An efficient selenium transport pathway of selenoprotein P utilizing a high-affinity ApoER2 receptor variant and being independent of selenocysteine lyase.

Selenoprotein P (SeP, encoded by the SELENOP gene) is a plasma protein that contains selenium in the form of selenocysteine residues (Sec, a cysteine analog containing selenium instead of sulfur). SeP functions for the transport of selenium to specific tissues in a receptor-dependent manner. Apolipoprotein E receptor 2 (ApoER2) has been identified as a SeP receptor. However, diverse variants of ApoER2 have been reported, and the details of its tissue specificity and the molecular mechanism of its efficiency remain unclear. In the present study, we found that human T lymphoma Jurkat cells have a high ability to utilize selenium via SeP, while this ability was low in human rhabdomyosarcoma cells. We identified an ApoER2 variant with a high affinity for SeP in Jurkat cells. This variant had a dissociation constant value of 0.67 nM and a highly glycosylated O-linked sugar domain. Moreover, the acidification of intracellular vesicles was necessary for selenium transport via SeP in both cell types. In rhabdomyosarcoma cells, SeP underwent proteolytic degradation in lysosomes and transported selenium in a Sec lyase-dependent manner. However, in Jurkat cells, SeP transported selenium in Sec lyase-independent manner. These findings indicate a preferential selenium transport pathway involving SeP and high-affinity ApoER2 in a Sec lyase-independent manner. Herein, we provide a novel dynamic transport pathway for selenium via SeP.

Induced Circular Dichroism Analysis of Thermally Induced Conformational Changes on Protein Binding Sites Under a Crowding Environment.

Protein-ligand interactions in crowded cellular environments play a crucial role in biological functions. The crowded environment can perturb the overall protein structure and local conformation, thereby influencing the binding pathway of protein-ligand reactions within the cellular milieu. Therefore, a detailed understanding of the local conformation is crucial for elucidating the intricacies of protein-ligand interactions in crowded cellular environments. In this study, we investigated the feasibility of induced circular dichroism (ICD) using 8-anilinonaphthalene-1-sulfonic acid (ANS) for local conformational analysis at the binding site in a crowding environment. Bovine serum albumin (BSA) concentration-dependent measurements were performed to assess the feasibility of ANS-ICD for analyzing protein interior binding sites. The results showed distinct changes in the ANS-ICD spectra of BSA solutions, indicating their potential for analyzing the internal conformation of proteins. Moreover, temperature-dependent measurements were performed in dilute and crowding environments, revealing distinct denaturation pathways of BSA binding sites. Principal component analysis of ANS-ICD spectral changes revealed lower temperature pre-denaturation in the crowded solution than that in the diluted solution, suggesting destabilization of binding sites owing to self-crowding repulsive interactions. The established ANS-ICD method can provide valuable conformational insights into protein-ligand interactions in crowded cellular environments.

Dispersion Effect of Molecular Crowding on Ligand-Protein Surface Binding Sites of Escherichia coli RNase HI.

The molecular crowding effect on ligand-protein interactions, which plays several crucial roles in life processes, has been investigated using various models by adding crowding agents to mimic the intracellular environment. Several studies evaluating this effect have focused on the ligand-protein binding reaction of well-structured binding sites with rigid conformations. However, the crowding effect on flexible binding sites is not well-understood, especially in terms of the conformations. In this work, to elucidate the detailed molecular mechanism underlying the ligand-protein interactions with flexible binding sites on a protein surface, we studied the interaction between the basic protrusion of Escherichia coli ribonuclease HI (RNase HI) and 8-anilinonaphthalene-1-sulfonic acid (ANS). The RNase HI concentration-dependent measurement of ANS fluorescence combined with the multivariate analysis and the fluorescence vibronic structure analysis revealed an increase in the heterogeneous species with an increase in the protein concentration, which is a different behavior from that of proteins with rigid binding sites. This result indicates that ANS molecules bind to the additional binding sites because of the destabilization of the main sites by the excluded volume effect in a crowded environment. The fluorescence vibronic structure analysis yields a detailed molecular picture, indicating that the main species of ANS can have a distorted structure. On the other hand, some ANS molecules move to the minor binding sites of a different microenvironment to secure a stabilized structure. These spectroscopic analyses may show a hypothesis, suggesting that the decrease in the ΔG difference between the main and minor sites due to destabilization of the main binding site could lower the potential barrier between them, inducing the dispersion of binding pathways.

Dynamic Assembly/Disassembly of Staphylococcus aureus FtsZ Visualized by High-Speed Atomic Force Microscopy.

FtsZ is a key protein in bacterial cell division and is assembled into filamentous architectures. FtsZ filaments are thought to regulate bacterial cell division and have been investigated using many types of imaging techniques such as atomic force microscopy (AFM), but the time scale of the method was too long to trace the filament formation process. Development of high-speed AFM enables us to achieve sub-second time resolution and visualize the formation and dissociation process of FtsZ filaments. The analysis of the growth and dissociation rates of the C-terminal truncated FtsZ (FtsZt) filaments indicate the net growth and dissociation of FtsZt filaments in the growth and dissociation conditions, respectively. We also analyzed the curvatures of the full-length FtsZ (FtsZf) and FtsZt filaments, and the comparative analysis indicated the straight-shape preference of the FtsZt filaments than those of FtsZf. These findings provide insights into the fundamental dynamic behavior of FtsZ protofilaments and bacterial cell division.

Revisiting the Rate-Limiting Step of the ANS-Protein Binding at the Protein Surface and Inside the Hydrophobic Cavity.

8-Anilino-1-naphthalenesulfonic acid (ANS) is used as a hydrophobic fluorescence probe due to its high intensity in hydrophobic environments, and also as a microenvironment probe because of its unique ability to exhibit peak shift and intensity change depending on the surrounding solvent environment. The difference in fluorescence can not only be caused by the microenvironment but can also be affected by the binding affinity, which is represented by the binding constant (K). However, the overall binding process considering the binding constant is not fully understood, which requires the ANS fluorescence binding mechanism to be examined. In this study, to reveal the rate-limiting step of the ANS-protein binding process, protein concentration-dependent measurements of the ANS fluorescence of lysozyme and bovine serum albumin were performed, and the binding constants were analyzed. The results suggest that the main factor of the binding process is the microenvironment at the binding site, which restricts the attached ANS molecule, rather than the attractive diffusion-limited association. The molecular mechanism of ANS-protein binding will help us to interpret the molecular motions of ANS molecules at the binding site in detail, especially with respect to an equilibrium perspective.

Spectroscopic Evidence of the Salt-Induced Conformational Change around the Localized Electric Charges on the Protein Surface of Fibronectin Type III.

The effect of salt on the electrostatic interaction of a protein is an important issue, because addition of salt affects protein stability and association/aggregation. Although adding salt is a generally recognized strategy to improve protein stability, this improvement does not necessarily occur. The lack of an effect upon the addition of salt was previously confirmed for the tenth fibronectin type III domain from human fibronectin (FN3) by thermal stability analysis. However, the detailed molecular mechanism is unknown. In the present study, by employing the negatively charged carboxyl triad on the surface of FN3 as a case study, the molecular mechanism of the inefficient NaCl effect on protein stability was experimentally addressed using spectroscopic methods. Complementary analysis using Raman spectroscopy and 8-anilino-1-naphthalenesulfonic acid fluorescence revealed the three-phase behavior of the salt-protein interaction between NaCl and FN3 over a wide salt concentration range from 100 mM to 4.0 M, suggesting that the Na+-specific binding to the negatively charged carboxyl triad causes a local conformational change around the binding site with an accompanying structural change in the overall protein, which contributes to the protein's structural destabilization. This spectroscopic evidence clarifies the molecular understanding of the inefficiency of salt to improve protein stability. The findings will inform the optimization of formulation conditions.

Structural Basis for the Serratia marcescens Lipase Secretion System: Crystal Structures of the Membrane Fusion Protein and Nucleotide-Binding Domain.

Serratia marcescens secretes a lipase, LipA, through a type I secretion system (T1SS). The T1SS for LipA, the Lip system, is composed of an inner membrane ABC transporter with its nucleotide-binding domains (NBD), LipB, a membrane fusion protein, LipC, and an outer membrane channel protein, LipD. Passenger protein secreted by this system has been functionally and structurally characterized well, but relatively little information about the transporter complex is available. Here, we report the crystallographic studies of LipC without the membrane anchor region, LipC-, and the NBD of LipB (LipB-NBD). LipC- crystallographic analysis has led to the determination of the structure of the long α-helical and lipoyl domains, but not the area where it interacts with LipB, suggesting that the region is flexible without LipB. The long α-helical domain has three α-helices, which interacts with LipD in the periplasm. LipB-NBD has the common overall architecture and ATP hydrolysis activity of ABC transporter NBDs. Using the predicted models of full-length LipB and LipD, the overall structural insight into the Lip system is discussed.

Monobody-mediated alteration of enzyme specificity.

Current methods for engineering enzymes modify enzymes themselves and require a detailed mechanistic understanding or a high-throughput assay. Here, we describe a new approach where catalytic properties are modulated with synthetic binding proteins, termed monobodies, directed to an unmodified enzyme. Using the example of a ß-galactosidase from Bacillus circulans, we efficiently identified monobodies that restricted its substrates for its transgalactosylation reaction and selectively enhanced the production of small oligosaccharide prebiotics.

Proteolysis of abnormal prion protein with a thermostable protease from Thermococcus kodakarensis KOD1.

The abnormal prion protein (scrapie-associated prion protein, PrP(Sc)) is considered to be included in the group of infectious agents of transmissible spongiform encephalopathies. Since PrP(Sc) is highly resistant to normal sterilization procedures, the decontamination of PrP(Sc) is a significant public health issue. In the present study, a hyperthermostable protease, Tk-subtilisin, was used to degrade PrP(Sc). Although PrP(Sc) is known to be resistant toward proteolytic enzymes, Tk-subtilisin was able to degrade PrP(Sc) under extreme conditions. The level of PrP(Sc) in brain homogenates was found to decrease significantly in vitro following Tk-subtilisin treatment at 100 °C, whereas some protease-resistant fractions remain after proteinase K treatment. Rather small amounts of Tk-subtilisin (0.3 U) were required to degrade PrP(Sc) at 100 °C and pH 8.0. In addition, Tk-subtilisin was observed to degrade PrP(Sc) in the presence of sodium dodecyl sulfate or other industrial surfactants. Although several proteases degrading PrP(Sc) have been reported, practical decontamination procedures using enzymes are not available. This report aims to provide basic information for the practical use of a proteolytic enzyme for PrP(Sc) degradation.

Utilization of low-stability variants in protein evolutionary engineering.

Evolutionary engineering involves repeated mutations and screening and is widely used to modify protein functions. However, it is important to diversify evolutionary pathways to eliminate the bias and limitations of the variants by using traditionally unselected variants. In this study, we focused on low-stability variants that are commonly excluded from evolutionary processes and tested a method that included an additional restabilization step. The esterase from the thermophilic bacterium Alicyclobacillus acidocaldarius was used as a model protein, and its activity at its optimum temperature of 65 °C was improved by evolutionary experiments using random mutations by error-prone PCR. After restabilization using low-stability variants with low-temperature (37 °C) activity, several re-stabilizing variants were obtained from a large number of variant libraries. Some of the restabilized variants achieved by removing the destabilizing mutations showed higher activity than that of the wild-type protein. This implies that low-stability variants with low-temperature activity can be re-evolved for future use. This method will enable further diversification of evolutionary pathways.

Engineering a monobody specific to monomeric Cu/Zn-superoxide dismutase associated with amyotrophic lateral sclerosis.

Misfolding of mutant Cu/Zn-superoxide dismutase (SOD1) has been implicated in familial form of amyotrophic lateral sclerosis (ALS). A natively folded SOD1 forms a tight homodimer, and the dimer dissociation has been proposed to trigger the oligomerization/aggregation of SOD1. Besides increasing demand for probes allowing the detection of monomerized forms of SOD1 in various applications, the development of probes has been limited to conventional antibodies. Here, we have developed Mb(S4) monobody, a small synthetic binding protein based on the fibronectin type III scaffold, that recognizes a monomeric but not dimeric form of SOD1 by performing combinatorial library selections using phage and yeast-surface display methods. Although Mb(S4) was characterized by its excellent selectivity to the monomeric conformation of SOD1, the monomeric SOD1/Mb(S4) complex was not so stable (apparent Kd ~ µM) as to be detected in conventional pull-down experiments. Instead, the complex of Mb(S4) with monomeric but not dimeric SOD1 was successfully trapped by proximity-enabled chemical crosslinking even when reacted in the cell lysates. We thus anticipate that Mb(S4) binding followed by chemical crosslinking would be a useful strategy for in vitro and also ex vivo detection of the monomeric SOD1 proteins.

Conformation state-specific monobodies regulate the functions of flexible proteins through conformation trapping.

Synthetic binding proteins have emerged as modulators of protein functions through protein-protein interactions (PPIs). Because PPIs are influenced by the structural dynamics of targeted proteins, investigating whether the synthetic-binders-based strategy is applicable for proteins with large conformational changes is important. This study demonstrates the applicability of monobodies (fibronectin type-III domain-based synthetic binding proteins) in regulating the functions of proteins that undergo tens-of-angstroms-scale conformational changes, using an example of the A55C/C77S/V169C triple mutant (Adktm ; a phosphoryl transfer-catalyzing enzyme with a conformational change between OPEN/CLOSED forms). Phage display successfully developed monobodies that recognize the OPEN form (substrate-unbound form), but not the CLOSED form of Adktm . Two OPEN form-specific clones (OP-2 and OP-4) inhibited Adktm kinase activity. Epitope mapping with a yeast-surface display/flow cytometry indicated that OP-2 binds to the substrate-entry side of Adktm , whereas OP-4 binding occurs at another site. Small angle X-ray scattering  coupled with size-exclusion chromatography (SEC-SAXS) indicated that OP-4 binds to the hinge side opposite to the substrate-binding site of Adktm , retaining the whole OPEN-form structure of Adktm . Titration of the OP-4-Adktm complex with Ap5 A, a transition-state analog of Adktm , showed that the conformational shift to the CLOSED form was suppressed although Adktm retained the OPEN-form (i.e., substrate-binding ready form). These results show that OP-4 captures and stabilizes the OPEN-form state, thereby affecting the hinge motion. These experimental results indicate that monobody-based modulators can regulate the functions of proteins that show tens-of-angstroms-scale conformational changes, by trapping specific conformational states generated during large conformational change process that is essential for function exertion.

Structures of a FtsZ single protofilament and a double-helical tube in complex with a monobody.

FtsZ polymerizes into protofilaments to form the Z-ring that acts as a scaffold for accessory proteins during cell division. Structures of FtsZ have been previously solved, but detailed mechanistic insights are lacking. Here, we determine the cryoEM structure of a single protofilament of FtsZ from Klebsiella pneumoniae (KpFtsZ) in a polymerization-preferred conformation. We also develop a monobody (Mb) that binds to KpFtsZ and FtsZ from Escherichia coli without affecting their GTPase activity. Crystal structures of the FtsZ-Mb complexes reveal the Mb binding mode, while addition of Mb in vivo inhibits cell division. A cryoEM structure of a double-helical tube of KpFtsZ-Mb at 2.7 Å resolution shows two parallel protofilaments. Our present study highlights the physiological roles of the conformational changes of FtsZ in treadmilling that regulate cell division.

Requirement of Ca(2+) ions for the hyperthermostability of Tk-subtilisin from Thermococcus kodakarensis.

Tk-subtilisin, a hyperthermostable subtilisin-like serine protease from Thermococcus kodakarensis, matures from the inactive precursor, Pro-Tk-subtilisin (Pro-TKS), upon autoprocessing and degradation of the propeptide (Tkpro). It contains seven Ca(2+) ions. Four of them (Ca2-Ca5) are responsible for folding of Tk-subtilisin. In this study, to clarify the role of the other three Ca(2+) ions (Ca1, Ca6, and Ca7), we constructed Pro-TKS derivatives lacking the Ca1 ion (Pro-TKS/ΔCa1), Ca6 ion (Pro-TKS/ΔCa6), and Ca7 ion (Pro-TKS/ΔCa7), and their active site mutants (Pro-S324A/ΔCa1, Pro-S324A/ΔCa6, and Pro-S324A/ΔCa7, respectively). Pro-TKS/ΔCa6 and Pro-TKS/ΔCa7 fully matured into their active forms upon incubation at 80 °C for 30 min as did Pro-TKS. The mature enzymes were as active as Tk-subtilisin at 80 °C, indicating that the Ca6 and Ca7 ions are not important for activity. In contrast, Pro-TKS/ΔCa1 matured poorly at 80 °C because of the instability of its mature domain. The enzymatic activity of Tk-subtilisin/ΔCa1 was determined to be 50% of that of Tk-subtilisin using the refolded protein. This result suggests that the Ca1 ion is required for the maximal activity of Tk-subtilisin. The refolding rates of all Pro-S324A derivatives were comparable to that of Pro-S324A (active site mutant of Pro-TKS), indicating that these Ca(2+) ions are not needed for folding of Tk-subtilisin. The stabilities of Pro-S324A/ΔCa1 and Pro-S324A/ΔCa6 were decreased by 26.6 and 11.7 °C, respectively, in T(m) compared to that of Pro-S324A. The half-lives of Tk-subtilisin/ΔCa6 and Tk-subtilisin/ΔCa7 at 95 °C were 8- and 4-fold lower than that of Tk-subtilisin, respectively. These results suggest that the Ca1, Ca6, and Ca7 ions, especially the Ca1 ion, contribute to the hyperthermostabilization of Tk-subtilisin.

Inhibition of chymotrypsin- and subtilisin-like serine proteases with Tk-serpin from hyperthermophilic archaeon Thermococcus kodakaraensis.

A serpin homologue (Tk-serpin) from the hyperthermophilic archaeon Thermococcus kodakaraensis was overproduced in E. coli, purified, and characterized. Tk-serpin irreversibly inhibits Tk-subtilisin (TKS) from the same organism with the second-order association rate constants (k(ass)) of 5.2×10³ M⁻¹ s⁻¹ at 40°C and 3.1×105 M⁻¹ s⁻¹ at 80°C, indicating that Tk-serpin inhibits TKS more strongly at 80°C than at 40°C. It also irreversibly inhibits chymotrypsin, subtilisin Carlsberg, and proteinase K at 40°C with the k(ass) values comparable to that for TKS at 80°C. Casein zymography showed that Tk-serpin inhibits these proteases by forming a SDS-resistant complex, which is typical to inhibitory serpins. The ratio of moles of Tk-serpin needed to inhibit 1 mol of protease (stoichiometry of inhibition, SI) varies from 40 to 80 at 20°C, but decreases to the minimum values of 3-7 as the temperature increases. The inhibitory activities of Tk-serpin for these proteases increase as the stabilities of these proteases decrease, suggesting that a flexibility of the active-site of protease is one of the determinants for susceptibility of protease to inhibition by Tk-serpin. This report showed for the first time that Tk-serpin inhibits both chymotrypsin- and subtilisin-like serine proteases and its inhibitory activity increases as the temperature increases up to 100°C.

Requirement of insertion sequence IS1 for thermal adaptation of Pro-Tk-subtilisin from hyperthermophilic archaeon.

Tk-subtilisin from the hyperthermophilic archaeon Thermococcus kodakarensis matures from Pro-Tk-subtilisin (Pro-TKS) upon autoprocessing and degradation of propeptide. Pro-TKS contains the insertion sequence (IS1) at the N-terminus of the mature domain as compared to bacterial pro-subtilisins. To analyze the role of IS1, the Pro-TKS derivative without IS1 (∆IS1-Pro-TKS) and its active-site mutants (∆IS1-Pro-S324A and ∆IS1-Pro-S324C) were constructed and characterized. ∆IS1-Pro-S324A and ∆IS1-Pro-TKS represent an unautoprocessed and autoprocessed form of ∆IS1-Pro-TKS, respectively. The CD and ANS fluorescence spectra of these proteins indicate that folding of ∆IS1-Pro-TKS is not completed by binding of Ca(2+) ions but is completed by the subsequent autoprocessing reaction. Thermal denaturation of these proteins analyzed by DSC and CD spectroscopy indicates that unautoprocessed ∆IS1-Pro-TKS is less stable than autoprocessed ∆IS1-Pro-TKS by 26.3 °C in T (m). The stability of autoprocessed ∆IS1-Pro-TKS is comparable to that of Pro-TKS, which is slightly lower than that of unautoprocessed Pro-TKS. These results suggest that ∆IS1-Pro-TKS is fully folded and greatly stabilized by autoprocessing. ∆IS1-Pro-TKS more slowly matured to ∆IS1-Tk-subtilisin than Pro-TKS did, due to a decrease in the autoprocessing rate. We propose that IS1 is required not only for hyperstabilization of Pro-TKS but also for its rapid maturation.

Accident at the Fukushima Dai-ichi nuclear power stations of TEPCO--outline & lessons learned.

The severe accident that broke out at Fukushima Dai-ichi nuclear power stations on March 11, 2011, caused seemingly infinite damage to the daily life of residents. Serious and wide-spread contamination of the environment occurred due to radioactive materials discharged from nuclear power stations (NPSs). At the same time, many issues were highlighted concerning countermeasures to severe nuclear accidents. The accident is outlined, and lessons learned are extracted with respect to the safety of NPSs, as well as radiation protection of residents under the emergency involving the accident. The materials of the current paper are those released by governmental agencies, academic societies, interim reports of committees under the government, and others.

Crystal structure of stable protein CutA1 from psychrotrophic bacterium Shewanella sp. SIB1.

CutA1 is widely found in bacteria, plants and animals, including humans. The functions of CutA1, however, have not been well clarified. It is known that CutA1s from Pyrococcus horikoshii, Thermus thermophilus and Oryza sativa unfold at temperatures remarkably higher than the growth temperatures of the host organisms. In this work the crystal structure of CutA1 from the psychrotrophic bacterium Shewanella sp. SIB1 (SIB1-CutA1) in a trimeric form was determined at 2.7 Šresolution. This is the first crystal structure of a psychrotrophic CutA1. The overall structure of SIB1-CutA1 is similar to those of CutA1 from Homo sapiens, Escherichia coli, Pyrococcus horikoshii, Thermus thermophilus, Termotoga maritima, Oryza sativa and Rattus norvergicus. A peculiarity is observed in the ß2 strand. The ß2 strand is divided into two short ß strands, ß2a and ß2b, in SIB1-CutA1. A thermal denaturation experiment revealed that SIB1-CutA1 does not unfold completely at 363 K at pH 7.0, although Shewanella sp. SIB1 cannot grow at temperatures exceeding 303 K. These results indicate that the trimeric structural motif of CutA1 is the critical factor in its unusually high stability and suggest that CutA1 needs to maintain its high stability in order to function, even in psychrotrophs.

Exploring mutable conserved sites and fatal non-conserved sites by random mutation of esterase from Sulfolobus tokodaii and subtilisin from Thermococcus kodakarensis.

Homologous proteins differ in their amino acid sequences at several positions. Generally, conserved sites are recognized as not suitable for amino acid substitution, and thus in evolutionary protein engineering, non-conserved sites are often selected as mutation sites. However, there have also been reports of possible mutations in conserved sites. In this study, we explored mutable conserved sites and immutable non-conserved sites by testing random mutations of two thermostable proteins, an esterase from Sulfolobus tokodaii (Sto-Est) and a subtilisin from Thermococcus kodakarensis (Tko-Sub). The subtilisin domain of Tko-Sub needs Ca2+ ions and the propeptide domain for stability, folding and maturation. The results from the two proteins showed that about one-third of the mutable sites were detected in conserved sites and some non-conserved sites lost enzymatic activity at high temperatures due to mutation. Of the conserved sites in Sto-Est, the sites on the loop, on the surface, and far from the active site are more resistant to mutation. In Tko-Sub, the sites flanking Ca2+-binding sites and propeptide were undesirable for mutation. The results presented here serve as an index for selecting mutation sites and contribute to the expansion of available sequence range by introducing mutations at conserved sites.

Insertion loop-mediated folding propagation governs efficient maturation of hyperthermophilic Tk-subtilisin at high temperatures.

The serine protease Tk-subtilisin from the hyperthermophilic archaeon Thermococcus kodakarensis possesses three insertion loops (IS1-IS3) on its surface, as compared to its mesophilic counterparts. Although IS1 and IS2 are required for maturation of Tk-subtilisin at high temperatures, the role of IS3 remains unknown. Here, CD spectroscopy revealed that IS3 deletion arrested Tk-subtilisin folding at an intermediate state, in which the central nucleus was formed, but the subsequent folding propagation into terminal subdomains did not occur. Alanine substitution of the aspartate residue in IS3 disturbed the intraloop hydrogen-bonding network, as evidenced by crystallographic analysis, resulting in compromised folding at high temperatures. Taking into account the high conservation of IS3 across hyperthermophilic homologues, we propose that the presence of IS3 is important for folding of hyperthermophilic subtilisins in high-temperature environments.