RESUMEN
Independent or joint control over the amplitude and phase of the complex field by phase-only modulation element is crucial in numerous applications. Existing modulation methods can realize high levels of accuracy but are accompanied by noticeable losses in light-usage efficiency. Here a cascaded modulation method is proposed for the generation of arbitrary complex fields with high efficiency and high fidelity. This approach is based on a gradient descent optimization algorithm that minimizes a customized cost function. The major advantage of our approach over existing modulation methods is that the efficiency is significantly enhanced while ensuring high modulation accuracy. For the generation of Laguerre-Gaussian mode (LG01), with similar high accuracy, the efficiency by our approach can reach 79.5%, which is enhanced by 192% compared with the theoretical maximum efficiency of 41.5% [Opt. Express25, 11692 (2017)10.1364/OE.25.011692]. Furthermore, the efficiency of existing modulation methods deteriorates rapidly as the target field turns more intricate, whereas in our approach it maintains at a relatively high level. The field generation fidelity and energy efficiency of the proposed cascaded modulation method are compared with that of several different single-pass modulation methods in generating a series of typical Hermite-Gaussian and Laguerre-Gaussian modes and an amplitude-only "OSA" pattern. Our proposed method features both high efficiency and high accuracy in the simulation and experiment, which may be of growing interest to applications such as optical manipulation or quantum communication.
RESUMEN
Optical soliton molecules exhibiting behaviors analogous to matter molecules have been the hotspot in the dissipative system for decades. Based on the dispersion Fourier transformation technique, the real-time spectral interferometry has become the popular method to reveal the internal dynamics of soliton molecules. The rising degrees of freedom in pace with the increased constitutes of soliton molecules yield more intriguing sights into the internal motions. Yet the soliton molecules with three or more pulses are rarely investigated owing to the exponentially growing complexity. Here, we present both experimental and theoretical studies on the soliton molecules containing three solitons. Different assemblies of the constitutes are categorized as different types of soliton triplet akin to the geometric isomer, including equally-spaced triplet and unequally-spaced triplet. Typical soliton triplets with different dynamics including regular internal motions, hybrid phase dynamics and complex dynamics involving separation evolution are experimentally analyzed and theoretically simulated. Specifically, the energy difference which remains elusive in experiments are uncovered through the simulation of diverse triplets with plentiful dynamics. Moreover, the multi-dimensional interaction space is proposed to visualize the internal motions in connection with the energy exchange, which play significant roles in the interplays among the solitons. Both the experimental and numerical simulations on the isomeric soliton triplets would release a larger number of degrees of freedom and motivate the potentially artificial configuration of soliton molecules for various ultrafast applications, such as all-optical buffering and multiple encoding for telecommunications.
RESUMEN
We investigate the polarization dynamics of vector solitons in a fiber laser mode-locked by a saturable absorber (SA). Three types of vector solitons were obtained in the laser, including group velocity locked vector solitons (GVLVS), polarization locked vector solitons (PLVS), and polarization rotation locked vector solitons (PRLVS). Their polarization evolution during intracavity propagation is discussed. Pure vector solitons are obtained from the continuous wave (CW) background by soliton distillation, and the characteristics of the vector solitons without and with distillation are analyzed, respectively. Numerical simulations suggest that the features of vector solitons in a fiber laser could be assemble to those generated in fibers.
RESUMEN
Phase evolution of soliton and that of first-order sidebands in a fiber laser are investigated by using nonlinear Fourier transform (NFT). Development from dip-type sidebands to peak-type (Kelly) sidebands is presented. The phase relationship between the soliton and the sidebands calculated by the NFT are in good agreement with the average soliton theory. Our results suggest that NFT can be an effective tool for the analysis of laser pulses.
RESUMEN
We report an efficient method to generate arbitrary three-dimensional (3D) parallel multifoci inside a material. Taking into account the numerical aperture of the objective lens and the refractive index of the material, the Ewald cap was modified with a longer radius, then the whole 3D intensity distribution inside the material could be calculated using only a single Fourier transform (FT). By introducing the adaptive weight coefficient, the uniformity of the 3D multifoci improves from 81.3% to 98.9%. By adjusting the axial resolution of the Ewald cap, the uniformity of the axial multifoci improves from 85.9% to 99.7%. In the experiment, we have realized one-dimensional (1D), 2D, and 3D structures inside the fused silica, which are in excellent agreement with the simulation results. The experimental results of the "H-U-S-T" structure demonstrate that customized arbitrary intensity distribution inside the material can be realized.
RESUMEN
Using blue laser diodes (LDs) to pump Pr:YLF crystals can directly realize visible-band laser output. Compared with the traditional frequency doubling and LD direct output method, it has the advantages of simple design, compact structure, and high beam quality. For solid-state lasers, pump-induced thermal effects of gain media are the principal limiting factors for the desired high-power output. In this paper, internal temperature space model distribution of a rectangular cross-section Pr:YLF crystal is established. On this basis, the temperature distribution, thermal stress distribution, and thermal focal length variation of single-end pumped and double-end pumped laser crystals are analyzed. The results are verified by COMSOL simulations and experimental measurements. To our knowledge, this analysis is the first to examine the thermal effect of a rectangular cross-section Pr:YLF crystal, analyzing the limit power that the crystal can withstand, which paves the way for better performances of visible lasers with stable and high-power output.
RESUMEN
Recent developments in blue diode lasers have been hindered by the challenge of balancing high power with beam quality. Typically, high-power blue diode lasers exhibit low beam quality due to the output of multiple longitudinal and lateral modes. A promising solution to this problem is to control and shape the blue beam mode output from a single emitter. To achieve this, it is key to have full knowledge of the properties of the output mode under various conditions. In this paper, we explore the mode characteristics of an InGaN single-emitter laser diode that has a typical wavelength of 447 nm (wavelength range: 440-455 nm). We measure and analyze the near-field mode using the box model, finding that the near-field mode excited by the blue diode laser overlapped near the threshold current of 0.32 A. The p=2 order lateral mode of longitudinal mode groups 3 and 4 overlapped with the p=4 order mode of adjacent longitudinal mode groups. Through a Fourier transform of the near-field mode, we obtain the far-field mode and reveal a spatial law of mode distribution that is similar to the near-field mode. As the current is gradually increased and approaches the rated current of the laser diode, the near-field mode continuously has new longitudinal mode groups added to the long-wavelength side of the starting group. We observe an increase in the number of longitudinal mode groups and high-order lateral modes, leading to more mode overlaps. Additionally, we observe a gradual shift in the peak energy of the modes to the long-wavelength side. This study reveals the mode characteristics of broad-area blue diode lasers, providing crucial information to achieve high-quality laser beams in such systems.
RESUMEN
Polarization properties of a soliton generated in a fiber laser of zero dispersion are investigated. Similar to the solitons generated in a fiber laser of all anomalous dispersion, the polarization ellipse of the soliton rotated during pulse evolution inside the cavity. The number of rotations relies on the cavity averaged birefringence with nonlinear bias. The larger the cavity averaged birefringence is, the bigger the bias is. When the period multiplying of solitons appears, the number of rotations depends on both multiplying periods and the cavity averaged birefringence. Multiple polarization states can be observed at a fixed position in the cavity depending on the multiplying period. When the cavity length is equal to n times of the averaged beat length, the polarization ellipse of the soliton rotates n∗m times at a fixed position, where m is equal to the multiplying period.
RESUMEN
Transition from a gain-guided soliton (GGS) to a fully developed noise-like pulse (NLP) is numerically demonstrated in fiber lasers operated in the normal dispersion regime, which explains well the experimental observation of spectrum evolution that the bottom of the averaged spectrum gradually broadens with pump power increasing. Numerical results suggest that the transition could also happen under the condition of cavity linear phase delay bias change with fixed pump power. It is demonstrated that the peak power clamping effect and the normal dispersion are the key factors leading to the spectrum evolution. In addition, intermittent meta-stable states between GGS and NLP can be obtained when the cavity dispersion is chosen at small normal dispersion.
RESUMEN
Laser stealth dicing can realize material separation with negligible surface damage, but severe aberrations in thick materials degrade processing quality. This Letter presents a nonlinear point-to-point transformation method combined with spherical aberration compensation to achieve aberration-free axial multi-focus beams. The focus peak intensity increases 7 times at a depth of 0.5 mm after spherical aberration compensation, and reaches 44 times at 3.5 mm. Spherical aberration compensation experiments showed that the width of the heat-affected zone remains almost unchanged at different depths inside the glass, and stealth dicing experiments for 1-mm-thick glass demonstrated that aberration-free 1-focus, 2-foci, and 3-foci stealth dicing can be successfully realized.
RESUMEN
Spectral beam combining (SBC) of laser diodes has been proven to be an effective method to improve beam brightness. The crosstalk between different emitters in the SBC system will significantly affect the beam-combining efficiency and output beam properties without effective control. The interfering factors of the crosstalk beam intensity in semiconductor laser SBC have been theoretically analyzed, and experiments have been built to carry out the SBC of a semiconductor laser bar with a high filling factor of 80%. It is found that by adding an inverted Kepler telescope, reducing the focal length of the transmission lens or increasing the spacing of the grating and the output coupling mirror, the crosstalk can be suppressed. In an experiment of beam combining with five emitters, the ratio of the first-order crosstalk peak energy to that of the central beam spot is about 0.34 when the spacing of the grating and the output coupling mirror is 50 mm and the focal length of the transmission lens is 200 mm. The ratio decreases to 0.035 when the spacing of the grating and the output coupling mirror is 200 mm. With the addition of an inverted Kepler telescope with a magnification of 2, the ratio decreases to 0.085. In addition, the ratio decreases to 0.07 when the focal length of the transmission lens is 80 mm.
RESUMEN
We report a simple and effective approach for designing resonators with high brightness and high mode discrimination based on optimizing the single-mode power factor of the fundamental mode, which represents the total power extracted by the fundamental mode from the gain medium. By optimizing the single-mode power factor of the fundamental mode, the cavity can be designed to operate in mono-mode, increasing mode purity and improving brightness significantly. Our method is verified on a digital laser with a spatial light modulator as the rear mirror, and the loaded phase profile is acquired by a simulated annealing algorithm. As a result, the optimized resonator with a Fresnel number of 7.2 operates in a single fundamental mode, and the brightness of the output beam yields 240% and 276% improvement, compared with conventional plane-plane and plane-concave resonators, respectively. This approach is ready to be applied to more sophisticated mode selection and may serve as a general method for designing cavities with high efficiency and high brightness.
RESUMEN
Axial light distribution modulation is widely applied in optical tweezers, hard-brittle material cutting, multilayer laser direct writing, etc. To generate arbitrary axial light distribution, the coordinate-transformation iteration (CTI) algorithm is presented. The CTI algorithm unifies equations in low and high numerical aperture (NA) scenarios, using the same iterative algorithm to produce phase computer-generated holograms. In a low NA scenario, twin-foci, flattop, and sin2 distributions have been achieved. In high NA scenarios, multirings, multifoci, and needle-like distributions have been realized in simulation with specific polarized incident beams. Since the CTI algorithm is inherently an efficient one-dimensional phase retrieval algorithm that is not limited by NA, this method has the potential to become a well-received solution for axial light distribution modulation.
RESUMEN
Carbon fiber reinforced polymer (CFRP) has been widely used in the aerospace industry and other fields, but its processing is still subject to many restrictions. A femtosecond laser helical drilling device is proposed. It can realize beam deflection and translation through a scanning galvanometer and a pair of lenses, respectively, and finally obtain the effect of beam oblique focusing. With the combination of a spiral scanning path and focus feed, the non-taper and high-quality drilling of materials can be realized. CFRP materials were processed through this method, and the influences of process parameters on the heat affected zone and machining taper were studied. The distribution and influence degree of the heat affected zone and the formation mechanism of the machining taper were analyzed. Finally, a high-quality straight hole processing effect of CFRP with up to a 9.7: 1 aspect ratio, less than 15 µm heat affected zone outside the hole, and no delamination in the hole was realized. This new drilling method is expected to further expand CFRP applications.
RESUMEN
Spectral beam combining is an important way to improve the brightness of semiconductor laser beams. For a spectral beam combining system, crosstalk between different emitters would cause the deterioration of beam quality and the reduction of beam combining efficiency, especially for the laser diode bar with a high fill factor. In this paper, an analysis model of the spectral beam combining system with crosstalk is established. The most important advantage of this model is that it can analyze the spectral distribution of the combined beam and also give a relatively good estimation for the beam quality parameters, such as beam size and far-field divergence angle. This model is verified by the experimental results. Furthermore, based on the theoretical model, a method for eliminating crosstalk is developed. By introducing a spatial filter inside the grating external cavity, the crosstalk between different emitters is blocked in the far field, and the beam quality is improved. In the experiment of beam combining of five emitters, after crosstalk is eliminated, the divergence angle of the combined laser beam is reduced from 10.09 to 4.73 mrad, the beam parameter product is reduced from 2.95 to 0.91 mmâ mrad, and the power of the main lobe is improved from 1.77 to 2 W.
RESUMEN
Period doubling (PD) and the merging of multiple dissipative-soliton-resonance (DSR) pulses are investigated in a fiber laser. Depending on the initial conditions and operation settings, various PDs of multiple DSR pulses are achieved. For two coexisting DSR pulses, we observe PD on both pulses or PD on a single pulse while the other pulse maintains period one. For three coexisting DSR pulses, PD on all pulses or PD on one/two pulse(s) are achieved when the other pulses maintain period one. It is observed that excessively increasing the pump power could destroy the PD behavior. Within certain parameters, PD behavior can be maintained by increasing the pump power. Apart from the appearance of PD, it is found that two DSR pulses may merge into a single DSR pulse if the pulse interval is small enough during pump power increase.
RESUMEN
Rapid progress in real-time spectroscopy uncovers the spatio-spectral scenarios of ultrashort pulses in dissipative systems. Varieties of transient soliton dynamics on different timescales have been revealed. Here, we report on an experimental observation of stationary and pulsating vector dissipative solitons in a nonlinear multimode interference (NL-MMI) based fiber laser with net normal dispersion. Polarization non-discrimination of the NL-MMI mode-locking facilitates the dissipative soliton trapping process. Two orthogonally polarized components are coupled together through oppositely shifting their central frequencies to form the group-velocity-locked vector dissipative solitons (GVLVDSs). Dispersive Fourier transform (DFT) based polarization resolved measurement enables insights into the transient polarization dynamics and the long-term evolution. Particularly, both stationary and pulsating GVLVDSs are obtained with appropriate parameter settings. It is found that the quasi-stationary pulsating manner is accompanied with recurrent spectral breathing and energy oscillation; the two orthogonally polarized components possess synchronous pulsating manners due to the cross-phase modulation induced trapping mechanism and the similar formation process. Additionally, chaotic pulsation is also captured in sense that the spectra cannot recover to their original profiles despite of the harmonic energy oscillation. All these findings can enhance our understanding towards soliton pulsation with the freedom of vectorial degree.
RESUMEN
Recent progress in real-time spectral interferometry enables access to the internal dynamics of optical multisoliton complexes. Here, we report on the first, to the best of our knowledge, experimental observation of shaking soliton molecules by means of the dispersive Fourier transform technique. Beyond the simplex vibrating soliton pairs, multiple oscillatory motions can jointly involve in the internal dynamics, reminiscent of the shaking soliton pairs. Both quasi-periodically and chaotically evolving phase oscillations are approached in the sense of different oscillatory frequencies. In addition, the shaking soliton pair combined with sliding phase dynamics is also observed, and is interpreted as the superposition of two different internal motions. All of these results shed new light on the internal dynamics of soliton molecules with higher degrees of freedom, as well as enrich the framework toward multisoliton complexes.
RESUMEN
As a long-wavelength laser with strong energy storage capacity and large scale of amplification, the CO2 laser is considered an effective amplifier in the next-generation picosecond terawatt infrared laser system, but the pulse splitting effect caused by its discrete gain spectrum limits its behavior. In this paper, we have developed a specific model of a CO2 amplifier, which is optically and electrically pumped at the same time. The model is based on gas discharge that is combined with photon absorption, temperature, and wave equation. The proposed hybrid pumped CO2 amplifier scheme can increase the gain proportion of the sequence band transition (0002-1001, 0003-1002, etc.) from 12% to nearly 50% of the regular band and broaden the bandwidth of each line by over 15.8% by the overlap of the sequence band and regular band. The relative energy concentration of the first subpulse can be increased by up to 190% when the amplification factor reaches 103. The study on the model of a picosecond CO2 amplifier with electrical and optical pumping may contribute to the amplification of an ultrafast mid-infrared pulse to the terawatt or higher region.
RESUMEN
There has been recent interest in diode pumped metastable rare gas lasers (DPRGLs) and their scaling to higher powers, due to the advantages of excellent beam quality and high quantum efficiency. In this paper, a cw diode pumped rare gas amplifier (DPRGA) with single-pass longitudinally pumped configuration is studied theoretically based on master oscillator and power amplifier (MOPA). A five-level kinetic model of DPRGAs is first established. Then, the influences of gain medium density, pump and seed laser intensities and gain length on DPRGA performance are simulated and analyzed. The results of numerical simulation agree well with those of Rawlins et al.'s experiment. With the best set of working parameters, the amplification factor reaches 22.18 dB, at pump intensity of 50 kW/cm2 and seed laser intensity of 100 W/cm2. Parameter optimization is helpful for design of a relatively high-power DPRGL system.