Structural and Conformational Chemistry from Electrochemical Molecular Machines. Replicating Biological Functions. A Review.

Each constitutive chain of a conducting polymer electrode acts as a reversible multi-step electrochemical molecular motor: reversible reactions drive reversible conformational movements of the chain. The reaction-driven cooperative actuation of those molecular machines generates, or destroys, inside the film the free volume required to lodge/expel balancing counterions and solvent: reactions drive reversible film volume variations, which basic structural components are here identified and quantified from electrochemical responses. The content of the reactive dense gel (chemical molecular machines, ions and water) mimics that of the intracellular matrix in living functional cells. Reaction-driven properties (composition-dependent properties) and devices replicate biological functions and organs. An emerging technological world of soft, wet, reaction-driven, multifunctional and biomimetic devices and the concomitant zoomorphic or anthropomorphic robots is presented.

Reactions driving conformational movements (molecular motors) in gels: conformational and structural chemical kinetics.

In this perspective the empirical kinetics of conducting polymers exchanging anions and solvent during electrochemical reactions to get dense reactive gels is reviewed. The reaction drives conformational movements of the chains (molecular motors), exchange of ions and solvent with the electrolyte and structural (relaxation, swelling, shrinking and compaction) gel changes. Reaction-driven structural changes are identified and quantified from electrochemical responses. The empirical reaction activation energy (Ea), the reaction coefficient (k) and the reaction orders (α and ß) change as a function of the conformational energy variation during the reaction. This conformational energy becomes an empirical magnitude. Ea, k, α and ß include and provide quantitative conformational and structural information. The chemical kinetics becomes structural chemical kinetics (SCK) for reactions driving conformational movements of the reactants. The electrochemically stimulated conformational relaxation model describes empirical results and some results from the literature for biochemical reactions. In parallel the development of an emerging technological world of soft, wet, multifunctional and biomimetic tools and anthropomorphic robots driven by reactions of the constitutive material, as in biological organs, can be now envisaged being theoretically supported by the kinetic model.

Exchanged cations and water during reactions in polypyrrole macroions from artificial muscles.

The movement of the bilayer (polypyrrole-dodecylbenzenesulfonate/tape) during artificial muscle bending under flow of current square waves was studied in aqueous solutions of chloride salts. During current flow, polypyrrole redox reactions result in variations in the volumes of the films and macroscopic bending: swelling by reduction with expulsion of cations and shrinking by oxidation with the insertion of cations. The described angles follow a linear function, different in each of the studied salts, of the consumed charge: they are faradaic polymeric muscles. The linearity indicates that cations are the only exchanged ions in the studied potential range. By flow of the same specific charge in every electrolyte, different angles were described by the muscle. The charge and the angle allow the number and volume of both the exchanged cations and the water molecules (related to a reference) between the film to be determined, in addition to the electrolyte per unit of charge during the driving reaction. The attained apparent solvation numbers for the exchanged cations were: 0.8, 0.7, 0.6, 0.5, 0.5, 0.4, 0.25, and 0.0 for Na(+), Mg(2+), La(3+), Li(+), Ca(2+), K(+), Rb(+), and Cs(+), respectively.

Effect of the electrolyte concentration and substrate on conducting polymer actuators.

The effect of the electrolyte concentration (NaCl aqueous electrolyte) on the dimensional variations of films of polypyrrole doped with dodecylbenzenesulfonate PPy(DBS) on Pt and Au wires was studied. Any parallel reaction that occurs during the redox polymeric reaction that drives the mechanical actuation, as detected from the coulovoltammetric responses, was avoided by using Pt wires as substrate and controlling the potential limits, thus significantly increasing the actuator lifetime. The NaCl concentration of the electrolyte, when studied by cyclic voltammetry or chronoamperometry, has a strong effect on the performance as well. A maximum expansion was achieved in 0.3 M aqueous solution. The consumed oxidation and reduction charges control the fully reversible dimensional variations: PPy(DBS) films are faradaic polymeric motors. Parallel to the faradaic exchange of the cations, osmotic, electrophoretic, and structural changes play an important role for the water exchange and volume change of PPy(DBS).

Electrochemistry of carbon nanotubes: reactive processes, dual sensing-actuating properties and devices.

Single-walled carbon nanotubes (SWCNT) embedded in a non-electroactive polymer are electrochemically characterized. The increasing voltammetric maximums obtained with rising temperature or electrolyte concentration point to a chemical nature of the processes. The chemical kinetic control of the processes is corroborated by its empirical chemical kinetics: the initial reaction rates are obtained from the chronoamperometric responses to potential steps. The activation energy of the reaction includes information about the structural state of the SWCNT before the potential step. Under constant current the potential evolution (chronopotentiometric response) and consumed electrical energy at any time change as a function of (are sensors of) the experimental temperature or the electrolyte concentration. The reactive material, or any device based on this material, senses these working variables, and shows dual and simultaneous actuating-sensing properties.

Bioinspired polypyrrole based fibrillary artificial muscle with actuation and intrinsic sensing capabilities.

A non-conventional, bioinspired device based on polypyrrole coated electrospun fibrous microstructures, which simultaneously works as artificial muscle and mechanical sensor is reported. Fibrous morphology is preferred due to its high active surface which can improve the actuation/sensing properties, its preparation still being challenging. Thus, a simple fabrication algorithm based on electrospinning, sputtering deposition and electrochemical polymerization produced electroactive aligned ribbon meshes with analogous characteristics as natural muscle fibers. These can simultaneously generate a movement (by applying an electric current/potential) and sense the effort of holding weights (by measuring the potential/current while holding objects up to 21.1 mg). Electroactivity was consisting in a fast bending/curling motion, depending on the fiber strip width. The amplitude of the movement decreases by increasing the load, a behavior similar with natural muscles. Moreover, when different weights were hung on the device, it senses the load modification, demonstrating a sensitivity of about 7 mV/mg for oxidation and - 4 mV/mg for reduction. These results are important since simultaneous actuation and sensitivity are essential for complex activity. Such devices with multiple functionalities can open new possibilities of applications as e.g. smart prosthesis or lifelike robots.

Electropolymerization of naphthaleneamidinemonoimide-modified poly(thiophene).

The new polymer presents a p-doping process with anion exchange and its electrochemical reduction with cation exchange during potential cycling. Stored specific charges of 38 mAh g(-1) for the polymer reduction and 13 mAh g(-1) for its oxidation make the material very promising for fast charge/discharge batteries or specialised supercapacitors in which the material is also required as the anode.

Enhancing the electrocatalytic activity and stability of Prussian blue analogues by increasing their electroactive sites through the introduction of Au nanoparticles.

Prussian blue analogues (PBAs) have been proven as excellent Earth-abundant electrocatalysts for the oxygen evolution reaction (OER) in acidic, neutral and alkaline media. Further improvements can be achieved by increasing their electrical conductivity, but scarce attention has been paid to quantify the electroactive sites of the electrocatalyst when this enhancement occurs. In this work, we have studied how the chemical design influences the specific density of electroactive sites in different Au-PBA nanostructures. Thus, we have first obtained and fully characterized a variety of monodisperse core@shell hybrid nanoparticles of Au@PBA (PBA of NiIIFeII and CoIIFeII) with different shell sizes. Their catalytic activity is evaluated by studying the OER, which is compared to pristine PBAs and other Au-PBA heterostructures. By using the coulovoltammetric technique, we have demonstrated that the introduction of 5-10% of Au in weight in the core@shell leads to an increase in the electroactive mass and thus, to a higher density of active sites capable of taking part in the OER. This increase leads to a significant decrease in the onset potential (up to 100 mV) and an increase (up to 420%) in the current density recorded at an overpotential of 350 mV. However, the Tafel slope remains unchanged, suggesting that Au reduces the limiting potential of the catalyst with no variation in the reaction kinetics. These improvements are not observed in other Au-PBA nanostructures mainly due to a lower contact between both compounds and the Au oxidation. Hence, an Au core activates the PBA shell and increases the conductivity of the resulting hybrid, while the PBA shell prevents Au oxidation. The strong synergistic effect existing in the core@shell structure evidences the importance of the chemical design for preparing PBA-based nanostructures exhibiting better electrocatalytic performances and higher electrochemical stabilities.

The effect of high level tennis matches on urine steroid profiles in professional tennis players.

AIM: Modern day, tennis matches are characterized by shorter and more intense efforts with players enduring great physical and psychological stress. The aim of this study was to evaluate acute changes in the urinary steroid profile of elite tennis players following professional tournament matches. METHODS: Eight professional male tennis players participated in this study. Urine samples were collected before and after tennis matches corresponding to the quarter finals of the Spanish Tennis Masters. RESULTS: After the match, there was a significant fall (P<0.05) in testosterone, androsterone, etiocholanolone, and dehydroepiandrosterone (DHEA). Cortisone increased whereas tetrahydrocortisone (THE) decreased. The anabolic/catabolic hormone ratio also decreased, although only the fall in total suprarenal androgen (TSA)/total corticosteroid (TC) and DHEA/(THE+THF) ratios had a significant decrease (P<0.05). CONCLUSION: These results indicate that a professional tennis match modifies the urine steroid profiles of players, increasing corticosteroid and decreasing androgen excretion in urine, suggesting an important adrenal activation.

Concept of an artificial muscle design on polypyrrole nanofiber scaffolds.

Here we present the synthesis and characterization of two new conducting materials having a high electro-chemo-mechanical activity for possible applications as artificial muscles or soft smart actuators in biomimetic structures. Glucose-gelatin nanofiber scaffolds (CFS) were coated with polypyrrole (PPy) first by chemical polymerization followed by electrochemical polymerization doped with dodecylbenzensulfonate (DBS-) forming CFS-PPy/DBS films, or with trifluoromethanesulfonate (CF3SO3-, TF) giving CFS-PPy/TF films. The composition, electronic and ionic conductivity of the materials were determined using different techniques. The electro-chemo-mechanical characterization of the films was carried out by cyclic voltammetry and square wave potential steps in bis(trifluoromethane)sulfonimide lithium solutions of propylene carbonate (LiTFSI-PC). Linear actuation of the CFS-PPy/DBS material exhibited 20% of strain variation with a stress of 0.14 MPa, rather similar to skeletal muscles. After 1000 cycles, the creeping effect was as low as 0,2% having a good long-term stability showing a strain variation per cycle of -1.8% (after 1000 cycles). Those material properties are excellent for future technological applications as artificial muscles, batteries, smart membranes, and so on.

Multifunctionality of Polypyrrole Polyethyleneoxide Composites: Concurrent Sensing, Actuation and Energy Storage.

In films of conducting polymers, the electrochemical reaction(s) drive the simultaneous variation of different material properties (reaction multifunctionality). Here, we present a parallel study of actuation-sensing-energy storage triple functionality of polypyrrole (PPy) blends with dodecylbenzenesulfonate (DBS-), PPy/DBS, without and with inclusion of polyethyleneoxide, PPy-PEO/DBS. The characterization of the response of both materials in aqueous solutions of four different salts indicated that all of the actuating, sensing and charge storage responses were, independent of the electrolyte, present for both materials, but stronger for the PPy-PEO/DBS films: 1.4× higher strains, 1.3× higher specific charge densities, 2.5× higher specific capacitances and increased ion-sensitivity towards the studied counterions. For both materials, the reaction energy, the material potential and the strain variations adapt to and sense the electrical and chemical (exchanged cation) conditions. The driving and the response of actuation, sensing and charge can be controlled/read, simultaneously, via just two connecting wires. Only the cooperative actuation of chemical macromolecular motors from functional cells has such chemical multifunctionality.

Chronoamperometric study of conformational relaxation in PPy(DBS).

In conjugated polymer devices that switch from one oxidation level to another, such as artificial muscles, it is important to understand memory effects that stem from conformational relaxation movements of the polymer chains. Chronoamperometry during electrochemical switching of polypyrrole doped with dodecylbenzenesulfonate, PPy(DBS), is used to gain insight into the conformational relaxation processes in cation-transporting materials. During oxidation, the current decays exponentially with a time constant that decreases with the anodic voltage. During reduction, there is again an exponentially decaying current with a time constant that decreases with the cathodic voltage, but superimposed on that is a small current peak that increases in size with the voltage. This peak accounts for a maximum of approximately 20% of the total reduction charge, which is approximately the same amount of charge that is in the most cathodic pair of peaks in the cyclic voltammogram. The position of this peak depends logarithmically on the applied cathodic potential (shifting to shorter times with larger Eca) as well as on the anodic potential that was applied just prior to the reduction step (shifting to longer times with Ean). Furthermore, the shoulder position depends logarithmically on the time that the prior anodic voltage was held (shifting to longer times with twait). These results are consistent with the electrochemically stimulated conformational relaxation (ESCR) model.

Urinary steroid profile after the completion of concentric and concentric/eccentric trials with the same total workload.

High intensity strength training causes changes in steroid hormone concentrations. This could be altered by the muscular contraction type: eccentric or concentric. The aim of this study was to compare the effect of the completion of a short concentric (CON) and concentric/eccentric (CON/ECC) trial on the urinary steroid profile, both with the same total work. 18 males performed the trials on an isokinetic dynamometer (BIODEX III) exercising quadriceps muscles, right and left, on different days. Trial 1 (CON): 4 x 10 Concentric knee extension + relax knee flexion, speed 600/second; rest 90 seconds between each series and 4 minutes between each leg exercise. Trial 2 (CON/ECC): 4 x 5 concentric knee extension + Eccentric knee flexion under similar conditions. Urine samples were taken before the exercise and one hour after finishing it. Androsterone, Etiocholanolone, DHEA, Androstenedione, Testosterone, Epitestosterone, Dehydrotestosterone, Estrone, B-Estradiol, Tetrahydrocortisone, Tetrahydrocortisol, Cortisone and Cortisol (free, glucoconjugated and sulfoconjugated) urinary values were determined using gas chromatography/mass spectrometry techniques. No significant differences were noted in Total Work and Average Peak Torque, although Maximum Peak Torque in the CON/ECC trial was higher than in the CON trial. These results demonstrate no changes in the steroid profile before and after trials, or when comparing CON to CON/ECC trials. The data suggest that eccentric contractions do not cause hormonal changes different to the ones produced by concentric contractions, when they are performed in strength short trials with the same total workload.

Heterocyclic amines in griddled beef steak analysed using a single extract clean-up procedure.

Heterocyclic amines (HAs), which are potent mutagenic and carcinogenic substances, are formed in muscle meats during their cooking under ordinary conditions. In this work, we measured the concentration of 15 HAs in different samples of griddled beef steak, which is one of the most consumed meat items is Spain. Three samples were obtained from different restaurants, and the other sample was cooked under controlled conditions to a well-done degree of doneness. A low-time consuming solid-phase extraction procedure was used to purify the samples, and liquid chromatography-tandem mass spectrometry with an ion trap mass analyzer was used as determination technique. A second well-established purification procedure was used to demonstrate the applicability of the method to the analysis of these kind of samples. 8-MeIQx, 4,8-DiMeIQx, PhIP and the comutagens Harman and Norharman were found in all the samples, at levels ranging from 0.28 to 21.2ngg(-1). AalphaC was found in three samples (0.18-1.41ngg(-1)), whereas Trp-P-1 was detected in two samples (0.35ngg(-1)). MeAalphaC was found in three samples but could only be quantified in one (0.15ngg(-1)). Trp-P-2 and DMIP were also detected in some cases at levels below their limit of quantification. The remaining HAs analyzed were not detected in any of the samples.

Self-Supported Polypyrrole/Polyvinylsulfate Films: Electrochemical Synthesis, Characterization, and Sensing Properties of Their Redox Reactions.

Invited for this month's cover picture is the group of Professor Toribio F. Otero at the Centre for Electrochemistry, Intelligent Materials and Devices at the Polytechnic University of Cartagena (Spain). The cover picture shows an electrochemical cell as well as three representative cyclic voltammetric responses, displaying the electrolyte potential window, the monomer oxidation-polymerization potential range, and the polymer oxidation-reduction potential window. For more details, read the full text of the Full Paper at 10.1002/open.201600139.

Self-Supported Polypyrrole/Polyvinylsulfate Films: Electrochemical Synthesis, Characterization, and Sensing Properties of Their Redox Reactions.

Thick films of polypyrrole/polyvinylsulfate (PPy/PVS) blends were electrogenerated on stainless-steel electrodes under potentiostatic conditions from aqueous solution. The best electropolymerization potential window was determined by cyclic voltammetry. After removing the film from the back metal, self-supported electrodes were obtained. Voltammetric, coulovoltammetric, and chronoamperometric responses from a LiClO4 aqueous solution indicated the formation of an energetically stable structure beyond a reduction threshold of the material. Its subsequent oxidation required higher anodic voltammetric overpotentials or longer chronoamperometric oxidation times. This structure was attributed to the formation of lamellar or vacuolar structures. X-ray photoelectron spectroscopy analysis of the films under different oxidations states revealed that the electrochemical reactions drive the reversible exchange of cations between the film and the electrolyte. The electrical energy and the charge consumed by the reversible reaction of the film under voltammetric conditions between the constant potential limits are a function of the potential scan rate, that is, they sense the working electrochemical conditions.

Electrospun silk fibroin scaffolds coated with reduced graphene promote neurite outgrowth of PC-12 cells under electrical stimulation.

Novel approaches to neural research require biocompatible materials capable to act as electrode structures or scaffolds for tissue engineering in order to stimulate or restore the functionality of damaged tissues. This work offers promising results that indicate the potential use of electrospun silk fibroin (SF) scaffolds coated with reduced graphene oxide (rGO) in this sense. The coated material becomes conductor and electroactive. A complete characterisation of SF/rGO scaffolds is provided in terms of electrochemistry, mechanical behaviour and chemical conformation of fibroin. The excellent biocompatibility of this novel material is proved with cultures of PC-12 cells. The coating with rGO improved the adhesion of cells in comparison with cells growing onto the surface of pure SF scaffolds. Also, the use of SF/rGO scaffolds combined with electrical stimulation promoted the differentiation into neural phenotypes reaching comparable or even superior levels to those obtained by means of the traditional treatment with neural growth factor (NGF).

Fabrication of electrospun silk fibroin scaffolds coated with graphene oxide and reduced graphene for applications in biomedicine.

Silk fibroin and graphene are both promising biomaterials described in the bibliography. Hybrid scaffolds combining their properties could be attractive for tissue engineering applications. In this work, a new methodology to produce electrospun fibroin scaffolds coated with graphene materials is provided. The mechanical, electrical and electrochemical properties of the materials attained were characterised. The fibre diameters were measured (from 3.9 to 5.2 µm). The samples coated with reduced grapheme were electronic conductors and electroactive in liquid electrolytes, showing maximum oxidation and reduction (around−0.4 V peak). The chronoamperometric responses showed a reduction shoulder, pointing to the entrance of balancing cations from the solution by nucleation­relaxation: the reaction induced structural changes in the graphene. In order to check the biocompatibility of the materials, they were seeded with L929 fibroblasts. The excellent biocompatibility of silk fibroin meshes was maintained after coating with graphene, being the proliferation results equal in all the treatments 7 days after the seeding (Tukey, p N 0.05).The conductive and electroactive properties of meshes coated with reduced graphene allow the potential application of local electric fields or local ionic currents to cell cultures, biological interfaces or animal models without host response.

Occurrence of Only One Form of Glutamine Synthetase in the Green Alga Monoraphidium braunii.

Anion-exchange chromatography of crude extracts from the green alga Monoraphidium braunii yielded two glutamine synthetase (GS) activities. The ratio of activities was markedly different when crude extracts were subjected to various processing conditions but was not influenced by environmental factors of cell cultures. However, high performance liquid chromatography anion-exchange chromatograms showed only one GS if the crude extracts were processed immediately after cell disruption. Moreover, standard chromatography of crude extracts obtained in the absence of dithioerythritol, a reductant generally used in disruption buffers, yielded a single activity peak. Enzyme samples from the two activities obtained in the presence of dithioerythritol were purified for physicochemical characterization and antibody production. Both enzyme samples exhibited similar reactions to different inactivating agents and were undistinguishable by size-exclusion chromatography and native polyacrylamide gel electrophoresis. Additionally, the two GS preparations showed absolute antigenic identity as demonstrated by immunodiffusion and immunoblotting experiments. Immunocytochemistry of M. braunii cryosections evidenced a chloroplast-specific distribution of the enzyme, which rules out the existence of a cytoplasmic counterpart. All these results support the proposal that M. braunii possesses only one form of GS.

Diffusion coefficients in swelling polypyrrole: ESCR and Cottrell models.

Reliable diffusion coefficients, D, for the diffusion of perchlorate anions into polypyrrole films during polymeric oxidation were obtained from chronoamperometric results. Two different models were used to calculate D: the Cottrell equation and the electrochemically stimulated conformational relaxation (ESCR) model. As expected, the initial Cottrell hypothesis was far from swelling/shrinking polymeric electrodes and the obtained D range was from 10(-10) to 10(-6) cm(2) s(-1). The ESCR model, based on the internal diffusion that takes place from regions where the steady state of oxidation has already been reached to regions where the oxidation is only just beginning, provided values of D ranging from 0.4 x 10(-9) to 2.2 x 10(-9) cm(2) s(-1), which is close to the values expected for a gel. When a constant amplitude is kept for the potential step, D increases with increasing initial anodic potentials, i.e., from increasingly swollen films. When it is stepped to the same oxidation potential, D decreases when starting from more cathodic potentials, i.e., from a more compact structure. These changes in D can be attributed to (i) swelling processes during oxidation, giving a gel-like structure; (ii) compacting processes at increasing cathodic potentials; (iii) the increasing thickness of the film during oxidation; and (iv) a decrease in film viscosity during the swelling process.