RESUMEN
Understanding the biological impacts of plastic pollution requires an effective methodology to detect unlabeled microplastics in environmental samples. Detecting unlabeled microplastics in an organism generally requires a digestion protocol, which results in the loss of spatial information on the distribution of microplastic within the organism and could lead to the disappearance of the smaller plastics. Fluorescence microscopy allows visualization of ingested microplastics but many labeling strategies are nonspecific and label biomass, thus limiting our ability to distinguish internalized plastics. While prelabeled plastics can be used to avoid nonspecific labeling, this approach precludes the detection of environmental microplastics in organisms. Also, using prelabeled microplastics can affect the viability of the organism and impact plastic uptake. Thus, a method was developed that employs nonspecific labeling with a tissue-clearing technique. Briefly, unlabeled microplastics are stained with a fluorescent dye after ingestion by the organism. The tissue-clearing technique then removes tissue-bound dye while rendering the structurally intact organism transparent. The internalized plastics remain stained and can be visualized in the cleared tissue with fluorescence microscopy. The technique is demonstrated using polystyrene beads in living aquatic organismsTigriopus californicusandDaphnia magnaand by spiking a model vertebrate (Cephalochordata) with different microplastics.
Asunto(s)
Microplásticos , Contaminantes Químicos del Agua , Plásticos , Imagenología Tridimensional , Contaminantes Químicos del Agua/análisis , Poliestirenos , Monitoreo del AmbienteRESUMEN
Understanding of nanoplastic prevalence and toxicology is limited by imaging challenges resulting from their small size. Fluorescence microscopy is widely applied to track and identify microplastics in laboratory studies and environmental samples. However, conventional fluorescence microscopy, due to diffraction, lacks the resolution to precisely localize nanoplastics in tissues, distinguish them from free dye, or quantify them in environmental samples. To address these limitations, we developed techniques to label nanoplastics for imaging with stimulated emission depletion (STED) microscopy to achieve resolution at an order of magnitude superior to conventional fluorescence microscopy. These techniques include (1) passive sorption; (2) swell incorporation; and (3) covalent coupling of STED-compatible fluorescence dyes to nanoplastics. We demonstrate that our labeling techniques, combined with STED microscopy, can be used to resolve nanoplastics of different shapes and compositions as small as 50 nm. The longevity of dye labeling is demonstrated in different media and conditions of biological and environmental relevance. We also test STED imaging of nanoplastics in exposure experiments with the model worm Caenorhabditis elegans. Our work shows the value of the method for detection and localization of nanoplastics as small as 50 nm in a whole animal without disruption of the tissue. These techniques will allow more precise localization and quantification of nanoplastics in complex matrices such as biological tissues in exposure studies.
Asunto(s)
Microplásticos , Plásticos , Animales , Caenorhabditis elegans , Microscopía FluorescenteRESUMEN
Artificial athletic turf containing crumb rubber (CR) from shredded tires is a growing environmental and public health concern. However, the associated health risk is unknown due to the lack of toxicity data for higher vertebrates. We evaluated the toxic effects of CR in a developing amniote vertebrate embryo. CR water leachate was administered to fertilized chicken eggs via different exposure routes, i.e., coating by dropping CR leachate on the eggshell; dipping the eggs into CR leachate; microinjecting CR leachate into the air cell or yolk. After 3 or 7 d of incubation, embryonic morphology, organ development, physiology, and molecular pathways were measured. The results showed that CR leachate injected into the yolk caused mild to severe developmental malformations, reduced growth, and specifically impaired the development of the brain and cardiovascular system, which were associated with gene dysregulation in aryl hydrocarbon receptor, stress-response, and thyroid hormone pathways. The observed systematic effects were probably due to a complex mixture of toxic chemicals leaching from CR, such as metals (e.g., Zn, Cr, Pb) and amines (e.g., benzothiazole). This study points to a need to closely examine the potential regulation of the use of CR on playgrounds and artificial fields.
Asunto(s)
Materiales de Construcción/toxicidad , Exposición a Riesgos Ambientales/análisis , Goma/toxicidad , Animales , Encéfalo/efectos de los fármacos , Encéfalo/embriología , Sistema Cardiovascular/efectos de los fármacos , Sistema Cardiovascular/embriología , Embrión de Pollo , Desarrollo Embrionario , Salud Ambiental , Reciclaje , Pruebas de ToxicidadRESUMEN
The emergence and spread of extended-spectrum ß-lactamases (ESBLs), metallo-ß-lactamases (MBLs), or variant low-affinity penicillin-binding proteins (PBPs) pose a major threat to our ability to treat bacterial infection using ß-lactam antibiotics. Although combinations of ß-lactamase inhibitors with ß-lactam agents have been clinically successful, there are no MBL inhibitors in current therapeutic use. Furthermore, recent clinical use of new-generation cephalosporins targeting PBP2a, an altered PBP, has led to the emergence of resistance to these antimicrobial agents. Previous work shows that natural polyphenols such as cranberry-extracted proanthocyanidins (cPAC) can potentiate non-ß-lactam antibiotics against Gram-negative bacteria. This study extends beyond previous work by investigating the in vitro effect of cPAC in overcoming ESBL-, MBL-, and PBP2a-mediated ß-lactam resistance. The results show that cPAC exhibit variable potentiation of different ß-lactams against ß-lactam-resistant Enterobacteriaceae clinical isolates as well as ESBL- and MBL-producing E. coli We also discovered that cPAC have broad-spectrum inhibitory properties in vitro on the activity of different classes of ß-lactamases, including CTX-M3 ESBL and IMP-1 MBL. Furthermore, we observe that cPAC selectively potentiate oxacillin and carbenicillin against methicillin-resistant but not methicillin-sensitive staphylococci, suggesting that cPAC also interfere with PBP2a-mediated resistance. This study motivates the need for future work to identify the most bioactive compounds in cPAC and to evaluate their antibiotic-potentiating efficacy in vivoIMPORTANCE The emergence of ß-lactam-resistant Enterobacteriaceae and staphylococci compromises the effectiveness of ß-lactam-based therapy. By acquisition of ESBLs, MBLs, or PBPs, it is highly likely that bacteria may become completely resistant to the most effective ß-lactam agents in the near future. In this study, we described a natural extract rich in proanthocyanidins which exerts adjuvant properties by interfering with two different resistance mechanisms. By their broad-spectrum inhibitory ability, cranberry-extracted proanthocyanidins could have the potential to enhance the effectiveness of existing ß-lactam agents.
Asunto(s)
Ampicilina/farmacología , Antibacterianos/farmacología , Bacterias/efectos de los fármacos , Cefotaxima/farmacología , Proantocianidinas/farmacología , Vaccinium macrocarpon , Bacterias/crecimiento & desarrollo , Sinergismo Farmacológico , Resistencia betalactámica/efectos de los fármacosRESUMEN
Nanopillars have been shown to mechanically damage bacteria, suggesting a promising strategy for future antibacterial surfaces. However, the mechanisms underlying this phenomena remain unclear, which ultimately limits translational potential toward real-world applications. Using real-time and end-point analysis techniques, we demonstrate that in contrast to initial expectations, bacteria on multiple hydrophilic "mechano-bactericidal" surfaces remained viable unless exposed to a moving air-liquid interface, which caused considerable cell death. Reasoning that normal forces arising from surface tension may underlie this mechano-bactericidal activity, we developed computational and experimental models to estimate, manipulate, and recreate the impact of these forces. Our experiments together demonstrate that a critical level of external force acting on cells attached to nanopillar surfaces can rapidly deform and rupture bacteria. These studies provide fundamental physical insight into how nanopillar surfaces can serve as effective antibacterial materials and suggest use-conditions under which such nanotechnology approaches may provide practical value.
Asunto(s)
Nanoestructuras , Antibacterianos/farmacología , Bacterias , Nanotecnología , Propiedades de SuperficieRESUMEN
The vast amount of plastic waste emitted into the environment and the increasing concern of potential harm to wildlife has made microplastic and nanoplastic pollution a growing environmental concern. Plastic pollution has the potential to cause both physical and chemical harm to wildlife directly or via sorption, concentration, and transfer of other environmental contaminants to the wildlife that ingest plastic. Small particles of plastic pollution, termed microplastics (>100 nm and <5 mm) or nanoplastics (<100 nm), can form through fragmentation of larger pieces of plastic. These small particles are especially concerning because of their high specific surface area for sorption of contaminants as well as their potential to translocate in the bodies of organisms. These same small particles are challenging to separate and identify in environmental samples because their size makes handling and observation difficult. As a result, our understanding of the environmental prevalence of nanoplastics and microplastics is limited. Generally, the smaller the size of the plastic particle, the more difficult it is to separate from environmental samples. Currently employed passive density and size separation techniques to isolate plastics from environmental samples are not well suited to separate microplastics and nanoplastics. Passive flotation is hindered by the low buoyancy of small particles as well as the difficulty of handling small particles on the surface of flotation media. Here we suggest exploring alternative techniques borrowed from other fields of research to improve separation of the smallest plastic particles. These techniques include adapting active density separation (centrifugation) from cell biology and taking advantage of surface-interaction-based separations from analytical chemistry. Furthermore, plastic pollution is often challenging to quantify in complex matrices such as biological tissues and wastewater. Biological and wastewater samples are important matrices that represent key points in the fate and sources of plastic pollution, respectively. In both kinds of samples, protocols need to be optimized to increase throughput, reduce contamination potential, and avoid destruction of plastics during sample processing. To this end, we recommend adapting digestion protocols to match the expected composition of the nonplastic material as well as taking measures to reduce and account for contamination. Once separated, plastics in an environmental sample should ideally be characterized both visually and chemically. With existing techniques, microplastics and nanoplastics are difficult to characterize or even detect. Their low mass and small size provide limited signal for visual, vibrational spectroscopic, and mass spectrometric analyses. Each of these techniques involves trade-offs in throughput, spatial resolution, and sensitivity. To accurately identify and completely quantify microplastics and nanoplastics in environmental samples, multiple analytical techniques applied in tandem are likely to be required.
Asunto(s)
Nanoestructuras/química , Plásticos/análisis , Organismos Acuáticos/química , Organismos Acuáticos/metabolismo , Interacciones Hidrofóbicas e Hidrofílicas , Campos Magnéticos , Espectrometría de Masas , Microplásticos/análisis , Microplásticos/aislamiento & purificación , Microplásticos/metabolismo , Tamaño de la Partícula , Plásticos/aislamiento & purificación , Plásticos/metabolismo , Eliminación de Residuos Líquidos/métodos , Aguas Residuales/análisis , Contaminantes Químicos del Agua/análisis , Contaminantes Químicos del Agua/aislamiento & purificación , Contaminantes Químicos del Agua/metabolismoRESUMEN
The efficacy of plastic particle removal by municipal water treatment plants is currently uncertain, and the mechanisms involved in microplastic (MP) coagulation and flocculation have only been superficially investigated. The removal of pristine versus weathered plastic debris and the impact of plastic particle size on removal remain largely unexplored. In this study, coagulation, flocculation, and settling performances were investigated using pristine and weathered MPs (polyethylene (PE) and polystyrene (PS) microspheres, and polyester (PEST) fibers). Weathering processes that changed the surface chemistry and roughness of MPs impacted MP affinity for coagulants and flocculants. A quartz crystal microbalance with dissipation monitoring was used to identify the mechanisms involved during MP coagulation and flocculation. Measured deposition rates confirmed the relatively low affinity between plastic surfaces and aluminum-based coagulants compared to cationic polyacrylamide (PAM). In every case examined, coagulant efficiency increased when the plastic surface was weathered. Removals of 97 and 99% were measured for PEST and weathered PE, respectively. Larger pristine PE MPs were the most resistant to coagulation and flocculation, with 82% removal observed even under enhanced coagulation conditions. By understanding the interaction mechanisms, the removal of weathered MPs was optimized. Finally, this study explored the use of settled water turbidity as a possible indicator of MP removal.
Asunto(s)
Plásticos , Purificación del Agua , Floculación , Microplásticos , Eliminación de Residuos Líquidos , AguaRESUMEN
Nanoplastics (NPs; <0.1 µm) are speculated to be a bigger ecological threat due to their predicted wider distribution, higher concentrations, and bioavailability. Primary NPs are manufactured to be that size, while secondary NPs originate from fragmentation of bigger debris. To date, the long-term impact of NPs in freshwater systems, particularly secondary NPs, is not well-understood. Thus, we employed a freshwater invertebrate, Daphnia magna, to investigate the chronic effects of model primary NPs, fluorescent polystyrene nanospheres (PS-NPs; 20 nm), and water leachate of weathered single-use plastics that contained micro- and nanosized particles. In experiment 1, parent Daphnia (F0) were exposed to 1 and 50 mg/L PS-NPs until the production of the neonates (F1) followed by a two-generation recovery. PS-NPs were mainly detected in the intestine and brood chamber in F0 and transferred to F1 and F2. PS-NPs significantly decreased the appendage curling and heartbeat rate in F0 and reduced reproduction in F2. In experiment 2, the plastic leachate also reduced the appendage curling rate but increased growth and reproduction. The results suggest that the acute toxicity of primary and secondary plastic particles is low even at high concentrations, but their chronic and sublethal effects should not be overlooked.
Asunto(s)
Daphnia , Contaminantes Químicos del Agua , Animales , Agua Dulce , Humanos , Recién Nacido , Plásticos/toxicidad , Poliestirenos/toxicidad , Reproducción , Contaminantes Químicos del Agua/análisis , Contaminantes Químicos del Agua/toxicidadRESUMEN
Tuning surface composition and stiffness is now an established strategy to improve the integration of medical implants. Recent evidence suggests that matrix stiffness affects bacterial adhesion, but contradictory findings have been reported in the literature. Distinguishing between the effects of bacterial adhesion and attachment strength on these surfaces may help interpret these findings. Here, we develop a precision microfluidic shear assay to quantify bacterial adhesion strength on stiffness-tunable and biomolecule-coated silicone materials. We demonstrate that bacteria are more strongly attached to soft silicones, compared to stiff silicones; as determined by retention against increasing shear flows. Interestingly, this effect is reduced when the surface is coated with matrix biomolecules. These results demonstrate that bacteria do sense and respond to stiffness of the surrounding environment and that precisely defined assays are needed to understand the interplay among surface mechanics, composition, and bacterial binding.
Asunto(s)
Materiales Biocompatibles Revestidos/química , Escherichia coli K12/química , Técnicas Analíticas Microfluídicas , Siliconas/química , Adhesión Bacteriana , Materiales Biocompatibles Revestidos/síntesis química , Tamaño de la Partícula , Resistencia al Corte , Propiedades de SuperficieRESUMEN
The increasing presence of micro- and nano-sized plastics in the environment and food chain is of growing concern. Although mindful consumers are promoting the reduction of single-use plastics, some manufacturers are creating new plastic packaging to replace traditional paper uses, such as plastic teabags. The objective of this study was to determine whether plastic teabags could release microplastics and/or nanoplastics during a typical steeping process. We show that steeping a single plastic teabag at brewing temperature (95 °C) releases approximately 11.6 billion microplastics and 3.1 billion nanoplastics into a single cup of the beverage. The composition of the released particles is matched to the original teabags (nylon and polyethylene terephthalate) using Fourier-transform infrared spectroscopy (FTIR) and X-ray photoelectron spectroscopy (XPS). The levels of nylon and polyethylene terephthalate particles released from the teabag packaging are several orders of magnitude higher than plastic loads previously reported in other foods. An initial acute invertebrate toxicity assessment shows that exposure to only the particles released from the teabags caused dose-dependent behavioral and developmental effects.
Asunto(s)
Nanopartículas , Contaminantes Químicos del Agua , Monitoreo del Ambiente , Nylons , Plásticos , Espectroscopía Infrarroja por Transformada de Fourier , TéRESUMEN
Supported phospholipid bilayers (SPBs) are promising models for studying the passive penetration of lipid-soluble compounds into cells and cell membranes. A widely used tool to characterize molecular SPB interactions is the quartz crystal microbalance with dissipation monitoring (QCM-D). As QCM-D provides access to the mass density of supported membranes, it is well-suited to examine surface adsorption and membrane disruption phenomena. In the present study, we report on a novel approach to characterize SPB interactions with low molecular weight lipid-soluble substances. SPBs were formed on a silica-coated QCM-D crystal, exposed to various phenolic compounds (vanillin, gallic acid, and protocatechualdehyde), and subjected to linear temperature variation. While the exposure of the SPBs to the phenolic compounds did not result in detectable mass density changes, we observed noticeable alterations in their gel-fluid phase transitions. It was found that QCM-D can detect small variations in a SPB's main transition temperature (âª1 °C) and further resolve compound-specific lipid interactions. The acoustic sensing technique thus offers great potential for the use of supported membranes as stable and versatile model systems to study the transport of lipid-soluble substances into phospholipid bilayers and to assess their interactions therein.
Asunto(s)
Membrana Celular/química , Membrana Dobles de Lípidos/química , Fosfolípidos/química , Solubilidad , Temperatura de TransiciónRESUMEN
Plastic litter is widely acknowledged as a global environmental threat, and poor management and disposal lead to increasing levels in the environment. Of recent concern is the degradation of plastics from macro- to micro- and even to nanosized particles smaller than 100 nm in size. At the nanoscale, plastics are difficult to detect and can be transported in air, soil, and water compartments. While the impact of plastic debris on marine and fresh waters and organisms has been studied, the loads, transformations, transport, and fate of plastics in terrestrial and subsurface environments are largely overlooked. In this Critical Review, we first present estimated loads of plastics in different environmental compartments. We also provide a critical review of the current knowledge vis-à-vis nanoplastic (NP) and microplastic (MP) aggregation, deposition, and contaminant cotransport in the environment. Important factors that affect aggregation and deposition in natural subsurface environments are identified and critically analyzed. Factors affecting contaminant sorption onto plastic debris are discussed, and we show how polyethylene generally exhibits a greater sorption capacity than other plastic types. Finally, we highlight key knowledge gaps that need to be addressed to improve our ability to predict the risks associated with these ubiquitous contaminants in the environment by understanding their mobility, aggregation behavior and their potential to enhance the transport of other pollutants.
Asunto(s)
Plásticos , Contaminantes Químicos del Agua , Monitoreo del Ambiente , Agua Dulce , ResiduosRESUMEN
Groundwater contamination by pathogenic bacteria present in land-applied manure poses a threat to public health. In cold climate regions, surface soil layers experience repeated temperature fluctuations around the freezing point known as freeze-thaw (FT) cycles. With global climate change, annual soil FT cycles have increased, and this trend is expected to continue. It is therefore of interest to understand how FT cycles impact soil microbial communities. This study investigates the influence of FT cycles on the growth, culturability, biofilm formation, and virulence of the bacterial opportunistic pathogen Pseudomonas aeruginosa, a ubiquitous bacterium found in soil and water, responsible for infections in immunocompromised hosts. Our findings demonstrate that exposure to FT had no significant effect on growth or culturability of the bacteria. However, FT treatment significantly increased biofilm formation and delayed the onset of swimming motility, factors that are important for the pathogenicity of P. aeruginosa. An in vivo study using a chronic infection model revealed an increase in the virulence of P. aeruginosa after FT exposure. These results suggest that the impact of climate change on natural FT cycles may be affecting the ecology of soil-borne pathogens and host-pathogen interactions in unexpected ways.
Asunto(s)
Drosophila melanogaster , Pseudomonas aeruginosa , Animales , Congelación , Microbiología del Suelo , VirulenciaRESUMEN
Several types of engineered nanoparticles (ENPs) are being considered for direct application to soils to reduce the application and degradation of pesticides, provide micronutrients, control pathogens, and increase crop yields. This study examined the effects of different metal ENPs and their dissolved ions on the microbial community composition and enzyme activity of agricultural soil amended with biosolids. The activity of five extracellular nutrient-cycling enzymes was measured in biosolid-amended soils treated with different concentrations (1, 10, or 100 mg ENP/kg soil) of silver (nAg), zinc oxide (nZnO), copper oxide (nCuO), or titanium dioxide (nTiO2) nanoparticles and their ions over a 30-day period. At 30 days, nZnO and nCuO either had no significant effect on soil enzyme activity or enhanced enzyme activity. In contrast, Ag inhibited selected enzymes when dosed in particulate or dissolved form (at 100 mg/kg). nTiO2 either had no significant effect or slightly decreased enzyme activity. Illumina MiSeq sequencing of microbial communities indicated a shift in soil microbial community composition upon exposure to high doses of metal ions or nAg and negligible shift in the presence of nTiO2. Some taxa responded differently to nAg and Ag+. This work shows how metal ENPs can impact soil enzyme activity and microbial community composition upon introduction into soils amended with biosolids, depending on their type, concentration, and dissolution behavior, hence providing much needed information for the sustainable application of nanotechnology in agriculture.
Asunto(s)
Nanopartículas del Metal , Microbiota , Contaminantes del Suelo , Agricultura , Suelo , Microbiología del SueloRESUMEN
Perfluoroalkyl substances (PFAS) are ubiquitous and persistent environmental contaminants, yet knowledge of their biological effects and mechanisms of action is limited. The highest aqueous PFAS concentrations are found in areas where bacteria are relied upon for functions such as nutrient cycling and contaminant degradation, including fire-training areas, wastewater treatment plants, and landfill leachates. This research sought to elucidate one of the mechanisms of action of PFAS by studying their uptake by bacteria and partitioning into model phospholipid bilayer membranes. PFAS partitioned into bacteria as well as model membranes (phospholipid liposomes and bilayers). The extent of incorporation into model membranes and bacteria was positively correlated to the number of fluorinated carbons. Furthermore, incorporation was greater for perfluorinated sulfonates than for perfluorinated carboxylates. Changes in zeta potential were observed in liposomes but not bacteria, consistent with PFAS being incorporated into the phospholipid bilayer membrane. Complementary to these results, PFAS were also found to alter the gel-to-fluid phase transition temperature of phospholipid bilayers, demonstrating that PFAS affected lateral phospholipid interactions. This investigation compliments other studies showing that sulfonated PFAS and PFAS with more than seven fluorinated carbons have a higher potential to accumulate within biota than carboxylated and shorter-chain PFAS.
Asunto(s)
Fluorocarburos , Contaminantes Químicos del Agua , Bacterias , Biota , Membrana Dobles de LípidosRESUMEN
Total internal reflection fluorescence (TIRF) microscopy was used to investigate initial attachment and stability of wild-type, curli-deficient (ΔcsgA), flagella-deficient (ΔflhDC), and type-1 fimbriae-deficient (Δfim) mutant E. coli strains. Suspended bacteria were injected into a flow cell where they deposited on a silica coverslip, and images were acquired over a 2 min period. TIRF microscope image analysis revealed that curli- and flagella-deficient mutants attached closer to the surface and required a longer time to find their equilibrium position (i.e., bond maturation) as compared to the wild-type and fimbriae-deficient mutants. Analysis of the change in bacterial surface area over the 2 min period also indicated that curli- and flagella-deficient mutants have less initial stability than the wild-type and fimbriae-deficient mutants, evidenced by their fluctuating position at equilibrium. TIRF observations at the microscopic level were complemented macroscopically using quartz crystal microbalance with dissipation (QCM-D) and sand-packed column experiments, which support the distinctive behavior observed at the microscopic scale. For each mutant strain, as fluorescence intensity increased in TIRF, the negative frequency shift in QCM-D (related to the attached mass of bacteria) also increased. Packed-column experiments indicated that curli- and flagella-deficient mutants exhibited a characteristically different attachment behavior and more retention as compared to the wild-type and fimbriae-deficient strains. This study utilized a new approach to understand bacterial attachment/detachment and provides new insights into the role of various appendages on initial attachment and stability.
RESUMEN
Recent studies underline the potential health risks associated to the "nano" revolution, particularly for the workers who handle engineered nanoparticles (ENPs) that can be found in the formulation of several commercial products. Although many Health & Safety agencies recommend the use of protective gloves against chemicals, few studies have investigated the effectiveness of these gloves towards nanoparticle suspensions. Moreover, the data that are available are often contradictory. This study was designed to evaluate the effectiveness of protective gloves against nanoparticles in suspension. For this purpose, a new methodology was developed in order to take into account parameters encountered in the workplace such as mechanical deformations (MD) that simulate hand flexion and sweat. The effects of the precise experimental protocol on the concentrations of nanoparticles that were detected in the sampling suspension were assessed. Several samples of nitrile rubber gloves (73 µm thick), taken from different boxes, were brought into contact with gold nanoparticles (5 nm) in water. During their exposure to ENPs, the glove samples submitted systematic mechanical deformations and were placed in contact with a physiological solution simulating human sweat. Under these conditions, results obtained by inductively coupled plasma mass spectrometry (ICPMS) showed that the 5 nm gold nanoparticles passed through the protective gloves. This result was acquired, in spite of the observation of significant losses during the sampling phase that will be important for future experiments evaluating the effectiveness of these materials.
Asunto(s)
Guantes Protectores/normas , Ensayo de Materiales/métodos , Nanopartículas del Metal , Nitrilos , Falla de Equipo , Oro/química , Exposición Profesional/prevención & control , Permeabilidad , Sudor/químicaRESUMEN
Nanoscale zerovalent iron (NZVI) particles are often coated with polymeric surface modifiers for improved colloidal stability and transport during remediation of contaminated aquifers. Doping the NZVI surface with palladium (Pd-NZVI) increases its reactivity to pollutants such as trichloroethylene (TCE). In this study, we investigate the effects of coating Pd-NZVI with two surface modifiers of very different molecular size: rhamnolipid (RL, anionic biosurfactant, M.W. 600 g mol(-1)) and carboxymethylcellulose (CMC, anionic polyelectrolyte, M.W. 700â¯000 g mol(-1)) on TCE degradation. RL loadings of 13-133 mg TOC/g NZVI inhibited deposition of Pd in a concentration-dependent manner, thus limiting the number of available Pd sites and decreasing the TCE degradation reaction rate constant from 0.191 h(-1) to 0.027 h(-1). Furthermore, the presence of RL in solution had an additional inhibitory effect on the reactivity of Pd-NZVI by interacting with the exposed Pd deposits after they were formed. In contrast, CMC had no effect on reactivity at loadings up to 167 mg TOC/g NZVI. There was a lack of correlation between Pd-NZVI aggregate sizes and TCE reaction rates, and is explained by cryo-transmission electron microscopy images that show open, porous aggregate structures where TCE would be able to easily access Pd sites.
Asunto(s)
Carboximetilcelulosa de Sodio/química , Electrólitos/química , Glucolípidos/química , Nanopartículas del Metal/química , Tensoactivos/química , Tricloroetileno/química , Contaminantes Químicos del Agua/química , Hierro/química , Paladio/química , Eliminación de Residuos LíquidosRESUMEN
Proteus mirabilis is a major cause of catheter-associated urinary tract infection (CAUTI), emphasizing that novel strategies for targeting this bacterium are needed. Potential targets are P. mirabilis surface-associated swarming motility and the propensity of these bacteria to form biofilms that may lead to catheter blockage. We previously showed that the addition of cranberry powder (CP) to lysogeny broth (LB) medium resulted in impaired P. mirabilis swarming motility over short time periods (up to 16 h). Herein, we significantly expanded on those findings by exploring (i) the effects of cranberry derivatives on biofilm formation of P. mirabilis, (ii) whether swarming inhibition occurred transiently or over longer periods more relevant to real infections (â¼3 days), (iii) whether swarming was also blocked by commercially available cranberry juices, (iv) whether CP or cranberry juices exhibited effects under natural urine conditions, and (v) the effects of cranberry on medium pH, which is an indirect indicator of urease activity. At short time scales (24 h), CP and commercially available pure cranberry juice impaired swarming motility and repelled actively swarming bacteria in LB medium. Over longer time periods more representative of infections (â¼3 days), the capacity of the cranberry material to impair swarming diminished and bacteria would start to migrate across the surface, albeit by exhibiting a different motility phenotype to the regular "bull's-eye" swarming phenotype of P. mirabilis. This bacterium did not swarm on urine agar or LB agar supplemented with urea, suggesting that any potential application of anti-swarming compounds may be better suited to settings external to the urine environment. Anti-swarming effects were confounded by the ability of cranberry products to enhance biofilm formation in both LB and urine conditions. These findings provide key insights into the long-term strategy of targeting P. mirabilis CAUTIs.