPs-CS were fabricated as a shell surrounding a rigid PMMA core (496 nm, -30.9 mV). This was done using a heterocoagulation technique prior to coating on SPNR film. The presence of PMMA/AgNPs-CS on the surface of SPNR film effectively increased the surface roughness from ca. 44 to 150 nm. This substantially promoted the antibacterial activity against E. coli and S. aureus by way of contact killing and repelling mechanisms. The cytotoxicity on L-929 fibroblasts was also suppressed. This study would be, therefore, applicable to the development of antibacterial SPNR film with high surface roughness, low cytotoxicity. It could also be applied for other soft substrates.

One-pot, large-scale green synthesis of silver nanoparticles-chitosan with enhanced antibacterial activity and low cytotoxicity.

Silver nanoparticles stabilized with chitosan (AgNPs-CS) were synthesized based on the one-pot green process in an autoclave, in which CS acts as reducing agent as well as stabilizer. Effects related to temperature and pressure input on particle formation were systematically investigated. Mechanism taking place during particle nucleation and growth was proposed. The data from UV-vis absorption, X-ray diffraction pattern and morphology confirmed the formation of AgNPs-CS with face-centered cubic (fcc) structure. The synthesized AgNPs-CS showed the effective antibacterial activity against both E. coli and S. aureus. The minimum bactericidal concentration values of 39.1 and 312.5 µg/ml for E. coli and S. aureus, respectively, did not show cytotoxicity to L-929 fibroblast. Moreover, the covering of CS on the surface of AgNPs-CS was proven to reduce the cytotoxicity when compared with commercial citrate-stabilized AgNPs. Considering simple and mild process, this synthesis approach would be helpful for development of benign AgNPs-based antibacterial agent.

Enhanced antibacterial activity of NR latex gloves with raspberry-like PMMA-N,N,N-trimethyl chitosan particles.

Raspberry-like poly(methyl methacrylate) (PMMA) latex particles stabilized with silica nanoparticles (SiNPs) were prepared via the Pickering emulsion polymerization for use as substrate of N,N,N-trimethyl chitosan (TMC) adsorption. With the aims to simultaneously reduce the surface friction and improve the antibacterial activity of rubber gloves, the synthesized PMMA-SiNPs(TMC) particles were electrostatically deposited onto a sulphur prevulcanized natural rubber (SPNR) latex film. From SEM and AFM analyses, the results showed the highest surface coverage of PMMA-SiNPs(TMC) particles on the surface of SPNR film of 41% and the surface roughness of 69nm. The coated SPNR film exhibited effective antibacterial activity especially against S. aureus. Therefore, this investigation would be useful for fabrication of special gloves with antibacterial properties.

PMMA-N,N,N-trimethyl chitosan nanoparticles for fabrication of antibacterial natural rubber latex gloves.

This paper presents one-pot synthesis of N,N,N-trimethyl chitosan (TMC) stabilized poly(methyl methacrylate) (PMMA) latex particles via the miniemulsion polymerization technique. From (1)H NMR, synthesized TMC contains 52% degree of quaternization. Compared to native biopolymer chitosan, TMC possesses permanently positive charges as well as provides greater antibacterial activity. Combining properties of PMMA and TMC, PMMA-TMC latex nanoparticles (hydrodynamic size ≈282 nm) could be used in place of inorganic lubricating powder in fabrication of latex gloves at pH ≥ 7. After immersing sulphur prevulcanized natural rubber (SPNR) film into 3 wt% of PMMA-TMC latex at pH 7, significant amount of nanoparticles uniformly deposited onto SPNR film was observed under SEM. A number of nanoparticles present on film surface would increase surface roughness of the rubber film and potentially inhibit the bacterial (Escherichia coli and Staphylococcus aureus) growth, which would be useful for fabrication of special gloves with antibacterial property.

Multicompartment mesoporous silica nanoparticles with branched shapes: an epitaxial growth mechanism.

Mesoporous nanomaterials have attracted widespread interest because of their structural versatility for applications including catalysis, separation, and nanomedicine. We report a one-pot synthesis method for a class of mesoporous silica nanoparticles (MSNs) containing both cubic and hexagonally structured compartments within one particle. These multicompartment MSNs (mc-MSNs) consist of a core with cage-like cubic mesoporous morphology and up to four branches with hexagonally packed cylindrical mesopores epitaxially growing out of the cubic core vertices. The extent of cylindrical mesostructure growth can be controlled via a single additive in the synthesis. Results suggest a path toward high levels of architectural complexity in locally amorphous, mesostructured nanoparticles, which could enable tuning of different pore environments of the same particle for specific chemistries in catalysis or drug delivery.