RESUMEN
The systematic study of two ionic porous organic polymers (iPOPs) based on viologens and their first applications in the electrochromic field are reported. The viologen-based iPOPs are synthesized by electrochemical polymerization with cyano groups, providing a simple and controllable method for iPOPs that solves the film preparation problems common to viologens. After the characterization of these iPOPs, a detailed study of their electrochromic properties is conducted. The iPOP films based on viologens structure exhibit excellent electrochromic properties. In addition, the resulting iPOP films show high sensitivity to electrolyte ions of different sizes in the redox process. Electrochemical and electrochromic data of the iPOPs explain this phenomenon in detail. These results demonstrate that iPOPs of this type are ideal candidates as electrochromic materials due to their inherent porous structures and ion-rich properties.
Asunto(s)
Técnicas Electroquímicas , Polímeros , Viológenos , Polímeros/química , Polímeros/síntesis química , Porosidad , Viológenos/química , Estructura Molecular , Iones/química , Propiedades de Superficie , Polimerizacion , Oxidación-ReducciónRESUMEN
Cu (II) protoporphyrin Cu-PP-IX and chlorin Cu-C-e6 were found to have both thin solid film formation and charge carrier transport abilities. In the layers deposited by resistive thermal evaporation, the mobilities of holes and electrons are on the order of 10-5 cm2 V-1 s-1. Organic light-emitting diodes incorporating the dye molecules as emitting dopants demonstrate electroluminescence in the UV and near-IR ranges.
Asunto(s)
Porfirinas , Protoporfirinas , Cobre , ElectronesRESUMEN
A one-step protocol for interfacial self-assembly of graphene oxide (GO), glutamine-substituted perylene diimide (PDI-glu), 10,12-pentacosadiynoic acid (PCDA), and zinc acetate into three- and four-component hybrid nanofilms through hydrogen and coordination bonding was developed. The hybrids deposited onto solid supports were studied after polymerization of PCDA by UV-vis absorption, fluorescence, and Raman spectroscopies, scanning electron microscopy (SEM), and atomic force microscopy (AFM). The results of spectroscopic studies suggest that the hybrids assembled through H-bonds can maintain the light-induced Förster energy transfer from the PDI-glu chromophore to the conjugated polymer and then to GO leading to fluorescence quenching. In the hybrids assembled through coordination bonding with zinc clusters, the energy transfer proceeds from PDI-glu to the PDA polymer, whereas the transfer from PDA to GO is quenched completely. Another important characteristic of these ultrathin hybrids is their stability with respect to photobleaching of chromophores due to the acceptor properties of GO. The as-assembled hybrid nanofilms were integrated with conventional photovoltaic planar architectures to study their photoelectric properties. The zinc-containing hybrids integrated with a hole transport layer exhibited photovoltaic properties. The cell with the integrated four-component hybrid comprising both PDI-glu and PDA showed a photocurrent/dark current ratio almost an order higher than that of the three-component hybrid assembled with PDA only. The supramolecular method based on the interfacial self-assembly can be extended to a wide variety of organic chromophores and polymerizable surfactants for integrating them into multicomponent functional GO-based nanohybrids with targeted properties for organic electronics.
RESUMEN
A ternary photovoltaic blend containing the PTB7 donor component, the PC71BM acceptor component, and colloidal quantum dots of lead sulfide (PbS QDs) was investigated using broadband dielectric spectroscopy. In the dielectric loss spectrum of PTB7:PC71BM:PbS QDs, γ- and ß-relaxation processes in PTB7 were recognized and analyzed in terms of Arrhenius-type equations. To elucidate the effect of PbS QDs on molecular dynamics of PTB7, the activation energies of both processes were evaluated and compared with those obtained for the binary PTB7:PC71BM blend. Using the CELIV method, the charge carrier mobility was estimated. The PbS QD incorporation into the binary blend was shown to decrease both electron and hole mobility in the ternary PTB7:PC71BM:PbS QD blend. For evaluating the charge carrier lifetime in the ternary blend, the Cole-Cole diagrams derived from the dc conductivity data were plotted. The charge carrier lifetime was found to be much less than the hole extraction time, thus providing effective accumulation of charge carries at the electrodes in the ternary blend under investigation.
RESUMEN
Controlled self-assembly and rapid disintegration of supramolecular nanowires is potentially useful for ecology-friendly organic electronics. Herein, a novel method exploiting the binding between crown-substituted double-decker lanthanide phthalocyaninates (ML2, M = Lu, Ce, Tb) and K+ ions is applied for the one-step fabrication of macroscopically long conductive one-dimensional quasi-metal-organic frameworks. Their properties are controlled by the size of the lanthanide ion guiding the assembly through either intra- or intermolecular interactions. A LuL2 linker with a small interdeck distance yields fully conjugated intermolecular-bonded K+-LuL2 nanowires with a thickness of 10-50 nm, a length of up to 50 µm, and a conductivity of up to 11.4 S cm-1, the highest among them being reported for phthalocyanine assemblies. The large size of CeL2 and TbL2 leads to the formation of mixed intra- and intermolecular K+-ML2 phases with poor electric properties. A field-assisted method is developed to deposit aligned conductive K+-LuL2 assemblies on solids. The solid-supported nanowires can be disintegrated into starting components in a good aprotic solvent for further recycling.
RESUMEN
Three new benzothiadiazole (BTD)-containing luminophores with different configurations of aryl linkers have been prepared via Pd-catalyzed cross-coupling Suzuki and Buchwald-Hartwig reactions. Photophysical and electroluminescent properties of the compounds were investigated to estimate their potential for optoelectronic applications. All synthesized structures have sufficiently high quantum yields in film. The BTD with aryl bridged carbazole unit demonstrated the highest electrons and holes mobility in a series. OLED with light-emitting layer (EML) based on this compound exhibited the highest brightness, as well as current and luminous efficiency. The synthesized compounds are not only luminophores with a high photoluminescence quantum yield, but also active transport centers for charge carriers in EML of OLED devices.
RESUMEN
A mixture of water suspensions of graphene oxide (GO) and polytetrafluoroethylene (PTFE) was used to make the films GO-PTFE (50:50). They became conductive (2.0-2.8 S/cm) while maintaining flexibility after reduction with hydrazine and subsequent annealing at 370 °C. The structure and morphology of the reduced films (rGO-PTFE) are examined in detail by means of a number of techniques such as scanning electron microscopy, atomic force microscopy, X-ray photoelectron spectroscopy, Raman, and contact angle wetting. The results of the films tested as current collectors in a metal-free supercapacitor with electrodes from microwave exfoliated GO and an acid (1 M H2SO4) electrolyte are presented.
RESUMEN
Organometal triiodide perovskites are promising, high-performance absorbers in solar cells. Considering the perovskite as a thin film absorber, we solve transport equations and analyse the efficiency of a simple heterojunction configuration as a function of electron-hole diffusion lengths. We found that for a thin film thickness of ≃1 µm the maximum efficiency of ≃31% could be achieved at the diffusion length of â¼100 µm.
RESUMEN
Polymer composites based on poly(N,N'-bis-4-butylphenyl-N,N'-bisphenyl)benzidine (poly-TPD) with PCBM and copper(II) pyropheophorbide derivative (Cu-PP) were developed. In thin films of the poly-TPD and Cu-PP composites, the charge carrier mobility was investigated for the first time. In the ternary poly-TPD:PCBM:Cu-PP composite, the electron and hole mobilities are the most balanced compared to binary composites and the photoconductivity is enhanced due to the sensitization by Cu-PP in blue and red spectral ranges. The new composites are promising for use in the development of photodetectors.
RESUMEN
In this review, we summarize recent developments in the field of the mechanochemistry of polymers. The aim of the review is to consider the consequences of mechanical forces and actions on polymers and polymer synthesis. First, we review classical works on chemical reactions and polymerization processes under strong shear deformations. Then, we analyze two emerging directions of research in mechanochemistry-the role of mechanophores and, for the first time, new physical phenomena, accompanying external impulse mechanical actions on polymers. Mechanophores have been recently proposed as sensors of fatigue and cracks in polymers and composites. The effects of the high-pressure pulsed loading of polymers and composites include the Dzyaloshinskii-Moriya effect, emission of superradiation and the formation of metal nanoparticles. These effects provide deeper insight into the mechanism of chemical reactions under shear deformations and pave the way for further research in the interests of modern technologies.
RESUMEN
Studies on copper(II) tetrafluorenyl porphyrinate (CuTFP) and copper(II) tetraphenyl porphyrinate (CuTPP) have been focused on the charge carrier transport in their solid films and electroluminescence of their composites. In the dye layers deposited by resistive thermal evaporation, the mobilities of holes and electrons are on the order of 10-5 and 10-6 cm2 V-1 s-1 for the charge transport under the influence of traps, and the charge mobility reaches the order of 10-3 cm2 V-1 s-1 at space-charge-limited current in the nontrapping mode. For the dye molecules, the correlation between the mobility of charge carriers and the distribution of the electron density on the highest occupied molecular orbital (HOMO) and lowest unoccupied molecular orbital (LUMO), which serve as hopping sites for holes and electrons, respectively, is considered. Organic light-emitting diodes incorporating the dye molecules as emitting dopants demonstrate electroluminescence in the near-infrared (IR) range.
RESUMEN
The structure of experimentally designed solar cells was optimized in terms of the photoactive layer thickness for both organic bulk heterojunction and hybrid perovskite solar cells. The photoactive layer thickness had a totally different behavior on the performance of the organic and hybrid solar cells. Analysis of the optical parameters using transfer matrix modeling within the Maxwell-Garnett effective refractive index model shows that light absorbance and exciton generation rate in the photoactive layer can be used to optimize the thickness range of the photoactive layer. Complete agreement between experimental and simulated data for solar cells with photoactive materials that have very different natures proves the validity of the proposed modeling method. The proposed simple method which is not time-consuming to implement permits to obtain a preliminary assessment of the reasonable range of layer thickness that will be needed for designing experimental samples.
RESUMEN
Transparent-to-colored electrochromic devices exhibit promising application prospects and have gained popularity. Herein, two triphenylamine derivatives TPA-OCH3 and TPA-CN with styryl moieties and different donor or acceptor units were designed and synthesized to further prepare solvent-resistant thermally cross-linking polymer P(TPA-OCH3) and P(TPA-CN) without any additional initiator. P(TPA-OCH3) and P(TPA-CN) possess two pairs of redox peaks, and P(TPA-OCH3) shows a lower onset oxidation potential compared to P(TPA-CN) because of the pendent donor unit. Correspondingly, both polymers exhibit multicolored changes from the neutral colorless state to noticeable oxidized colors under different potentials. Furthermore, the thermally cross-linking copolymer P(TPA-OCH3-co-TPA-CN) was obtained by TPA-OCH3 and TPA-CN (the molar ratio is 2:1) and presents outstanding electrochromism with four color changes (colorless-orange-blue-purple) due to the multistep redox process of TPA-OCH3 and TPA-CN units. It is more intriguing that the electrochromic device based on the copolymer films possesses a high optical contrast of 57.8% at 680 nm, fast switching time (0.52 and 0.66 s), and robust cyclic stability over 30â¯000 cycles with very little decay. Therefore, the thermally cross-linking copolymer is a promising candidate material for high-performance transmittive electrochromic devices, such as smart windows, sunglasses, and E-papers.
RESUMEN
Two series of new N,S,Se-heteroacenes, namely, 6H-benzo[4',5']selenopheno[2',3':4,5]thieno[3,2-b]indoles and 12H-benzo[4â³,5â³]selenopheno[2â³,3â³:4',5']thieno[2',3'4,5]thieno[3,2-b]indoles, were successfully obtained using an effective strategy based on Fiesselmann thiophene and Fischer indole synthesis. The new molecules exhibit a large optical band gap (2.82 eV < E g opt < 3.23 eV) and their highest occupied molecular orbital (HOMO) energy formed by the plane π-core ranges between -5.2 and -5.6 eV, with the narrower optical band gap and lower HOMO level corresponding to selenated heteroacenes. In thin solid films of the heteroacenes, hole mobility measured using the conventional CELIV technique ranges between 10-5 and 10-4 cm2·V-1·s-1. All these make the proposed condensed-ring compounds a promising platform for the development of hole-transporting materials applicable in organic electronics.
RESUMEN
Herein, we describe the synthesis of unsymmetrically substituted dibenzo[f,h]furazano[3,4-b]quinoxalines by intramolecular cyclization through direct transition metal-free C-H functionalization. The electrochemical and photophysical properties for several polycycles have been measured. In thin films of the dibenzo[f,h]furazano[3,4-b]quinoxalines, hole mobility is in the order of 10-4 cm2 V-1 s-1. The results show that the HOMO and LUMO energy levels are appropriate for using the compounds as hole-transport materials in thin-film devices, in particular, organic and perovskite solar cells.
RESUMEN
The electrical properties of thin films of poly(arylene ether ketone) copolymers (co-PAEKs) with a fraction of phthalide-containing units of 3, 5, and 50 mol% in the main chain were investigated by using radiation-induced conductivity (RIC) measurements. Transient current signals and current-voltage (I-V) characteristics were obtained by exposing 20 ÷ 25 µm thick films of the co-PAEKs to monoenergetic electron pulses with energy ranging from 3 to 50 keV in an electric field ranging from 5 to 40 V/µm. The Rose-Fowler-Vaisberg semi-empirical model based on a multiple trapping formalism was used for an analysis of the RIC data, and the parameters of the highly dispersive charge carrier transport were evaluated. The analysis revealed that charge carriers moved in isolation from each other, and the applied electric fields were below the threshold field triggering the switching effect (a reversible high-to-low resistivity transition) in the co-PAEK films. It was also found that the co-PAEK films, due to the super-linear I-V characteristics, are highly resistant to electrostatic discharges arising from the effects of ionizing radiation. This property is important for the development of protective coatings for electronic devices.
RESUMEN
Copper phthalocyanine (CuPc) films with different morphologies were electrodeposited on the surfaces of ITO electrodes. Then, in each case, a polyaniline (PANI) film was electrochemically polymerized in situ on the surface of the copper phthalocyanine film to form a CuPc-PANI composite film. The electrochemical properties of the CuPc-PANI composite film were observed to be much better than those of the film without CuPc. With the modification involving the CuPc nanowires, the composite film formed a finer particle surface and an increased interface area between the PANI and the electrolyte. Compared to the single-component PANI film, the CuPc-PANI composite film exhibited better performance with a higher optical contrast (58% at 730 nm), a faster response speed (coloring time of 1.02 s, discoloring time of 1.96 s), and better cycling stability (68.71% of the initial electrochemical activity after 500 cycles, in contrast to only about 48.02% for PANI). Moreover, the CuPc-PANI film shows a new feature that can be used as a supercapacitor (specifically a capacitance value of about 5.4 mF cm-2 at typical currents). Our results demonstrate that the prepared CuPc-PANI composite film is one of the best candidates for multiple potential applications such as high-performance polymer electrochromic materials and supercapacitors.
RESUMEN
Electrical, photoelectrical, and optical properties of thin films of a new heat-resistant polyphenylquinoline synthesized using facile methods were investigated. An analysis of the obtained temperature dependences of the dark conductivity and photoconductivity indicates the hopping mechanism of conductivity over localized states arranging at the energy distance of 0.8 eV from the Fermi level located inside the band gap of the investigated material. The optical band gap of the studied material was estimated from an analysis of the spectral dependences of the photoconductivity and absorption coefficient before (1.8-1.9 eV) and after (2.0-2.2 eV) annealing at temperatures exceeding 100 °C. The Gaussian character of the distribution of the localized states of density inside the band gap near the edges of the bands was established. A mechanism of changes in the optical band gap of the investigating polymer under its annealing is proposed.
RESUMEN
Nickel oxide (NiO) is one of the most promising and high-performing Hole Transporting Layer (HTL) in inverted perovskite solar cells due to ideal band alignment with perovskite absorber, wide band gap, and high mobility of charges. At the same time, however, NiO does not provide good contact and trap-free junction for hole collection. In this paper, we examine this problem by developing a double hole transport configuration with a copper iodide (CuI) interlayer for efficient surface passivation. Transient photo-current (TPC) measurements showed that Perovskite/HTL interface with CuI interlayer has an improved hole injection; CuI passivation reduces the concentration of traps and the parasitic charge accumulation that limits the flow of charges. Moreover, we found that CuI protect the HTL/perovskite interface from degradation and consequently improve the stability of the cell. The presence of CuI interlayer induces an improvement of open-circuit voltage VOC (from 1.02 V to 1.07 V), an increase of the shunt resistance RSH (100%), a reduction of the series resistance RS (-30%), and finally a +10% improvement of the solar cell efficiency.
RESUMEN
The targeted design of lanthanide-based emitters for solution-processed organic light-emitting diodes (OLEDs) resulted in obtaining an NIR OLED with one of the highest efficiencies among ytterbium-based solution-processed OLEDs (30 µW W-1). The design was aimed at the combination of high luminescence efficiency with solubility and charge carrier mobility. The latter was achieved thanks to the introduction of the purposefully selected neutral ligands, which combine electron mobility and the ability to sensitize lanthanide luminescence. Besides, the HOMO and LUMO energies and charge carrier mobility of solution-processed thin films of coordination compounds were measured experimentally for the first time, and novel highly luminescent europium-based materials with PLQYs of up to 80% and purely NIR luminescent ytterbium complexes were obtained.