Unlocking the Potential of Liquid Plasma Polymer Films: Characterizing Aging Effects and Their Impact on the Wrinkling Phenomenon.

Here, we present the study of the intricate dynamics between the physicochemical properties of liquid propanethiol plasma polymer films (PPFs) and the formation of wrinkles in PPF/Al bilayers. The study investigates the effect of liquid PPF aging in the air before top Al layer deposition by magnetron sputtering on the wrinkling phenomenon for 4 days. Thanks to atomic force microscopy, the wrinkle dimensions were found to decrease by approximately 55% in amplitude and 66% in wavelength, correlated with an increase in the viscosity of the PPF over the aging duration (i.e., from less than 107 to 1010 Pa·s). This behavior is not linked to alterations in cross-linking degree as evidenced by time-of-flight secondary ion mass spectrometry experiments but rather to network densification driven by the inherent molecular chain mobility due to the viscous state of the PPF. X-ray photoelectron spectroscopy measurements emphasizing the absence of oxidation of the PPF over the aging duration support this, revealing a unique aging mechanism distinct from other plasma polymer families. Overall, this study offers valuable insights into the design and application of mechanically responsive PPFs involved in bilayer systems, paving the way for advancements in nanotechnology and related fields.

K1 capsule-dependent phage-driven evolution in Escherichia coli leading to phage resistance and biofilm production.

AIMS: Understanding bacterial phage resistance mechanisms has implications for developing phage-based therapies. This study aimed to explore the development of phage resistance in Escherichia coli K1 isolates' to K1-ULINTec4, a K1-dependent bacteriophage. METHODS AND RESULTS: Resistant colonies were isolated from two different strains (APEC 45 and C5), both previously exposed to K1-ULINTec4. Genome analysis and several parameters were assessed, including growth capacity, phage adsorption, phenotypic impact at capsular level, biofilm production, and virulence in the in vivo Galleria mellonella larvae model. One out of the six resistant isolates exhibited a significantly slower growth rate, suggesting the presence of a resistance mechanism altering its fitness. Comparative genomic analysis revealed insertion sequences in the region 2 of the kps gene cluster involved in the capsule biosynthesis. In addition, an immunoassay targeting the K1 capsule showed a very low positive reaction compared to the control. Nevertheless, microscopic images of resistant strains revealed the presence of capsules with a clustered organization of bacterial cells and biofilm assessment showed an increased biofilm production compared to the sensitive strains. In the G. mellonella model, larvae infected with phage-resistant isolates showed better survival rates than larvae infected with phage-sensitive strains. CONCLUSIONS: A phage resistance mechanism was identified at the genomic level and had a negative impact on the K1 capsule production. The resistant isolates showed an increased biofilm production and a decreased virulence in vivo.

Exploring the presence, genomic traits, and pathogenic potential of extended-spectrum ß-lactamase Escherichia coli in freshwater, wastewater, and hospital effluents.

AIMS: The purpose of this work was to study extended-spectrum ß-lactamase (ESBL)-producing Escherichia coli (ESBL-EC) in freshwaters, hospital effluents, and wastewaters during two sampling campaigns in 2021. METHODS AND RESULTS: Water sampling was performed at 24 stations in the Ourthe watershed in Belgium. A total of 644 ESBL (n = 642) and AmpC (n = 2) E. coli strains were isolated. Disk-diffusion assays were performed following the EUCAST's recommendations. All strains were tested for the presence of blaCTX-M-1, blaCTX-M-2, and blaCTX-M-9 gene groups by PCR. Genes belonging to blaCTX-M-1 and blaCTX-M-9 groups were detected, respectively, in 73.6% and 14.9% of the strains. No blaCTX-M-2 group's gene was found. A subset of strains (n = 40) was selected for whole genome sequencing. Escherichia coli serotype O18: H7 ST 1463 was predominant (n = 14) in the sequenced strains and showed pathogenicity in the Galleria mellonella larvae model. ß-lactamase genes identified were blaCTX-M (n = 21), with blaCTX-M-15 mostly represented (n = 15), as well as blaTEM (n = 11), blaOXA (n = 7), blaSHV (n = 9), and carbapenemase (CP) genes were observed in several strains-blaKPC-3 (n = 19), blaNDM-1 (n = 1), blaVIM-1 (n = 2), and blaOXA-244 (n = 2)-even from freshwaters. CONCLUSIONS: ESBL-EC are widely distributed in the aquatic environment in Belgium and contain a variety of ESBL and CP genes.

Development of Nanobodies as Theranostic Agents against CMY-2-Like Class C ß-Lactamases.

Three soluble single-domain fragments derived from the unique variable region of camelid heavy-chain antibodies (VHHs) against the CMY-2 ß-lactamase behaved as inhibitors. The structure of the complex VHH cAbCMY-2(254)/CMY-2 showed that the epitope is close to the active site and that the CDR3 of the VHH protrudes into the catalytic site. The ß-lactamase inhibition pattern followed a mixed profile with a predominant noncompetitive component. The three isolated VHHs recognized overlapping epitopes since they behaved as competitive binders. Our study identified a binding site that can be targeted by a new class of ß-lactamase inhibitors designed on the sequence of the paratope. Furthermore, the use of mono- or bivalent VHH and rabbit polyclonal anti-CMY-2 antibodies enables the development of the first generation of enzyme-linked immunosorbent assay (ELISA) for the detection of CMY-2 produced by CMY-2-expressing bacteria, irrespective of resistotype.

Designing Nanostructured Organic-Based Material by Combining Plasma Polymerization and the Wrinkling Approach.

In this work, an innovative and versatile strategy for the fabrication of nanostructured organic thin films is established based on the wrinkling phenomenon taking place in a bilayer system constituted by a liquid plasma polymer film (PPF) and a top Al coating. By means of morphological characterization (i.e., atomic force microscopy and scanning electron microscopy), it has been demonstrated that the wrinkle dimensions (i.e., wavelength and amplitude) evolve as a function of the PPF thickness according to models established for conventional polymers. The wrinkled surfaces exhibit great stability over time as their dimension did not vary after 100 days of aging, resulting from a pinning phenomenon between the Al layer and the Si substrate, hence freezing the morphology. In a second step, the wrinkled surfaces have been employed as templates for the deposition of an additional PPF third layer, giving rise to the formation of a nanostructured organic-based surface. The chemical composition of the material can be tuned through an appropriate choice of precursor (i.e., allyl alcohol or propanethiol).

Phage Targeting Neonatal Meningitis E. coli K1 In Vitro in the Intestinal Microbiota of Pregnant Donors and Impact on Bacterial Populations.

Escherichia coli K1 is a leading cause of neonatal meningitis. The asymptomatic carriage of these strains in the maternal intestinal microbiota constitutes a risk of vertical transmission to the infant at birth. The aim of this work was to evaluate the efficacy of phage therapy against E. coli K1 in an intestinal environment and its impact on the intestinal microbiota. For this purpose, three independent experiments were conducted on the SHIME® system, the first one with only the phage vB_EcoP_K1_ULINTec4, the second experiment with only E. coli K1 and the last experiment with both E. coli K1 and the phage. Microbiota monitoring was performed using metagenetics, qPCR, SCFA analysis and the induction of AhR. The results showed that phage vB_EcoP_K1_ULINTec4, inoculated alone, was progressively cleared by the system and replicates in the presence of its host. E. coli K1 persisted in the microbiota but decreased in the presence of the phage. The impact on the microbiota was revealed to be donor dependent, and the bacterial populations were not dramatically affected by vB_K1_ULINTec4, either alone or with its host. In conclusion, these experiments showed that the phage was able to infect the E. coli K1 in the system but did not completely eliminate the bacterial load.

Investigating the relationship between the mechanical properties of plasma polymer-like thin films and their glass transition temperature.

This work aims at understanding the influence of the substrate temperature (Ts) on the viscoelastic properties of propanethiol plasma polymer films (PPFs). By means of state-of-the-art AFM characterization-based techniques including peak force quantitative nanomechanical mapping (PFQNM), nano dynamic mechanical analysis (nDMA) and "scratch" experiments, it has been demonstrated that the mechanical behaviour of PPFs is dramatically affected by the thermal conditions of the substrate. Indeed, the material behaves from a high viscous liquid (i.e. viscosity ∼ 106 Pa s) to a viscoelastic solid (loss modulus ∼ 1.17 GPa, storage modulus ∼ 1.61 GPa) and finally to an elastic solid (loss modulus ∼ 1.95 GPa, storage modulus ∼ 8.51 GPa) when increasing Ts from 10 to 45 °C. This behaviour is ascribed to an increase in the surface glass transition temperature of the polymeric network. The latter has been correlated with the chemical composition through the presence of unbound molecules acting as plasticizers and the cross-linking density of the layers. In a second step, this knowledge is exploited for the fabrication of a nanopattern by generating surface instabilities in the propanethiol PPF/Al bilayer system.

Surface Engineering of Bromine-Based Plasma Polymer Films: A Step toward High Thiol Density Containing Organic Coatings.

Nowadays, the development of synthetic methods regarding the fabrication of -SH containing organic coatings continues to attract a considerable attention. Among the potential techniques, the plasma polymerization appears as one of the most promising method but the difficulty to control the chemical composition of the layers is highly limiting. In this context, in this work, we report on an original method combining dry and wet chemistry approaches in view of selectively incorporating -SH functions in organic coatings. Our strategy is based on the (i) synthesis of a bromine-containing plasma polymer film, followed by (ii) a selective grafting of dithiol-based molecule on C-Br bond. Investigating the plasma polymerization process has revealed that, in our experimental window, the load of energy in the discharge has little influence on the chemical composition as well as on the cross-linking degree of the layers. This behavior is explained by considering the concomitant influence of the gas-phase reactions and the supply of energy to the growing film through ion bombardment. With regard to the functionalization strategy, based on comparative X-ray photoelectron spectroscopy measurements, it has been unambiguously demonstrated that a selective reaction between propanedithiol and the C-Br bond acting as the reactive center takes place resulting in the removing of the bromine atom and the incorporation of -SH groups in the PPF. Depending on the grafting reaction duration, the relative proportion of carbon bearing the -SH group is found to evolve from 4 to 6%. On the other hand, the dissolution of unbounded bromine-based species in the liquid medium during the grafting procedure is also evidenced. The whole set of our results clearly demonstrates the attractiveness of our strategy paving the way for new development in the fabrication of -SH-rich-containing organic thin films.

Enteropathogenic Escherichia coli O80:H2 in Young Calves with Diarrhea, Belgium.

Serogroup O80 was detected in 40% of 104 enteropathogenic Escherichia coli isolates from calves with diarrhea from 42 farms in Belgium during 2008‒2015. These isolates harbored the eae-ξ and fliCH2 genes, similar to the O80 attaching-effacing Shigatoxigenic E. coli isolates found in humans in France. This strain might be emerging.

Meeting Report of the Second Symposium of the Belgian Society for Viruses of Microbes and Launch of the Phage Valley.

The second symposium of the Belgian Society for Viruses of Microbes (BSVoM) took place on 8 September 2023 at the University of Liège with 141 participants from 10 countries. The meeting program covered three thematic sessions opened by international keynote speakers: two sessions were devoted to "Fundamental research in phage ecology and biology" and the third one to the "Present and future applications of phages". During this one day symposium, four invited keynote lectures, nine selected talks and eight student pitches were given along with thirty presented posters. The president of the Belgian Society for Viruses of Microbes, Prof. Yves Briers, took advantage of this symposium to launch the Phage Valley concept that will put the spotlight on the exceptionally high density of researchers investigating viruses of microbes as well as the successful triple helix approach between academia, industry and government in Belgium.

Establishment of a derivatization method to quantify thiol function in sulfur-containing plasma polymer films.

Thiol-supported surfaces draw more and more interest in numerous fields of applications from biotechnology to catalysis. Among the various strategies to generate such surfaces, the plasma polymerization of a thiol-containing molecule appears to be one of the ideal candidates. Nevertheless, considering such an approach, a careful characterization of the material surface chemistry is necessary. In this work, an original chemical derivatization method aiming to quantitatively probe the -SH functions in plasma polymers was established using N-ethylmaleimide as a labeling molecule. The method was qualitatively and quantitatively validated on self-assembled monolayers of 3-mercaptopropyltrimethoxysilane exhibiting a -SH-terminated group used as "model" surface. For a quantitative determination of the -SH content in propanethiol plasma polymers, the kinetics of the reaction was investigated. The latter is described as a two-step mechanism, namely a fast surface reaction followed by a diffusion-limited one. The density of -SH groups deduced from the derivatization method (~4%) is in good agreement with typical values measured in some other plasma polymer families. The whole set of our data opens up new possibilities for optimizing the -SH content in thiol-based plasma polymer films.

Combining physical vapor deposition structuration with dealloying for the creation of a highly efficient SERS platform.

Nanostructured noble metal thin films are highly studied for their interesting plasmonic properties. The latter can be effectively used for the detection of small and highly diluted molecules by the surface-enhanced Raman scattering (SERS) effect. Regardless of impressive detection limits achieved, synthesis complexity and the high cost of gold restrict its use in devices. Here, we report on a novel two-step approach that combines the deposition of a silver-aluminum thin film with dealloying to design and fabricate efficient SERS platforms. The magnetron sputtering technique was used for the deposition of the alloy thin film to be dealloyed. After dealloying, the resulting silver nanoporous structures revealed two degrees of porosity: macroporosity, associated to the initial alloy morphology, and nanoporosity, related to the dealloying step. The resulting nanoporous columnar structure was finely optimized by tuning deposition (i.e., the alloy chemical composition) and dealloying (i.e., dealloying media) parameters to reach the best SERS properties. These are reported for samples dealloyed in HCl and with 30 atom % of silver at the initial state with a detection limit down to 10-10 mol·L-1 for a solution of rhodamine B.

Escherichia coli O80 in Healthy Cattle: Absence of Shigatoxigenic and Enteropathogenic E. coli O80:H2 and (Phylo) Genomics of Non-Clonal Complex 165 E. coli O80.

The origin of human and calf infections by Shigatoxigenic (STEC) and enteropathogenic (EPEC) Escherichia coli O80:H2 is still unknown. The aim of this study was to identify E. coli O80 in healthy cattle with an emphasis on melibiose non-fermenting E. coli O80:H2. Faecal materials collected from 149 bulls at 1 slaughterhouse and 194 cows on 9 farms were tested with O80 antigen-encoding gene PCR after overnight growth in enrichment broths. The 53 O80 PCR-positive broths were streaked on different (semi-)selective agar plates. Five E. coli colonies from 3 bulls and 11 from 2 cows tested positive with the O80 PCR, but no melibiose non-fermenting E. coli was isolated. However, these 16 E. coli O80 were negative with PCR targeting the fliCH2, eae, stx1, stx2 and hlyF genes and were identified by WGS to serotypes and sequence types O80:H6/ST8619 and O80:H45/ST4175. They were phylogenetically related to E. coli O80:H6 and O80:H45 isolated from different animal species in different countries, respectively, but neither to STEC and EPEC O80:H2/ST301, nor to other serotypes of the clonal complex 165. As a conclusion, healthy adult cattle were not identified as a source of contamination of humans and calves by STEC or EPEC O80:H2.

Virulence of Shigatoxigenic and Enteropathogenic Escherichia coli O80:H2 in Galleria mellonella Larvae: Comparison of the Roles of the pS88 Plasmids and STX2d Phage.

The invasiveness properties of Shigatoxigenic and enteropathogenic Escherichia coli (STEC and EPEC) O80:H2 in humans and calves are encoded by genes located on a pS88-like ColV conjugative plasmid. The main objectives of this study in larvae of the Galleria mellonella moth were therefore to compare the virulence of eight bovine STEC and EPEC O80:H2, of two E. coli pS88 plasmid transconjugant and STX2d phage transductant K12 DH10B, of four E. coli O80:non-H2, and of the laboratory E. coli K12 DH10B strains. Thirty larvae per strain were inoculated in the last proleg with 10 µL of tenfold dilutions of each bacterial culture corresponding to 10 to 106 colony-forming units (CFUs). The larvae were kept at 37 °C and their mortality rate was followed daily for four days. The main results were that: (i) not only the STEC and EPEC O80:H2, but also different E. coli O80:non-H2 were lethal for the larvae at high concentrations (from 104 to 106 CFU) with some variation according to the strain; (ii) the Stx2d toxin and partially the pS88 plasmid were responsible for the lethality caused by the E. coli O80:H2; (iii) the virulence factors of E. coli O80:non-H2 were not identified. The general conclusions are that, although the Galleria mellonella larvae represent a useful first-line model to study the virulence of bacterial pathogens, they are more limited in identifying their actual virulence properties.

Eudragit® FS Microparticles Containing Bacteriophages, Prepared by Spray-Drying for Oral Administration.

Phage therapy is recognized to be a promising alternative to fight antibiotic-resistant infections. In the quest for oral dosage forms containing bacteriophages, the utilization of colonic-release Eudragit® derivatives has shown potential in shielding bacteriophages from the challenges encountered within the gastrointestinal tract, such as fluctuating pH levels and the presence of digestive enzymes. Consequently, this study aimed to develop targeted oral delivery systems for bacteriophages, specifically focusing on colon delivery and employing Eudragit® FS30D as the excipient. The bacteriophage model used was LUZ19. An optimized formulation was established to not only preserve the activity of LUZ19 during the manufacturing process but also ensure its protection from highly acidic conditions. Flowability assessments were conducted for both capsule filling and tableting processes. Furthermore, the viability of the bacteriophages remained unaffected by the tableting process. Additionally, the release of LUZ19 from the developed system was evaluated using the Simulator of the Human Intestinal Microbial Ecosystem (SHIME®) model. Finally, stability studies demonstrated that the powder remained stable for at least 6 months when stored at +5 °C.

In Vitro Effect on Piglet Gut Microbiota and In Vivo Assessment of Newly Isolated Bacteriophages against F18 Enterotoxigenic Escherichia coli (ETEC).

Enterotoxigenic Escherichia coli (ETEC) causing post-weaning diarrhea (PWD) in piglets have a detrimental impact on animal health and economy in pig production. ETEC strains can adhere to the host's small intestinal epithelial cells using fimbriae such as F4 and F18. Phage therapy could represent an interesting alternative to antimicrobial resistance against ETEC infections. In this study, four bacteriophages, named vB_EcoS_ULIM2, vB_EcoM_ULIM3, vB_EcoM_ULIM8 and vB_EcoM_ULIM9, were isolated against an O8:F18 E. coli strain (A-I-210) and selected based on their host range. These phages were characterized in vitro, showing a lytic activity over a pH (4-10) and temperature (25-45 °C) range. According to genomic analysis, these bacteriophages belong to the Caudoviricetes class. No gene related to lysogeny was identified. The in vivo Galleria mellonella larvae model suggested the therapeutic potential of one selected phage, vB_EcoS_ULIM2, with a statistically significant increase in survival compared to non-treated larvae. To assess the effect of this phage on the piglet gut microbiota, vB_EcoS_ULIM2 was inoculated in a static model simulating the piglet intestinal microbial ecosystem for 72 h. This study shows that this phage replicates efficiently both in vitro and in vivo in a Galleria mellonella model and reveals the safety of the phage-based treatment on the piglet microbiota.

Impact Assessment of vB_KpnP_K1-ULIP33 Bacteriophage on the Human Gut Microbiota Using a Dynamic In Vitro Model.

New control methods are needed to counter antimicrobial resistances and the use of bacteriophages as an alternative treatment seems promising. To that end, the effect of the phage vB_KpnP_K1-ULIP33, whose host is the hypervirulent Klebsiella pneumoniae SA12 (ST23 and capsular type K1), was assessed on intestinal microbiota, using an in vitro model: the SHIME® system (Simulator of the Human Intestinal Microbial Ecosystem). After stabilization of the system, the phage was inoculated for 7 days and its persistence in the different colons was studied until its disappearance from the system. The concentration of short chain fatty acids in the colons showed good colonization of the bioreactors by the microbiota and no significant effect related to the phage treatment. Diversity (α and ß), the relative abundance of bacteria, and qPCR analysis targeting different genera of interest showed no significant variation following phage administration. Even if further in vitro studies are needed to assess the efficacy of this phage against its bacterial host within the human intestinal ecosystem, the phage ULIP33 exerted no significant change on the global colonic microbiota.

Identification of staphylococcal cassette chromosome mec in Staphylococcus aureus and non-aureus staphylococci from dairy cattle in Belgium: Comparison of multiplex PCR and whole genome sequencing.

The present study compared multiplex PCR (mPCR) and Whole Genome Sequencing (WGS) using the SCCmecFinder database to identify the Staphylococcal Cassette Chromosome (SCC) mec in five Staphylococcus aureus (SA) and nine non-aureus staphylococci (NAS) isolated from dairy cattle. mPCR identified an SCCmecIV in four SA and one NAS, but could not differentiate between SCCmecII and IV in the fifth SA, that all harbored the mecA gene and were phenotypically resistant to cefoxitin. SCCmecFinder confirmed the presence of an SCCmecIVc(2B) in four SA and of the SCCmecIVa(2B) in the fifth SA and the one NAS. Both methods also detected one untypeable SCCmec in another cefoxitin-resistant NAS harboring the mecA gene and a pseudo SCCmec in one cefoxitin-sensitive NAS harboring one mecC-related gene. No SCCmec elements were identified either in one cefoxitin-sensitive NAS harboring the mecA2 gene, or in five NAS (one resistant and four sensitive to cefoxitin) harboring the mecA1 gene. SCCmecFinder could even not identify the presence of any mecA1 gene in these five NAS, whose presence was nevertheless confirmed by ResFinder. The conclusions of this study are: (i) mPCR and WGS sequencing using SCCmecFinder are complementary methodologies to identify SCCmec; (ii) SCCmecFinder and ResFinder to a lesser extent cannot identify all mec gene allotypes; (iii) a specific classification of the SCCmec in NAS would be epidemiologically helpful; (iv) presence of a mecA gene and a complete SCCmec is linked to cefoxitin resistance, whereas presence of other mec genes and of pseudo or no SCCmec is not.

Foundation of the Belgian Society for Viruses of Microbes and Meeting Report of Its Inaugural Symposium.

The Belgian Society for Viruses of Microbes (BSVoM) was founded on 9 June 2022 to capture and enhance the collaborative spirit among the expanding community of microbial virus researchers in Belgium. The sixteen founders are affiliated to fourteen different research entities across academia, industry and government. Its inaugural symposium was held on 23 September 2022 in the Thermotechnical Institute at KU Leuven. The meeting program covered three thematic sessions launched by international keynote speakers: (1) virus-host interactions, (2) viral ecology, evolution and diversity and (3) present and future applications. During the one-day symposium, four invited keynote lectures, ten selected talks and eight student pitches were given along with 41 presented posters. The meeting hosted 155 participants from twelve countries.

Systematic Review of the Key Factors Influencing the Indoor Airborne Spread of SARS-CoV-2.

The COVID-19 pandemic due to the Severe Acute Respiratory Syndrome Coronavirus 2 (SARS-CoV-2) has been plaguing the world since late 2019/early 2020 and has changed the way we function as a society, halting both economic and social activities worldwide. Classrooms, offices, restaurants, public transport, and other enclosed spaces that typically gather large groups of people indoors, and are considered focal points for the spread of the virus. For society to be able to go "back to normal", it is crucial to keep these places open and functioning. An understanding of the transmission modes occurring in these contexts is essential to set up effective infection control strategies. This understanding was made using a systematic review, according to the Preferred Reporting Items for Systematic reviews and Meta-Analyses statement (PRISMA) 2020 guidelines. We analyze the different parameters influencing airborne transmission indoors, the mathematical models proposed to understand it, and discuss how we can act on these parameters. Methods to judge infection risks through the analysis of the indoor air quality are described. Various mitigation measures are listed, and their efficiency, feasibility, and acceptability are ranked by a panel of experts in the field. Thus, effective ventilation procedures controlled by CO2-monitoring, continued mask wearing, and a strategic control of room occupancy, among other measures, are put forth to enable a safe return to these essential places.