Pyrazolate-Bridged NHC Cyclometalated [Pt2] Complexes and [Pt2Ag(PPh3)]+ Clusters in Electroluminescent Devices.

The ionic transition metal complexes (iTMCs) [{Pt(C∧C*)(µ-Rpz)}2Ag(PPh3)]X (HC∧C* = 1-(4-(ethoxycarbonyl)phenyl)-3-methyl-1H-imidazole-2-ylidene, X = ClO4/PF6; Rpz = pz 1a/2a, 4-Mepz 1b/2b, and 3,5-dppz 1c/2c) were prepared from the neutral [{Pt(C∧C*)(µ-Rpz)}2] (Rpz = pz A, 4-Mepz B, and 3,5-dppz C) and fully characterized. The "Ag(PPh3)" fragment is in between the two square-planar platinum units in an "open book" disposition and bonded through two Pt-Ag donor-acceptor bonds, as shown by X-ray diffraction (dPt-Ag ∼ 2.78 Å, 1a-1c). 195Pt{1H} and 31P{1H} NMR confirmed that these solid-state structures remain in solution. Photoluminescence studies and theoretical calculations on 1a, were performed. The diphenylpyrazolate derivatives show the highest photoluminescence quantum yield (PLQY) in the solid state. Therefore, 2c and its neutral precursor C were selected as active materials on light-emitting devices. OLEDs fabricated with C showed a turn-on voltage of 3.2 V, a luminance peak of 21,357 cd m-2 at 13 V, and a peak current efficiency of 28.8 cd A-1 (9.5% EQE). They showed a lifetime t50 of 15.7 h. OLEDs using 2c showed a maximum luminance of 114 cd m-2, while LECs exhibited a maximum luminance of 20 cd m-2 and a current efficiency of around 0.2 cd A-1, with a t50 value of 50 min.

Ionic multiresonant thermally activated delayed fluorescence emitters for light emitting electrochemical cells.

We designed and synthesized two new ionic thermally activated delayed fluorescent (TADF) emitters that are charged analogues of a known multiresonant TADF (MR-TADF) compound, DiKTa. The emission of the charged derivatives is red-shifted compared to the parent compound. For instance, DiKTa-OBuIm emits in the green (λPL = 499 nm, 1 wt % in mCP) while DiKTa-DPA-OBuIm emits in the red (λPL = 577 nm, 1 wt % in mCP). In 1 wt % mCP films, both emitters showed good photoluminescence quantum yields of 71% and 61%, and delayed lifetimes of 316.6 µs and 241.7 µs, respectively, for DiKTa-OBuIm and DiKTa-DPA-OBuIm, leading to reverse intersystem crossing rates of 2.85 × 103 s-1 and 3.04 × 103 s-1. Light-emitting electrochemical cells were prepared using both DiKTa-OBuIm and DiKTa-DPA-OBuIm as active emitters showing green (λmax = 534 nm) and red (λmax = 656 nm) emission, respectively.

Active control of plasmonic colors: emerging display technologies.

In recent years there has been a growing interest in the use of plasmonic nanostructures for color generation, a technology that dates back to ancient times. Plasmonic structural colors have several attractive features but once the structures are prepared the colors are normally fixed. Lately, several concepts have emerged for actively tuning the colors, which opens up for many new potential applications, the most obvious being novel color displays. In this review we summarize recent progress in active control of plasmonic colors and evaluate them with respect to performance criteria for color displays. It is suggested that actively controlled plasmonic colors are generally less interesting for emissive displays but could be useful for new types of electrochromic devices relying on ambient light (electronic paper). Furthermore, there are several other potential applications such as images to be revealed on demand and colorimetric sensors.

Thermoplasmonic Semitransparent Nanohole Electrodes.

Nonradiative decay of plasmons in metallic nanostructures offers unique means for light-to-heat conversion at the nanoscale. Typical thermoplasmonic systems utilize discrete particles, while metal nanohole arrays were instead considered suitable as heat sinks to reduce heating effects. By contrast, we show for the first time that under uniform broadband illumination (e.g., the sun) ultrathin plasmonic nanohole arrays can be highly competitive plasmonic heaters and provide significantly higher temperatures than analogous nanodisk arrays. Our plasmonic nanohole arrays also heat significantly more than nonstructured metal films, while simultaneously providing superior light transmission. Besides being efficient light-driven heat sources, these thin perforated gold films can simultaneously be used as electrodes. We used this feature to develop "plasmonic thermistors" for electrical monitoring of plasmon-induced temperature changes. The nanohole arrays provided temperature changes up to 7.5 K by simulated sunlight, which is very high compared to previously reported plasmonic systems under similar conditions (solar illumination and ambient conditions). Both temperatures and heating profiles quantitatively agree with combined optical and thermal simulations. Finally, we demonstrate the use of a thermoplasmonic nanohole electrode to power the first hybrid plasmonic ionic thermoelectric device, resulting in strong solar-induced heat gradients and corresponding thermoelectric voltages.

Solar Transparent Radiators by Optical Nanoantennas.

Architectural windows are a major cause of thermal discomfort as the inner glazing during cold days can be several degrees colder than the indoor air. Mitigating this, the indoor temperature has to be increased, leading to unavoidable thermal losses. Here we present solar thermal surfaces based on complex nanoplasmonic antennas that can raise the temperature of window glazing by up to 8 K upon solar irradiation while transmitting light with a color rendering index of 98.76. The nanoantennas are directional, can be tuned to absorb in different spectral ranges, and possess a structural integrity that is not substrate-dependent, and thus they open up for application on a broad range of surfaces.

Switchable Plasmonic Metasurfaces with High Chromaticity Containing Only Abundant Metals.

Plasmonic color generation offers several advantages but is also limited by the cost and availability of noble metals like gold. In this work, we present color-tunable metasurfaces with high chromaticity and reflectivity consisting of an aluminum mirror, a dielectric spacer, and a plasmonic nanohole array in copper. Copper is shown to be an excellent alternative to gold when properly protected from oxidation and makes it possible to generate a wide RGB gamut covering 27% of the standard RGB. By patterning the metasurfaces into microscale pixel triplets, color photos can be well reproduced with high resolution over wafer-sized areas. Further, we demonstrate active modulation of the reflected intensity using an electrochromic conductive polymer deposited on top of the nanostructures by screen printing. This technology opens up for ultrathin and flexible reflective displays in full color, that is, plasmonic electronic paper, compatible with large-scale sustainable production.

Operational mechanism of conjugated polyelectrolytes.

Conjugated polyelectrolytes (CPEs) are versatile materials used in a range of organic optoelectronic applications. Because of their ionic/electronic nature, characterizing these materials is nontrivial, and their operational mechanism is not fully understood. In this work we use a methodology that combines constant-voltage-driven current-density transient measurements with fast current vs voltage scans to allow decoupling of ionic and electronic phenomena. This technique is applied to diodes prepared with cationic CPEs having different charge-compensating anions. Our results indicate that the operational mechanism of these devices is governed by electrochemical doping of the CPE. On the basis of the notion that the saturated depletion layer for the anions consists of the same π-conjugated backbone material, we discern how the extent and speed of formation of the doped region depend on the anion structure. Apart from addressing fundamental transport questions, this work provides a tool for future characterization of different CPEs and other similar systems.

Universal transients in polymer and ionic transition metal complex light-emitting electrochemical cells.

Two types of light-emitting electrochemical cells (LECs) are commonly distinguished, the polymer-based LEC (p-LEC) and the ionic transition metal complex-based LEC (iTMC-LEC). Apart from marked differences in the active layer constituents, these LEC types typically show operational time scales that can differ by many orders of magnitude at room temperature. Here, we demonstrate that despite these differences p-LECs and iTMC-LECs show current, light output, and efficacy transients that follow a universal shape. Moreover, we conclude that the turn-on time of both LEC types is dominated by the ion conductivity because the turn-on time exhibits the same activation energy as the ion conductivity in the off-state. These results demonstrate that both types of LECs are really two extremes of one class of electroluminescent devices. They also implicate that no fundamental difference exists between charge transport in small molecular weight or polymeric mixed ionic and electronic conductive materials. Additionally, it follows that the ionic conductivity is responsible for the dynamic properties of devices and systems using them. This likely extends to mixed ionic and electronic conductive materials used in organic solar cells and in a variety of biological systems.

Light-emitting electrochemical cells using cyanine dyes as the active components.

Light-emitting electrochemical cells (LECs) based on cyanine molecules were prepared. High photoluminescence quantum yields were obtained for host-guest films using two cyanine dyes, reaching 27%. Sandwiching these films in between two electrodes allows for very stable near-infrared emission with a maximum radiant flux of 1.7 W m(-2) at an external quantum efficiency of 0.44%.

Efficient green-light-emitting electrochemical cells based on ionic iridium complexes with sulfone-containing cyclometalating ligands.

A new approach to obtain green-emitting iridium(III) complexes is described. The synthetic approach consists of introducing a methylsulfone electron-withdrawing substituent into a 4-phenylpyrazole cyclometalating ligand in order to stabilize the highest-occupied molecular orbital (HOMO). Six new complexes have been synthesized incorporating the conjugate base of 1-(4-(methylsulfonyl)phenyl)-1H-pyrazole as the cyclometalating ligand. The complexes show green emission and very high photoluminescence quantum yields in both diluted and concentrated films. When used as the main active component in light-emitting electrochemical cells (LECs), green electroluminance is observed. High efficiencies and luminances are obtained at low driving voltages. This approach for green emitters is an alternative to the widely used fluorine-based substituents in the cyclometalating ligands and opens new design possibilities for the synthesis of green emitters for LECs.

Dynamic doping in bright and stable light emitting electrochemical cells.

By using fast current density and luminance versus voltage (JL-V) analysis the device operation of sandwiched light emitting electrochemical cells (LECs) during their normal voltage driving operation mode is studied. In LECs the application of a voltage results in the movement of ions changing the state of the device, as a result the JL-V scans need to be performed fast and meet certain conditions to be meaningful. Space-charge limited current behavior is observed once the injection barriers are overcome. The increase of the current density after this point imply that the effective thickness of the devices is reduced which indicates the formation of more conductive regions adjacent to the electrodes. The increase in conductivity is a consequence of compensation of the injected electrons by dissociated ions that effectively increase the carrier concentration similar like in electrochemically doped semiconductors. The extension of the dynamically doped regions can be controlled by applying a pulsed current driving scheme which allows for both sub-second turn-on time and long lifetimes.

Identification of the Origin of Ultralow Dark Currents in Organic Photodiodes.

Organic bulk heterojunction photodiodes (OPDs) attract attention for sensing and imaging. Their detectivity is typically limited by a substantial reverse bias dark current density (Jd ). Recently, using thermal admittance or spectral photocurrent measurements, Jd has been attributed to thermal charge generation mediated by mid-gap states. Here, the temperature dependence of Jd in state-of-the-art OPDs is reported with Jd down to 10-9  mA cm-2 at -0.5 V bias. For a variety of donor-acceptor bulk-heterojunction blends it is found that the thermal activation energy of Jd is lower than the effective bandgap of the blends, by ca. 0.3 to 0.5 eV, but higher than expected for mid-gap states. Ultra-sensitive sub-bandgap photocurrent spectroscopy reveals that the minimum photon energy for optical charge generation in OPDs correlates with the dark current thermal activation energy. The dark current in OPDs is attributed to thermal charge generation at the donor-acceptor interface mediated by intra-gap states near the band edges.

Highly luminescent half-lantern cyclometalated platinum(II) complex: synthesis, structure, luminescence studies, and reactivity.

The half-lantern compound [{Pt(bzq)(µ-C(7)H(4)NS(2)-κN,S)}(2)]·Me(2)CO (1) was obtained by reaction of equimolar amounts of potassium 2-mercaptobenzothiazolate (KC(7)H(4)NS(2)) and [Pt(bzq)(NCMe)(2)]ClO(4). The Pt(II)···Pt(II) separation in the neutral complex [{Pt(bzq)(µ-C(7)H(4)NS(2)-κN,S)}(2)] is 2.910 (2) Å, this being among the shortest observed in half-lantern divalent platinum complexes. Within the complex, the benzo[h]quinoline (bzq) groups lie in close proximity with most C···C distances being between 3.3 and 3.7 Å, which is indicative of significant π-π interactions. The reaction of 1 with halogens X(2) (X(2) = Cl(2), Br(2), or I(2)) proceeds with a two-electron oxidation to give the corresponding dihalodiplatinum(III) complexes [{Pt(bzq)(µ-C(7)H(4)NS(2)-κN,S)X}(2)] (X = Cl 2, Br 3, I 4). Their X-ray structures confirm the retention of the half-lantern structure and the coordination mode of the bzq and the bridging ligand µ-C(7)H(4)NS(2)-κN,S. The Pt-Pt distances (Pt-Pt = 2.6420(3) Å 2, 2.6435(4) Å 3, 2.6690(3) Å 4) are shorter than that in 1 because of the Pt-Pt bond formation. Time dependent-density functional theory (TD-DFT) studies performed on 1 show a formal bond order of 0 between the metal atoms, with the 6p(z) contribution diminishing the antibonding character of the highest occupied molecular orbital (HOMO) and being responsible for an attractive intermetallic interaction. A shortening of the Pt-Pt distance from 2.959 Å in the ground state S(0) to 2.760 Å in the optimized first excited state (T(1)) is consistent with an increase in the Pt-Pt bond order to 0.5. In agreement with TD-DFT calculations, the intense, structureless, red emission of 1 in the solid state and in solution can be mainly attributed to triplet metal-metal-to-ligand charge transfer ((3)MMLCT) [dσ*(Pt-Pt) → π*(bzq)] excited states. The high quantum yields of this emission measured in toluene (44%) and solid state (62%) at room temperature indicate that 1 is a very efficient and stable (3)MMLCT emitter, even in solution. The high luminescence quantum yield of its red emission, added to its neutral character and the thermal stability of 1, make it a potential compound to be incorporated as phosphorescent dopant in multilayer organic light-emitting devices (OLEDs).

Dynamic doping and degradation in sandwich-type light-emitting electrochemical cells.

Photoluminescence spectroscopy has been performed in situ during device operation and after switch-off on ionic transition metal complex (iTMC)-based sandwich-type light-emitting electrochemical cells (LECs). It is demonstrated that the photoluminescence of the LECs decreases with increasing operating time. For operating times up to three hours the decline in photoluminescence is fully recoverable after switching off the bias. These results imply that doping of the iTMC layer is responsible, not only, for the turn-on of LECs but also for their lifetimes.

A counterion study of a series of [Cu(P

The syntheses and characterisations of a series of heteroleptic copper(I) compounds [Cu(POP)(Mebpy)][A], [Cu(POP)(Me2bpy)][A], [Cu(xantphos)(Mebpy)][A] and [Cu(xantphos)(Me2bpy)][A] in which [A]- is [BF4]-, [PF6]-, [BPh4]- and [BArF4]- (Mebpy = 6-methyl-2,2'-bipyridine, Me2bpy = 6,6'-dimethyl-2,2'-bipyridine, POP = oxydi(2,1-phenylene)bis(diphenylphosphane), xantphos = (9,9-dimethyl-9H-xanthene-4,5-diyl)bis(diphenylphosphane), [BArF4]- = tetrakis(3,5-bis(trifluoromethyl)phenyl)borate) are reported. Nine of the compounds have been characterised by single crystal X-ray crystallography, and the consequences of the different anions on the packing interactions in the solid state are discussed. The effects of the counterion on the photophysical properties of [Cu(POP)(N^N)][A] and [Cu(xantphos)(N^N)][A] (N^N = Mebpy and Me2bpy) have been investigated. In the solid-state emission spectra, the highest energy emission maxima are for [Cu(xantphos)(Mebpy)][BPh4] and [Cu(xantphos)(Me2bpy)][BPh4] (λemmax = 520 nm) whereas the lowest energy λemmax values occur for [Cu(POP)(Mebpy)][PF6] and [Cu(POP)(Mebpy)][BPh4] (565 nm and 563 nm, respectively). Photoluminescence quantum yields (PLQYs) are noticeably affected by the counterion; in the [Cu(xantphos)(Me2bpy)][A] series, solid-state PLQY values decrease from 62% for [PF6]-, to 44%, 35% and 27% for [BF4]-, [BPh4]- and [BArF4]-, respectively. This latter series of compounds was used as active electroluminescent materials on light-emitting electrochemical cells (LECs). The luminophores were mixed with ionic liquids (ILs) [EMIM][A] ([EMIM]+ = [1-ethyl-3-methylimidazolium]+) containing the same or different counterions than the copper(I) complex. LECs containing [Cu(xantphos)(Me2bpy)][BPh4] and [Cu(xantphos)(Me2bpy)][BArF4] failed to turn on under the LEC operating conditions, whereas those with the smaller [PF6]- or [BF4]- counterions had rapid turn-on times and exhibited maximum luminances of 173 and 137 cd m-2 and current efficiencies of 3.5 and 2.6 cd A-1, respectively, when the IL contained the same counterion as the luminophore. Mixing the counterions ([PF6]- and [BF4]-) of the active complex and the IL led to a reduction in all the figures of merit of the LECs.

Efficient Perovskite Light-Emitting Diodes: Effect of Composition, Morphology, and Transport Layers.

Organic-inorganic metal halide perovskites are emerging as novel materials for light-emitting applications due to their high color purity, band gap tunability, straightforward synthesis, and inexpensive precursors. In this work, we improve the performance of three-dimensional perovskite light-emitting diodes (PeLEDs) by tuning the emissive layer composition and thickness and by using small-molecule transport layers. Additionally, we correlate PeLED efficiencies to the perovskite structure and morphology. The results show that the PeLEDs containing perovskites with an excess of methylammonium bromide (MABr) to lead bromide (PbBr2) in a 2:1 ratio and a layer thickness of 80 nm have the highest performance. The optimized device exhibits a peak luminance of 17 600 cd/m2 and an external quantum efficiency of 3.9%. Structural and morphological studies reveal a reduction in crystallite size and surface roughness with decreasing perovskite layer thickness and increasing ratio of MABr to PbBr2. Balanced charge injection, spatial charge confinement, and reduction in nonradiative sites can explain the enhanced performance by virtue of favorable morphology and transport layer choice.

Hot Carrier Generation and Extraction of Plasmonic Alloy Nanoparticles.

The conversion of light to electrical and chemical energy has the potential to provide meaningful advances to many aspects of daily life, including the production of energy, water purification, and optical sensing. Recently, plasmonic nanoparticles (PNPs) have been increasingly used in artificial photosynthesis (e.g., water splitting) devices in order to extend the visible light utilization of semiconductors to light energies below their band gap. These nanoparticles absorb light and produce hot electrons and holes that can drive artificial photosynthesis reactions. For n-type semiconductor photoanodes decorated with PNPs, hot charge carriers are separated by a process called hot electron injection (HEI), where hot electrons with sufficient energy are transferred to the conduction band of the semiconductor. An important parameter that affects the HEI efficiency is the nanoparticle composition, since the hot electron energy is sensitive to the electronic band structure of the metal. Alloy PNPs are of particular importance for semiconductor/PNPs composites, because by changing the alloy composition their absorption spectra can be tuned to accurately extend the light absorption of the semiconductor. This work experimentally compares the HEI efficiency from Ag, Au, and Ag/Au alloy nanoparticles to TiO2 photoanodes for the photoproduction of hydrogen. Alloy PNPs not only exhibit tunable absorption but can also improve the stability and electronic and catalytic properties of the pure metal PNPs. In this work, we find that the Ag/Au alloy PNPs extend the stability of Ag in water to larger applied potentials while, at the same time, increasing the interband threshold energy of Au. This increasing of the interband energy of Au suppresses the visible-light-induced interband excitations, favoring intraband excitations that result in higher hot electron energies and HEI efficiencies.

Thienylpyridine-based cyclometallated iridium(III) complexes and their use in solid state light-emitting electrochemical cells.

The synthesis and characterization of four iridium(iii) complexes [Ir(thpy)2(N^N)][PF6] where Hthpy = 2-(2'-thienyl)pyridine and N^N are 6-phenyl-2,2'-bipyridine (1), 4,4'-di-(t)butyl-2,2'-bipyridine (2), 4,4'-di-(t)butyl-6-phenyl-2,2'-bipyridine (3) or 4,4'-dimethylthio-2,2'-bipyridine (4) are described. The single crystal structures of ligand 4 and the complexes containing the [Ir(thpy)2(1)](+) and [Ir(thpy)2(4)](+) cations have been determined. In [Ir(thpy)2(1)](+), the pendant phenyl ring engages in an intra-cation π-stacking interaction with one of the thienyl rings in the solid state, and undergoes hindered rotation on the NMR timescale in [Ir(thpy)2(1)](+) and [Ir(thpy)2(3)](+). The solution spectra of [Ir(thpy)2(1)][PF6] and [Ir(thpy)2(4)][PF6] show emission maxima around 640 nm and are significantly red-shifted compared with [Ir(thpy)2(2)][PF6] and [Ir(thpy)2(3)][PF6] which have structured emission bands with maxima around 550 and 590 nm. In thin films, the emission spectra of the four complexes are similar with emission peaks around 550 and 590 nm and a shoulder around 640 nm that are reminiscent of the features observed in solution. In solution, quantum yields are low, but in thin films, values range from 29% for [Ir(thpy)2(1)][PF6] to 51% for [Ir(thpy)2(4)][PF6]. Density functional theory calculations rationalize the structured emission observed for the four complexes in terms of the (3)LC nature predicted for the lowest-energy triplet states that mainly involve the cyclometallated [thpy](-) ligands. Support for this theoretical result comes from the observed features of the low temperature (in frozen MeCN) photoluminescence spectra of the complexes. Photoluminescence and electroluminescence spectra of the complexes in a light-emitting electrochemical cell (LEC) device configuration have been investigated. The electroluminescence spectra are similar for all [Ir(thpy)2(N^N)][PF6] complexes with emission maxima at ≈600 nm, but device performances are relatively poor probably due to the poor charge-transporting properties of the complexes.

Ionic iridium complex and conjugated polymer used to solution-process a bilayer white light-emitting diode.

Bilayer white light-emitting devices are prepared from solution, using an ionic orange phosphorescent organometallic complex and a neutral fluorescent conjugated polymer. Because of the very different polarity of the two components, they dissolve in orthogonal solvents, allowing for the direct deposition of the blue emitter on top of the orange emitter without the need of cross-linking or special coating methodology. Fine tuning of the layer thickness of both light-emitting layers allows for the color tuning of different types of white light.

Effect of free rotation in polypyridinic ligands of Ru(II) complexes applied in light-emitting electrochemical cells.

In the present work we report the synthesis and the electrochemical, photoluminescent and electroluminescent properties of two new Ru(II) complexes described by the general formula [Ru(phen)2X](2+), where phen is 1,10-phenanthroline. The X ligand consists of a 2,2'-bipyridine (bpy) unit substituted with two phenyl rings connected to the bpy core through a saturated (Lhydro = 4,4'-diphenylethyl-2,2'-bipyridine) or a conjugated (LH = 4,4'-bis(α-styrene)-2,2'-bipyridine) carbon-carbon bridge. The photoluminescent spectra indicate that, both in solution and solid state, the complex bearing the aliphatic substitution bridges exhibits a higher quantum yield and a longer excited state lifetime than the fully conjugated complex. The new complexes were used in light-emitting electrochemical cells (LECs) showing red emission for the complex with the Lhydro ligand and no light emission for the complex incorporating the LH ligand. This and the photophysical properties make it plausible that for these complexes the degree of freedom increases with aliphatic substitution. As a consequence, the negative effect of the auto-quenching processes taking place in solid LEC devices due to the close molecular packing is limited. When compared with the archetype [Ru(phen)3](2+) complex, the complex with aliphatic substitution shows better performance in the device supporting the beneficial effect of the bulky substitution.