Bilateral lunotriquetral coalition: a dynamic four-dimensional computed tomography technical case report.

Lunotriquetral coalitions are the most common form of carpal coalition wherein the cartilage between the lunate and triquetrum ossification centers failed to undergo apoptosis. This technical case report examines the arthrokinematics of bilateral lunotriquetral coalitions with dissimilar Minnaar types in one participant with one asymptomatic wrist and one wrist with suspected distal radioulnar joint injury. Static and dynamic (four-dimensional) CT images during pronosupination were captured using a photon-counting detector CT scanner. Interosseous proximity distributions were calculated between the lunotriquetral coalition and adjacent bones in both wrists to quantify arthrokinematics. Interosseous proximity distributions at joints adjacent to the lunotriquetral coalition demonstrate differences in median and minimum interosseous proximities between the asymptomatic and injured wrists during resisted pronosupination. Altered kinematics from lunotriquetral coalitions may be a source of ulnar-sided wrist pain and discomfort, limiting the functional range of motion. This case report highlights potential alterations to wrist arthrokinematics in the setting of lunotriquetral coalitions and possible associations with ulnar-sided wrist pain, highlighting anatomy to examine in radiographic follow-up. Furthermore, this case report demonstrates the technical feasibility of four-dimensional CT using photon-counting detector technology in assessing arthrokinematics in the setting of variant wrist anatomy.

The effect of fibrin formulation on cell migration in an in vitro tendon repair model.

BACKGROUND: The purpose of this study was to determine the effect of fibrinogen concentration on cell viability and migration in a tissue culture tendon healing model. METHODS: Forty-eight canine flexor digitorum profundus tendons were randomly divided into three groups. In each group the tendons were lacerated and repaired augmented with a canine bone marrow stromal cell seeded fibrin interposition patch using either 5 mg/ml fibrinogen and 25 U/ml thrombin (physiological as a control), 40 mg/ml fibrinogen and 250 U/ml thrombin (low adhesive), or 80 mg/ml fibrinogen and 250 U/ml thrombin (high adhesive). The sutured tendons were cultured for two or four weeks. RESULTS: Failure load was not significantly different among the groups. Cell-labeling staining showed that the stromal cells migrated across the gap in the control and low adhesive groups, but there was no cell migration in the high adhesive group at two weeks. CONCLUSION: A high fibrinogen concentration in a fibrin patch or glue may impede early cell migration. LEVEL OF EVIDENCE: Not applicable because this study was a laboratory study.

Shear wave elastography of the median nerve: A mechanical study.

BACKGROUND: Shear wave elastography (SWE) shows promise in peripheral neuropathy evaluation but has potential limitations due to tissue size and heterogeneity. We tested SWE sensitivity to elasticity change and the effect of probe position in a median nerve cadaver model. METHODS: Ten specimens were used to measure median nerve elasticity under increasing loads using SWE and indentation. Measurements were compared using repeated-measures analysis of variance. RESULTS: Indentation and SWE-based longitudinal nerve elasticity increased with tensile loading (P < .01), showing a similar relationship. Acquisition in a transverse plane showed lower values compared with longitudinal measurements, mostly under higher loads (P = .03), as did postdissection elasticity (P = .02). Elasticity did not change when measured proximal to the carpal tunnel. CONCLUSIONS: Longitudinal SWE is sensitive to changes in median nerve elasticity. Measuring elasticity of peripheral nerves noninvasively could elucidate intra-neural pathology related to compression neuropathies, and proof to be of added value as a diagnostic or prognostic tool.

Calculation of flexor pollicis longus moment arm for wrist motion in a cadaver model validates the tenodesis effect for therapy.

INTRODUCTION: Synergies of fingers and wrist motion have been incorporated into therapies for finger flexor tendon injuries to improve repair outcomes. Similar synergistic therapy strategies have not been well documented for the thumb. PURPOSE OF THE STUDY: The purpose of this study was to investigate the extent to which wrist motion enables a synergistic effect at the thumb in a cadaveric model by measuring flexor pollicis longus excursion and calculating the moment arm of this tendon at the wrist joint. STUDY DESIGN: This is a basic science research. METHODS: Eight fresh-frozen cadaveric arms were obtained from our anatomical bequest program. The proximal arm was fixed in neutral pronation/supination position, and motion of the wrist was guided through either flexion/extension or radial/ulnar deviation. Fingers were fixed in extension, thumb interphalangeal and metacarpophalangeal joints were fixed in neutral extension, and the carpometacarpal joint was fixed at 30° palmar abduction. The flexor pollicis longus tendon was exposed proximal to the wrist crease and connected to a rotary potentiometer to measure tendon excursion. Optical markers were attached to the hand to capture kinematics. Wrists were moved from a neutral position over the range of flexion and extension and then from the neutral position through the range of radial to ulnar deviation. Moment arms were calculated. RESULTS: Moment arm calculation indicated that the flexor pollicis longus acts as a wrist flexor over the entire motion range and as a weak radial deviator at ulnarly-deviated positions. CONCLUSIONS: This study provides a mechanistic rationale for passive interphalangeal joint motion in varying wrist positions when treating thumb flexor tendon injuries, with benefits seen primarily for wrist extension.

Ultrasound-guided hydrodissection decreases gliding resistance of the median nerve within the carpal tunnel.

INTRODUCTION: The aim of this study was to assess alterations in median nerve (MN) biomechanics within the carpal tunnel resulting from ultrasound-guided hydrodissection in a cadaveric model. METHODS: Twelve fresh frozen human cadaver hands were used. MN gliding resistance was measured at baseline and posthydrodissection, by pulling the nerve proximally and then returning it to the origin. Six specimens were treated with hydrodissection, and 6 were used as controls. RESULTS: In the hydrodissection group there was a significant reduction in mean peak gliding resistance of 92.9 ± 34.8 mN between baseline and immediately posthydrodissection (21.4% ± 10.5%; P = 0.001). No significant reduction between baseline and the second cycle occurred in the control group: 9.6 ± 29.8 mN (0.4% ± 5.3%; P = 0.467). DISCUSSION: Hydrodissection can decrease the gliding resistance of the MN within the carpal tunnel, at least in wrists unaffected by carpal tunnel syndrome. A clinical trial of hydrodissection seems justified. Muscle Nerve 57: 25-32, 2018.

Triamcinolone Acetonide affects TGF-ß signaling regulation of fibrosis in idiopathic carpal tunnel syndrome.

BACKGROUND: Fibroblast behavior and cell-matrix interactions of cells from normal and idiopathic carpal tunnel syndrome (CTS) subsynovial connective tissue (SSCT) with and without Triamcinolone Acetonide (TA) were compared in this study. A cell-seeded gel contraction model was applied to investigate the effect of steroid treatment on SSCT fibroblast gene expression and function. METHODS: SSCT cells were obtained from CTS patients and fresh cadavers. Cells were isolated by mechanical and collagenase digestion. Collagen gels (1 mg/ml) were prepared with SSCT cells (1 × 106/mL). A sterile Petri dish with a cloning ring in the center was prepared. The area between the ring and outer dish was filled with cell-seeded collagen solution and gelled for 1 h. The gel was released from the outer way of the petri dish to allow gel contraction. Cell seeded gels were treated with 10 M triamcinolone acetonide (TA) or vehicle (DMSO) in modified MEM. Every 4 h for 3 days the contracting gels were photographed and areas calculated. Duplicate contraction tests were performed with each specimen, and the averages were used in the analyses, which were conducted using two-factor analysis of variance in a generalized linear model framework utilizing generalized estimating equations (GEE) to account for the correlation between samples. The contraction rate was determined by the area change over time, and the decay time constant was calculated. A customized mechanical test system was used to determine gel stiffness and tensile strength. Gene expression was assessed using Human Fibrosis and Cell Motility PCR arrays. RESULTS: TA-treated gels had a significantly higher contraction rate, tensile strength and stiffness than the untreated gels. Proteinases involved in remodeling had increased expression in TA-treated gels of the patient group. Pro-fibrotic genes and ECM regulators, such as TGF-ß, collagens and integrins, were down-regulated by TA, indicating that TA may work in part by decreasing fibrotic gene expression. CONCLUSIONS: This study showed that TA affects cell-matrix interaction and suppresses fibrotic gene expression in the SSCT cells of CTS patients.

Turkey model for flexor tendon research: in vitro comparison of human, canine, turkey, and chicken tendons.

BACKGROUND: Flexor tendon injuries are one of the most common hand injuries and remain clinically challenging for functional restoration. Canine and chicken have been the most commonly used animal models for flexor tendon-related research but possess several disadvantages. The purpose of this study was to explore a potential turkey model for flexor tendon research. METHODS: The third digit from human cadaveric hands, canine forepaws, turkey foot, and chicken foot were used for this study. Six digits in each of four species were studied in detail, comparing anatomy of the flexor apparatus, joint range of motion tendon excursion, tendon cross-sectional area, work of flexion, gliding resistance at the level of the A2 pulley, modulus of elasticity, suture retention strength, and histology across species. RESULTS: Anatomically, the third digit in the four species displayed structural similarities; however, the tendon cross-sectional area of the turkey and human were similar and larger than canine and chicken. Furthermore, the turkey digit resembles the human's finger with the lack of webbing between digits, similar vascularization, tendon excursion, work of flexion, gliding resistance, mechanical properties, and suture holding strength. More importantly, human and turkey tendons were most similar in histological appearance. CONCLUSIONS: Turkey flexor tendons have many properties that are comparable to human flexor tendons which would provide a clinically relevant, economical, nonhuman companion large animal model for flexor tendon research.

Radiocapitellar contact characteristics during prosthetic radial head subluxation.

BACKGROUND: Metallic radial head prostheses are often used in the management of comminuted radial head fractures and elbow instability. We hypothesized that during radiocapitellar subluxation, the contact pressure characteristics of an anatomic radial head prosthesis will more closely mimic those of the native radial head compared with a monopolar circular or a bipolar circular radial head design. MATERIALS AND METHODS: With use of 6 fresh frozen cadaver elbows, mean radiocapitellar contact pressures, contact areas, and peak pressures of the native radial head were assessed at 0, 2, 4, and 6 mm of posterior subluxation. These assessments were repeated after the native radial head was replaced with anatomic, monopolar circular and bipolar circular prostheses. RESULTS: The joint contact pressures increased with the native and the prosthetic radial head subluxation. The mean contact pressures for the native radial head and anatomic prosthesis increased progressively and significantly from 0 to 6 mm of subluxation (native, 0.6 ± 0.0 MPa to 1.9 ± 0.2 MPa; anatomic, 0.7 ± 0.0 MPa to 2.1 ± 0.3 MPa; P < .0001). The contact pressures with the monopolar and bipolar prostheses were significantly higher at baseline and did not change significantly further with subluxation (monopolar, 2.0 ± 0.1 MPa to 2.2 ± 0.2 MPa [P = .31]; bipolar, 1.7 ± 0.1 MPa to 1.9 ± 0.1 MPa [P = .12]). The pattern of increase in contact pressures with the anatomic prosthesis mimicked that of the native radial head. Conversely, the circular prostheses started out with higher contact pressures that stayed elevated. CONCLUSION: The articular surface design of a radial head prosthesis is an important determinant of joint contact pressures.

Comparison of graft-reinforced repairs and suture repair using a novel biomechanical test.

INTRODUCTION AND HYPOTHESIS: The aim of this study was to determine the feasibility of a novel biomechanical test for evaluating mesh-reinforced repair compared to suture-reinforced repair using an animal model. We hypothesized that the fatigue life of a mesh reinforced repair would be greater than that of xenograft reinforced repair and suture-only repair. METHODS: Wistar rats were randomly assigned to undergo a ventral hernia repair using sutures or one of the three mesh materials representative of incorporation, encapsulation and resorption host responses (Gynemesh, Pelvisoft and Surgisis®, respectively). All surviving animals were killed at 90 days and specimens containing the prosthesis-tissue interface were exposed to cyclic forces. The number of cycles to failure (fatigue life) was compared between groups using a Cox regression model. RESULTS: Of 40 randomly assigned animals, 11 died before 90 days. After randomizing an additional 5 rats, a total of 34 rats were killed at 90 days. The proportions of specimens that failed before 10,000 cycles were 25% (2/8), 50% (4/8), 62.5% (5/8) and 70% (7/10) in the Gynemesh, Surgisis, Pelvisoft, and suture control groups, respectively. In addition, the median number of cycles to failure was >10,000 in the Gynemesh group, >6,923 in the Surgisis group, 1133 in the Pelvisoft group and 741 in the control group. After adjustment for cross-sectional area, the risk of failure in the suture control group was higher than in all of the reinforced repair groups combined with an adjusted hazard ratio of 2.58 (95% CI 0.96 - 6.97), and was statistically significantly higher than in the Gynemesh group with an adjusted hazard ratio of 6.67 (95% CI 1.30 - 34.48). CONCLUSION: We present a novel biomechanical test that can be used to compare mesh materials in an animal model prior to use in humans. In this animal model, after adjusting for cross-sectional area, suture reinforced repair has a higher risk of failure than graft reinforced repair.

PAPP-A affects tendon structure and mechanical properties.

Pregnancy-associated plasma protein-A (PAPP-A) serves to increase local insulin-like growth factor (IGF) stimulation of proliferation and differentiation in many tissues through proteolysis of inhibitory IGF-binding proteins. The purpose of this study was to investigate the effects of PAPP-A on tendon structure and mechanical properties. A total of 30 tails from 6-month-old mice were tested with 10 tails in each of following groups: PAPP-A knockout (KO), skeletal-specific PAPP-A overexpressing transgenic (Tg) and wild type (WT). Morphologically, the total tail cross-sectional area (CSA), individual tissue CSAs of bone, muscle and tendon, and fascicle diameter were measured. A fascicle pullout test was performed to assess stiffness and strength of interfascicular structures. Fascicles were mechanically characterized through low and high displacement rate uniaxial tension tests providing modulus at each rate, hysteresis area and stress relaxation ratio. The KO mice had a smaller total tail CSA (p<0.05), fascicle diameter (p<0.05), absolute tendon CSA (p<0.05), fast and slow stiffness (p<0.05 for both) and larger hysteresis area (p<0.05) compared to WT and Tg mice. On the other hand, the Tg mice had a larger fascicle diameter (p<0.05), absolute tendon CSA (p<0.05), higher interfascicular strength and stiffness (p<0.05) and lower fascicular modulus at low displacement rates (p<0.05) compared to WT and KO mice. Tg mice also had larger total tail CSA area (p<0.05) and smaller hysteresis area (p<0.05) than KO mice, and larger normalized tendon CSA (p<0.05) than WT mice. Based on these data, we conclude that PAPP-A affects fascicle structure, thereby affecting tendon phenotype.

The Effect of 1-Ethyl-3-(3-Dimethylaminopropyl) Carbodiimide Suture Coating on Tendon Repair Strength and Cell Viability in a Canine Model.

PURPOSE: To determine if impregnating a suture with a cross-linking agent, 1-ethyl-3-(3-dimethylaminopropyl) carbodiimide hydrochloride (EDC), improved suture pull-out strength and cell viability. METHODS: Canine flexor digitorum profundus tendons were cut in canine zone D, and a single suture loop was placed in each end, with sutures soaked in either saline or an EDC solution with a concentration of 1%, 10%, or 50%. Suture pull-out strength, stiffness, and elongation to failure was determined by pulling the loop until failure. Cytotoxicity of the EDC treatment was evaluated by suspending treated sutures over cultured tenocytes. RESULTS: Mechanical properties for the EDC-treated side were improved over controls when treated with the 10% and 50% EDC solutions. The ratio of dead to live cells was significantly increased at all distances from the suture for the 50% EDC-treated group. CONCLUSIONS: Suture treated with a 10% EDC solution provided the best combination of mechanical reinforcement and limited toxicity. CLINICAL RELEVANCE: Sutures so treated may improve the ability of a tendon repair to sustain early mobilization.

The effect of capitellar impaction fractures on radiocapitellar stability.

PURPOSE: To determine the effect of capitellar impaction fractures on radiocapitellar stability in a model that simulated a terrible triad injury. METHODS: Six cadaveric elbows were dissected free of skin and muscles. Tendons were preserved. The lateral collateral ligament was released and repaired (surgical control). Two sizes of capitellar impaction defects were created. After lateral collateral ligament release and repair, we then sequentially created osseous components of a terrible triad injury (partial radial head resection and coronoid fracture) through an olecranon osteotomy that was fixed with a plate. Radiocapitellar stability was recorded after the creation of each new condition. RESULTS: Significantly less force was required for radiocapitellar subluxation after the creation of 20° and 40° capitellar defects compared with the surgical control (intact capitellum). After the addition of a Mason type II radial head defect and then a coronoid defect, stability decreased significantly further. CONCLUSIONS: Impaction fractures of the distal portion of the capitellum may contribute to a loss of radiocapitellar stability, particularly in an elbow fracture-dislocation. CLINICAL RELEVANCE: Because these injuries may be unrecognized, consideration should be given to diagnosing and addressing them.

Iliac bone grafting of the intact glenoid improves shoulder stability with optimal graft positioning.

BACKGROUND: Bone grafting procedures are increasingly popular for the treatment of anterior shoulder instability. In patients with a high risk of recurrence, open coracoid transplantation is preferred but can be technically demanding. Free bone graft glenoid augmentation may be an alternative strategy for high-risk patients without significant glenoid bone loss. This biomechanical cadaveric study assessed the stabilizing effect of free iliac crest bone grafting of the intact glenoid and the importance of sagittal graft position. METHODS: Eight fresh frozen cadaveric shoulders were tested. The bone graft was fixed on the glenoid neck at 3 sagittal positions (50%, 75%, and 100% below the glenoid equator). Displacement and reaction force were monitored with a custom device while translating the humeral head over the glenoid surface in both anterior and anteroinferior direction. RESULTS: Peak force (PF) increased significantly from the standard labral repair to the grafted conditions in both anterior (14.7 ± 5.5 N vs 27.3 ± 6.9 N) and anteroinferior translation (22.0 ± 5.3 N vs 29.3 ± 6.9 N). PF was significantly higher for the grafts at the 50% and 75% positions compared with the grafts 100% below the equator with anterior translation. Anteroinferior translation resulted in significantly higher values for the 100% and 75% positions compared with the 50% position. CONCLUSIONS: This biomechanical study confirms improved anterior glenohumeral stability after iliac crest bone graft augmentation of the anterior glenoid. The results also demonstrate the importance of bone graft position in the sagittal plane, with the ideal position determined by the direction of dislocation.

Effect of wrist and interphalangeal thumb movement on zone T2 flexor pollicis longus tendon tension in a human cadaver model.

INTRODUCTION: Therapy after flexor pollicis longus (FPL) repair typically mimics finger flexor management, but this ignores anatomic and biomechanical features unique to the FPL. PURPOSE OF THE STUDY: We measured FPL tendon tension in zone T2 to identify biomechanically appropriate exercises for mobilizing the FPL. METHODS: Eight human cadaver hands were studied to identify motions that generated enough force to achieve FPL movement without exceeding hypothetical suture strength. RESULTS: With the carpometacarpal and metacarpophalangeal joints blocked, appropriate forces were produced for both passive interphalangeal (IP) motion with 30° wrist extension and simulated active IP flexion from 0° to 35° with the wrist in the neutral position. DISCUSSION: This work provides a biomechanical basis for safely and effectively mobilizing the zone T2 FPL tendon. CONCLUSION: Our cadaver study suggests that it is safe and effective to perform early passive and active exercise to an isolated IP joint. LEVEL OF EVIDENCE: NA.

Lumbar trabecular bone mineral density distribution in patients with and without vertebral fractures: a case-control study.

PURPOSE: The proportion of load transmitted through the lumbar neural arch increases with aging, spinal degeneration, and lordosis, effectively shielding the lumbar vertebral bodies from load. This stress shielding may contribute to bone loss in the vertebral body, leading to increased fracture risk. To test his hypothesis, we performed a study to determine if vertebral body fractures were associated with a higher neural arch/vertebral body volumetric bone mineral density (vBMD) ratio. METHODS: Trabecular vBMD was calculated by quantitative CT in the L3 vertebral body and neural arch (pars interarticularis) of 36 women with vertebral compression fractures and 39 controls. Neural arch/vertebral body vBMD ratio was calculated, and its relationship to fracture status was determined using linear regression models adjusted for age and body mass index. RESULTS: Vertebral body trabecular vBMD was lower in fracture cases as compared to controls (mean ± SD, 49.0 ± 36.0 vs. 87.5 ± 36.8 mg/cm(3), respectively; P < 0.001), whereas trabecular vBMD of the neural arch was similar (96.1 ± 57.6 in cases vs. 118.2 ± 57.4 mg/cm(3) in controls; P = 0.182). The neural arch/vertebral body vBMD ratio was significantly greater in the fracture group than in controls (2.31 ± 1.07 vs. 1.44 ± 0.57, respectively; P < 0.001). CONCLUSION: These results support the hypothesis that stress shielding is a contributor to vertebral body bone loss and may increase fracture risk. Although further studies are needed, there may be a role for interventions that can shift vertebral loading in the spine to help prevent fracture.

CORR® ORS Richard A. Brand Award for Outstanding Orthopaedic Research: Engineering flexor tendon repair with lubricant, cells, and cytokines in a canine model.

BACKGROUND: Adhesions and poor healing are complications of flexor tendon repair. QUESTIONS/PURPOSES: The purpose of this study was to investigate a tissue engineering approach to improve functional outcomes after flexor tendon repair in a canine model. METHODS: Flexor digitorum profundus tendons were lacerated and repaired in 60 dogs that were followed for 10, 21, or 42 days. One randomly selected repair from either the second or fifth digit in one paw in each dog was treated with carbodiimide-derivatized hyaluronic acid, gelatin, and lubricin plus autologous bone marrow stromal cells stimulated with growth and differentiation factor 5; control repair tendons were not treated. Digits were analyzed by adhesion score, work of flexion, tendon-pulley friction, failure force, and histology. RESULTS: In the control group, 35 of 52 control tendons had adhesions, whereas 19 of 49 treated tendons had adhesions. The number of repaired tendons with adhesions in the control group was greater than the number in the treated group at all three times (p = 0.005). The normalized work of flexion in treated tendons was 0.28 (± 0.08), 0.29 (± 0.19), and 0.32 (± 0.22) N/mm/° at Day 10, Day 21, and Day 42 respectively, compared with the untreated tendons of 0.46 (± 0.19) at Day 10 (effect size, 1.5; p = 0.01), 0.77 (± 0.49) at Day 21 (effect size, 1.4; p < 0.001), and 1.17 (± 0.82) N/mm/° at Day 42 (effect size, 1.6; p < 0.001). The friction data were comparable to the work of flexion data at all times. The repaired tendon failure force in the untreated group at 42 days was 70.2 N (± 8.77), which was greater than the treated tendons 44.7 N (± 8.53) (effect size, 1.9; p < 0.001). Histologically, treated repairs had a smooth surface with intrinsic healing, whereas control repairs had surface adhesions and extrinsic healing. CONCLUSIONS: Our study provides evidence that tissue engineering coupled with restoration of tendon gliding can improve the quality of tendon healing in a large animal in vivo model. CLINICAL RELEVANCE: Tissue engineering may enhance intrinsic tendon healing and thus improve the functional outcomes of flexor tendon repair.

A comparative study of the effects of growth and differentiation factor 5 on muscle-derived stem cells and bone marrow stromal cells in an in vitro tendon healing model.

PURPOSE: To investigate the ability of muscle-derived stem cells (MDSCs) supplemented with growth and differentiation factor-5 (GDF-5) to improve tendon healing compared with bone marrow stromal cells (BMSCs) in an in vitro tendon culture model. METHODS: Eighty canine flexor digitorum profundus tendons were assigned into 5 groups: repaired tendon (1) without gel patch interposition (no cell group), (2) with BMSC-seeded gel patch interposition (BMSC group), (3) with MDSC-seeded gel patch interposition (MDSC group), (4) with GDF-5-treated BMSC-seeded gel patch interposition (BMSC+GDF-5 group), and (5) with GDF-5-treated MDSC-seeded gel patch interposition (MDSC+GDF-5 group). After culturing for 2 or 4 weeks, the failure strength of the healing tendons was measured. The tendons were also evaluated histologically. RESULTS: The failure strength of the repaired tendon in the MDSC+GDF-5 group was significantly higher than that of the non-cell and BMSC groups. The stiffness of the repaired tendons in the MDSC+GDF-5 group was significantly higher than that of the non-cell group. Histologically, the implanted cells became incorporated into the original tendon in all 4 cell-seeded groups. CONCLUSIONS: Interposition of a multilayered GDF-5 and MDSC-seeded collagen gel patch at the repair site enhanced tendon healing compared with a similar patch using BMSC. However, this increase in vitro was relatively small. In the clinical setting, differences between MDSC and BMSC may not be substantially different, and it remains to be shown that such methods might enhance the results of an uncomplicated tendon repair clinically. CLINICAL RELEVANCE: Muscle-derived stem cell implantation and administration of GDF-5 may improve the outcome of tendon repair.

Influence of radial head prosthetic design on radiocapitellar joint contact mechanics.

HYPOTHESIS: Our aim was to test whether anatomically designed metallic radial head implants could better reproduce native radiocapitellar contact pressure and areas than nonanatomic implants. METHODS: The distal humerus and proximal radius from 6 cadaveric upper extremities were serially tested in supination with 100 N of compression force at 4 angles of flexion (0°, 30°, 60°, and 90°). By use of a thin flexible pressure transducer, contact pressures and areas were measured for the native radial head, an anatomic implant, a nonanatomic circular monopolar implant, and a bipolar nonanatomic implant. The data (mean contact pressure and mean contact area) were modeled using a 2-factor repeated-measures analysis of variance with P ≤ .05 considered to be significant. RESULTS: The mean contact areas for the prosthetic radial heads were significantly less than those seen with the intact radial heads at every angle tested (P < .01). The mean contact pressures increased significantly with all prosthetic radial head types as compared with the native head. The mean contact pressures increased by 29% with the anatomic prosthesis, 230% with the monopolar prosthesis, and 220% with the bipolar prosthesis. Peak pressures of more than 5 MPa were more commonly observed with both the monopolar and bipolar prostheses than with the anatomic or native radial heads. CONCLUSIONS: The geometry of radial head implants strongly influences their contact characteristics. In a direct radius-to-capitellum axial loading experiment, an anatomically designed radial head prosthesis had lower and more evenly distributed contact pressures than the nonanatomic implants that were tested.

Relationship Between the Changes of Tendon Elastic Moduli With Ultrasound Shear Wave Elastography and Mechanical Compression Test.

OBJECTIVE: The purpose of this study was to investigate the consistency of the changes in the elastic modulus measured with ultrasound shear wave elastography (SWE) with changes measured through mechanical testing using tendons that were artificially altered by chemical modifications. METHODS: Thirty-six canine flexor digitorum profundus tendons were used for this experiment. To mimic tendon mechanical property changes induced by tendinopathy conditions, tendons were treated with collagenase to soften the tissue by collagen digestion or with 1-ethyl-3-(3-dimethylaminopropyl)carbodiimide hydrochloride (EDC) to stiffen the tissues through chemical crosslinking. Tendons were randomly assigned to one of three groups: immersion in phosphate-buffered saline (PBS) as a control group (n = 12), collagenase treatment (n = 12) or EDC treatment (n = 12). Immediately following SWE measurement of each tendon, mechanical compression testing was performed as a gold standard to validate the SWE measurement. Both tests were conducted before and after treatment. RESULTS: The compressive modulus and SWE shear modulus significantly decreased after collagenase treatment. Conversely, both moduli significantly increased after EDC treatment. There was no significant difference in either modulus before or after PBS treatment. As a result of a regression analysis with the percentage change of the compressive modulus as the dependent variable and SWE shear modulus as the independent variable, the best-fit regression was found to be an exponential function and the coefficient of determination was 0.687. CONCLUSION: The changes in the compressive moduli and SWE shear moduli in tendons induced by chemical treatments were correlated by approximately 70%.

Detection of scapholunate interosseous ligament injury using dynamic computed tomography-derived arthrokinematics: A prospective clinical trial.

Scapholunate interosseous ligament injuries are a major cause of wrist instability and can be difficult to diagnose radiographically. To improve early diagnosis of scapholunate ligament injuries, we compared injury detection between bilateral routine clinical radiographs, static CT, and dynamic four-dimensional CT (4DCT) during wrist flexion-extension and radioulnar deviation. Participants with unilateral scapholunate ligament injuries were recruited to a prospective clinical trial investigating the diagnostic utility of 4DCT imaging for ligamentous wrist injury. Twenty-one participants underwent arthroscopic surgery to confirm scapholunate ligament injury. Arthrokinematics, defined as distributions of interosseous proximities across radioscaphoid and scapholunate articular surfaces at different positions within the motion cycle, were used as CT-derived biomarkers. Preoperative radiographs, static CT, and extrema of 4DCT were compared between uninjured and injured wrists using Wilcoxon signed rank or Kolmogorov-Smirnov tests. Median interosseous proximities at the scapholunate interval were significantly greater in the injured versus the uninjured wrists at static-neutral and maximum flexion, extension, radial deviation, and ulnar deviation. Mean cumulative distribution functions at the radioscaphoid joint were not significantly different between wrists but were significantly shifted at the scapholunate interval towards increased interosseous proximities in injured versus uninjured wrists in all positions. Median and cumulative distribution scapholunate proximities from static-neutral and 4DCT-derived extrema reflect injury status.