Occurrences, sources, fate and impacts of plastic on aquatic organisms and human health in global perspectives: What Bangladesh can do in future?

Bangladesh is not an exception to the growing global environmental problem of plastic pollution. Plastics have been deemed a blessing for today's world thanks to their inexpensive production costs, low weight, toughness, and flexibility, but poor biodegradability and massive misuse of plastics are to blame for widespread contamination of the environmental components. Plastic as well as microplastic pollution and its adverse consequences have attracted significant investigative attention all over the world. Plastic pollution is a rising concern in Bangladesh, but scientific studies, data, and related information are very scarce in numerous areas of the plastic pollution problem. The current study examined the effects of plastic and microplastic pollution on the environment and human health, and it examined Bangladesh's existing knowledge of plastic pollution in aquatic ecosystems in light of the rapidly expanding international research in this field. We also made an effort to investigate the current shortcomings in Bangladesh's assessment of plastic pollution. This study proposed several management approaches to the persistent plastic pollution problem by analyzing studies from industrialized and emerging countries. Finally, this work pushed investigators to investigate Bangladesh's plastic contamination thoroughly and develop guidelines and policies to address the issue.

Competitive sorption and availability of coexisting heavy metals in mining-contaminated soil: Contrasting effects of mesquite and fishbone biochars.

Mesquite and fishbone were pyrolyzed to produce biochar (MBC and FBC, respectively) at different temperatures. The effects of the MBC and FBC on the removal of single and competitive metals (Cd, Pb, Zn, and Cu) from aqueous solutions were evaluated. A greenhouse pot experiment was also conducted using wheat plants with the mining-contaminated soils. In the presence of MBC or FBC (dosages of 15 and 30 g kg-1), the bioavailability of co-existing Cd, Pb, Zn, Cu, Mn, and Fe were assessed. The results clearly indicated competitive adsorption among metals with the highest adsorption preference toward Pb. The removal efficiency and partition coefficient (PC) values of heavy metals for FBCs were higher than those for MBCs. These two values increased with MBC pyrolysis temperature under both single- and multi-metals adsorption conditions. Applying FBC to mining soil resulted in the highest reduction in most NH4NO3-extractable heavy metals, reducing their availability to wheat plants. At the highest application dosage of 30 g kg-1, the highest metal immobilization, which accounted for 40.0% and 43.0% for Pb, 61.7% and 66.2% for Cu, 48.3% and 55.6% for Zn, and 32.7% and 33.8% for Cd, was achieved following the application of FBC400 and FBC600, respectively. However, applying MBC lead to a significant reduction in the availability of Cu and Pb but not that of Zn and Cd. FBC is thus more effective in removing heavy metal from aqueous solutions, as well as in immobilizing co-existing heavy metals in contaminated mining soil. It could, therefore, be an effective sorbent and immobilizing agent.

Key internal factors leading to the variability in CO2 fixation efficiency of different sulfur-oxidizing bacteria during autotrophic cultivation.

Variability in the apparent CO2 fixation yield of four aerobic sulfur-oxidizing bacteria (Halothiobacillus neapolitanus DSM 15147, Thiobacillus thioparus DSM 505, Thiomonas intermedia DSM 18155, and Starkeya novella DSM 506) in autotrophic culturing was studied, and mutual effects of key intrinsic factors on CO2 fixation were explored. DSM 15147 and DSM 505 exhibited much higher CO2 fixation yields than DSM 18155 and DSM 506. The differences in CO2 fixation yield were determined not only by cbb gene transcription, but also by cell synthesis rate, which was determined by rRNA gene copy number; the rRNA gene copy number had a more significant effect than cbb gene transcription on the apparent CO2 fixation yield. Moreover, accumulation of EDOC was observed in all four strains during chemoautotrophic cultivation, and the proportion of EDOC accounting for total fixed organic carbon (TOC; EDOC/TOC ratio) was much higher in DSM 18155 and DSM 506 than in DSM 15147 and DSM 505. The accumulation of EDOC led to a significant decrease in the cbb gene transcription efficiency during cultivation, and a further feedback inhibitory effect on CO2 fixation.

Regeneration, degradation, and toxicity effect of MOFs: Opportunities and challenges.

Metal organic frameworks (MOFs) have been investigated extensively for separation, storage, catalysis, and sensing applications. Nonetheless, problems associated with their toxicity, recycling/reuse/regeneration, and degradation have yet to be addressed as one criterion to satisfy their commercialization. Here, the challenges associated with MOF-based technology have been explored to further expand their practical utility in various applications. We start a brief description of challenges associated with MOF-based technology followed by a critical evaluation of toxicity and need of technical options for regeneration of MOFs. Importantly, diverse techniques/process for reuse and regeneration of MOFs like activation of MOFs by heat, vacuum, solvent exchange, supercritical carbon dioxide (SCCO2) and other miscellaneous options have been discussed with recent examples. Afterward, we also present an economical aspect and future perspectives of MOFs for real world applications. All in all, we aimed to present opportunities and critical review of the current status of MOF technology with respect to their recycling/reuse/regeneration to consider their environmental impact.

Surfactant-modified Zn/Al-layered double hydroxides for efficient extraction of alkyl phenols from aqueous samples.

Zn/Al-layered double hydroxides (LDHs) modified by sodium dodecylsulfate (SDS) were synthesized as a hydrophobic organic sorbent via urea hydrolysis. LDHs were applied as adsorbent for solid phase extraction (SPE) analysis to determine three alkylphenols (namely, p-tert-amylphenol (PTAP), p-cumylphenol (PCP), and p-n-octylphenol (POP)) in water samples using gas chromatography-mass spectrometry. The extraction efficiency was optimized by adjusting key variables of eluent volume, eluent type, sample flow rate, adsorbent amount, pH, and the effect of salt addition. Under the optimal conditions, APs showed excellent linearity (1-250 ng/mL: R2 > 0.99) and reproducibility (relative standard deviation: <5%). The detection limits for PTAP, PCP, and POP were 19, 16, and 33 pg/mL, respectively. LDHs based SPE method offered high recovery for aqueous samples (e.g., 83.2-99.46%) with enhanced reusability (e.g., up to 10 cycles). The feasibility of the developed method has thus been validated for quantitation of three alkyl phenols (i.e., PTAP, PCP, and POP) in aqueous environmental samples with high sensitivity and good stability.

Can multiple harvests of plants improve nitrogen removal from the point-bar soil of lake?

Point bar areas around lakes can provide ecological service functions. For example, plants growing on point bars absorb and remove nutrients from the soil and water. However, if the point-bar plants are unregulated, in the fall and winter, plant debris will decompose, releasing nutrients that then enter the water body and cause eutrophication. Therefore, any harvesting should be managed. But how to harvest plants and how often to harvest them, and there is little research on these. In this study, the point bar at Qingcaosha Reservoir was used to study the effects of three plant harvesting modes (M1: unharvested; M2: one harvest in the fall; and M3: one harvest in summer and one in the fall) on the removal of nitrogen (N) from point-bar soil. The largest amount of N was removed by the plants when the M3 mode was used (26.93 g/m2). However, the M2 mode removed the most N from the soil during the plant growth season (81.62 g/m2), which implied that the nitrification and denitrification effects of soil microorganisms make the largest contribution to N removal from this point-bar soil. The nitrification and denitrification activity of microorganisms was higher for M2 than for M1 and M3 in the following year. Additionally, summer harvesting (M3) had a negative effect on nitrification efficiency in the current season because anaerobic bacteria in the soil significantly increased and nitrifying bacteria significantly decreased after harvesting. However, after a period of recovery, the number of microbial nitrifiers increased again and nitrification activity rose in the following year. The reduction in oxygen supply after harvesting may be the main reason for low nitrification in the current season, but it was beneficial to nitrification and denitrification in the following year because there was luxuriant plant growth. Therefore, when considering both the current season and the following year, harvesting should not be too frequent and one harvest in the fall (M2) led to the largest removal of N from the soil.

Dissolved organic matter characterization of biochars produced from different feedstock materials.

Fluorescence excitation-emission matrix (EEM) spectroscopy coupled with parallel factor analysis (PARAFAC) enables better understanding of the nature of dissolved organic matter (DOM). In the current study, we characterized 10 biochar samples produced from different feedstocks using EEM/PARAFAC analysis. The composition and distribution of DOM substances present in biochar varied significantly according to feedstock, activation, and pyrolysis temperature. The integration of proximate and ultimate analyses of the solid phase together with water extractable organic matter (WEOM) phase of biochar provided new insights into the characterization of biochars, including nature and functionality. Characterization of both WEOM and solid phases is recommended for biochar research before large-scale production for various environmental and industrial applications.

Fabricating biogenic Fe(III) flocs from municipal sewage sludge using NAFO processes: Characterization and arsenic removal ability.

This study involved fabricating biogenic Fe(III) flocs enriched from municipal sludge using microbial nitrate-dependent anaerobic Fe(II)-oxidizing (NAFO) processes. The research focused on bacterial community compositions and physicochemical properties of the biogenic Fe(III) flocs and their ability to adsorb arsenic (As). High-throughput sequencing analysis showed that significant microbial succession occurs in the raw sludge after the NAFO processes. The predominant bacterial communities in the biogenic Fe(III) flocs included Rhodanobacter, Parvibaculum, Gemmatimonas and Segetibacter genera. Microscopic and spectroscopic analyses included scanning electron microscopy - energy disperse spectroscopy (SEM-EDS), X-ray diffraction (XRD), Fourier transform infrared spectroscopy (FTIR) and Raman spectroscopy. These tests indicated that biogenic Fe(III) flocs were a mixture of NAFO bacteria and nanosized, poorly crystalline Fe(III) oxide particles. Batch experiments showed that after 120 min of reaction time, more than 95% of As(III) and As(V) (at an initial concentrations of 0.25 mg/L) were effectively removed with 120 ppm biogenic Fe(III) flocs. In addition, biogenic Fe(III) flocs removed As more effectively than abiotic Fe(III) flocs. These findings indicated that biogenic Fe(III) flocs produced from municipal sludge using NAFO processes performed well in removing As.

A comprehensive review of anaerobic digestion of organic solid wastes in relation to microbial community and enhancement process.

Organic solid wastes (OSWs) should be regarded as valuable resources rather than dead-end landfill waste that causes public health and odor concerns. Anaerobic digestion (AD) is an ideal approach for managing organic solid waste issues and involves using a group of anaerobic microorganisms to transform OSWs into useful products. In this review, over 100 publications related to AD of OSWs have been compiled, discussed, and analyzed. A comprehensive analysis of the environmental and safety impacts of AD, its key environmental factors, co-digestion, and pretreatment, as well as the AD of OSWs by various anaerobic microbes uncovered by high throughput sequencing-based approaches, is presented. The purpose of this review is to provide an outline of the current knowledge of AD processes from a multi-angle perspective. A comprehensive understanding of AD of OSWs and genome-enabled biology development could be helpful for providing up-to-date knowledge of AD, developing it, overcoming its drawbacks and, ultimately, improving global waste control for more efficient environmental management. © 2018 Society of Chemical Industry.

Preparation of nitrogen-doped Cu-biochar and its application into catalytic reduction of p-nitrophenol.

Nitrogen-doped copper-biochar (N-Cu-biochar) was synthesized via pyrolysis of glucose in the presence of copper and melamine and used as a catalyst in the reduction of p-nitrophenol by NaBH4. N-Cu-biochar was characterized by field emission scanning electron microscopy/energy-dispersive spectroscopy, Raman spectroscopy, X-ray Diffraction, and Brunauer-Emmett-Teller surface analyzer. The catalytic performance of N-Cu-biochar was evaluated under varying conditions of NaBH4 concentration, biochar dosage, and initial p-nitrophenol concentration. N-Cu-biochar was composed of ~83% C, ~9% O, and ~8% Cu, with Cu/Cu2O phases evenly dispersed on graphitic carbon aggregates possessing both macro- and meso-pores. N-Cu-biochar showed superior catalytic ability in mediating p-nitrophenol reduction as compared to Cu-biochar and N-doped biochar, achieving complete reduction of 0.35 mM p-nitrophenol within 30 min at a dose of 0.25 g L-1. Reduction of p-nitrophenol catalyzed by N-Cu-biochar followed pseudo-first-order kinetics, and the reaction rate was dependent upon NaBH4 concentration. The overall results indicate that biochar can be a suitable candidate as a support for catalyst synthesis, and N-doped Cu-biochar can be a promising catalyst for the reduction of p-nitrophenol.

Analysis of fatty acids in mouse tissue via in situ transmethylation with biochar.

Lipid derivatization technology-mediated fatty acid profiling studies have been suggested to dissect the contents of lipids in white fat and brown fat tissue. The focus of this study is to profile fatty acid lipidomics in brown adipose tissue and white adipose tissue of mice by derivatizing their lipids into fatty acid methyl esters via in situ transmethylation using a rice husk-derived biochar as porous media. The in situ transmethylation using biochar is advantageous in biological analysis because there was no loss of samples inevitably occurring in the loss of lipid in solvent extraction and purification steps.

A critical review of ferrate(VI)-based remediation of soil and groundwater.

Over the past few decades, diverse chemicals and materials such as mono- and bimetallic nanoparticles, metal oxides, and zeolites have been used for soil and groundwater remediation. Ferrate (FeVIO42-) has been widely employed due to its high-valent iron (VI) oxo compound with high oxidation/reduction potentials. Ferrate has received attention for wide environmental applications including water purification and sewage sludge treatment. Ferrate provides great potential for diverse environmental applications without any environmental problems. Therefore, this paper provides comprehensive information on the recent progress on the use of (FeVIO42-) as a green material for use in sustainable treatment processes, especially for soil and water remediation. We reviewed diverse synthesis recipes for ferrates (FeVIO42-) and their associated physicochemical properties as oxidants, coagulants, and disinfectants for the elimination of a diverse range of chemical and biological species from water/wastewater samples. A summary of the eco-sustainable performance of ferrate(VI) in water remediation is also provided and the future of ferrate(VI) is discussed in this review.

Enhanced roles of biochar and organic fertilizer in microalgae for soil carbon sink.

Improved soil carbon sink capability is important for the mitigation of carbon dioxide emissions and the enhancement of soil productivity. Biochar and organic fertilizer (OF) showed a significant improving effect on microalgae in soil carbon sink capacity, and the ultimate soil total organic carbons with microalgae-OF, microalgae-biochar, microalgae-OF-biochar were about 16, 67 and 58% higher than that with microalgae alone, respectively, indicating that carbon fixation efficiency of microalgae applied in soil was improved with biochar and OF whilst the soil carbon capacity was promoted, the mechanism of which is illustrated through simulative experiments. Organic fertilizer could spur algal conversion of carbon into cell molecules by increasing intracellular polysaccharide production of microalgae. Biochar could change carbon metabolism pathway of microalgae through altering the yield of intracellular saccharides, and yield and type of extracellular saccharides. There was a superimposition effect on the soil carbon sink when biochar and OF were both present with microalgae.

Industrial robustness linked to the gluconolactonase from Zymomonas mobilis.

The physiological characteristics and the potential gluconolactone production of the gluconolactonase-deficient strain, Zymomonas mobilis ZM4 gnlΔ, were investigated via growth inhibitory assay and biotransformation of glucose and fructose into gluconolactone and sorbitol, respectively. The results of ethanol fermentation studies performed in the presence of high concentration of glucose (>200 g l-1) under fermentative or aerobic conditions indicated that a significant reduction of volumetric ethanol productivity from the strain of ZM4 gnlΔ was noticeable due to the reduced rates of specific growth, sugar uptake, and biomass yield as compared with those of the parental strain ZM4. The biotransformation prepared at pH 6.0 using the permeabilized cell indicated that gluconic acid from ZM4 gnlΔ was still produced as a major product (67 g l-1) together with sorbitol (65 g l-1) rather than gluconolactone after 24 h. Only small amount of gluconolactone was transiently overproduced up to 9 g l-1, but at the end of biotransformation, all gluconolactone were oxidized into gluconic acid. This indicated that autolysis of gluconolactone at the pH led to such results despite under gluconolactonase inactivation conditions. The physiological characteristics of ZM4 gnlΔ was further investigated under various stress conditions, including suboptimal pH (3.5~6.0), temperature (25~40 °C), and presence of growth inhibitory molecules including hydrogen peroxide, ethanol, acetic acid, furfural, and so forth. The results indicated that ZM4 gnlΔ was more susceptible at high glucose concentration, low pH of 3.5, and high temperature of 40 °C and in the presence of 4 mM H2O2 comparing with ZM4. Therefore, the results were evident that gluconolactonase in Z. mobilis contributed to industrial robustness and anti-stress regulation.

Transformation of dissolved organic matter in concentrated leachate from nanofiltration during ozone-based oxidation processes (O3, O3/H2O2 and O3/UV).

In this study, the transformation of dissolved organic matter (DOM) in nanofiltration concentrated leachate during three ozone-based oxidation processes (i.e., O3, O3/H2O2 and O3/UV) was investigated. The transformation characteristics of DOM were evaluated by gel filtration chromatography (GFC), XAD-8 resin fractionation, excitation-emission matrix fluorescence spectroscopy (EEM) and Fourier transform infrared spectroscopy (FTIR). Compared with O3-alone process, the removal efficiencies of COD, TOC, and color were improved in O3-combined processes (i.e., O3/H2O2 and O3/UV) approximately by 10-15%, 7-15%, and 15-20%, respectively. Humic acid (HA) was completely degraded and preferentially reacted with the oxidants during ozonation processes. HA was first converted into fulvic acid (FA), and then the majority of these intermediates were further converted to hydrophilic fraction (HyI). The GFC results indicated that the broader molecular weight distribution of DOM was observed, and high molecular weight DOM (i.e., 0.45 µm-100 kDa) was successfully converted to low molecular weight organics in the range of 1-10 kDa after ozonation reactions. The EEM spectra also showed that HA and FA were effectively converted into HyI after ozonation for 90 min. It is suggested that ozone-based oxidation processes could effectively change the DOM distribution and fluorescence features of concentrated leachate.

Towards Sustainable Production of Polybutylene Adipate Terephthalate: Non-biological Catalytic Syntheses of Biomass-derived Constituents.

Renewable chemicals, which are made from renewable resources such as biomass, have attracted significant interest as substitutes for natural gas- or petroleum-derived chemicals to enhance the sustainability of the chemical and petrochemical industries. Polybutylene adipate terephthalate (PBAT), which is a copolyester of 1,4-butanediol (1,4-BDO), adipic acid (AA), and dimethyl terephthalate (DMT) or terephthalic acid (TPA), has garnered significant interest as a biodegradable polymer. This study assesses the non-biological production of PBAT monomers from biomass feedstocks via heterogeneous catalytic reactions. The biomass-based catalytic routes to each monomer are analyzed and compared to conventional routes. Although no fully commercialized catalytic processes for direct conversion of biomass into 1,4-BDO, AA, DMT, and TPA are available, emerging and promising catalytic routes have been proposed. The proposed biomass-based catalytic pathways toward 1,4-BDO, AA, DMT, and TPA are not yet fully competitive with conventional fossil fuel-based pathways mainly due to high feedstock prices and the existence of other alternatives. However, given continuous technological advances in the renewable production of PBAT monomers, bio-based PBAT should be economically viable in the near future.

Thermal hydrolysis alleviates polyethylene microplastic-induced stress in anaerobic digestion of waste activated sludge.

Microplastics are known to negatively affect anaerobic digestion (AD) of waste activated sludge. However, whether thermal hydrolysis (TH) pretreatment alters the impact of microplastics on sludge AD remains unknown. Herein, the effect of TH on the impact of polyethylene (PE) microplastics in sludge AD was investigated. The results showed that the inhibition of methane production by PE at 100 particles/g total solids (TS) was reduced by 31.4% from 12.1% to 8.3% after TH at 170 °C for 30 min. Mechanism analysis indicated TH reduced the potential for reactive oxygen species production induced by PE, resulting in a 29.1 ± 5.5% reduction in cell viability loss. In addition, additive leaching increased as a result of rapid aging of PE microplastics by TH. Acetyl tri-n-butyl citrate (ATBC) release from PE with 10 and 100 particles/g TS increased 11.5-fold and 8.6-fold after TH to 68.2 ± 5.5 µg/L and 124.0 ± 5.1 µg/L, respectively. ATBC at 124.0 µg/L increased methane production by 21.4%. The released ATBC enriched SBR1031 and Euryarchaeota, which facilitate the degradation of proteins and promote methane production. This study reveals the overestimated impact of PE microplastics in sludge AD and provides new insights into the PE microplastics-induced impact in practical sludge treatment and anaerobic biological processes.

Stabilization mechanism and long-term stability of endogenous heavy metals in manure-derived biochar.

Pyrolysis has been proposed to stabilize heavy metals present in livestock manure. However, many studies have not considered the applicability of manure-derived biochar containing endogenous heavy metals as an agricultural fertilizer. This study investigated the mechanisms through which pyrolysis stabilizes endogenous heavy metals in swine manure and the long-term stability of endogenous heavy metals in the biochar. As pyrolysis temperature increased from 300 °C to 700 °C, the potential ecological risk index decreased from 46.3 to 4.8 because the unstable fraction converted to organic-sulfide bonds and residues. Biochar prepared at 600 °C was the most stable and met the World Health Organization's phyto-availability standards (Cu 10 mg/kg, Zn 0.6 mg/kg). Fourier transform infrared spectroscopy and X-ray diffraction analyses indicated that endogenous heavy metals were stabilized by complexation with organic matter and precipitated as metal-phosphate forms. After 40 cycles of wet-dry aging, the leachability of heavy metals (Cu 6.0 mg/kg, Zn 460.6 mg/kg) from biochar was still lower than that of swine manure (Cu 102.5 mg/kg and Zn 704.9 mg/kg), indicating the long-term stability of the heavy metals in the biochar. Pyrolysis dramatically lowered the environmental threat posed by endogenous heavy metals, demonstrating the applicability of swine manure-derived biochar compared to manure.