RESUMEN
A new polymer acceptor poly{(N,N'-bis(2-ethylhexyl)-1,4,5,8-naphthalenedicarboximide-2,6-diyl)-alt-5,5-(3,3'-didodecyl-2,2'-bifuran)} (NDI-BFR) made from naphthalenediimide (NDI) and furan-derived head-to-head-linked 3,3'-dialkyl-2,2'-bifuran (BFR) units is reported in this study. Compared to the benchmark polymer poly(naphthalenediimide-alt-bithiophene) (N2200), NDI-BFR exhibits a larger bathochromic shift of absorption maxima (842 nm) with a much higher absorption coefficient (7.2 × 104 m-1 cm-1 ), leading to an ultranarrow optical bandgap of 1.26 eV. Such properties ensure good harvesting of solar light from visible to the near-infrared region in solar cells. Density functional theory calculation reveals that the polymer acceptor NDI-BFR possesses a higher degree of backbone planarity versus the polymer N2200. The polymer NDI-BFR exhibits a decent electron mobility of 0.45 cm2 V-1 s-1 in organic thin-film transistors (OTFTs), and NDI-BFR-based all-polymer solar cells (all-PSCs) achieve a power conversion efficiency (PCE) of 4.39% with a very small energy loss of 0.45 eV by using the environmentally friendly solvent 1,2,4-trimethylbenzene. These results demonstrate that incorporating head-to-head-linked BFR units in the polymer backbone can lead to increased planarity of the polymer backbone, reduced optical bandgap, and improved light absorbing. The study offers useful guidelines for constructing n-type polymers with narrow optical bandgaps.
Asunto(s)
Suministros de Energía Eléctrica , Furanos/química , Imidas/química , Naftalenos/química , Polímeros/química , Energía Solar , Teoría Funcional de la Densidad , Transistores ElectrónicosRESUMEN
Diketopyrrolopyrrole (DPP)-based copolymers have received considerable attention as promising semiconducting materials for high-performance organic thin-film transistors (OTFTs). However, these polymers typically exhibit p-type or ambipolar charge-transporting characteristics in OTFTs due to their high-lying highest occupied molecular orbital (HOMO) energy levels. In this work, a new series of DPP-based n-type polymers have been developed by incorporating fused bithiophene imide oligomers (BTIn) into DPP polymers. The resulting copolymers BTIn-DPP show narrow band gaps as low as 1.27 eV and gradually down-shifted frontier molecular orbital energy levels upon the increment of imide group number. Benefiting from the coplanar backbone conformation, well-delocalized π-system, and favorable polymer chain packing, the optimal polymer in the series shows promising n-type charge transport with an electron mobility up to 0.48 cm2 V-1 s-1 in OTFTs, which is among the highest values for the DPP-based n-type polymers reported to date. The results demonstrate that incorporating fused bithiophene imide oligomers into polymers can serve as a promising strategy for constructing high-performance n-type polymeric semiconductors.
Asunto(s)
Imidas/química , Cetonas/química , Polímeros/síntesis química , Pirroles/química , Tiofenos/química , Teoría Funcional de la Densidad , Estructura Molecular , Polímeros/química , Semiconductores , Transistores ElectrónicosRESUMEN
Development of high-performance unipolar n-type organic semiconductors still remains as a great challenge. In this work, all-acceptor bithiophene imide-based ladder-type small molecules BTI n and semiladder-type homopolymers PBTI n ( n = 1-5) were synthesized, and their structure-property correlations were studied in depth. It was found that Pd-catalyzed Stille coupling is superior to Ni-mediated Yamamoto coupling to produce polymers with higher molecular weight and improved polymer quality, thus leading to greatly increased electron mobility (µe). Due to their all-acceptor backbone, these polymers all exhibit unipolar n-type transport in organic thin-film transistors, accompanied by low off-currents (10-10-10-9 A), large on/off current ratios (106), and small threshold voltages (â¼15-25 V). The highest µe, up to 3.71 cm2 V-1 s-1, is attained from PBTI1 with the shortest monomer unit. As the monomer size is extended, the µe drops by 2 orders to 0.014 cm2 V-1 s-1 for PBTI5. This monotonic decrease of µe was also observed in their homologous BTI n small molecules. This trend of mobility decrease is in good agreement with the evolvement of disordered phases within the film, as revealed by Raman spectroscopy and X-ray diffraction measurements. The extension of the ladder-type building blocks appears to have a large impact on the motion freedom of the building blocks and the polymer chains during film formation, thus negatively affecting film morphology and charge carrier mobility. The result indicates that synthesizing building blocks with more extended ladder-type backbone does not necessarily lead to improved mobilities. This study marks a significant advance in the performance of all-acceptor-type polymers as unipolar electron transporting materials and provides useful guidelines for further development of (semi)ladder-type molecular and polymeric semiconductors for applications in organic electronics.
RESUMEN
Two new bithiophene imide (BTI)-based n-type polymers were synthesized. f-BTI2-FT based on a fused BTI dimer showed a smaller band gap, a lower LUMO, and higher crystallinity than s-BTI2-FT containing a BTI dimer connected through a single bond. s-BTI2-FT exhibited a remarkable electron mobility of 0.82â cm2 V-1 s-1 , and f-BTI2-FT showed a further improved mobility of 1.13â cm2 V-1 s-1 in transistors. When blended with the polymer donor PTB7-Th, f-BTI2-FT-based all-polymer solar cells (all-PSCs) attained a PCE of 6.85 %, the highest value for an all-PSC not based on naphthalene (or perylene) diimide polymer acceptors. However, s-BTI2-FT all-PSCs showed nearly no photovoltaic effect. The results demonstrate that f-BTI2-FT is one of most promising n-type polymers and that ring fusion offers an effective approach for designing polymers with improved electrical properties.
RESUMEN
The molecular weight of a conjugated polymer is one of the key factors determining the electrical, morphological, and mechanical properties as well as its solubility in organic solvents and miscibility with other polymers. In this study, a series of semicrystalline poly[(2,5-bis(2-hexyldecyloxy)phenylene)-alt-(5,6-difluoro-4,7-di(thiophen-2-yl)benzo[c][1,2,5]thiadiazole)] (PPDT2FBT) polymers with different number-average molecular weights (M(n)'s) (PPDT2FBT(L), M(n) = 12 kg/mol; PPDT2FBT(M), M(n) = 24 kg/mol; PPDT2FBT(H), M(n) = 40 kg/mol) were synthesized, and their photovoltaic properties as electron donors for all-polymer solar cells (all-PSCs) with poly[[N,N'-bis(2-octyldodecyl)-napthalene-1,4,5,8-bis(dicarboximide)-2,6-diyl]-alt-5,5'-(2,2'-bithiophene)] (P(NDI2OD-T2)) acceptor were studied. The M(n) effect of PPDT2FBT on the structural, morphological, electrical, and photovoltaic properties was systematically investigated. In particular, tuning the M(n) induced dramatic effects on the aggregation behaviors of the polymers and their bulk heterojunction morphology of all-PSCs, which was thoroughly examined by grazing incident X-ray scattering, resonant soft X-ray scattering, and other microscopy measurements. High M(n) PPDT2FBT(H) promoted a strong "face-on" geometry in the blend film, suppressed the formation of an excessively large crystalline domain, and facilitated molecularly intermixed phases with P(NDI2OD-T2). Therefore, the optimized all-PSCs based on PPDT2FBT(H)/P(NDI2OD-T2) showed substantially higher hole and electron mobilities than those of PPDT2FBT(L)/P(NDI2OD-T2), leading to a power conversion efficiency exceeding 5%, which is one of the highest values for all-PSCs reported thus far.
RESUMEN
We study the in-plane/out-of-plane anisotropies in refractive indices (n) and in thermo-optic coefficients (dn/dT) of benzocyclobutene (BCB) thin film on a substrate. Both nonoxidized and oxidized films are investigated. Aside from the stress-induced effects, oxidation has significant influence on the refractive index anisotropy. The dependence of the anisotropy on each of the thermal stress and the oxidation is determined quantitatively. The anisotropies in the dn/dT values are mainly caused by the thermal stress and are independent of oxidation. However, the original (stress-free) thermo-optic coefficients are obtained as isotropic and significantly different than the measured dn/dT values. Our findings have the potential to optimize the design of polarization insensitive and/or athermal BCB optical waveguide devices.
RESUMEN
We present a simple method for simultaneous measurement of thermo-optic and stress-optic coefficients of polymer thin films by measuring the film refractive indices as a function of temperature (dn/dT). Usually, such dn/dT value is considered as the thermo-optic coefficient. However, in the thin film systems, the measured dn/dT values result from both the thermo-optic and stress-optic effects. To demonstrate the stress-induced effects, the dn/dT values have been investigated for two different polymers: benzocyclobutene (high film stress) and epoxy 3505 (negligible film stress), using a prism coupler technique. The finite element method has been used so as to predict the stresses in the polymer film and, by combining them with the experimental dn/dT values, the individual thermo-optic and stress-optic coefficients have been determined. We found that the obtained thermo-optic coefficient is significantly different than the measured dn/dT values. The method is generic in nature and can thus be applied to a wide range of polymer waveguide materials.
RESUMEN
Photostability of small-molecule (SM)-based organic photovoltaics (SM-OPVs) is greatly improved by utilizing a ternary photo-active layer incorporating a small amount of a conjugated polymer (CP). Semi-crystalline poly[(2,5-bis(2-hexyldecyloxy)phenylene)-alt-(5,6-difluoro-4,7-di(thiophen-2-yl)benzo[c][1,2,5]thiadiazole)] (PPDT2FBT) and amorphous poly[(2,5-bis(2-decyltetradecyloxy)phenylene)-alt-(5,6-dicyano-4,7-di(thiophen-2-yl)benzo[c][1,2,5]thiadiazole)] (PPDT2CNBT) with similar chemical structures were used for preparing SM:fullerene:CP ternary photo-active layers. The power conversion efficiency (PCE) of the ternary device with PPDT2FBT (Ternary-F) was higher than those of the ternary device with PPDT2CNBT (Ternary-CN) and a binary SM-OPV device (Binary) by 15% and 17%, respectively. The photostability of the SM-OPV was considerably improved by the addition of the crystalline CP, PPDT2FBT. Ternary-F retained 76% of its initial PCE after 1500 h of light soaking, whereas Ternary-CN and Binary retained only 38% and 17% of their initial PCEs, respectively. The electrical and morphological analyses of the SM-OPV devices revealed that the addition of the semi-crystalline CP led to the formation of percolation pathways for charge transport without disturbing the optimized bulk heterojunction morphology. The CP also suppressed trap-assisted recombination and enhanced the hole mobility in Ternary-F. The percolation pathways enabled the hole mobility of Ternary-F to remain constant during the light-soaking test. The photostability of Ternary-CN did not improve because the addition of the amorphous CP inhibited the formation of ordered SM domains.
RESUMEN
Polythiophenes, built on the electron-rich thiophene unit, typically possess high-lying energy levels of the lowest unoccupied molecular orbitals (LUMOs) and show hole-transporting properties. In this study, we develop a series of n-type polythiophenes, P1-P3, based on head-to-head-linked 3,3'-dialkoxy-4,4'-dicyano-2,2'-bithiophene (BTCNOR) with distinct side chains. The BTCNOR unit shows not only highly planar backbone conformation enabled by the intramolecular noncovalent sulfur-oxygen interaction but also significantly suppressed LUMO level attributed to the cyano-substitution. Hence, all BTCNOR-based polymer semiconductors exhibit low-lying LUMO levels, which are â¼1.0 eV lower than that of regioregular poly(3-hexylthiophene) (rr-P3HT), a benchmark p-type polymer semiconductor. Consequently, all of the three polymers can enable unipolar n-type transport characteristics in organic thin-film transistors (OTFTs) with low off-currents ( Ioffs) of 10-10-10-11 A and large current on/off ratios ( Ion/ Ioffs) at the level of 106. Among them, polymer P2 with a 2-ethylhexyl side chain offers the highest film ordering, leading to the best device performance with an excellent electron mobility (µe) of 0.31 cm2 V-1 s-1 in off-center spin-cast OTFTs. To the best of our knowledge, this is the first report of n-type polythiophenes with electron mobility comparable to the hole mobility of the benchmark p-type rr-P3HT and approaching the electron mobility of the most-studied n-type polymer, poly(naphthalene diimide- alt-bithiophene) (i.e., N2200). The change of charge carrier polarity from p-type (rr-P3HT) to n-type (P2) with comparable mobility demonstrates the obvious effectiveness of our structural modification. Adoption of n-hexadecyl (P1) and 2-butyloctyl (P3) side chains leads to reduced film ordering and results in 1-2 orders of magnitude lower µes, showing the critical role of side chains in optimizing device performance. This study demonstrates the unique structural features of head-to-head linkage containing BTCNOR for constructing high-performance n-type polymers, i.e., the alkoxy chain for backbone conformation locking and providing polymer solubility as well as the strong electron-withdrawing cyano group for lowering LUMO levels and enabling n-type performance. The design strategy of BTCNOR-based polymers provides useful guidelines for developing n-type polythiophenes.
RESUMEN
Ternary organic solar cells are promising alternatives to the binary counterpart due to their potential in achieving high performance. Although a growing number of ternary organic solar cells are recently reported, less effort is devoted to morphology control. Here, ternary organic solar cells are fabricated using a wide-bandgap polymer PBT1-C as the donor, a crystalline fused-ring electron acceptor ITIC-2Cl, and an amorphous fullerene derivative indene-C60 bisadduct (ICBA) as the acceptor. It is found that ICBA can disturb π-π interactions of the crystalline ITIC-2Cl molecules in ternary blends and then help to form more uniform morphology. As a result, incorporation of 20% ICBA in the PBT1-C:ITIC-2Cl blend enables efficient charge dissociation, negligible bimolecular recombination, and balanced charge carrier mobilities. An impressive power conversion efficiency (PCE) of 13.4%, with a high fill factor (FF) of 76.8%, is eventually achieved, which represents one of the highest PCEs reported so far for organic solar cells. The results manifest that the adoption of amorphous fullerene acceptor is an effective approach to optimizing the ternary blend morphology and thereby increases the solar cell performance.
RESUMEN
We present here a series of wide-band-gap ( Eg: >1.8 eV) polymer donors by incorporating thiophene-flanked phenylene as an electron-donating unit and quinoxaline as an electron-accepting co-unit to attain large open-circuit voltages ( Vocs) and short-circuit currents ( Jscs) in nonfullerene organic solar cells (OSCs). Fluorination was utilized to fine-tailor the energetics of polymer frontier molecular orbitals (FMOs) by replacing a variable number of H atoms on the phenylene moiety with F. It was found that fluorination can effectively modulate the polymer backbone planarity through intramolecular noncovalent S···F and/or H···F interactions. Polymers (P2-P4) show an improved molecular packing with a favorable face-on orientation compared to their nonfluorinated analogue (P1), which is critical to charge carrier transport and collection. When mixed with IDIC, a nonfullerene acceptor, P3 with two F atoms, achieves a remarkable Voc of 1.00 V and a large Jsc of 15.99 mA/cm2, simultaneously, yielding a power-conversion efficiency (PCE) of 9.7%. Notably, the 1.00 V Voc is among the largest values in the IDIC-based OSCs, leading to a small energy loss ( Eloss: 0.62 eV) while maintaining a large PCE. The P3:IDIC blend shows an efficient exciton dissociation through hole transfer even under a small energy offset of 0.16 eV. Further fluorination leads to the polymer P4 with increased chain-twisting and mismatched FMO levels with IDIC, showing the lowest PCE of 2.93%. The results demonstrate that quinoxaline-based copolymers are promising donors for efficient OSCs and the fluorination needs to be fine-adjusted to optimize the interchain packing and physicochemical properties of polymers. Additionally, the structure-property correlations from this work provide useful insights for developing wide-band-gap polymers with low-lying highest occupied molecular orbitals to minimize Eloss and maximize Voc in nonfullerene OSCs for efficient power conversion.
RESUMEN
This study shows that the backbone conformation of head-to-head type 3,3'-dialkyl-2,2'-bithiophene can be tuned via fluorination of the neighboring benzothiadiazole (BTz). Without fluorination, the polymer backbone is highly twisted, whereas difluorination of BTz produced a coplanar backbone. Monofluorination of BTz yielded a tunable polymer backbone conformation depending on the film annealing temperature. In organic thin-film transistors, the polymer with the head-to-head linkages showed a remarkable hole mobility of >0.5 cm2 V-1 s-1 upon attaining a planar backbone. Thus, the head-to-head linkage does not necessarily lead to backbone nonplanarity, and achieving planar conformation of 3,3'-dialkyl-2,2'-bithiophene has profound implications in materials design for organic semiconducting devices, yielding good solubility, reduced materials synthetic steps, and improved opto-electrical properties.
RESUMEN
A face-on oriented and p-doped semicrystalline conjugated polymer, poly[(2,5-bis(2-hexyldecyloxy)phenylene)-alt-(5,6-difluoro-4,7-di(thiophen-2-yl)benzo[c][1,2,5]-thiadiazole)] (PPDT2FBT), was studied as a hole-transport layer (HTL) in methylammonium lead triiodide-based perovskite solar cells (PVSCs). PPDT2FBT exhibits a mid-band gap (1.7 eV), high vertical hole mobility (7.3 × 10-3 cm2/V·s), and well-aligned frontier energy levels with a perovskite layer for efficient charge transfer/transport, showing a maximum power conversion efficiency (PCE) of 16.8%. Upon doping the PPDT2FBT HTL with a nonhygroscopic Lewis acid, tris(pentafluorophenyl)borane (BCF, 2-6 wt %), the vertical conductivity was improved by a factor of approximately 2, and the resulting PCE was further improved up to 17.7%, which is higher than that of standard PVSCs with 2,2',7,7'-tetrakis(N,N-di-p-methoxyphenylamine)-9,9'-spirobifluorene (spiro-OMeTAD) as an HTL. After BCF doping, the clearly enhanced carrier diffusion coefficient, diffusion length, and lifetime were measured using intensity-modulated photocurrent and photovoltage spectroscopy. Furthermore, compared to the standard PVSCs with spiro-OMeTAD, the temporal device stability was remarkably improved, preserving the â¼60% of the original PCE for 500 h without encapsulation under light-soaking condition (1 sun AM 1.5G) at 85 °C and 85% humidity, which is mainly due to the highly crystalline conjugated backbone of PPDT2FBT and nonhygroscopic nature of BCF. In addition, formamidinium lead iodide/bromide (FAPbI3-xBrx)-based PVSCs with the BCF-doped PPDT2FBT as an HTL was also prepared to show 18.8% PCE, suggesting a wide applicability of PPDT2FBT HTL for different types of PVSCs.
RESUMEN
A series of polymer semiconductors incorporating 2,1,3-benzothiadiazole-5,6-dicarboxylicimide (BTZI) as strong electron-withdrawing unit and an alkoxy-functionalized head-to-head linkage containing bithiophene or bithiazole as highly electron-rich co-unit are designed and synthesized. Because of the strong intramolecular charge transfer characteristics, all three polymers BTZI-TRTOR (P1), BTZI-BTOR (P2), and BTZI-BTzOR (P3) exhibit narrow bandgaps of 1.13, 1.05, and 0.92 eV, respectively, resulting in a very broad absorption ranging from 350 to 1400 nm. The highly electron-deficient 2,1,3-benzothiadiazole-5,6-dicarboxylicimide and alkoxy-functionalized bithiophene (or thiazole) lead to polymers with low-lying lowest unoccupied molecular orbitals (-3.96 to -4.28 eV) and high-lying highest occupied molecular orbitals (-5.01 to -5.20 eV). Hence, P1 and P3 show substantial and balanced ambipolar transport with electron mobilities/hole mobilities of up to 0.86/0.51 and 0.95/0.50 cm2 V-1 s-1, respectively, and polymer P2 containing the strongest donor unit exhibited unipolar p-type performance with an average hole mobility of 0.40 cm2 V-1 s-1 in top-gate/bottom-contact thin-film transistors with gold as the source and drain electrodes. When incorporated into bulk heterojunction polymer solar cells, the narrow bandgap (1.13 eV) polymer P1 shows an encouraging power conversion efficiency of 4.15% with a relatively large open-circuit voltage of 0.69 V, which corresponds to a remarkably small energy loss of 0.44 eV. The power conversion efficiency of P1 is among the highest reported to date with such a small energy loss in polymer:fullerene solar cells.
RESUMEN
New small molecules having modified acceptor strength and π-conjugation length and containing dicyanovinylene (DCV) and tricyanovinylene (TCV) as a strongly electron-accepting unit with indacenodithiophene, IDT(DCV)2, IDT(TCV)2, and IDTT(TCV)2, were synthesized and studied in terms of their applicability to polymer solar cells with PTB7-Th as an electron-donating polymer. Intriguingly, the blended films containing IDT(TCV)2 and IDTT(TCV)2 exhibited superior shelf life stabilities of more than 1000 h without any reduction in the initial power conversion efficiency. The low-lying lowest unoccupied molecular orbital energy levels and robust internal morphologies of small TCV-containing molecules could afford excellent shelf life stability.
RESUMEN
A well-organized donor-acceptor crystalline structure is examined for high -performance nonfullerene solar cells. By thermal annealing, nanoscale structures of both donor and acceptor domains are successfully modulated, followed by -significant changes in the resulting -photovoltaic characteristics. When annealed at 90 °C, a maximum power conversion efficiency of 7.64% with a -remarkable open-circuit voltage of 1.03 V is obtained.
RESUMEN
New M- and V-shaped perylene diimide (PDI)-based small molecules using a non-conjugated 1,1-diphenylcyclohexane linker (CP-M and CP-V, respectively) were designed and synthesized as new n-type acceptors for nonfullerene-based polymer solar cells. The blended film with poly[(2,5-bis(2-hexyldecyloxy)phenylene)-alt-(5,6-difluoro-4,7-di(thiophen-2-yl)benzo[c][1,2,5]thiadiazole)] (PPDT2FBT) and CP-V displayed a higher power conversion efficiency of 5.28% due to higher short circuit current and fill factor values.
RESUMEN
A highly efficient fullerene-free polymer solar cell (PSC) based on PDCBT, a polythiophene derivative substituted with alkoxycarbonyl, achieves an impressive power conversion efficiency of 10.16%, which is the best result in PSCs based on polythiophene derivatives to date. In comparison with a poly(3-hexylthiophene):ITIC-based device, the photovoltaic and morphological properties of the PDCBT:ITIC-based device are carefully investigated and interpreted.
RESUMEN
When aqueous conjugated-polyelectrolyte colloidal solutions containing an adequate amount of surfactant with an appropriate hydrophile-lipophile balance were sprayed onto latent fingerprints (LFPs), the polymer nanoparticles were readily transferred to the LFPs to reveal highly distinguishable fluorescent images, while the LFPs themselves remained intact.