Electromyographic analysis of selected shoulder muscles during shoulder rehabilitation exercises in patients after reverse total shoulder arthroplasty.

BACKGROUND: Reverse shoulder arthroplasty (RSA) aims to restore function in patients with rotator cuff failure and joint arthropathy. After surgery, patients are routinely referred to a rehabilitation specialist to regain range of motion, strength, and function. A key element in these programs is active exercises. The exercises are often selected based on assumed muscle activity, investigated by electromyography (EMG). In particular, in this patient population, activation of the deltoid and the scapular muscles is the focus of exercise therapy. Currently, most studies investigating muscle activity levels during exercises are performed on healthy individuals. To our knowledge, no study exists analyzing EMG activity during exercises in a population of shoulder arthroplasty patients. Therefore, the study aimed to analyze activity in the shoulder girdle muscles during 6 commonly used rehabilitation exercises 12 weeks after reverse shoulder arthroplasty surgery. METHODS: Forty-four patients (50 shoulders) participated in this cross-sectional study, 12 weeks postoperatively (mean 99.18 ± 12.8 days), aged 68.9 ± 7.75 years. Surface EMG activity was measured in 10 shoulder girdle muscles: the 3 trapezius parts, serratus anterior, the 3 deltoid parts, latissimus dorsi, and 2 pectoralis major parts during 6 exercises, 3 in a closed chain, and 3 open chain elevation exercises. RESULTS: Gravity-minimized exercises (horizontal plane) show low activity for almost all muscles. Vertical closed kinetic chain exercises show an increased activity compared to horizontal plane exercises. Open kinetic chain exercises against gravity showed the greatest activity in deltoid and upper trapezius. For the other muscles, no consistency in progression was found. CONCLUSION: This study offers a progression of exercises for patients after reverse shoulder arthroplasty based on increased muscle activity.

Scapular morphology of great apes and humans: A three-dimensional computed tomography-based comparative study.

The primate scapula has been studied widely since its shape has been shown to correlate with how the forelimb is used in daily activities. In this study, we expand on the existing literature and use an image-based methodology that was originally developed for orthopaedic practice to quantify and compare the three-dimensional (3D) morphology of the scapula across humans and great apes. We expect that this image-based approach will allow us to identify differences between great apes and humans that can be related to differences in mobility and loading regime of the shoulder. We hypothesize that gorillas and chimpanzees will have a similar scapular morphology, geared towards stability and weight-bearing in knuckle-walking, whilst the scapular morphology of orangutans is expected to be more similar to that of humans given their high glenohumeral mobility associated with their suspensory lifestyle. We made 3D reconstructions of computed tomography scans of 69 scapulae from four hominid genera (Pongo, Gorilla, Pan and Homo). On these 3D bone meshes, the inferior glenoid plane was determined, and subsequently, a set of bony landmarks on the scapular body, coracoid, and acromion were defined. These landmarks allowed us to measure a set of functionally relevant angles which represent acromial overhang, subacromial space and coracoacromial space. The angles that were measured are: the delto-fulcral triangle (DFT), comprising the alpha, beta, and delta angle, the acromion-glenoid angle (AGA), the coracoid-glenoid centre-posterior acromial angle (CGA), the anterior tilt (TA CGA) and the posterior tilt of the CGA (PT CGA). Three observers placed the landmarks on the 3D bone meshes, allowing us to calculate the inter-observer error. The main differences in the DFT were found between humans and the great apes, with small differences between the great apes. The DFT of humans was significantly lower compared to that of the great apes, with the smallest alpha (32.7°), smallest delta (45.7°) and highest beta angle (101.6°) of all genera. The DFT of chimpanzees was significantly higher compared to that of humans (p < 0.01), with a larger alpha (37.6°) and delta angle (54.5°) and smaller beta angle (87.9°). The mean AGA of humans (59.1°) was significantly smaller (p < 0.001) than that of gorillas (68.8°). The mean CGA of humans (110.1°) was significantly higher (p < 0.001) than in orangutans (92.9°). Humans and gorillas showed mainly a posterior tilt of their coracoacromial complex whilst chimpanzees showed mainly an anterior tilt. The coracoacromial complex of the orangutans was not tilted anteriorly or posteriorly. With our image-based method, we were able to identify morphological features of the scapula that differed significantly between hominid genera. However, we did not find an overall dichotomy in scapular morphology geared towards high stability (Pan/Gorilla) or high mobility (Homo/Pongo). Further research is needed to investigate the functional implications of these differences in scapular morphology.

Biomechanical Evaluation of a Tubular Braided Construct for Primary Deep Flexor Tendon Surgery.

PURPOSE: Immediate postoperative mobilization has been shown to avoid adhesion formation and improve range of motion after flexor tendon repair. A tubular braided construct was designed to allow for these rehabilitation protocols. METHODS: In this ex vivo study, 92 ovine flexor tendons were divided randomly into 2 equal groups. After creating a transection, the tendons of the first group were repaired using a tubular braided construct. This construct, consisting of a tubular braid of polypropylene and polyethylene terephthalate fibers, exerts a grasping effect on the tendon ends. The control group received a multistrand modified Kessler repair with a looped polydioxanone suture (PDS) 4-0 suture and a Silfverskiöld epitendinous repair using an Ethilon 6-0 suture. After the repair, a static and an incremental cyclic tensile test was performed until failure. RESULTS: During the static test, the tubular braid resulted in a significantly higher load at 3 mm gap formation (86.3 N ± 6.0 vs 50.1 N ± 11.6), a higher ultimate load at failure (98.3 N ± 12.7 vs 63 N ± 11.1), higher stress at ultimate load (11.8 MPa ± 1.2 vs 8.1 MPa ± 3.1), and higher stiffness (7.1 N/mm ± 2.9 vs 8.7 N/mm ± 2.2). For the cyclic tests, survival analyses for 1-, 2- and 3-mm gap formation and failure demonstrated significant differences in favor of the tubular braided construct. CONCLUSION: The tubular braided construct withstands the required loads for immediate rehabilitation not only in static tests, but also during cyclic tests. This is in contrast with the control group, where sufficient strength is reached during static tests, but failures occur below the required loads during cyclic testing. CLINICAL RELEVANCE: The tubular braided construct provides a larger safety margin for immediate intensive rehabilitation protocols.

Demographic heterogeneity in valgus angulation of the proximal ulnar canal in relation to the flexion-extension axis.

BACKGROUND: The long-term outcome of total elbow arthroplasty remains unsatisfactory because of loosening and polyethylene wear, which could be caused by malpositioning of the ulnar component. When introducing an ulnar component, 2 different angles should be considered in the coronal plane: the valgus angulation of the proximal ulna in relation to the flexion-extension axis (FE-axis) and the intramedullary varus angulation in relation to the FE-axis. Currently, available TEA designs may not always be able to reconstruct the FE-axis because of the morphologic variability of the ulna. HYPOTHESIS: This study aimed to determine the demographic variability of the ulna and the relation between the 2 angulations in the frontal plane based on 3-dimentional computed tomography (CT) reconstructions of the elbow joint of healthy volunteers. METHODS: Computed tomography scans of 36 left elbows of healthy volunteers were obtained (20 men and 16 women). The scans were segmented and analyzed using the Mimics Research 20.0 software. A local coordinate system was created based on the FE-axis of the elbow and the ulna's longitudinal axis. The measurements were conducted using the 3-Matic Research 12.0 software. RESULTS: The valgus angulation of the proximal medullary canal was on average 16° in men but 12° in women and ranged between 5° and 21°. The varus angulation of the medullary cavity could be determined at 57 mm in men and 64 mm in women from the FE-axis. This angulation was on average 10° in men and 7° in women. There was no significant correlation between this angle and the length of the ulna or the point of varus angulation. CONCLUSION: This study found a wide range of valgus angulation of the proximal ulnar canal in relation to the FE-axis. The available elbow implant designs are discordant with the mean valgus angulation of the proximal ulna found in this study, and the valgus laxity of the implants does not cover the variability in the population.

Hyaluronic acid as an alternative treatment option for degenerative rotator cuff tears.

Rotator cuff tears have a high prevalence in older people. This research examines the clinical outcome of the non-operative treatment of symptomatic degenerative rotator cuff tears with hyaluronic acid (HA) injections. 72 patients (43 females/29 males), with an average age of 66 years with symptomatic degenerative full- thickness rotator cuff tear, confirmed with arthro-CT, were treated with three intra-articular hyaluronic acid injections and followed on multiple observational moments during a 5-year follow-up using the SF- 36 (Short-Form Health Survey), DASH (Disabilities of the Arm, Shoulder, and Hand), CMS (Constant Murley Score), and OSS (Oxford Shoulder Scale. 54 patients completed the 5-year follow-up questionnaire. 77% of the patients did not require additional treatment for their shoulder pathology, and 89% were treated conservatively. Only 11% of the patients included in this study needed surgery. Between subjects, the analysis revealed a significant difference in response in the DASH (p=0.015) and CMS (p=0.033) when the subscapularis muscle was involved. Intra-articular infiltrations with hyaluronic acid improve pain and shoulder function, especially if the subscapularis muscle is not involved.

Radial head fractures: a quantitative analysis.

Several classification systems for radial head fractures discuss the number of fragments and their displacement, but not the exact location. This study aimed to evaluate the location of the radial head fracture fragments and the influence of the Mason type on the size of the fracture fragment. Forty-one radial head fractures (31 Mason type I and 10 type II) with an elliptical radial head were included in this retrospective study and 3D reconstructed. First, the fragments were repositioned to their original location. Next, the orientation of the scanned forearm was evaluated using the position of the longest axis relative to the proximal radio-ulnar joint, and all radial heads were rotated to the neutral rotation. The radial head was divided into 4 quadrants (anteromedial, anterolateral, posteromedial, and posterolateral). The location of the fracture line in correlation with these 4 quadrants was evaluated. All fracture fragments were located in the anteromedial quadrant. Thirty-eight (93%) were located in the anterolateral quadrant. The posterolateral quadrant was involved in 32%. At last, the average fracture fragment size was evaluated according to the Mason classification. A significant difference was found in the average fracture fragment size between Mason type I (38% of the radial head surface) and type II (48% of the radial head surface). It was concluded that there is an important involvement of the anterior quadrants of the fracture. The mean size of the fracture is significantly larger in Mason type II compared to type I.

Is bone grafting always necessary in revision reverse total shoulder arthroplasty with uncontained glenoid bone defects?

BACKGROUND: Patients with an uncontained glenoid bone defect can still successfully undergo a reverse total shoulder arthroplasty (RTSA). Currently, there is a tendency toward reconstruction of the premorbid glenoid plane with bone grafts, which is technically demanding. We investigated whether central peg positioning in the spine pillar (CPPSP) is a more feasible alternative to the use of bone grafts. METHODS: This study included 60 revisions to an RTSA with uncontained glenoid bone defects. Patients were treated with bone grafts in 29 cases and with the CPPSP technique in 31 cases. We assessed clinical results using the Constant score and assessed the complication rate. RESULTS: The Constant score changed from 42 to 69 points in the CPPSP group and from 47 to 60 points in the bone graft group. This difference in the increase in the Constant score was significant (P = .031) owing to a significant difference in strength in favor of the CPPSP group. The overall complication rate was 37.7% (20 of 53 patients), with a reoperation rate of 18.9% (10 of 53). Dislocations occurred only in the CPPSP group (n = 3), and loosening of the glenoid occurred only in the bone graft group (n = 3). CONCLUSION: Patients with uncontained glenoid bone defects undergoing revision to an RTSA obtain similar clinical results with the CPPSP technique compared with the use of bone grafts. The CPPSP technique is a valid alternative but results in different complications.

Three-dimensional evaluation of scapular morphology in primary glenohumeral arthritis, rotator cuff arthropathy, and asymptomatic shoulders.

BACKGROUND: Recently, the 3-dimensional (3D) morphology of the coracoacromial complex in nonpathologic shoulders has been described. The aim of this study was to evaluate and compare the coracoacromial complex in pathologic shoulders (glenohumeral osteoarthritis [GHOA] and cuff tear arthropathy [CTA]) and nonpathologic shoulders. METHODS: A 3D computed tomography reconstruction of 205 scapulae was performed (49 with GHOA, 48 with CTA, and 108 in normal shoulders [NL]). Subsequently, the center of the glenoid circle and several points at the coracoid, acromion, and glenoid were determined. The distances between these points and the rotation of the coracoacromial complex were calculated, and the acromion-glenoid angle was measured. RESULTS: The acromial overhang was significantly different between the NL (37 mm) and CTA (35 mm) groups (P = .045), as well as between the CTA and GHOA groups (33 mm) (P = .010). The acromion-glenoid angle showed a significant difference between the NL (mean, 50°) and GHOA (mean, 42°) groups (P < .001) and between the CTA (mean, 50°) and GHOA groups (P < .001). Furthermore, a significant difference was found in the acromial height, which was larger in the GHOA group (36 mm) than in the CTA group (30 mm) (P < .001) or NL group (30 mm) (P < .001). CONCLUSION: This 3D morphologic study showed that the acromial part of the complex was turned more posteriorly in both pathologic groups. Furthermore, we found the coracoacromial complex to be more cranial to the glenoid center in the GHOA group. Finally, a significant difference in the lateral overhang of the coracoacromial complex was observed between the 3 groups. The NL group had a larger overhang than the CTA group, and the CTA group in turn had a larger overhang than the GHOA group.

Fracture patterns in midshaft clavicle fractures.

Current classifications of midshaft clavicle fractures are based on radiography. The aim of the study was to evaluate the fracture pattern of clavicle fractures using 3-dimensional computed tomography (3D CT). A retrospective analysis was performed on CT scans of 65 acute clavicle fractures. Using quantitative 3D CT reconstruction techniques, the fracture of the clavicle was virtually reduced. Based on these reconstructions, a group-based fracture heat map and small fragment heat map, and the location of the most common fracture line were determined. Also, the direction and amount of displacement were evaluated. Three fracture patterns could be distinguished. The primary fracture line in type 1 is going from posteromedial to anterolateral and located between 50% and 68% of the clavicle's length. In type 2, a transverse fracture line is located around 55%, and in type 3, a superolateral to inferomedial line is located between 47% and 56%. Wedged fracture fragments can be seen in types 1 and 2 and are mainly situated inferiorly. The displacement is similar in all types, but the main direction of displacement is specific for the different types (posterior, anterior, inferior). We can conclude that several fracture patterns can be seen in clavicle fractures. Most fractures are located laterally at the midshaft of the clavicle. Wedged segments are mainly located inferiorly, and at the posterior part of the clavicle, no comminution is ever seen. The direction of displacement depends on the fracture pattern.

Editorial Commentary: Do We Need to Treat All Lesions Operatively in Elbow Terrible Triad?

Arthroscopic reduction and fixation techniques in elbow surgery are evolving, and more and more literature is describing good outcomes of new arthroscopic fixation methods for coronoid fractures, lateral collateral ligament tears, radial head fractures, or capsular avulsions. The possible next step could be to use all these different techniques in cases in which all the described lesions can be seen. However, the question is if this approach is too aggressive. Although it is technically feasible to perform, this approach may not be necessary.

Clinical and radiographic outcomes of an all-polyethylene fluted central peg glenoid component, implanted utilizing an off-label, uncemented technique, at a minimum 5-year follow-up.

BACKGROUND: Glenoid component loosening remains an important concern in anatomic total shoulder arthroplasty. The aim of this study was to evaluate the clinical and radiographic results of a fully uncemented all-polyethylene fluted central peg bone-ingrowth glenoid component at a minimum 5-year follow-up. METHODS: Thirty-five shoulders in 31 patients (mean age, 73 years) with a mean follow-up of 100 months were retrospectively evaluated at an early and mid-term time point for Constant score (CS). Computed tomography visualized glenoid component fixation at both time points. RESULTS: Mean CS improved from 40 preoperatively to 66 postoperatively at latest follow-up (P < .001). A mean CS of 74 at early follow-up remained consistent with a mean CS of 66 at latest follow-up (P = .158), with only strength demonstrating a decrease over time (P < .001). An initial osseointegration rate of 81% at early follow-up decreased to 71% at latest follow-up with 74% of the shoulders demonstrating progressive radiolucent lines, resulting in a radiographic loosening rate of 31%. Of the 35 shoulders, 4 were revised (survival rate of 88%), of which 2 due to symptomatic aseptic loosening. CONCLUSIONS: Uncemented fixation of an all-polyethylene central peg bone-ingrowth glenoid was associated with satisfactory clinical and radiographic scores, and an acceptable revision rate at mid- to long-term follow-up. Despite initial bony osseointegration in the majority of cases, radiographic loosening over time remains a concern, potentially jeopardizing long-lasting fixation of this type of glenoid component when implanted in an off-label uncemented fashion.

Clavicular osteotomy in complicated revision of total shoulder arthroplasty: indications, surgical technique, and outcomes.

PURPOSE: Adequate exposure in revision of total shoulder arthroplasty (TSA) is important for optimal prosthesis placement and functional results. A clavicular osteotomy in difficult cases of revision TSA is a useful surgical technique that increases the superior exposure area, provides safer dissection, minimizes damage to the anterior deltoid muscle, improves glenoid access, and allows for superior dislocation of the humeral component. There is a paucity of literature analyzing the clavicular osteotomy during challenging cases of revision TSA. The aims of this study were to describe the application, surgical technique, and outcomes of revision TSA with a clavicular osteotomy. METHODS: This was a retrospective study of consecutive patients who underwent revision TSA with a clavicle osteotomy at a single institution (2004-2016). A curved longitudinal clavicular osteotomy is created parallel to the origin of the anterior deltoid muscle. This allows for lateral reflection of the osteotomy and anterior deltoid muscle to significantly increase superior exposure and reduce damage to remaining deltoid muscle fibres. Osteotomy closure is simple with four or five Nice knot osteosutures. The Constant-Murley score and osteotomy healing were assessed at every follow-up. All complications were reviewed. RESULTS: Forty patients who had a mean age of 63.8 years (range 37-87) at time of surgery and mean follow-up duration of 34 months (range 12-88) were analyzed. Pre-operative Constant-Murley scores improved significantly from 32 ± 19.0 to 58 ± 15.0 (p < 0.001) at one year and 65 ± 13.1 (p < 0.001) at two years. Primary osteotomy healing and callus formation were evident in 95% of cases by three months. Five patients developed post-operative complications (13%) related to the clavicular osteotomy: three mid-diaphyseal clavicular fractures sustained after trauma (8%), one clavicular stress fracture (3%), and case of one loosening (3%). Three patients (8%) required surgical revision of the osteotomy (two internal fixation and one revision osteosuturing). No neurovascular injuries or scapular fractures were encountered. CONCLUSION: A curved longitudinal clavicular osteotomy is beneficial in difficult revision TSA and is another tool in the arsenal of experienced shoulder surgeons who manage these challenging cases. This surgical technique increases glenoid exposure, facilitates superior dislocation of the humeral component, minimizes anterior deltoid damage, and reduces the risk of neurovascular injuries. All clavicular complications occurred within four months prior to osteotomy union, with many sustained due to trauma. However, patients who developed a complication had comparable shoulder function as those without.

The relationship of the acromion to the distal clavicle in normal and symptomatic degenerated acromioclavicular joints.

INTRODUCTION: Although degenerative osteoarthritis of the acromioclavicular joint is a common finding on technical investigations, not every patient experiences pain or function loss. The difference between symptomatic and asymptomatic patients is currently not elucidated. Therefore, we want to investigate the acromioclavicular relationship in normal, asymptomatic, and symptomatic degenerated ACJ. MATERIALS AND METHODS: 84 normal ACJ, 39 asymptomatic degenerated ACJ, and 30 symptomatic degenerated ACJ were 3D reconstructed. The morphological dimensions and the relationship of the acromion and distal clavicle were measured using computational software. The reproducibility of this technique was evaluated using inter- and intra-observer reliability. RESULTS: The mean anteroposterior and superoinferior distance of both the clavicle and acromion was significantly larger in asymptomatic and symptomatic degenerative ACJ compared to the normal ACJ (p < 0.001). In symptomatic osteoarthritic ACJ, both the anterior and posterior borders of the acromion were significantly more anterior to the borders of the clavicle than in the normal group and asymptomatic group (p < 0.001). Subsequent ROC curve analysis resulted in a sensitivity of 86.7% and a specificity of 88.6% for anterior subluxation of the ACJ. This technique showed an excellent inter- and intra-observer reliability. CONCLUSIONS: In patients with degenerative ACJ, both the distal clavicle and acromion are enlarged. In asymptomatic patients, the AC relationship is the same as in normal patients, in contrast, in patients with symptomatic degenerative ACJ, the acromion is subluxated anteriorly compared to the clavicle.

Latissimus dorsi transfer using bone block technique to restore active external rotation in reversed total shoulder arthroplasty.

The aim was to compare the outcome of a reversed shoulder arthroplasty with a latissiumus dorsi transfer without (LD-BB) or with bone block (LD+BB) in patients with rotator cuff-deficient shoulders and combined loss of active elevation and external rotation. Postoperative patients with LD+BB were not immobilized compared to 6 weeks of immobilization in patients with LD-BB. Clinical outcome was evaluated using the Constant Score, ADLER score and satisfaction rate. Also radiological follow-up of the bone-block was performed. In total 29 patients (21 LD+BB, 8 LD-BB) were evaluated. There was no significant difference between both groups at 3 months, 6 months and 1 year in clinical outcome. The radiological evaluation revealed remodellation and ingrowth of the bone block in all but one patient. We conclude that the bone block procedure is a safe technique to perform a LD transfer with good clinical outcome. It also allows early mobilisation and radiological evaluation.

A demographic study of acute injuries in basketball players.

Studies that analyse the epidemiology of acute injuries in basketball players in European countries are limited. The purpose is to present an overview of the incidence of injuries and injury patterns in Flanders and to correlate them to possible intrinsic and extrinsic risk factors. All acute injuries that occurred in Flanders during 2009-2013, collected by the insurance, were analysed. The incidence and parameters such as date of birth, date of occurrence of the injury, gender and diagnosis were evaluated. Injury incidence varied from 7.40% up to 8.45%. Females and players at age 16-17, 14-15 and older than 30 are at higher risk. The ankle/foot region is most frequently injured. There is a higher risk of injury after season-and Christmas break. Age, gender and chronometry are risk factors to get injured. Sprains are the most frequent, while the nkle/foot region is the most susceptible to injury. Studies that analyse the epidemiology of acute injuries in basketball players in European countries are limited. Female players and players at age 16-17, 14-15 and older than 30 are at higher risk to basketball injuries. The ankle/foot region is most frequently injured followed by lower arm and hand. There is a higher risk of injury after season-and Christmas break.

Evolution of nonoperative treatment of atraumatic sternoclavicular dislocation.

BACKGROUND: Atraumatic sternoclavicular dislocation (ASCD) is an uncommon pathology that is mainly diagnosed in young adults. The aim of this study is to better describe the clinical picture of ASCD and to describe the results of a "wait-and-see" policy in these patients. METHODS: All patients with ASCD who visited our department between 2011 and 2016 were retrospectively analyzed. A standardized clinical examination was used to evaluate the clinical picture. All patients were treated nonoperatively, and at latest follow-up, several parameters and standardized questionnaires (Nottingham Clavicle Score, Oxford Shoulder Score, Constant-Murley Score) were used to evaluate the outcome. RESULTS: In total, 23 patients (12 male, 11 female) were evaluated. The average age at diagnosis was 18.6 years. There was a significant difference (P < .001) in angle of dislocation during forward flexion (mean = 141°) compared with abduction (mean = 101°). At latest follow-up (average 46 months, range 14-113 months; standard deviation [SD] = 27), subluxations still occurred but were less frequent and less prominent relative to presentation at initial diagnosis in 19 of 23 patients. The chance of subjective improvement increased by 27% for each year of follow-up. High outcome scores of Nottingham Clavicle Score (mean score = 80, SD = 11), Oxford Shoulder Score (mean score = 44, SD = 4), and Constant-Murley Score (mean score = 83, SD = 11) were reported. CONCLUSION: In patients with ASCD, the clavicle subluxates earlier in abduction than in forward flexion. After a midterm follow-up, a "wait-and-see" policy does not resolve the subluxations. However, most patients displayed reduced frequency and severity of subluxations over their recovery period and showed excellent scores on shoulder questionnaires.

Long-term results of the Delta Xtend reverse shoulder prosthesis.

BACKGROUND: Reverse shoulder arthroplasty has become the standard treatment for cuff tear arthropathy and complex fractures of the proximal humerus. The Delta Xtend prosthesis (DePuy Synthes, Warsaw, IN, USA) was launched in 2006 and has shown good short-term results. Longer-term results are not yet available. METHODS: There were 126 primary Delta Xtend prostheses implanted in our center by 1 surgeon from October 2006 until December 2009. Of these, 38 patients died, 12 were lost to follow-up, and 2 needed early revision of the prosthesis. Follow-up of at least 8 years was available for 74 patients. At preoperative and postoperative visits, shoulder function and pain were evaluated using the age- and sex-adjusted Constant-Murley score (aCS). The satisfaction rate was evaluated on a visual analog scale (VAS). RESULTS: The mean follow-up in our population was 113.1 months. The mean aCS was 44.6% (standard deviation [SD], 19.2) preoperatively. It increased significantly (P < .001) after surgery to 75.8% (SD, 12.5) at 3 months and 91.1% (SD, 11.8) at 5 years. At the latest follow-up, the mean aCS was only 79.9% (SD, 17.7), which was significantly lower (P = .002) than the aCS at 5 years postoperatively. An overall survival rate of more than 97% was seen at 8 years of follow-up. CONCLUSION: This study confirms that the promising short-term results of the Delta Xtend prosthesis can be extended in the longer-term. However, further follow-up will be necessary to check whether the statistically significant decrease in the Constant-Murley score at latest follow-up, which was driven by a decrease in range of motion and power, continues or not.

Analysis of failures after the Bristow-Latarjet procedure for recurrent shoulder instability.

PURPOSE: Despite good clinical results and low recurrence rates, post-operative complications of coracoid process transfer procedures are not well understood. This study aims to evaluate the underlying failure mechanism in cases requiring major open revision surgery after prior Bristow or Latarjet stabilization. METHODS: Between January 2006 and January 2017, 26 patients underwent major open revision after primary Bristow or Latarjet procedure. Clinical notes and radiographic images were retrospectively reviewed for all cases to determine underlying pathology. Choice of treatment and clinical and radiographic outcome were similarly reported for all cases. RESULTS: The underlying failure mechanism was associated with non-union in 42.3%, resorption in 23.1%, graft malpositioning in 15.4%, and trauma or graft fracture in 19.2% of cases. Although none of the patients reported any dislocations, mean subjective shoulder score was 60.2% and WOSI scores averaged 709.3 points at final follow-up. Radiographic signs of deteriorating degenerative arthritis were seen in 34.6%. CONCLUSION: Graft non-union resulting in recurrent instability was the main indication for open revision surgery after Bristow or Latarjet procedure, followed by resorption, malpositioning, and graft fracture in this retrospective case series. Revision surgery consisted of a structural iliac crest bone graft in the majority of cases. Clinical and radiographic outcomes are predictably variable in this population of multioperated patients.

Defining the shape of the scapulothoracic gliding surface.

PURPOSE: The aim of the study is to evaluate the difference in shape of the upper part and lower part of the Scapulothoracic Gliding Surface (STGS). METHODS: 3D-CT images of the thoracic cage of 50 patients were created in MIMICS ®. Three anatomical landmarks (insertion m. serratus anterior on 5th rib; transverse process of 2th and 7th vertebra) were used as an anteroposterior cutting plane to define the STGS. The upper part of the STG was defined as rib 2-5 and the lower part as 5-8. Next, in MATLAB ®, a script was used to create the sphere with best fit for upper and lower parts of STGS. The Root-Square-Mean Error (RSME) (mm) between two closest points on the fitted sphere and the STGS of both parts were calculated to determine the goodness-of-fit. RESULTS: The RSME was found to be significantly lower for the area ribs 2-5 (mean 7.85 mm, SD 1.86) compared the area of ribs 5-8 (mean 10.08 mm, SD 1.90). CONCLUSION: The STGS of the upper thoracic wall (2-5) is more spherical shaped than the STGS of the lower thoracic wall (rib 5-8).

The dominant nutrient foramen at the clavicular midshaft: an anatomical study.

BACKGROUND: The aim of the present study was to describe the prevalence and topography of the dominant nutrient foramen at the clavicle. METHODS: 317 macerated human clavicles (167 right and 150 left) were available for the study. After detecting the dominant nutrient foramen, the total distance from the sternal surface to the examined nutrient foramen was measured. A foramen index (FI) was used for further data processing. RESULTS: We detected a dominant foramen in 300/317 (94.64%) clavicles, which was located in the middle third in 287/300 (95.7%) clavicles. The average clavicular length was measured at 14.9 cm ± 1.0 cm (range 11.6-17.5 cm) with an average foraminal distance from the sternoclavicular joint surface of 7.9 cm ± 1.3 cm (range 0.9-12.6 cm) in total. The mean FI was 53.2% ± SD 7.4% (range 5.5-79.3%). CONCLUSION: The present study provides a topographic mapping of the foraminal area (46-60% of the total clavicular length). The findings help to assess clavicular fracture patterns, which pass through the foraminal area.