Threading a Linear Molecule Through a Macrocycle Thanks to Boron: Optical Properties of the Threaded Species and Synthesis of a Rotaxane.

Two BODIPYs and two boron ß-diketonates were threaded through a macrocycle bearing a 2,2'-biphenol unit, showing thus the ability of boron to act as a gathering atom. The new threaded species were characterized by 1D and 2D NMR spectroscopy as well as by X-ray crystallography for one of them and their properties rationalized with quantum chemistry to unravel the vibronic contributions. The BODIPYs exhibited interesting fluorescence features with quantum yields up to 91 % and enhanced photostability compared to their non-threaded homologues. A rotaxane was synthesized using this threading strategy after stoppering and removing the boron with potassium hydroxide.

Synthesis and Characterization of Tetraphenylethene AIEgen-Based Push-Pull Chromophores for Photothermal Applications: Could the Cycloaddition-Retroelectrocyclization Click Reaction Make Any Molecule Photothermally Active?

Three new tetraphenylethene (TPE) push-pull chromophores exhibiting strong intramolecular charge transfer (ICT) are described. They were obtained via [2 + 2] cycloaddition-retroelectrocyclization (CA-RE) click reactions on an electron-rich alkyne-tetrafunctionalized TPE (TPE-alkyne) using both 1,1,2,2-tetracyanoethene (TCNE), 7,7,8,8-tetracyanoquinodimethane (TCNQ) and 2,3,5,6-tetrafluoro-7,7,8,8-tetracyanoquinodimethane (F4-TCNQ) as electron-deficient alkenes. Only the starting TPE-alkyne displayed significant AIE behavior, whereas for TPE-TCNE, a faint effect was observed, and for TPE-TCNQ and TPE-F4-TCNQ, no fluorescence was observed in any conditions. The main ICT bands that dominate the UV-Visible absorption spectra underwent a pronounced red-shift beyond the near-infrared (NIR) region for TPE-F4-TCNQ. Based on TD-DFT calculations, it was shown that the ICT character shown by the compounds exclusively originated from the clicked moieties independently of the nature of the central molecular platform. Photothermal (PT) studies conducted on both TPE-TCNQ and TPE-F4-TCNQ in the solid state revealed excellent properties, especially for TPE-F4-TCNQ. These results indicated that CA-RE reaction of TCNQ or F4-TCNQ with donor-substituted are promising candidates for PT applications.

Synthesis and Photophysical Properties of 1,1,4,4-Tetracyanobutadienes Derived from Ynamides Bearing Fluorophores.

1,1,4,4-Tetracyanobutadienes (TCBDs) bearing a large diversity of fluorophores were prepared following a multi-step synthesis. In a crucial last step, all compounds were obtained from the corresponding ynamides, which were particularly suitable for the formation of the TCBDs in the presence of tetracyanoethylene via a [2+2] cycloaddition/retroelectrocyclization step (CA-RE). Several fluorenyl derivatives in addition to phenanthrenyl and terphenyl ones provided ynamide-based TCBDs affording remarkable emission properties covering a large range of wavelengths. Those compounds emit both in solid state and in solution from the visible region to the NIR range, depending on the molecular structures. Quantum yields in cyclohexane reached unforeseen values for such derivatives, up to 7.8 %. A huge sensitivity to the environment of the TCBDs has also been unraveled for most of the compounds since we observed a dramatic fall of the quantum yields when changing the solvent from cyclohexane to toluene, while they are almost non-emissive in dichloromethane.

Two-photon absorption properties of multipolar triarylamino/tosylamido 1,1,4,4-tetracyanobutadienes.

The synthesis and characterization of four new tetracyanobutadiene (TCBD) derivatives (1, 3c and 4b-c) incorporating tosylamido and 4-triphenylamino moieties are reported. Along with those of five closely related or differently branched TCBDs derivatives (2, 3a-b, 4c and 5), their linear and (third-order) nonlinear optical properties were investigated by electronic absorption spectroscopy and Z-scan measurements. Among these compounds, the tri-branched compounds 3c and 5 are the most active two-photon absorbers, with effective cross-sections of 275 and 350 GM at 900 nm, respectively. These properties are briefly discussed with the help of DFT calculations, focussing on structural and electronic factors, and contextualized with results obtained previously for related compounds.

Helicenes Grafted with 1,1,4,4-Tetracyanobutadiene Moieties: π-Helical Push-Pull Systems with Strong Electronic Circular Dichroism and Two-Photon Absorption.

Enantiopure P- and M-carbo[6]helicenes substituted with one or two tetracyanobutadiene moieties at positions 2 and 15 have been prepared. Grafting of these electron-accepting groups onto the π-helical core resulted in strong charge-transfer effects, which greatly affected the UV/Vis, electronic circular dichroism (ECD), and two-photon absorption (TPA) responses. The ECD signal was found to be reversibly switched by applying a redox stimulus.

Unconventional Synthesis of a CuI Rotaxane with a Superacceptor Stopper: Ultrafast Excited-State Dynamics and Near-Infrared Luminescence.

A CuI bis-phenanthroline rotaxane was prepared by using the [2+2] cycloaddition-retroelectrocyclization (CA-RE) reaction to graft a bulky dicyanoquinodimethane (DCNQ) stopper. The electronic properties were investigated with electrochemical and photophysical techniques, in parallel with three reference compounds, namely, the DCNQ derivative alone, the DCNQ-based phenanthroline ligand, and an analogue CuI complex lacking the DCNQ moiety. In all the systems containing the DCNQ unit, the lowest electronic excited states are centered thereon, with the singlet level (S1 ) located at about 1.0 eV, as suggested by TDDFT calculations. Accordingly, in the DCNQ-equipped rotaxane, the typical metal-to-ligand charge-transfer luminescence of the CuI center is totally quenched. Ultrafast transient absorption and emission studies show that, in the rotaxane, the final sink of photoinduced processes is the lowest singlet state of the DCNQ moiety (S1 ), which exhibits strong charge-transfer character and a lifetime of 0.4 ps. Its deactivation leads to population of another excited state with a lifetime of 1.3 ps, which can be the related triplet state (T1 ) or a vibrationally hot level (hot-S0 ). Notably, S1 also shows stimulated fluorescence in the near-infrared (NIR) region between 1100 and 1500 nm, corroborating the TDDFT prediction. This unusual finding opens up the study of ultrashort-lived NIR luminescence in organic donor-acceptor systems.

One-step synthesis of conjugated enynenitriles from bromocyanoacetylene.

The chemical reactivity of bromocyanoacetylene has been evaluated for the first time by making it react with terminal alkynes and secondary amines in the presence of bis(triphenylphosphine)palladium dichloride and copper iodide as co-catalysts. This reaction provides new conjugated enynenitriles stereoselectively in one step in variable yields.

Linear Optical and Third-Order Nonlinear Optical Properties of Some Fluorenyl- and Triarylamine-Containing Tetracyanobutadiene Derivatives.

The synthesis and characterization of four new tetracyanobutadiene (TCBD) derivatives (1-3 and 2') incorporating 2- or 2,7-fluorenyl and diphenylamino moieties are reported. The electroactivity of 1-3 and 2' was studied by cyclic voltammetry (CV), while the linear optical and (third-order) nonlinear optical (NLO) properties were investigated by electronic spectroscopy and Z-scan studies, respectively. All experimental investigations were rationalized by DFT computations, providing an insight into the electronic structure of these derivatives and on their application potential. We show that these derivatives are nonluminescent in solution at ambient temperatures, but become fluorescent in solvent glasses. This finding constitutes an unprecedented observation for TCBD derivatives. Also, we show by Z-scan studies that these derivatives behave as two-photon absorbers in the near-IR range (800-1050 nm). These third-order NLO properties are discussed and compared with those of their alkynyl precursors (4-6), which have been investigated by two-photon excited fluorescence (TPEF).

Gas-Phase Infrared Spectroscopy of Substituted Cyanobutadiynes: Roles of the Bromine Atom and Methyl Group as Substituents.

The IR spectra of 5-bromo-2,4-pentadiynenitrile (Br-C≡C-C≡C-CN) and 2,4-hexadiynenitrile (CH3 -C≡C-C≡C-CN), a compound of interstellar interest, have been recorded within the 4000-500 cm(-1) spectral region and calculated by means of high-level ab initio and density functional calculations. Although the calculated structures of both compounds are rather similar, there are very subtle differences, mainly in the strength of the C≡C bond not directly bound to the substituent. These subtle bonding differences are reflected in small, but not negligible, differences in the electron density at the corresponding bond critical points, and, more importantly, are reflected in the IR spectra. Indeed, the IR spectrum for the bromine derivative presents two well-differentiated strong bands around 2250 cm(-1) , whereas for the methyl derivative both absorptions coalesce in a single band. These bands correspond in both cases to the coupling between C≡C and C≡N stretching displacements. A third, very weak, band also associated with C≡C and C≡N coupled stretches is observed for the bromine derivative, but not for the methyl one, owing to its extremely low intensity.

Infrared and Raman Spectroscopy of Methylcyanodiacetylene (CH3 C5 N).

A spectroscopic study combining IR absorption and Raman scattering is presented for methylcyanodiacetylene (CH3 C5 N). Gas-phase, cryogenic matrix-isolated, and pure solid-phase substance was analyzed. Out of 16 normal vibrational modes, 14 were directly observed. The analysis of the spectra was assisted by quantum chemical calculations of vibrational frequencies, IR absorption intensities, and Raman scattering activities at density functional theory and ab initio levels. Previous assignments of gas-phase IR absorption bands were revisited and extended.

Synthesis, Chemistry, and Photochemistry of Methylcyanobutadiyne in the Context of Space Science.

An alternative preparation of methylcyanobutadiyne (MeC5N), a molecule present in the interstellar medium, was established in order to circumvent tedious steps from previous methods. The possibility of forming methylcyanoacetylene and MeC5N by gas-phase photolysis was evaluated from relevant acetylene derivatives in the context of space science. The reactivity of MeC5N toward simple nucleophiles was investigated. The exclusive formation of E adducts was observed, together with a solvent dependence for the regioselectivity of the addition.

Cyclic [4]rotaxanes containing two parallel porphyrinic plates: toward switchable molecular receptors and compressors.

Twenty years ago, researchers considered the synthesis of simple rotaxanes a challenging task, but with the rapid development of this field, chemists now view these interlocking molecules as accessible synthetic targets. In a major advance for the field, researchers have developed transition metals or organic molecules as templating structures, making it easier to construct these molecular systems. In addition, chemists have found ways to introduce new functional groups, which have given these compounds new properties. Today researchers can also construct multirotaxanes consisting of several individual components, but the synthesis of the most complex structures remains challenging. This Account primarily discusses the cyclic [4]rotaxanes incorporating porphyrins that the Strasbourg group has synthesized and studied during the past few years. These cyclic [4]rotaxanes consist of two rigid rods threaded through the four rings of two molecules of a bis-macrocycle, and the synthetic strategy used for making them relies on the copper(I)-driven "gathering-and-threading" reaction. The formation of the threaded precursors was mostly quantitative, and the quadruple stoppering reaction leading to the target compound produces high yields because of the efficient copper-catalyzed azide-alkyne cycloaddition (CuAAC) or click chemistry reaction. These rotaxanes behave as receptors for various ditopic guests. We prepared and studied two types of molecules: (i) a rigid compound whose copper(I) complex has a well-defined shape, with high selectivity for the guest geometry and (ii) a much more flexible [4]rotaxane host that could act as a distensible receptor. The rigid [4]rotaxane was crystallized, affording a spectacular X-ray structure that matched the expected chemical structure. In addition, metalation or demetalation of the rigid [4]rotaxane induces a drastic geometric rearrangement. The metal-free compound is flat without a binding pocket, while the copper-complexed species forms a rectangle-like structure. The removal of copper(I) also expels any complexed guest molecule, and this process is reversible, making the rigid porphyrinic [4]rotaxane a switchable receptor. The rigid [4]rotaxane was highly selective for short, ditopic guests in its copper(I)-complexed form, but the flexible copper(I)-complexed [4]rotaxane proved to be a versatile receptor. Its conformation can adjust to the size of the guest molecule similar to the induced fit mechanism that some enzymes employ with substrates.

Straightforward synthesis of 5-bromopenta-2,4-diynenitrile and its reactivity towards terminal alkynes: a direct access to diene and benzofulvene scaffolds.

The high-yielding synthesis of 5-bromopenta-2,4-diynenitrile (BrC5 N) was achieved for the first time. Its reactivity with triisopropylsilylacetylene and triisopropylsilylbutadiyne in the presence of copper and palladium as co-catalysts and diisopropylamine was evaluated. It revealed an unprecedented cascade reaction leading to a diene in one case and to a benzofulvene in the other case, with a unique structure. Both of them were characterized by X-ray crystallography, among other techniques. The mechanism of the reaction leading to the diene was investigated experimentally. Theoretical calculations at the DFT level suggest that the mechanism leading to the benzofulvene relies on a hexa-dehydro Diels-Alder (HDDA)-type of mechanism. This work constitutes an example of an unanticipated reactivity leading to an important increase of chemical complexity.

High-yield formation of substituted tetracyanobutadienes from reaction of ynamides with tetracyanoethylene.

A high-yielding sequence of [2+2] cycloaddition-retroelectrocyclization of ynamides with tetracyanoethylene (TCNE) is described. The reaction provided tetracyanobutadiene (TCBD) species, which were characterized by various techniques. DFT and TD-DFT calculations were also performed to complement experimental findings.

Use of cleavable coordinating rings as protective groups in the synthesis of a rotaxane with an axis that incorporates more chelating groups than threaded macrocycles.

A new methodology allowing preparation of a linear "unsaturated" [3]rotaxane consisting of an axis incorporating more coordination sites than threaded rings was developed. It was based on the preliminary synthesis of a "saturated" [5]rotaxane consisting of a four-chelating site axis threaded through four macrocyclic components, two of them being cleavable rings incorporating a lactone function and the two others being "secure" non-cleavable rings. The stoppering reaction was based on click chemistry. Subsequently, cleavage and removal of the two lactone-containing macrocycles from the [5]rotaxane in basic medium afforded the desired "unsaturated" [3]rotaxane in quantitative yield.

Copper(I)-assembled [3]rotaxane whose two rings act as flapping wings.

A new copper-complexed [3]rotaxane consisting of two coordinating 30-membered rings threaded by a two-binding-site axis has been prepared in good yield from relatively simple organic fragments. The main specificity of the system originates from the stoppering reaction, based on "click" chemistry, and thus from the presence of two triazole groups at positions next to the bidentate chelates of the axis central part. The geometry of the coordinating atoms belonging to the axis is such that the triazole groups can either be part of the coordinating fragments when the metal center is 5-coordinate or be not at all involved in coordination to the metal when the latter is 4-coordinate. To be more specific, when the two complexed metal centers are monovalent copper(I) centers, the triazoles are not included in the metal coordination sphere, whereas when the metal centers are Cu(II) or Zn(2+), the triazole groups are bound to the metals. This is easily explained by the fact that Cu(I) is preferably 4-coordinate and Cu(II) and Zn(2+) are 5-coordinate. The interconversion between both situations (4- or 5-coordinate) can be quantitatively induced by metal exchange (Cu(I)/Zn(2+)) or by a redox process (Cu(II)/Cu(I)). It leads to important geometrical changes and in particular to a strong modification of the angle between the two rings. As a consequence, the two threaded rings undergo a motion which is reminiscent of a wing-flapping movement similar to that of birds. This flapping motion is fast and quantitative. It should lead to new functional molecular machines in the future.

NIR emission of cyclic [4]rotaxanes containing π-extended porphyrin chromophores.

The photophysical properties of a Cu(I) [4]rotaxane 4(4+) and of the demetalated [4]rotaxane 3 have been determined and compared to those of the component Zn porphyrin 2. All samples emit in the NIR region (700-1200 nm). The luminescence from the interlocked structures is bathochromically shifted with respect to 2 and displays a lower emission quantum yield, much lower for 4(4+) than for 3. The occurrence of intra-molecular electron or energy transfer is excluded and the decrease in luminescence yield is discussed in terms of the energy gap law and of electronic interactions between components of the cyclic interlocked structure. In toluene a dual emission behavior, similar to that of 2, is observed for 3 and ascribed to the presence of two non-equilibrated excited states, π-π* and CT in nature with lifetimes of 0.80 and 0.14 ns, respectively.

Synthesis of [5]rotaxanes containing bi- and tridentate coordination sites in the axis.

A new example of a linear [5]rotaxane has been synthesized by using the traditional "gathering-and-threading" approach but based on an unusual axle incorporating a symmetrical bis(bidentate) chelating fragment built on a 4,7-phenanthroline core. The stoppering reaction is particularly noteworthy since, instead of using a trivial bulky stopper as precursor to the blocking group, two semistoppered copper-complexed [2]pseudorotaxanes (namely [2]semirotaxanes) are used, which leads to the desired [5]rotaxane in good yield. The efficiency of the method relies on the use of "click" chemistry, with its very mild conditions, and on the protection by a transition-metal (copper(I)) of the various coordinating groups present in the fragments to be interconnected (terpy and bidentate chelating groups), thus inhibiting potential detrimental side reactions during the copper-catalyzed stoppering reaction. Since the external fragments and the central core of the system contain tri- and bidentate chelating units, respectively, the axle of the final [5]rotaxane incorporates two types of coordinating units: two external terpy groups (terpy: 2,2':6',2''-terpyridine) and two central bidentate ligands. Such a situation enables the system to tidy two different metals centers, and to localize them in a priori well-defined positions. This is what was observed when mixing the free ligand with a mixture of Zn(2+) and Li(+) : the zinc(II) ions were unambiguously shown to occupy the external sites, whereas the Li(+) cations were found in the central part of the [5]rotaxane. An X-ray diffraction study carried out on a [3]pseudorotaxane, the axis of which is similar to the central part of the [5]rotaxane axle, demonstrates that Zn(2+) is clearly five-coordinate, the fifth ligand being a counterion, even when the coordination site of the pseudorotaxane is designed for four-coordinate metals, which is in marked contrast with copper(I) or Li(+) .

1,1,4,4-Tetracyanobutadiene-Functionalized Anthracenes: Regioselectivity of Cycloadditions in the Synthesis of Small Near-IR Dyes.

Two small 1,1,4,4-tetracyanobutadiene-functionalized chromophores were obtained by careful leverage of the regioselectivity of the cycloaddition reaction of tetracyanoethylene with anthracene-ynamide derivatives, inducing either a [2 + 2] or a [4 + 2] Diels-Alder process. DFT calculations unraveled the mechanism of the [2 + 2] cycloaddition-retroelectrocyclization reaction sequence with ynamides and elucidated the differing mechanisms in the two substrates. The synthesized dyes presented panchromatic absorption extending into the near-IR and far-red/near-IR photoluminescence in the solid state up to 1550 nm.

Templated synthesis of cyclic [4]rotaxanes consisting of two stiff rods threaded through two bis-macrocycles with a large and rigid central plate as spacer.

Two related cyclic [4]rotaxanes consisting of double macrocycles and rigid rods incorporating two bidentate chelates have each been prepared in high yield. The first step is a multigathering and threading reaction driven by coordination of two different bidentate chelates (part of either the rings or the rods) to each copper(I) center so as to afford the desired precursor. In both cases, the assembly step is done under very mild conditions, and it is quantitative. The second key reaction is the stopper-attaching reaction, based on click chemistry. Even if the quadruple stoppering reaction is not quantitative, it is relatively high-yielding (60% and 95%), and the copper-driven assembly process is carried out at room temperature without any aggressive reagent. The final copper-complexed [4]rotaxanes obtained contain two aromatic plates roughly parallel to one another located at the center of each bis-macrocycle. In the most promising case in terms of host-guest properties, the plates are zinc(II) porphyrins of the tetra-aryl series. The compounds have been fully characterized by various spectroscopic techniques ((1)H NMR, mass spectrometry, and electronic absorption spectroscopy). Unexpectedly, the copper-complexed porphyrinic [4]rotaxane could be crystallized as its 4PF(6)(-) salt to afford X-ray quality crystals. The structure obtained is in perfect agreement with the postulated chemical structure of the compound. It is particularly attractive in terms of symmetry and molecular aesthetics. The distance between the zinc atoms of the two porphyrins is 8.673 A, which is sufficient to allow insertion between the two porphyrinic plates of small ditopic basic substrates able to interact with the central porphyrinic Zn atoms. This prediction has been confirmed by absorption spectroscopy measurements in the presence of various organic substrates. However, large substrates cannot be introduced in the corresponding recognition site and are thus complexed mostly in an exo fashion, being located outside the receptor cavity. Noteworthy, the stability constants of the 1:1 host-guest complexes are high (10(7) M(-1)).