Rheological design of thickened alcohol-based hand rubs.

The handleability and sensory perception of hand sanitisers by consumers affect the hygiene outcome. Spillage may result in under-dosing and poor sensory properties can lead to under-utilisation. We first propose four principles (low runoff, spreadability, smoothness and non-stickiness) for designing the rheology of thickened alcohol-based hand rubs with acceptable handleability and hand feel. We then evaluate a commercial hand gel and a variety of simplified formulations thickened with microgels (Carbopol 974P, Carbopol Ultrez 20 and Sepimax Zen), or linear polymers (Jaguar HP 120 COS), and evaluate them against these design criteria. All four additives provide acceptable spreadability by shear thinning to η ≈ 10 - 1 Pa s at γ ˙ ∼ 10 3 s - 1 . Either the finite yield stress conferred by the microgels ( σ y ≳ 10 Pa ) or the increase in low-shear viscosity provided by the linear polymer ( η ≳ 1 Pa s at γ ˙ ≲ 0.1 s - 1 ) give rise to acceptably low runoff. However, the formulation using the linear polymer shows a filament breakage time of τ b ≈ 1 s in capillary rheology, which may result in stickiness and therefore a less than optimal hand feel.

Surface pressure of liquid interfaces laden with micron-sized particles.

We consider the surface pressure of a colloid-laden liquid interface. As micron-sized particles of suitable wettability can be irreversibly bound to the liquid interface on experimental timescales, we use the canonical ensemble to derive an expression for the surface pressure of a colloid-laden interface. We use this expression to show that adsorption of particles with only hard-core interactions has a negligible effect on surface pressures from typical Langmuir-trough measurements. Moreover, we show that Langmuir-trough measurements cannot be used to extract typical interparticle potentials. Finally, in the case of relatively weakly interacting sterically stabilized particles at a liquid interface, we argue that the dependence of measured surface pressure on surface fraction can be explained by particle coordination number at low to intermediate particle surface fractions. At high surface fractions, where the particles are jammed and cannot easily rearrange, we argue that contact-line sliding and/or deformations of the liquid interface at the length scale of the particles might play a pivotal role.

Soft matter science and the COVID-19 pandemic.

Much of the science underpinning the global response to the COVID-19 pandemic lies in the soft matter domain. Coronaviruses are composite particles with a core of nucleic acids complexed to proteins surrounded by a protein-studded lipid bilayer shell. A dominant route for transmission is via air-borne aerosols and droplets. Viral interaction with polymeric body fluids, particularly mucus, and cell membranes controls their infectivity, while their interaction with skin and artificial surfaces underpins cleaning and disinfection and the efficacy of masks and other personal protective equipment. The global response to COVID-19 has highlighted gaps in the soft matter knowledge base. We survey these gaps, especially as pertaining to the transmission of the disease, and suggest questions that can (and need to) be tackled, both in response to COVID-19 and to better prepare for future viral pandemics.

Interfacial Rheology of Sterically Stabilized Colloids at Liquid Interfaces and Its Effect on the Stability of Pickering Emulsions.

Particle-laden interfaces can be used to stabilize a variety of high-interface systems, from foams over emulsions to polymer blends. The relation between the particle interactions, the structure and rheology of the interface, and the stability of the system remains unclear. In the present work, we experimentally investigate how micron-sized, near-hard-sphere-like particles affect the mechanical properties of liquid interfaces. In particular, by comparing dried and undried samples, we investigate the effect of aggregation state on the properties of the particle-laden liquid interface and its relation to the stability of the corresponding Pickering emulsions. Partially aggregated suspensions give rise to a soft-solid-like response under shear, whereas for stable PMMA particulate layers a liquid-like behavior is observed. For interfacial creep-recovery measurements, we present an empirical method to correct for the combined effect of the subphase drag and the compliance of the double-wall ring geometry, which makes a significant contribution to the apparent elasticity of weak interfaces. We further demonstrate that both undried and dried PMMA particles can stabilize emulsions for months, dispelling the notion that particle aggregation, in bulk or at the interface, is required to create stable Pickering emulsions. Our results indicate that shear rheology is a sensitive probe of colloidal interactions but is not necessarily a predictor of the stability of interfaces, e.g., in quiescent Pickering emulsions, as in the latter the response to dilatational deformations can be of prime importance.

Quantitative morphological characterization of bicontinuous Pickering emulsions via interfacial curvatures.

Bicontinuous Pickering emulsions (bijels) are a physically interesting class of soft materials with many potential applications including catalysis, microfluidics and tissue engineering. They are created by arresting the spinodal decomposition of a partially-miscible liquid with a (jammed) layer of interfacial colloids. Porosity L (average interfacial separation) of the bijel is controlled by varying the radius (r) and volume fraction (ϕ) of the colloids (L∝r/ϕ). However, to optimize the bijel structure with respect to other parameters, e.g. quench rate, characterizing by L alone is insufficient. Hence, we have used confocal microscopy and X-ray CT to characterize a range of bijels in terms of local and area-averaged interfacial curvatures; we further demonstrate that bijels are bicontinuous using an image-analysis technique known as 'region growing'. In addition, the curvatures of bijels have been monitored as a function of time, which has revealed an intriguing evolution up to 60 minutes after bijel formation, contrary to previous understanding.

Compressing a spinodal surface at fixed area: bijels in a centrifuge.

Bicontinuous interfacially jammed emulsion gels (bijels) are solid-stabilised emulsions with two inter-penetrating continuous phases. Employing the method of centrifugal compression we find that macroscopically the bijel yields at relatively low angular acceleration. Both continuous phases escape from the top of the structure, making any compression immediately irreversible. Microscopically, the bijel becomes anisotropic with the domains aligned perpendicular to the compression direction which inhibits further liquid expulsion; this contrasts strongly with the sedimentation behaviour of colloidal gels. The original structure can, however, be preserved close to the top of the sample and thus the change to an anisotropic structure suggests internal yielding. Any air bubbles trapped in the bijel are found to aid compression by forming channels aligned parallel to the compression direction which provide a route for liquid to escape.

Versatile strategy for homogeneous drying patterns of dispersed particles.

After spilling coffee, a tell-tale stain is left by the drying droplet. This universal phenomenon, known as the coffee ring effect, is observed independent of the dispersed material. However, for many technological processes such as coating techniques and ink-jet printing a uniform particle deposition is required and the coffee ring effect is a major drawback. Here, we present a simple and versatile strategy to achieve homogeneous drying patterns using surface-modified particle dispersions. High-molecular weight surface-active polymers that physisorb onto the particle surfaces provide enhanced steric stabilization and prevent accumulation and pinning at the droplet edge. In addition, in the absence of free polymer in the dispersion, the surface modification strongly enhances the particle adsorption to the air/liquid interface, where they experience a thermal Marangoni backflow towards the apex of the drop, leading to uniform particle deposition after drying. The method is independent of particle shape and applicable to a variety of commercial pigment particles and different dispersion media, demonstrating the practicality of this work for everyday processes.

Hindered coarsening of a phase-separating microemulsion due to dispersed colloidal particles.

The addition of sterically stabilized colloidal particles to a phase-separating microemulsion leads to dramatic changes in its demixing behavior, especially during the later stages. Our microemulsion is composed of reverse micelles of sodium dodecyl sulfate, pentanol, and water in a dodecane continuous phase which separates into micelle-rich and micelle-poor phases above a lower critical solution temperature. The poly(methyl methacrylate) particles preferentially partition into the less structured, micelle-poor phase. Nucleation of the minority phase or spinodal decomposition close to criticality continue to occur in the presence of particles, albeit with pronounced pretransitional clustering of particles when the micelle-poor phase is in the minority. The coalescence of micelle-poor droplets and the coarsening of micelle-rich domains are both strongly modified due to the presence of colloidal particles. We use our observations of the early stages of phase separation to understand these late stage changes.

Electrostatic potential between charged particles at an oil-water interface.

Electrostatic interactions between point charges embedded into interfaces separating dielectric media are omnipresent in soft matter systems and often control their stability. Such interactions are typically complicated and do not resemble their bulk counterparts. For instance, the electrostatic potential of a point charge at an air-water interface falls off as r^{-3}, where r is the distance from the charge, exhibiting a dipolar behavior. This behavior is often assumed to be generic, and is widely referred to when interpreting experimental results. Here we explicitly calculate the in-plane potential of a point charge at an interface between two electrolyte solutions with different, finite dielectric permittivities and Debye screening lengths, such as oil and water. We show that the asymptotic behavior of this potential is neither a dipole, which characterizes the potential at air-water interfaces, nor a screened monopole, which describes the bulk behavior in a single electrolyte solution. By considering the same problem in arbitrary dimensions, we find that the physics behind this difference can be traced to the asymmetric propagation of the interaction in the two media. Our results should be relevant to understand the effective potential acting between interfacial proteins in biofilms, and the self-assembly of charged colloids at droplet surfaces in oil-water emulsions.

Particle-stabilized Janus emulsions that exhibit pH-tunable stability.

By developing a deeper understanding of the formation mechanism and the origin of the stability, we report a simple and large-scale fabrication approach to create Janus emulsions that can be controlled in size, geometry and stability.

Emulsification in binary liquids containing colloidal particles: a structure-factor analysis.

We present a quantitative confocal-microscopy study of the transient and final microstructure of particle-stabilized emulsions formed via demixing in a binary liquid. To this end, we have developed an image-analysis method that relies on structure factors obtained from discrete Fourier transforms of individual frames in confocal image sequences. Radially averaging the squared modulus of these Fourier transforms before peak fitting allows extraction of dominant length scales over the entire temperature range of the quench. Our procedure even yields information just after droplet nucleation, when the (fluorescence) contrast between the two separating phases is scarcely discernible in the images. We find that our emulsions are stabilized on experimental timescales by interfacial particles and that they are likely to have bimodal droplet-size distributions. We attribute the latter to coalescence together with creaming being the main coarsening mechanism during the late stages of emulsification and we support this claim with (direct) confocal-microscopy observations. In addition, our results imply that the observed droplets emerge from particle-promoted nucleation, possibly followed by a free-growth regime. Finally, we argue that creaming strongly affects droplet growth during the early stages of emulsification. Future investigations could clarify the link between quench conditions and resulting microstructure, paving the way for tailor-made particle-stabilized emulsions from binary liquids.

Self-assembly route for photonic crystals with a bandgap in the visible region.

Three-dimensional photonic crystals, or periodic materials, that do not allow the propagation of photons in all directions with a wavelength in the visible region have not been experimentally fabricated, despite there being several potential structures and the interesting applications and physics that this would lead to. We show using computer simulations that two structures that would enable a bandgap in the visible region, diamond and pyrochlore, can be self-assembled in one crystal structure from a binary colloidal dispersion. In our approach, these two structures are obtained as the large (Mg) and small (Cu) sphere components of the colloidal analogue of the MgCu(2) Laves phase, whose growth can be selected and directed using appropriate wall patterning. The method requires that the particles consist of different materials, so that one of them can be removed selectively after drying (for example, by burning or dissolution). Photonic calculations show that gaps appear at relatively low frequencies indicating that they are robust and open for modest contrast, enabling fabrication from more materials.