Microanalysis of Two Members of Oxicam Drugs by Quenching the Fluorescence of Newly Isolated Carbonaceous Materials From Incense Ash.

For the first time ever, useful fluorescent (FL) carbonaceous materials (CMTS) were isolated from incense ash using facile procedure on two steps; dispersion of the CMTS in water followed by filtration. The CMTS were characterized using the following techniques; dynamic light scattering (DLS), transmission electron microscopy (TEM) and Fourier transform infrared (FT-IR) spectroscopy. The CMTS exhibit excitation wavelength dependent fluorescence emission, so it can be used as a FL probe. The FL probe was employed for sensing and quantitative determination of two members of oxicam family (tenoxicam (TEN) and meloxicam (MEL)) that belongs to non-steroidal anti-inflammatory drugs (NSAIDs). The method is based on the quenching of the FL intensity of the isolated CMTS by inner filter effect mechanism (IFE). The FL intensity decreases in linear relationship with increasing the concentrations of the two cited drugs within the range of 4.0 - 30.0 µg/mL with mean percentage recoveries of 100.04 ± 0.95 and 100.07 ± 1.06 with detection limits of 1.31 µg/mL and 1.06 µg/mL for TEN and MEL, respectively. Finally, the developed sensing system was validated as per ICH guidelines and it was proved to be accurate and precise and applied successfully for quantitative determination of the two cited drugs in their capsule dosage forms with excellent percentage recoveries reaching to 97.66 ± 0.39and 98.19 ± 1.12 for TEN and MEL, respectively.

Novel contribution to the simultaneous monitoring of pramipexole dihydrochloride monohydrate and levodopa as co-administered drugs in human plasma utilizing UPLC-MS/MS.

An efficient, selective, sensitive, and rapid ultra-performance liquid chromatography tandem mass spectrometry method was established and validated for the quantification of pramipexole dihydrochloride monohydrate and levodopa simultaneously in human plasma with the aid of diphenhydramine as an internal standard. A simple protein precipitation technique with HPLC grade acetonitrile was efficiently utilized for the cleanup of plasma. The analysis was performed using a Hypersil gold 50 mm × 2.1 mm (1.9 µm) column and a mobile phase of 0.2% formic acid and methanol (90: 10 v/v). The triple-quadrupole mass spectrometer equipped with an electrospray source operated in the positive mode was set up in the selective reaction monitoring mode (SRM) to detect the ion transitions m/z 212.15 →153.01, m/z 198.10→ 135.16, and m/z 255.75 → 166.16 for pramipexole dihydrochloride monohydrate, levodopa, and diphenhydramine, respectively. The method was thoroughly validated according to FDA guidelines and proved to be linear, accurate, and precise over the range 100-4000 pg/mL for pramipexole dihydrochloride monohydrate and 60-4000 ng/mL for levodopa. The proposed method was effectively applied for monitoring both drugs in plasma samples of healthy volunteers.

Liquid chromatography-tandem MS/MS method for simultaneous quantification of paracetamol, chlorzoxazone and aceclofenac in human plasma: An application to a clinical pharmacokinetic study.

A facile, fast and specific method based on liquid chromatography-tandem mass spectrometry (LC-MS/MS) for the simultaneous quantitation of paracetamol, chlorzoxazone and aceclofenac in human plasma was developed and validated. Sample preparation was achieved by liquid-liquid extraction. The analysis was performed on a reversed-phase C18 HPLC column (5 µm, 4.6 × 50 mm) using acetonitrile-10 mM ammonium formate pH 3.0 (65:35, v/v) as the mobile phase where atrovastatin was used as an internal standard. A very small injection volume (3 µL) was applied and the run time was 2.0 min. The detection was carried out by electrospray positive and negative ionization mass spectrometry in the multiple-reaction monitoring mode. The developed method was capable of determining the analytes over the concentration ranges of 0.03-30.0, 0.015-15.00 and 0.15-15.00 µg/mL for paracetamol, chlorzoxazone and aceclofenac, respectively. Intraday and interday precisions (as coefficient of variation) were found to be ≤12.3% with an accuracy (as relative error) of ±5.0%. The method was successfully applied to a pharmacokinetic study of the three analytes after being orally administered to six healthy volunteers.

Bioinspired Carbon Dots-Based Fluorescent Sensor for the Selective Determination of a Potent Anti-Inflammatory Drug in the Presence of Its Photodegradation Products.

Herein, we synthesized biogenic carbon dots (CDs) with blue-shifted maximum excitation (λex/λem of 320/404 nm) from largely wasted tangerine seeds for the first time via a one-step hydrothermal method. The biogenic CDs exhibit a maximum excitation wavelength that overlaps with the absorption spectrum of ketorolac tromethamine (KETO) at 320 nm. The developed CDs serve as a turn-off fluorescent probe via an inner filter effect (IFE) quenching mechanism. The resulting CDs have high quantum yield (QY) (39% ± 2.89%, n = 5) and exhibited great performance toward KETO over a concentration range of 0.50-16.00 µg/mL with a limit of detection (LOD) = 0.17 µg/mL. The nanoprobe achieved a high % recovery in assaying KETO in tablet dosage form and had not been significantly affected by various interferents including co-formulated and co-administered drugs. The nanoprobe shows selectivity toward KETO, even in the presence of its photocatalytic degradation products. It can effectively investigate the elimination of KETO from aquatic systems and test its stability in pharmaceutical preparations. The developed nanoprobe underwent a comprehensive evaluation of its environmental impact using analytical eco-scale (AES), complex green analytical procedure index (Complex GAPI), and the Analytical GREEnness calculator (AGREE). The sustainability of the developed nano sensor was assessed and compared to the reported metal-based quantum dots probe for KETO using the innovative RGB 12 model, considering 12 white analytical chemistry (WAC) perspectives.

Development of Green HPTLC method for simultaneous determination of a promising combination Tamsulosin and Mirabegron: stability-indicating assay was examined.

Recently, mirabegron has been added to tamsulosin to treat overactive bladder in men with benign prostatic hypertrophy. A Rapid, selective, sensitive, and green high-performance thin-layer chromatography (HPTLC) approach was developed for the simultaneous determination of tamsulosin (TAM) and mirabegron (MIR) in pure and laboratory-prepared mixture. Complete separation was obtained on silica gel F254 using the solvent system methanol-ethyl acetate-ammonia (3:7:0.1, v/v). Short-wave ultraviolet light at 270 nm was used to view the chromatographic bands. For MIR and TAM, the suggested technique revealed compact spots with retention factor Rf values of 0.42 and 0.63, respectively. Within concentration ranges of 0.15-7.5 µg/band and 0.05-2.5 µg/band, good linearity was observed, with mean percentage recoveries of 100.04 ± 0.56 and 99.98% ± 0.95 for MIR and TAM, respectively. Green assessment of the developed HPTLC technique was estimated using different green analytical chemistry metrics such as Analytical eco-scale Analytical GREEness (AGREE), and Green Analytical Procedure Index (GAPI) metrics. The proposed method was effectively used as a stability-indicating assay to assess the presence of MIR and TAM in the pharmaceutical dosage form in the presence of their degradation product. The statistical analysis showed high precision and accuracy.

Fluorescent carbon dots as selective nano probe for determination of diacerein in presence of co-formulated drugs.

In this work, a new and simple carbon dots (CDs) based fluorescent probe was introduced for selective determination of diacerein (DIA) in presence of two co-formulated drugs. This highly fluorescent sensor was constructed using chitosan as a carbon and nitrogen source by single step carbonization. The constructed probe is based on the inner filter effect (IFE), in which DIA serves as a strong absorber, influencing the excitation of the fluorescer (CDs). This overlap leads to quenching of CDs fluorescence upon increasing DIA concentration within the range of 2.5-17.5 µg/mL with mean % recovery reached to 99.7 ± 0.7. The performance of the constructed sensor had been validated according to the ICH guidelines and the results revealed that it is precise and accurate. Moreover, it has many advantages such as simplicity, saving time and good selectivity for the determination of DIA as a minor component in presence of co-formulated drugs in its tablet dosage form.

Screen-printed sensors for efficient potentiometric analysis of tolperisone hydrochloride in presence of its co-formulated drugs.

Researchers seeking for green chemistry to help safeguard and boost the economy and the environment by discovering unique ways to decrease waste and find substitutes for dangerous chemicals. In this study, a green potentiometric ion-selective electrode (ISE) was developed for measurement of tolperisone HCl (TOLP) in bulk and Pharmaceutical dosage forms in presence of diclofenac sodium and paracetamol as co-formulated drugs. This paper presents the manufacture and characterization of a disposable potentiometric ion-selective strip with an enhanced detection limit for (TOLP) measurement in its tablet dosage form either alone or in presence of the co-formulated drugs. Numerous ion pairs (IPs), such as TOLP-tetraphenylborate (TOLP-TPB), TOLP-phosphotungstic acid (TOLP-PTA), and TOLP-ammonium Reinecke (TOLP- RKT) are tested in presence of different plasticizers. The optimal potentiometric response with a near Nernstian slope of 55.949 mV/decade was achieved within a linear concentration range of 5 [Formula: see text] 10-5 - 1 [Formula: see text] 10-2 M using (PTA) and ortho nitrophenyl octyl ether (o-NPOE) as a plasticizer. The effect of the nanoparticles on the membrane stability was studied using the graphene nanoplatelets which have an effective role in the enhancement of some constructed sensors stability. Finally, the developed technique is validated for the estimation of TOLP with high accuracy and precision.

Novel sensing probe using Terbium-sensitized luminescence and 8-hydroxyquinoline for determination of prucalopride succinate: green assessment with Complex-GAPI and analytical Eco-Scale.

A highly sensitive spectrofluorimetric method is developed for the determination of prucalopride succinate (PRU). The method depends on lanthanide-sensitized luminescence due to complex formation between the drug and terbium chloride (Tb+3) which is enhanced by the addition of 8 hydroxyquinoline (8HQ) and phosphate buffer (0.02 M, pH 3.2). The calibration curve was constructed over the linear range 10-300 ng/mL after excitation at 226 nm and measuring the emission of the ternary complex at 544 nm. The method was validated according to ICH Q2 (R1) guidelines and showed a good recovery ± RSD of 100.41% ± 1.26, the limits of detection and quantitation were found to be 2.81 and 8.53 ng/mL, respectively. The proposed method was successfully applied for the determination of the drug marketed tablet dosage form and the results were in good agreement with the reference method. Also, the method greenness was evaluated according to Complex-GAPI and analytical Eco-Scale.

Novel pure component contribution, mean centering of ratio spectra and factor based algorithms for simultaneous resolution and quantification of overlapped spectral signals: An application to recently co-formulated tablets of chlorzoxazone, aceclofenac and paracetamol.

In this work, resolution and quantitation of spectral signals are achieved by several univariate and multivariate techniques. The novel pure component contribution algorithm (PCCA) along with mean centering of ratio spectra (MCR) and the factor based partial least squares (PLS) algorithms were developed for simultaneous determination of chlorzoxazone (CXZ), aceclofenac (ACF) and paracetamol (PAR) in their pure form and recently co-formulated tablets. The PCCA method allows the determination of each drug at its λmax. While, the mean centered values at 230, 302 and 253nm, were used for quantification of CXZ, ACF and PAR, respectively, by MCR method. Partial least-squares (PLS) algorithm was applied as a multivariate calibration method. The three methods were successfully applied for determination of CXZ, ACF and PAR in pure form and tablets. Good linear relationships were obtained in the ranges of 2-50, 2-40 and 2-30µgmL(-1) for CXZ, ACF and PAR, in order, by both PCCA and MCR, while the PLS model was built for the three compounds each in the range of 2-10µgmL(-1). The results obtained from the proposed methods were statistically compared with a reported one. PCCA and MCR methods were validated according to ICH guidelines, while PLS method was validated by both cross validation and an independent data set. They are found suitable for the determination of the studied drugs in bulk powder and tablets.

Thermoanalytical investigation of some sulfone-containing drugs.

The thermal behavior of some sulfone-containing drugs, namely, dapsone (DDS), dimethylsulfone (MSM), and topiramate (TOP) in drug substances, and products were investigated using different thermal techniques. These include thermogravimetry (TGA), derivative thermogravimetry (DTG), differential thermal analysis (DTA), and differential scanning calorimetry (DSC). The thermogravimetric data allowed the determination of the kinetic parameters: activation energy (E(a)), frequency factor (A), and reaction order (n). The thermal degradation of dapsone and topiramate was followed a first-order kinetic behavior. The calculated data evidenced a zero-order kinetic for dimethylsulfone. The relative thermal stabilities of the studied drugs have been evaluated and follow the order DDS > TOP > MSM. The purity was determined using DSC for the studied compounds, in drug substances and products. The results were in agreement with the recommended pharmacopoeia and manufacturer methods. DSC curves obtained from the tablets suggest compatibility between the drugs, excipients and/or coformulated drugs. The fragmentation pathway of dapsone with mass spectrometry was taken as example, to correlate the thermal decomposition with the resulted MS-EI. The decomposition modes were investigated, and the possible fragmentation pathways were suggested by mass spectrometry.